How To Put Line On A Lawn Mower

than 200 types of trimmers in one place at the lowest prices. Click and watch

Now, having removed and disassembled the coil, we proceed, in fact, to winding.

Automatic line winding to a spool

There is a type of reel in which the automatic mechanism winds on its own. from the user it is enough only to correctly fill the line. The fishing line is passed through a hole on the inner part of the body, its antennae without winding are passed through the hole on the outer body, the reel is assembled, and when the winding button is rotated, the fishing line inside is wound independently. In such a spool, it is impossible to make the winding wrong: the mechanism itself will determine the correct direction, since it can only rotate in one direction.

Trimmer head with two antennae

Double flute head

After removing the spool from the spool body, we determine the number of strands for winding the line (1 or 2). There is no fundamental difference between bobbins with one and two grooves, but if carelessly threading into the twin groove, there will be operational problems. Due to the likelihood of interweaving adjacent lines of the tool, a situation may arise when, after wear of the working antennae, it is impossible to remove new.

Regardless of the number of streams, a fishing line with a length of 1.5 to 3 meters is taken for refueling. Winding must be done in the opposite direction to the rotation of the head, since winding in the direction of travel will lead to the fact that the line will not be removed from the reel. After the fishing line is tucked into the trimmer coil, thread the free ends (15-30 cm) into special holes. Next, we assemble the head in the reverse order of disassembly and check the operability. Do not worry if the ends of the two antennae are very different in size, because when you start the trimmer, the knife installed on the protection will cut off the excess.

We wind the fishing line

Slowly completed disassembly of the spool-spool without losing its spare parts allows you to proceed to the main task. winding the fishing line into the reel. Technological features of the spool design and the number of working antennae determine the sequence of actions.

How to wind line on a trimmer reel: key points

A gasoline or electric trimmer is an indispensable tool in the arsenal of a modern summer resident or owner of his own home.

Thanks to these gardening devices, even a large garden plot can be mowed with ease. After purchasing this tool and performing several mows, many people think about how to properly wind the line on the trimmer reel. For an inexperienced user, the first operation to replace it will seem problematic and time-consuming, since the developers often do not fully reflect the instructions for replacing the fishing line in the operating manual.

Preparation for winding the line

Before the winding process, it is necessary to remove the spool with line from the body. Depending on the manufacturer, power and type (electric or gasoline), there are three design types of trimmers:

    Compact Electric Trimmers.

Straight bar trimmer

This model provides the ability to install a knife. Removing the coil in such models is done by means of two keys recessed into the coil body. To mount the trimmer knife, it is necessary to align the hole of the reel and the rod, and then insert the device in the form of a steel pin (screwdriver, iron bar). After fixing the coil, the body can be easily unscrewed by hand in a clockwise direction.

Single-barbed trimmer coil

Single-barb lawn mowers reel

Many owners and experts note the ease of use and ease of refueling the bobbin with one mustache. Depending on the manufacturer, the length of the threaded line can vary from 2 to 5 meters. The end of the line is inserted into the head into a special technological groove or hole, and the winding is carried out in the direction opposite to the working rotation of the bobbin. Most reels have arrow marks on the outside of the body that indicate the direction of travel of the trimmer reel.

After winding, you need to leave a free end of 15-30 cm to enhance the centrifugal force, which is decisive when removing the trimmer line in automatic and semi-automatic spools. We pass the left end through the working hole of the coil and assemble the head.

How to wind the line correctly on the trimmer spool?

Despite the fact that gardening equipment has been used for quite some time, it is still a novelty for some owners of private houses. That is why there are often questions about how to properly wind the line on an electric or gasoline trimmer.

This is essentially a simple operation, but all its stages must be performed correctly in order to achieve the desired result. over, in the operating instructions, only a few manufacturers provide an answer to this sore question. Explore the article and find out how the line winds around the trimmer reel.

How to insert line into the trimmer spool? Instructions

The warranty production of the factory trimmer refueling will inevitably require line replacement. Having a very rough idea of ​​how to thread the line into the trimmer reel on their own, beginners are reluctant to take up this business. However, with some skills, mastering this simple science does not present any difficulties, and the similar instruction presented below will make this process as easy as possible.

READ  Lawn Mower Petrol Self-Propelled Will Not Start

How to reel fishing line

Fishing is a really exciting and exciting business. Beginner spinningists, of course, want to quickly join it and finally get a sensible result. The reservoir where you are going to fish has been selected, all the necessary accessories have been bought. There are rods, reels with lures and lines. too. However. even a minor, but still tangible nuisance can wait right on the shore, which sometimes completely disrupts the whole fishing.

Her name is winding a fishing line on a reel. Each coil seems to be equipped with an instruction with a basic diagram. But the fact is that with such an attitude, it will not be possible to catch much for sure. If the loop is wound incorrectly, the loop can be thrown off, and instead of removing the fish from the hook, then you will have to bother with untangling a lump from the fishing line with your own hands.

