How to put on a shoulder strap for a lawn mower

Grass trimmer belt from China. product characteristics and design, price, video

Working with a trimmer is much more convenient and easier with a special belt. Thanks to him, the operator can mow large areas of grass for hours on end without pain in the joints and muscles. The two-shoulder belt is designed so that the lawnmower is held by the fasteners by itself. without the help of your hands. She only needs to point and let you do the rest. This brochure is about how to correctly attach a harness to your trimmer and how to set it up to lighten the load.

Many trimmer models come with a conventional slash belt. For work, however, it is best to buy a backpack strap, which is specially designed for brushcutters. Thanks to its clever design, it distributes the weight of the device evenly over the entire body. Padded shoulder straps take the weight off and relieve soreness in the forearms. Stiff backrest diffuses the load between the upper and lower back, eliminating the lower back. Shock-resistant thigh guard prevents the trimmer from coming into contact with your foot so it doesn’t rub or transmit vibration. Plus, the shoulder strap provides:

• convenient transportation of the grass trimmer;
• comfort in operation due to the ergonomic position of the grasshopper in relation to the body;
• The backpack belt prevents the brushcutter from slipping out of your hands when hard objects get under the knife.

Easy replacement of the drive belt on Cummins ISF 2.8

The way I describe is comparable to cheating for some people! But it works for me, why will not work for others?!I was prompted to describe my method because I looked at the Комментарии и мнения владельцев on the forums of gazelle who and how to change the belt and the most shocking was a video on YouTube, where an especially advanced “mechanic-tractorist” apparently put the belt with a pipe that I did not pull the wheels on the Kamaz!The method is very simple! You only need a screwdriver and a ratchet with a “24” socket!The algorithm I will lay out in pictures, I hope it will be understandable! Unfortunately, I have not found anyone nearby, who would hold a camera to shoot video, but I cheat there is no point, so the photo, I think it will be enough!Use a ratchet to twist the drive belt through the alternator pulley! Take it out of gear in this case is only welcome!)

Lift the belt on the pump pulley from the engine and turn the alternator pulley clockwise with a ratchet:

After the belt is slightly off, continue to rotate the alternator pulley gradually:

It’s just a matter of prying up and removing the belt!

For pure experiment we change the old belt, as there are a lot of words about that the new belt, after the old one is not put on:

Actually the new belt, still 2155 mm long, the new ones are 2165!

We slide the belt through all the pulleys, put all the brooks on the pulleys! We only leave the pump pulley not worn. The tensioner is not to be touched at all, it has a small stroke that doesn’t allow you to put the belt on freely.

Take the screwdriver and tighten the belt on the pulley with it! And gradually turn clockwise with ratchet! It’s important that the bottom edge of the belt goes over the protruding center of the pump pulley:

The main thing is to hold the screwdriver and do not release it until the belt wraps around the pulley!

You can also keep the radiator on and normally remove and put the belt on. The only thing is, if it is a belt replacement, it is harder to run it through the impeller and that’s it.Good luck to all in simple and not so simple situations!

Mowing tall grass

Special attention is needed here. Tall grass needs more care than simple grass. The thing is that there is a winding effect of the vegetation on the spool. In this case, the grass stays on it and does not let the machine rotate at full power. This noticeably slows down the process and reduces the number of revolutions.

To prevent this from happening, go through the path in several stages. Gradually cut a certain amount of height, passing lower and lower on the stem.

As a rule, tall greens have much thicker and stronger stem bases, so in addition to winding you can damage the cutting element with hard stems.

It is also necessary to take into account that if your technique works recently, mowing high grass can be even more difficult. Therefore, do not work long so as not to give the engine a particularly heavy load. 15-20 minutes with a 15 minute break will be enough. Since it is better to cut the grass in several stages, don’t forget the grass box. It will start to clog very quickly, this will lead to problems with the tool. Clean completely, so that it doesn’t take too long before the next cleaning.

Under the hay

Use a disc as a cutting element, because meadow vegetation is tougher than normal vegetation. It’s better than a fishing line, especially for hay, because it cuts through dry grass better. This way, the grass will not get stuck on the fishing line, which can cause poor engine performance. The hay should not be cut small, it should be quite high, so try to cut it under the root.

How to start and adjust the engine of a gasoline grass trimmer?

