How to put a trimmer on your shoulders

Sixth way “butterfly

For a spider-web stole, the method that is called “butterfly” is great. In order to tie a stole in this way, you should throw a cape around your neck, twist the loose “ponytails” 2-3 times, straighten the ends and lay them on your shoulders.

Seventh way

Girls who prefer a strict style should like the following option. Throw a stole around your neck, tie a weak knot at one free end, and then thread the other free end of the cape into it. In this case, you can use a simple silk scarf instead of a stole.

12 successful ways to wear a stole

Fashion for stoles appeared in Great Britain during the reign of Queen Victoria. Since then, this wardrobe item not only protects from the cold, but also acts as a great addition to any clothing. from a coat to an evening dress. A fine cashmere stole can also be used as a headdress.

The stole is a wide cape made mainly of dense fabric or fur. In this article, we will look at several stylish and effective ways to wear a stole.

Ninth way

Try simply draping the stole over your elbows as well. Capes made of flowing or transparent fabrics will look especially exquisite. This option for wearing a stole can add grace to the look of any woman.

Eighth way “with an evening dress

A solid-colored stole made of transparent light fabric is perfect for an evening dress. Throw a scarf over your shoulders, experiment with variations of the fall: open both shoulders, or just one, pin it off with a brooch. Do not forget that for an exquisite look, it is necessary not only to successfully tie a stole, but also to choose a suitable color that can complement the overall look.

The third way “eyelet

The next way to wear a stole is called an “eyelet”: the stole should be folded twice in width and put on the back of the neck. The loose ends must be folded together and threaded through the resulting loop.

Fifth way

Many women like to replace the usual rectangular stoles with large handkerchiefs. For such girls, the following option is perfect: the scarf should be folded diagonally, put on the head, the free ends should be thrown back and tied with a weak knot. Then the scarf needs to be thrown off the head and the resulting “construction” twisted by 180 degrees.

The first way

The easiest way to tie a stole is to throw it around the back of your neck, and throw one free end over your back. In this case, the width of the stole can be almost any, however, narrow or at least double-folded capes still look the most beautiful.

How to tie a scarf on a hooded garment?

• How to choose a scarf for outerwear?
• How to tie?
• Down jacket
• How to tie?
• Fur coat
• How to tie?
• Coat
• How to tie?
• Sheepskin coat
• For men
• Images
• Youth
• Graceful image
• Stylish
• Romantic
• Everyday

A scarf is a wonderful accessory, it will easily complement your image, giving it style and completeness, shade the color of your eyes, emphasize individuality and elegance. But, if you pick it up incorrectly, it will just as easily ruin your image.

How to choose a scarf for outerwear?

Today, many scarves have appeared. light and warm, wide and narrow, monochromatic and variegated. Shawls, stoles, snoods, knitted, silk, woolen. how not to drown in this variety and choose what is right for you?

Here are some simple tips:

Red Silhouette challenge. put your head on my shoulder x streets (lyrics) (TikTok Remix)

National dress

If you don’t like anything from animal images, and therefore you still don’t know how to dress up for carols, then you can always wear a national costume. You will need a shirt or embroidered shirt, a skirt made of red or blue fabric, an apron, a wide belt that you can make yourself from any piece of fabric, a sheepskin coat will also come in handy. They can be a sheepskin coat, fur coat or other fur products, the main thing is that the national flavor is visible. On the head there may be a scarf in bright colorful colors or a hoop made of flowers. It can be assembled by yourself. For the base, a regular hair band is suitable, on which artificial flower buds must be attached using a glue gun or “Moment”. The wreath can be made using colored paper. Decor of small flowers will be just right.

Images of animals

The most popular Christmas costumes are images of totem animals. Dressing up is a fun addition to Christmas carols. How to dress up? The answer to this question will tell the inner mood. After all, a suit is just a part of a complete image. Most often they dress up as a bear or a goat, but a deer or spirit is also popular. No special design skills are required to create a costume. For example, for a goat, a sheepskin coat, turned out seamy side up, is quite suitable. so the traditional sheepskin coat is ready.

A light-colored astrakhan fur coat is also suitable. You must wear a goat mask on your face. If you can get some horns somewhere, then the suit will not be equal. You can do them yourself. For example, saturate paper with PVA glue and roll it up, giving the required shape. The goat has small horns. Such a beauty is usually brought into the house, then in verses and songs they ask for a present.