They start using spinning most often with tackles that are shorter (both reels and rods). The caliber of the bobbin in them is two to three thousand (that is, a hundred-meter line is not more than a third of a millimeter thick in this case, the limit). The winding structures can also be very different: this is a chaotic winding in a chaotic arrangement of Chinese samples (more or less suitable for monofilament, but completely inappropriate with braided line), and such more professional formats as a straight cylinder, straight and inverted cone. And from the very beginning it is better to get used to those types of styling that are more serious, because this is not a whim, but a higher efficiency. Having saved a few hundred rubles in passing, you will then begin to curse everything in the world, when, instead of casting and biting (well, or just casting and waiting), fishing turns into a continuous struggle with “beards” and other overlaps of the line. Such fishing has never brought joy to anyone.

How to quickly wind a line on a spinning reel

The main, fundamental rule is that the equipped line must be flat, like a ruler. For cylindrical winding, a straight line is optimal, and if a cone is chosen, then an inclined one. But in any case, remember firmly, only the line without bends.

How can this leveling be ensured in practice? First of all, we attach the bobbin to a fixedly placed rod-shaped object, on which it should scroll easily and freely. Pencils and knitting needles, pens and screwdrivers, small metal tubes without sharp edges, and even a smooth and well-polished stick can act as a rod. As a last resort, find someone who agrees to hold.

Pull the line through every single rod ring. Tie a knot at the extended end. Now you can start threading the line to the surface of the reel. First, we fasten it over the bobbin in a circle, having previously lifted the arch of the line stacker, and when another knot of the “Arbor” type is tied and tightened, the arc can be lowered.

Braided line loves to slip very much. This can be avoided by prying a piece of rubber under the attachment point (for example, cut from an unusable fingertip or worn-out glove), in extreme cases. support it with adhesive plaster, if there is no rubber.

And now comes the turn of the line winding. Turn the handle on the spool neatly and evenly. Make sure the line is tight all the time. It is imperative to support it, but only in tight gloves.

When winding up, avoid, as much as possible, ending it at the level of the bobbin edges. If you do not follow this rule, then self-resetting of loops or their eerie entanglement becomes very likely. To avoid such an outcome, pay attention that at least a millimeter or two of the fishing line remain unwound to the side. On the other hand, exceeding the gap of five millimeters can make long-range casting impossible. Backing is a preventive measure (in fact. winding up the bottom of the main line of the auxiliary line, no thicker than three tenths of a millimeter, otherwise an even laying will become unattainable). Please note that almost all threads work well in backing, except for long-drying cotton and nylon.

See useful: how to wind the line to the reel correctly

Determining how much fishing line to throw on backing is possible only by experiments, there are no ready-made formulas and theoretical provisions on this score. One more bobbin is required. We wind the main forest on it, then backing (do not forget about the gap from the side). Next, we attach the main mount, to which we are already introducing the lines in the reverse order. Visit our website and read more useful tips for fishermen.

Device in the mower

In the trimmer, the element on which the string is pulled is very simple. It is called the “coil”. It usually consists of an upper and a lower part (grooves), between which a partition with a recess passes. It is on these grooves that the fishing line should be wound. However, first it is pulled through the recess.

READ  Lawn Mower Gasoline Self-propelled Honda With Button Starts

Before removing the coil, unscrew the special button located directly on the mower body. Remove the reel from the mower before changing the line.

It is not difficult to do this, but there are some peculiarities depending on the trimmer configuration and the coil itself.

In small electronic mowers, the motor and reel are at the bottom, and buttons are located on the sides of the reel. If you press them, you get the upper groove of the reel and the part where you need to wind the fishing line.

In bent-arm lawnmowers that do not have a knife, the reels have special two-horned nuts. In such tools, you must hold the bobbin so that it does not move, and at the same time turn the nut clockwise. It is she who holds the entire reel, which is then easy to remove.

Straight boom mowers that can be fitted with a blade have a hole just below the reel. To remove the coil, a screwdriver is inserted into this hole, while the bobbin is fixed. After that, you need to turn the coil clockwise and remove it from the unit.

Sometimes there may be latches on the coil. They must be pressed to separate the parts of the coil. It is also possible that the top and bottom of the bobbin are connected by a thread. In this case, it is enough to grasp the top and bottom with your hands, and then twist in different directions until they unscrew.

How to reel?

Knowing how the reel is disassembled can speed up the line change process. It all depends on what design the coil has and how many antennae. Threading into a spool that has only one working mustache is quite easy, especially if you stick to a consistent plan.

Depending on the parameters of the reel and the length of the line set initially, it is recommended to choose a string from 2 to 5 meters.

First you need to remove the bobbin from the tool, and then open it.

One of the ends of the line must be installed in the hole inside the bobbin.

Next, the string should be wound onto the drum. And this is done in the opposite direction from the normal rotation of the spool. Usually on the trimmers on the inside of the bobbin there is an arrow that shows in which direction to wind.

Part of the line must be pulled out and fixed in a special groove located on the inside of the reel. Its purpose is to hold the winding while bringing the bobbin into working condition.

The end of the string must be passed through the hole on the outside of the bobbin.