Consider starting the engine of a lawnmower (gasoline trimmer) on the example of Dolmar MS3340

To start a cold motor is necessary:

Turn the ignition switch on the handle

2.Move the choke shutter in the rear section of the air filter housing to the closed position

Pump up the fuel by pressing the silicone button on the bottom of the carburetor 5-8 times

Pull the starter cord slightly (about ten centimeters) until it begins to resist

After that make 1-4 strokes until the engine starts

6.After about 10 seconds of starting the engine, return the choke to its original position

Warning! Do not put your knee against the air cleaner housing when starting the engine.

There are two adjustment screws on the carburetor housing. They are set in the trimmer in the optimal position for the engine. The first screw (pictured below) is for adjusting the fuel flow. Do not touch it by yourself.

The second screw (photo below) is for adjusting the idle speed. You can experiment with it in case of urgent need

PS Photos of how to put on the double shoulder strap for Dolmar and Kawashima lawnmowers

Gasoline grass trimmer EUROTEC RX27

Engine capacity: 51,7 cm3 Power: 2,7 kW Fuel tank capacity: 1 l Fuel type: AI 92/95 Speed of rotation: up to 9000 rpm Boom length: 155 cm Weight: 7,5 kg Professional balancing: yes

Lawnmower backpack belt with plastic protection

This belt is for lawnmower. Thanks to the backpack construction it distributes the weight very well over the whole body. Plastic protection avoids inconvenience when working with the tool. Buy cheap backpack belt for brushcutter at our online store

This belt is for the lawnmower. Thanks to its backpack design, it distributes the weight very well over the entire body. The plastic guard avoids any inconvenience when working with the tool. Buy cheap backpack belt for brushcutter you can always in the online store spetsinstrument.

Shipping costs are paid by the buyer. Delivery is by Nova Post. Payment for goods. cash on delivery or bank transfer. Saving money on delivery. you can make an advance payment for the goods by bank transfer. The return of the goods is possible within 14 days from the moment of purchase under the condition that the product is unused, unopened, in good condition, and with the packaging intact. For companies and organizations we give invoices, invoices, tax invoices, VAT certificates. You can buy products with VAT in the store Spetsinstrument by submitting registration documents of your company.

Backpack mower belt with plastic protection

38 (050) 336 88 83 38 (067) 326 45 96 38 (073) 169 79 55

Enter new password

Approximate time of appearance of the product from 3 to 7 days

Enter your email address in.Please check your email or phone number and we’ll let you know when the product is in stock:

Adjust the height of the grass trimmer’s backpack strap hook by tightening the shoulder straps so that the grass trimmer blade lowered to the ground is parallel to the ground (strictly horizontal). When working with the grass trimmer saw blade, adjust the height of the hook (by tightening the shoulder straps) so that the grass trimmer saw blade is tilted slightly forward relative to the ground surface.

By moving the grass trimmer’s suspension ear to the grass trimmer strap forward or backward, balance the grass trimmer so that when you release the handlebar, the grass trimmer blade is near the very surface of the property, but not resting on the grass. For sawing bushes and young trees with a shrub trimmer blade, the grass trimmer must be balanced so that when you release the handlebar, the machine hangs on the hook horizontally on the ground.

Adjust the shoulder straps of the grass trimmer (harness straps) so the weight is evenly distributed on your shoulders (check with your hand on the grass trimmer suspension hook).

Husqvarna Grass Trimmer Backpack Belt Video. About the design features of the belt harness (harness) that make mowing with Husqvarna brushcutter, trimmer, petrol and brushcutters easier and safer. wide shoulder straps and elastic waist belt, quick-release locks (carabiners) in case of fire or any other situation requiring quick release from the grass trimmer. On the versatility of belts for men and women.

These Husqvarna grass trimmer shoulder straps (Balance 35/55, Balance X, Balance XT) can be used on all trimmers, brushcutters, power tillers, brushcutters, and shrub trimmers.

A lawn mower is a handy tool for mowing lawns or tall grass, if properly balanced. It is not about balancing the line or blades. You have to balance the working handle as well as the position of the petrol grasshopper on the belt. Many gardeners don’t use a belt for petrol mowers, which makes their arms and backs get tired. To work comfortably, it is necessary to use a carrying strap. Such belts are delivered with professional petrol lawnmowers. Support belt is an optional extra for Chinese gasoline-driven mowers.

Backpack mower belt with plastic protection

The belt of this model is used for the lawnmower. Thanks to the backpack design it distributes the weight very well over the entire body. Plastic protection avoids inconvenience when working with the tool. You can always buy cheap backpack belt for a brushcutter at the online store

This belt is for the lawnmower. Thanks to the backpack design, it distributes the load very well over the entire body. Plastic protection will avoid any inconvenience when working with the tool. You can always buy cheap backpack belt for brushcutter at the online store spetsinstrument.