How to dress up for carols? Find out!

Would you like to know how to dress up for Christmas carols? We will now look at some interesting options. An old tradition that has survived to this day accompanies every Christmas and is called, of course, carols. On a festive evening, people gather in a friendly company, sing songs, and also dress in a special way and, grabbing a bag for gifts, go to the neighboring houses. How to dress for a carriage is very colorfully described in the works of Nikolai Gogol.

Additional attributes

When thinking about how to dress up for carols, you should prepare additional attributes for fun. For example, a tambourine, bells, staff, and a canvas bag. All of these items are not that hard to find. A tambourine can be borrowed in a kindergarten group, there is always enough of this stuff. The staff is easy to build from a mop stick or floor brush. It is best to glue it over with holographic bright paper or tape. Bells can be attached to the very top so that when they hit the ground, they make a ringing sound. And of course, the main symbol of the holiday is the Star of Bethlehem. It can be made of foil and fixed on a pole.

How to dress for a stroller? If the image of a bear is chosen from all the options, then you should not worry about the whole costume. For getting used to the role, a fur cape on the shoulders in the form of a skin is very well suited. If you can find a hat in the same design, then the costume will only have to be supplemented with a bear mask on the face. Of course, in the case when there is a real skin, and even with a clubfoot head, the image will be flawless. It will be appropriate to wear brown or black leather gloves on your hands. It is better to give a tambourine to the bear’s paws, tied with bright satin ribbons.

Deer

Who else can you dress up for carols and, most importantly, how to make a costume? Can. deer. A brown fabric is suitable for a suit, from which you can sew a head and a cape on the chest. The eyes are made of sewn-on buttons. The nose and mouth can be drawn with a felt-tip pen. It is convenient to make the horns from fabric, and stuff it inside with padding polyester, cotton wool or silicone filler.

Also in addition, leather gloves will be good. Similarly, you can sew a horse costume. Black, gray or brown fabrics will do. The head is sewn exactly according to the same principle. The mane can be made of fur, lace fabric, curtain fringes or other material. It would also be nice for a horse to make a torso. To do this, the fabric is simply sewn from three panels. Their length should be designed for two people, and the back will be in the suit in a bent and forward tilted state. The width of the back is taken approximately along the span of the shoulder.

Now it is clear how to dress up for carols. Having come up with your own costume, then bringing the idea to life, you should get the whole company together. After putting on festive looks, you must remember to take all the necessary attributes. It is also better for everyone to sing together, and at the same time repeat the carols that you are going to sing in a friendly company. Sometimes the voices and musicality of the performances of ordinary people amaze to the core.

But the hospitable host will never skimp on gifts and treats, and, most likely, will show financial generosity. For such a cause, as well as for the fun itself, it is worth preparing and trying hard. Christmas is a magical period with a special mystery of what is happening.

Attaching the lawn mower to the belt

Depending on the model, the petrol braid can be fastened to the belt using a strap or loop. In the latter case, for balancing, you need to move it along the bar in order to get the desired result. In some cases, damping mechanisms are provided to reduce vibration and soften the sharp jumps of the trimmer.

Adjusting the shoulder straps

To distribute the load evenly over the shoulders and back, the shoulder straps need to be well adjusted. To do this, it is enough to tighten or relax the straps. they should not dig into the body or hang down. You can understand how the weight will be dispersed if you press the hook for hanging the scythe with your own hands.

Balancing the braid by moving the eyelet

After fixing the required height for yourself, you need to balance the trimmer. For this, the eyelet is rearranged, with the help of which the device is suspended from the belt, forward or backward. As a result, you need to attach the belt to the trimmer so that when you release the steering wheel, the knife or saw blade does not lie on the ground, but hangs above it without touching the surface. At what distance it will be located depends on the goals set.

Advice! A distance of 20-30 cm above the ground is suitable for mowing tall grass, and for lawns you need 5-10 cm.

What is a backpack strap

It should be understood that the weight of a filled lawn mower is on average 6-9 kg. And this device must be kept in limbo all the time. To evenly distribute the load, the backpack strap seems to encircle the body from all sides. The main load falls on the shoulders and back, so its upper part is supplemented with wide foam inserts and fabric straps. Further, the straps are lowered along the body and, with the help of a quick-release clip, are connected to each other in the chest or abdomen area. And so that the belt does not cut into the body during load, a wide and durable lining is provided. A plastic leg guard is attached to the belt. It has a carabiner for attaching to the trimmer and spring cushioning. The ease of unfastening and fastening the lawn mowers is provided by a quick release latch located on top.