At the last stage, you need to collect the parts of the bobbin and put it on the mower bar.

The installation of the line on a reel with two mustaches occurs in a slightly different way. First, you need to determine how many grooves go along the inside of the reel on which the line is put. There are options with one groove, and then both mustaches must be wound together. There are also models with two grooves, when each of the mustache goes separately.

Lawnmower fishing line: how to choose and wind?

With the arrival of spring, summer cottages become the main residence of many of our compatriots. However, with the arrival of warm days, there is such a problem as fast-growing grass. It is inconvenient to constantly mow it with a hand scythe, and not all types of grass lend themselves to this old working tool. It is much more convenient to use modern lawn mowers for these purposes. Particularly popular among them are devices with a line, which is easy to change if necessary.

In the model with one groove

The line must be pulled through the hole, and its mustache must be folded together and aligned.

Then winding is performed in the opposite direction to the rotation of the bobbin on the mower. Often there is an arrow inside the spool indicating how to put on the line correctly.

The ends of the string are fixed in special grooves or simply temporarily held by hands and pulled into the hole located on the outside of the bobbin.

After that, the spool is closed and attached to the rod, after which the mower is ready to work.

How to choose the right line?

Nylon lines are suitable for both electric and gas powered trimmers. This consumable can be used for both hand tools and a wheeled lawnmower. It is important to choose the right line, as this directly affects both the result of the work and the service life of the unit. Of course, it is very easy to get confused in the offered assortment of lines, especially for beginners. However, there is a lot of advice from experts and those who have already tried various options.

How To Put Line On A Lawn Mower

For an electric trimmer less than 500 W, a thin line with a diameter of 1 to 1.6 mm is suitable. She will perfectly cut lawns with low grass. If the power of the tool is in the range from 0.5 to 1 kW, then it is better to give preference to a line with a diameter of 2 mm or slightly more.

READ  Changing the line in the AL-KO trimmer

For petrol trimmers and lawn mowers, line less than 3 mm must not be taken. This thickness will make it easy to cope with any weeds, dry stems, dense grass. Diameter over 4 mm is only suitable for high power lawn mowers. It turns out that thick line is necessary for powerful technique. It is not recommended for use with low power trimmers, otherwise it will not work well, constantly winding around the reel and creating additional load on the engine.

Typically, a standard package contains up to 15 meters of line. However, to replace the string on a reel, a length of about 7 meters is sufficient. It also happens that the line is produced in bays of 250-500 meters. When choosing a string, it is imperative to specify the date when it was produced. Too old nylon can shrink and become too brittle. If this happens, then you can soak the line for a couple of hours in water, but it will not be completely the same.

When choosing, an important parameter is the section of the string, which can be of several types.

The round section is versatile. It is used for mowing grass of medium thickness and density. May make excessive noise during operation, but not used too quickly.

A square or polygonal section is more efficient than a round one. Sharp corners cut plant stems faster and with better quality.

Ribbed, twisted and star-shaped sections are the most effective. Such a fishing line manages to mow the grass very quickly. And its main disadvantage is its rapid wear.

The trimmer line is made of nylon, which is durable, lightweight, low cost and durable. To make the cost of the material even cheaper, polyethylene is added to it, but then the line overheats faster. Thick strings have a graphite or steel rod. Sometimes they are reinforced, which increases strength and service life.

Version with two grooves

The line is first folded in half to determine where the middle of the fold is.

Next, the loop formed at the bend is threaded into the groove, which is formed between the two grooves.

After that, you can wind both bars of the line in a separate groove.

You can fix the mustache and assemble the coil completely in the same way as described above.

Opening a reel for the first time and winding a new line is not always easy. Over time, this procedure becomes almost automatic and will not take much time. Some reels have an automatic system that spins the line by itself. As a result, it remains only to correctly set the end of the line, and you’re done. In such models, the string must be put in the hole that is on the outside of the body. Next, the bobbin is assembled, and when the winding rotates, the fishing line is put on it.

Safety engineering

Following safety precautions will allow you to quickly and safely insert new line into the spool on the mower. It is imperative that before the replacement begins and the coil is removed, the device must be turned off, especially for electric lawn mowers. It is important to constantly remind yourself to press the special lock button. On each mower, it can be located in different places, but this must be indicated in the instruction manual.

Remember to adjust the cutting element. Otherwise, the work will be unstable and of poor quality. Most often, there is a button on the unit itself that allows you to configure this. If nothing happens when you press it, or the string has loosened its tension, then you need to hold down the button and pull the line out of the reel with effort.

Line winding is a very demanding process. It is important to follow all the steps correctly in order to tighten the line well. Materials other than special nylon strings should not be used. It is worth remembering that you cannot put a metal wire, a rod or an iron cable instead of a fishing line. This is dangerous, as the rig can very easily cut through the shoes even of coarse material and injure the wearer. Before putting on a new line, it is important to carefully read the operating instructions for the device, since some models of lawn mowers may have their own structural features, which are important to consider when replacing.

You can find out how to change the line on the trimmer from below.