Delivery expenses are paid by the customer. Delivery is by Nova Post. Payment. cash on delivery or bank transfer. You can save money on delivery by prepaying for the products by bank transfer. Return of the goods are available within 14 days of purchase, provided. if not used, not opened, preserved appearance, preserved packaging. For companies and organizations we provide invoice, invoice bill, tax bill, VAT certificate. Buy a product with VAT in Spetsinstrument store by providing the registration documents of your company.

Backpack mower belt with plastic protection

38 (050) 336 88 83 38 (067) 326 45 96 38 (073) 169 79 55

Enter new password

Approximate time of availability 3 to 7 days

Enter your email address at the bottom of the page.Please send us an email or phone number and we’ll let you know when the product becomes available:

Adjust the height of the grass trimmer backpack belt hook by tightening the shoulder straps so that the grass trimmer blade lowered to the ground is parallel to the plot surface (strictly horizontal). When working with the grass trimmer’s saw blade, adjust the height of the hook (by tightening the shoulder straps) so that the grass trimmer’s saw blade is tilted slightly forward relative to the ground.

By moving the grass trimmer’s hanging eye on the grass trimmer belt forward or backward, balance the grass trimmer so that when you release the handlebar, the grass trimmer blade is near the very surface of the area, but does not rest on the grass. For sawing bushes and young trees with the brushcutter saw blade, the grass trimmer should be balanced so that when the handlebar is released, the machine hangs on the hook horizontally to the ground.

Adjust the shoulder straps of the grass trimmer (harness straps) so that the load is distributed evenly over your shoulders (check by pressing on the grass trimmer suspension hook with your hand).

Husqvarna Grass Trimmer Belt Video. About the design features of Husqvarna backpack harness (harness) that make mowing easier and safer with Husqvarna brushcutter, trimmer, gasoline saw, brush cutter. wide shoulder straps and elastic waist belt, quick-release locks (carabiners) in case of fire or any other situation requiring quick release from grass trimmer. Versatility of shoulder straps for men and women.

These Husqvarna grass trimmer shoulder straps (Balance 35/55, Balance X, Balance XT) can be used on any trimmer, brushcutter, power brushcutter or brush cutter.

A lawn mower is a handy tool for mowing lawns or tall grass if you balance it properly. It’s not about balancing the cutting line or blades. You need to balance the working handle as well as the position of the gasoline grasshopper on the belt. Many gardeners don’t use a belt for a petrol lawnmower, which makes their arms and back get tired. For comfortable operation it is necessary to use a supporting belt. Straps like these come with professional petrol lawnmowers. For Chinese petrol lawnmowers the support belt has to be bought additionally.

The position of the lawnmower in relation to the belt

The lawnmower must be correctly fastened to the belt. So that the garden tool doesn’t lift up when you’re working and it’s convenient to cut the grass, the belt is attached to the back of the handle. If you fasten the belt too close to a full fuel tank, the petrol grasshopper will go deeper into the ground and the cutting elements will hit the ground. No cutting element is designed to come in contact with the ground. Incorrect positioning of the mower blunts the cutting elements quickly. To extend the life of the cutting elements, gardeners raise the lawnmower. This kind of work sends shivers down your spine.

A petrol lawnmower should hang loosely from the belt. For proper balance, attach the belt so that the filled fuel tank and the mower‘s cutting unit are in balance. It is also important to find such a position of the gasoline grass trimmer, when working in which, you will not cover the exhaust port of the engine, otherwise the engine will overheat during long-term work.

How to mow grass with a trimmer?

The main thing is to adjust the grass trimmer belt correctly, so the brush drum doesn’t wander on the ground.

How to make a proper gasoline-oil mixture.

Do not use a line that is too thick for the trimmer. it takes up too much speed and overloads the grass trimmer.

Do not wind too much fishing line on the reel, and do not wind it too tightly.

Every now and then stop and clean the basket

Lubricate the cable of the grass trimmer and the gear train (if it has one) with solidol.

I mow with the trimmer from the company Varyag according to the instructions:

Action 1. Installing the cutting mechanism.

Depending on the type of weeds we choose the cutting tool: for soft grass. trimmer line, for hard grass and small bushes. knife. We unscrew the nut fixing the cutting mechanism and install the cutting tool. How to put a collar on how to put a belt trimmer for grass how to play correctly. Tighten the nut. the mechanism is ready to work.