On a note! Different models of backpack belts may differ in the design of locks, carabiners, the presence or absence of additional pads and latches. However, the principle of the device and work is the same for them.

Safety regulations

Among the safest and most popular trimmers, products from German manufacturers (including Denzel) are especially appreciated, as they pay increased attention to quality and reliability. However, despite the brand and model, there are a number of rules that you need to clearly know and follow when using a trimmer.

• Before use, it is necessary to read the instructions for use.
• You can not work with the trimmer in a state of fatigue, illness, intoxication.
• It is forbidden to use the scythe in explosive and fire hazardous areas.
• Do not mow during thunderstorms and rain, or after rain, when the grass is wet.
• You can work only during daylight hours, in good light conditions.
• Use only the type of fuel and lubricant that is suitable for the particular trimmer model.
• It is not recommended to repair the instrument yourself.
• Do not touch rotating or heating elements during operation.
• Do not smoke and light a fire while mowing, etc.

Important! When using the trimmer, there are other factors that are harmful to health: increased noise level, vibration, exhaust gases, high temperature of some parts, flying branches, etc. To minimize risks, you need to use overalls, glasses and headphones.

If you still have questions about the adjustment on the backpack belt of a particular lawn mower model, you can try to find the answers in the instruction manual attached to the product, or watch a video on the Internet, where it is clearly and easily shown how to set up and adjust the belt together with the lawn mower.

Belt adjustment

To provide yourself with comfortable working conditions, you need to be able to properly put on a backpack strap. This process requires some skill, but then, after adjusting the backpack for yourself for the first time, it will be much faster and easier to put on.

Hook height adjustment

The most important thing is to adjust the strap so that the trimmer is at the correct level from the ground. To do this, raise or lower the height of the hook, which is done by tightening the shoulder straps until the holder is 10-15 cm below the hips (palm width). In this case, the knife of the attached braid should be parallel to the surface, that is, in a strictly horizontal position.

On a note! Attaching the trimmer too high will severely restrict grass grip.

Trimmer Backpack Strap. Intended Use

Many trimmer models are equipped with a regular oblique strap. For the job, however, it is best to purchase a backpack strap that is specifically designed for lawn mowers. Thanks to its clever design, it distributes the weight of the device evenly over the entire body. Padded shoulder pads reduce weight and relieve pain in the forearms. The rigid backrest distributes the load between the upper and lower back, excluding the lower back. The shock-resistant thigh protector prevents the mower from contacting the foot, so that it does not rub or transmit vibration. In addition, the belt provides:

• convenient transportation of the trimmer;
• comfort during operation due to the ergonomic position of the scythe relative to the body;
• work safety. the knapsack belt prevents the lawn mowers from slipping out of the hands when hard objects get under the knife.

How to put the disc on the trimmer correctly

How to mow with a trimmer (with a metal knife)

Walk around the site first.
a) to determine:
– the boundaries of the area where you will mow with the trimmer;
– where are the plants in the grass that cannot be cut (flowers, bushes, seedlings);
b) to determine the starting point (you need to start mowing with the trimmer from the lightest area in order to create an open space so that when moving into larger grass it is better to see the mowing area);
c) to determine the direction of mowing with the trimmer (depending on the presence of ditches, slopes and slopes of the grass);
d) to determine how to cut with the trimmer:
– in folds. if the area is flat with flat grass (so that there are fewer transitions);
– with the transition back to a clean place, when mowing lodged grass (its slope should be directed forward);
– mowing across a large slope (it is much easier to cut across a slope with a trimmer than going up and down a slope).