Note: some grass trimmers do not have interchangeable cutting tools, so you can start working with them immediately.

Action 2. Preparing the grass trimmer for work.

If the grass trimmer is electric. charge the battery or plug in the motor. If it’s petrol. fill the tank with fuel. Then, depending on the type of grass trimmer. adjust it on itself (top-mounted trimmer is hinged using the shoulder loop, backpack trimmer is hinged by the shoulders, bottom-mounted trimmer is hinged by the handles). Hold the grass trimmer over the grass so that its cutting mechanism is parallel to the area to be mowed. Starting the engine.

Mow the grass with the grass trimmer in simple movements. It is important to remember that the cutting mechanism of the device rotates counterclockwise, so that the cut grass will fall on the already treated area. First. from right to left in front of us (so we cut the top of the grass). Backpack strap for how to properly put the form how to properly put the line for the trimmer on the grass trimmer. The second one is from left to right (this is how we remove the residual grass).

It is better to divide a large working area into squares, and mow the grass on them, moving from one to another on the outside of each square.

When mowing grass on slopes it is recommended to mow from the bottom, moving parallel to the sloping ground. When you’ve reached the edge, go back a bit higher and repeat the same route until the whole area is mowed.

To cut the grass on a plot with trees, it is better to use a line cutter, and mowing should be done by going around the perimeter of the plot, around the trunk of the tree.

When you have finished mowing all the grass on your garden plot turn the engine off, remove the grass trimmer (for shoulder and knapsack devices), clean the cutting mechanism from grass residue.

The right belt for a grass trimmer

There are grass trimmers that do not require additional devices. for example, lightweight battery-operated electric trimmers. Even a child can carry them, and they hold firmly in the hand without tearing out. But in most cases grass trimmers weigh from 6 to 9 kg, and you need a belt to not get tired of carrying them from place to place.

What else is a trimmer belt for?

1) For transporting your grass trimmer. Transporting a grass trimmer to the cottage when you don’t have a car is tricky. If the equipment doesn’t have a belt, you should at least sew a pouch with a shoulder strap. How to properly put on a grass trimmer belt video. How to put on a grass trimmer belt correctly. How to put it on properly. How to do it right. This will lighten the load when transporting the grass trimmer.

2) For comfortable mowing. After all, if your hands get tired, and mow weeds and overgrown lawns will not want. And if you do want to, trembling with sluggishness is a dangerous option.

3) For an ergonomic position of the grass trimmer relative to your body. Properly fastened and adjusted to the length of the belt protects against lumbar injuries and strain on the back muscles.

4) For safety. The grass trimmer will be much safer if it is less likely to slip out of your hands if branches and tough vegetation get caught in the cutting head. When this happens, the grass trimmer, whether it’s a gasoline or electric mower, makes a sharp jerk and the grass trimmer is literally “ripped” out of your hands.

For these reasons, many garden trimmer models are equipped with belts. They are threaded through the shaft of the grass trimmer and fastened over the shoulder of the operator. The belt helps balance the total weight of the grass trimmer and the operator, and you don’t have to compensate for the balance by extending your arms or putting one leg back.

How to put on a brushcutter correctly

REDVERG 5014460 shoulder strap to hang the grass trimmer. With hip protection. I bought Champion grass trimmer.

Little video about mowing with a gasoline trimmer / strimmer by the example of the student: how to put the belt, how to balance the shaft of the trimmer.

1) Find the place where the belt clips to the grass trimmer shaft. How to put on a grass trimmer belt correctly. How to Properly. On many models designed for amateur gardeners, the hook, screw, or slot is located next to the handle or ignition switch.

2) Release the belt carabiner and hook it into the lug on the grass trimmer handle. Find a second strap hole and do the same thing.

3) Place the grass trimmer with the strap on your back so that the top of the strap goes over your left shoulder (over your right shoulder for left-handers).

4) Adjust the strap length so that the lever for cutting power and continuous mowing is at a comfortable height with your arm slightly bent at the elbow. In terms of width, make sure that there is at least 10-15 cm from your body to the grass trimmer.

5) Put your right hand on the lever and your left hand on the top panel. Wiggle the head of the grass trimmer, feel where the grass trimmer’s center of gravity is located. If your weight is still unbalanced and you have to bend over, or you have to use a lot of force to hold the device, try pulling the belt higher or lowering it by 1-2 cm. Once you’ve got the belt sorted out finally, you’ll get a feel for which trimmer position is most comfortable

6) Stop cutting the grass if you feel pain in your lower back and arms. Re-adjust the belt.

What should be a belt for a trimmer grass?

It’s no secret that grass trimmer belts often represent only a sling with two carabiners, not adapted in any way for the convenience and comfort of the operator. Review on lawn mower shoulder strap I bought for Champion grass trimmer how to put on correctly. Therefore, the belt can be bought in specialized stores of garden equipment, purchased online, or simply ordered at the nearest studio, which works with leather products.

The best for the grass trimmer is a leather belt: it does not slip and fixes the equipment quite firmly, as well as leather is pleasant to the touch.

In the shoulder area, you can make a special quilted overlay, which will make the load on the shoulder less noticeable and reduce friction.

Remember that a proper fitting grass trimmer belt will significantly increase your comfort and speed with this garden equipment. That means that your health, your mood and your lawn will be in perfect order.

Electronic grass trimmer with bottom mounted motor (STIGA)

Try to avoid mowing with this type of trimmer in wet weather, after the rain or when dew is falling. The reason is that the electric motor cools down through openings in the plastic housing and moisture can get in.

Do not work with such a trimmer more than 10 minutes. it can cause overheating of the motor. Take breaks in your work.

There are grass trimmers not only with the bottom, but also with the top position of the motor. Electronic grass trimmers with the top of the motor are equipped with more massive motors, some models may use as a cutting tool for an iron cutter (knife) or plastic blades.

How to put on a brushcutter correctly

REDVERG 5014460 shoulder strap for hanging grass trimmer. With thigh protection. Bought for the Champion grass trimmer

Here’s a short video on how to mow with a petrol trimmer / chainsaw using the example of a student: how to put on the belt, how to balance the.

Top-mounted electric grass trimmer (STIGA)

With such a grass trimmer you can successfully fight weeds and mow everything, up to and including quilts, burdocks and bushes. The line outlet here is semi-automatic or manual, with a line diameter of 1.6 to 2.4 mm.

The undoubted advantage of this category of trimmers is that now you can safely mow wet grass as well, without fear of getting wet on the electric motor. But you should never mow when it’s raining!

Cordless grass trimmers also low noise, they are easy to start and stop, with them you can freely move around the lawn, the disadvantages. low cutting power, higher weight (up to 4.5 kg) and short operating time without recharging. from 15 to 30 minutes. That is why they are not yet widely used.

Gasoline grass trimmers are widely used due to their autonomy, great power and performance. It is these devices most often used by professionals in their work.

When using a gasoline trimmer (chain saw) you don’t need to worry about the availability of power outlets and the quality of mains voltage, fear of accidentally cutting an extension cord or bruising landings with it.

According to the layout, lawnmowers (however, this is also partly true for electric trimmers) differ from each other:

• power and type of engine (two-stroke or four-stroke);
• The shape of the boom (straight or angular, solid or split)
• The shape of the operating handles (D, J or T-shaped);
• by the cutting tool (trimmer head, disc blade).

Grass trimmers with a four-stroke engine benefit from the fact that gasoline and oil are poured into the engine, as in a car. separately. No pre-treatment of the two-stroke fuel mixture of gasoline and oil is required.

Electronic grass trimmer with bottom-mounted motor (STIGA)

Try to avoid mowing with this type of trimmer in wet weather, after the rain or when dew falls. The reason is that the cool-down of the electric motor occurs through slots in the plastic housing, through which the inside can get wet.

Do not use this trimmer for more than 10 minutes. it can cause overheating of the engine. Take breaks in your work.

There are trimmers for grass not only with the bottom, but also with the top location of the motor. Electronic grass trimmers with top-mounted motor are equipped with more massive motors, some models may use as a cutting tool an iron cutter (knife) or plastic blades.

How to put on a brushcutter correctly

REDVERG 5014460 shoulder strap for hanging grass trimmer. With hip protection. Bought for Champion grass trimmer

Here is a short video on how to mow with a petrol trimmer / chain saw by example: how to put on the belt, how to balance the blade.

Top mounted electric grass trimmer (STIGA)

With this grass trimmer you can successfully fight weeds and mow everything, up to quilts, burdocks and bushes. The line release here is semi-automatic or manual, with a line diameter of 1.6 to 2.4 mm.