We put a metal knife: weed or hay. Protection, i.e. knife guard, obligatory (without additional protection for the trimmer head)
– to mow with a trimmer, it is necessary to assemble in order: a driver chuck, a metal knife (it must be put without skewing), a support cup, a fastening flange and screw on a nut (left-hand thread);
– insert the locking pin and turn the metal knife to lock the output shaft of the Husqvarna gearbox;
– tighten the nut with a wrench with a force of 3. 5 kg / m;

When mowing with a trimmer with a metal knife, you need to set:
– the speed of the knife, depending on the irregularities (to mow with the trimmer cleaner and faster);
– working grip of the disc: between 8 and 12 o’clock (when the knife moves to the left);
– reverse (can be working, cleaning up or idle);
– gas (by load);
– on an even level: the angle of inclination of the knife and the width of the mow (more);
– cutting height (to make it easier to mow with a trimmer or to make it cleaner);
– where to move (along the ditch, along the slope of the grass, on the site);

11 o’clock) and to the right with an inclination of the handles to the right (sector

1 hour), and take your time. to mow with a trimmer neatly and not to “dig” the ground;
– during work (and turns) do not forget to look around !:
1.To notice the gestures of others, turn off the engine and remove the headphones,
2. so that children, animals, spectators and assistants do not come closer than 15 m. when a metal knife collides with a stationary object in the grass, the trimmer or lawn mower (lawn mower) can be strongly thrown to the side or turned back, and the maximum speed of the metal knife is 10,500 rpm. and he is able to cut off an arm or a leg,
and also, when cutting with a trimmer, various objects (rubble, glass, debris) can fly out and ricochet out from under the metal knife.

How to mow with a trimmer correctly (more about mowing technique).

Engine speed when mowing with a trimmer is set depending on the load on the engine. the thicker the grass and, naturally, the heavier the engine, the bolder you need to open the hole (throttle valve in the carburetor diffuser).
Try to keep the engine operating speed constant while cutting with the trimmer (slightly above average). or less gas. only depending on the total load on the engine. There is no need to completely dump the throttle (and immediately accelerate again) with each sweep of the streamer. So it does not take long to burn the clutch, and it can overtake the edges on the drive shaft. and the overall wear of the trimmer (lawn mowers) increases dramatically.

We find out the parameters of the site before mowing with a trimmer:
(to know which knives to take, how much fuel and time you need)

Trimmer belt. How to adjust the knapsack trimmer belt

Adjust the height of the hook of the backpack trimmer belt by tightening the shoulder belts so that the trimmer blade lowered to the ground is parallel to the surface of the site (strictly horizontal).
When using the trimmer saw blade, adjust the hook height (by tightening the shoulder straps) so that the trimmer saw blade is tilted slightly forward relative to the ground.

Adjust the trimmer so that when you release the steering wheel, the trimmer knife is close to the surface of the area, but does not lie on the grass when you move the braid ear to the trimmer strap.
To cut bushes and young trees with the hedge trimmer’s saw blade, the trimmer must be balanced so that when the steering wheel is released, the machine hangs on the hook horizontally to the ground. Attach.

Adjust the trimmer shoulder straps (harness straps) so that the load is evenly distributed over the shoulders (check by pressing the hook of the trimmer harness with your hand).

How to Fix Rounded Shoulders (GONE IN 4 STEPS!)

Husqvarna trimmer backpack video. On the design features of the belt suspension (harness) that make it easier and safer to mow with a lawn mower, trimmer, lawn mower, Husqvarna hedgecutter. wide shoulder straps and an elastic waist belt, quick-release locks (carabiners) in case of fire or any other situation requiring quick release from the trimmer. On the versatility of belts for men and women.

These Husqvarna Trimmer Backpack Belts (Balance 35/55, Balance X, Balance XT) can be used on all trimmers, lawn mowers, lawn mowers, electric mowers, brush cutters.

Recent comments

How to put on the trimmer belt video

Brush your teeth properly after eating

When should you brush your teeth: before breakfast or after? Surely everyone knows that you need to brush your teeth twice a day. Imagine a morning without

See how to properly clean pomegranates

How to properly peel pomegranates. Video Description: In hot and sunny Georgia there is such a custom: if a young man is in love with a girl,

Mowing tall grass

If you need to mow tall grass, this is done in several passes. The lawn is processed 2-3 times. The rotating part is lowered from top to bottom, in this case the grass does not wrap around the reel.

The operator should be aware that grass wrapped around the reel will overheat the motor. If this happens, the mower is turned off and the coil is cleaned.

It is most effective to cut the grass with the ends of the line rather than the entire length. In the second case, the tool works worse, the motor may be overloaded. If you need to cut grass over a large area, tilt the trimmer towards the mowing side to increase efficiency.