The undoubted advantage of this category of trimmers is that now you can safely mow and wet grass, without fear of moisture on the electric motor. But in no case can you mow during the rain!

Cordless grass trimmers also make little noise, they are easy to start and stop, you can move freely on the lawn with them, the disadvantages are low cutting power, heavier weight (up to 4.5 kg) and short work time without recharging. from 15 to 30 minutes. That is why they are not yet widely used.

Gasoline grass trimmers are widely used because of their autonomy, great power and performance. These are the devices most often used by professionals in their work.

When using a gasoline trimmer (chain saw) does not need to worry about the presence of the mains socket and the quality of mains voltage, fear accidentally cut the cable-extender or squash them plantings.

According to the layout, lawnmowers (however, this is partly true for electric trimmers) differ from each other:

• power and type of engine (two-stroke or four-stroke);
• the form of the boom (straight or angle, one-piece or split);
• The shape of the tiller (D, J or T handle);
• cutting tools (trimmer head, circular knife).

Lawn mowers with four-stroke engines have the advantage that gasoline and oil fill up the engine like in a car. separately. It does not require the prior preparation of a two-stroke fuel mixture of gasoline and oil.

Engine

Electric trimmers (electric mowers) power is measured in watts, and the maximum power of the engine reaches 1200 watts. Compared with gasoline mowers, they are somewhat weaker, but they also have their advantages.

• Weight, t.к. Electric grass trimmers are much lighter.
• Easy to use. you don’t have to think about buying gasoline and oil, or how to mix them.
• Electric grass trimmers are much quieter, because.е. The noise emitted by the electric motor is much lower than that of the gasoline engine.

And now about the disadvantages

Bottom-mounted grass trimmers have very little power. No more than 650W. And also it is never completed with a knife (!).

There are considerably more trimmers with a top-mounted engine. They are considerably more powerful. up to 1200 watts

often a line for a trimmer is used as a cutting head on an electric trimmer for grass, but there are models on which a cutting disk, or in another way. a cutting knife, can be put. As a rule, these are powerful (from 1000 W) models. Power trimmer for grass with the top of the engine allows you to install a thicker line for trimmer, which allows you to mow thick, tall grass. An example of this is: STURM!, Energomash, Champion

Locking against overheating

Very seldom used on electric trimmers. The essence of its work is as follows: if the engine overheats, a special thermal switch will not let the engine burn out and will shut down the lawnmower. Of course, unlike with gasoline mowers, you have to take care of the electric mower, t.е. after 15-20 minutes of work turn it off and let it cool down for about 15 minutes. The overheat protection is available on EFCO 8060 and 8100 mowers.

Electric grass trimmer: how to make the right choice?

the grass trimmer is the only correct solution for cutting grass in places that are difficult for a wheeled lawnmower to reach, such as around bushes, trees, along paths, fences and walls.

Diagram of the device of an electric trimmer for grass.

Grass trimmers come in 2 types: gasoline and electric. In this article we will try to describe the main points you need to know when choosing an electric grass trimmer.

grass trimmers with an electric motor are almost silent, start with a simple push of a button, and do not pollute the environment. However, they are more difficult to cut thick weed stems and even dense grass. In addition, its motor needs a power supply, which is most often brought by a long mains cable, restricting the freedom of action of the mower and threatening to get under the knife. Trimmers with a built-in battery do not need constant communication with the outside world, but they can cut the grass for a day maximum of 20-30 minutes. All the rest of the time will be spent recharging their low-power, heavy and very capricious in operation and storage batteries.

Handle type of electric trimmers

Electric grass trimmer handle design.

When choosing a grass trimmer brush cutter, keep in mind that they come with:

The D-handle is handy when the workload is small but requires a lot of maneuverability (e.g., for working on shrubs, trees, paths, and hedges). The best trimmer handle for this type of trimmer is. If you have to tame lush brushwood that has long since fallen off your hands, look no further than models with a D-handle, an extra J-handle and a blade option. The J-shaped handle prevents the operator from getting too close to the bevel gear. The J-handle should be attached when the grass trimmer is equipped with a grass knife. To make work easier, you’ll need a shoulder strap.

T-shaped handle is convenient for working in an open space, and the movement you make will be similar to that of a scythe. These grass trimmers are designed for large amounts of work in large open spaces. powerful grass trimmers can be equipped with a three-blade blade that can handle branches up to 15 mm in diameter. When working with such a trimmer, it is important that it is equipped with a harness for a tight fit to the body. Remember: the more powerful your trimmer is, the more work it can do.