How to use the trimmer correctly

Garden trimmers are efficient. Newbies think it’s easy to operate a lawn mower by plugging it in or adding fuel, but that’s not entirely true.

The efficiency of the garden tool and its service life directly depend on the operating conditions. Therefore, before using the trimmer, you need to do some preparatory work.

The lawn from which you need to mow the grass is carefully examined. Glass and large stones must be removed. When flying out from under a running mower, they can injure a person. Wire is removed from the lawn, because it can wrap around a rotating element, break the mower.

After that, proceed to the installation of the cutting system. There are low power trimmers on the market that use only line. It is designed for cutting juicy and soft grass. But there are models with a capacity of more than 1 kilowatt, on which metal knives are installed. They cut off sow thistle and other hard weeds, trim young shrubs.

In order to replace the cord with knives, you need to unscrew the fastening nut, install the cutting element. Then the nut must be returned to its place, tightened with a wrench.

The operator must take care of his own safety. Mow the grass in heavy protective clothing. Special goggles are used to protect the eyes; they will protect against dust, grass and flying debris. Hands are covered with gloves.

The electric trimmer is plugged into the network, and battery models are charged for several hours before use. Fuel is poured into a gasoline mower.

Hold the mower with the spool or knife parallel to the ground. When the tool is in the correct position, turn on the motor. Turn off the mower after the grass has been cut.

How to refuel the gas trimmer

Gasoline lawn mowers are available with two-stroke and four-stroke engines. The first option is much more common. What are the differences between them:

• trimmers with a 2-stroke engine have a faster response to pressing the engaging lever (for this reason, lawn mowers are mainly equipped with this type of engine);
• a tool with a two-stroke engine will be much lighter and also easier to maintain;
• fuel consumption of a two-stroke engine is about 30% higher than that of a 4-stroke engine with the same power;
• 4-stroke engine is more environmentally friendly, since the fuel in it burns completely and is not emitted into the atmosphere, and its noise level is much lower;
• and the most important distinguishing feature is the refueling: 2-stroke engine is equipped with one common tank, where gasoline mixed with oil is poured; 4-stroke has a separate gas tank and a tank for engine oil.

For refueling, you must use fresh AI-92 or AI-95 gasoline and high-quality motor oil for garden equipment (manufacturers produce different oils for 2- and 4-stroke engines). The oil can be used mineral, semi-synthetic or synthetic.

The proportion of gasoline and oil for 2-stroke trimmers can be found in the operating instructions for the particular model. Usually it is 50: 1, in some cases a ratio of 25: 1 or 40: 1 is recommended. It is necessary to prepare the fuel mixture in a separate container with exact proportions. Never pour liquids “by eye” directly into the tank without first mixing them. Detailed instructions for mixing gasoline oil, with video and descriptions, can be found on our website here.

Running in

Before starting operation, be sure to run in gasoline mowers. The operator turns on the motor, it should run for a while at idle speed. Care must be taken that the engine does not overheat, there should be no load.

When running in lawn mowers, the load is gradually increased. If you start working at high speeds, the motor will not work well, this will affect the further operation of the mower.

When you start it for the first time, you should not completely use up the temporary resource. After the engine runs at idle speed, you can proceed to treating the lawn. the lawn mower should run no more than 15 minutes, after which the motor is turned off, it should cool down.

If you need to run the trimmer, the braid is first assembled. Then test runs are made at least 3-5 times. If the engine is running well, proceed to mowing. At first they work no more than 5 minutes, then the duration of work is gradually increased.

First start

Before the first start-up, the operator assembles the mower, the procedure is described in the instructions that come with the product.

If the trimmer is gasoline, it must be checked before use. The fuel tank is filled up to the neck.

The motor must run in to the fuel, so the first time it is started, it must run for a few minutes without load. Then start mowing the grass.

How to cut your lawn to keep it smooth

In order for the lawn to be cut evenly, the mower must be lowered as low as possible during operation. The plot must be divided into squares. You need to work moving clockwise. In this case, the hay will always lie on the left without getting in the way.

We mow under hay

It is better to mow hay not with a fishing line, but with a metal disc. The grass is cut at the root, keeping its length as much as possible.

Wet Weather Operation

Electric mowers must not be used in the rain, there may be a short circuit. When the precipitation stops, you need to wait for the grass to dry.

Not all gasoline mowers are protected from moisture, therefore some manufacturers prohibit the operation of mowers in the rain.