How To Put The Line On The Trimmer Spool

Petrol trimmer

Small mobile devices for cutting grass and young branches, consisting of a bar, motor, cutting part and handle are called a trimmer.

How To Put The Line On The Trimmer Spool

The device without a trimmer is simple, it is easy to disassemble, if necessary

There are electric and gasoline modifications. The former do not fill with fuel, but they depend on the length of the cord. The second work regardless of the availability of electricity, anywhere in the garden or vegetable garden.

Petrol trimmers are lighter and less expensive than lawn mowers. They cope with grass and shrubs, so such mowers are used in everyday life and on an industrial scale. For convenience, the technique provides straps that are worn on the shoulder. Thus, the stress on the arms and back is reduced.

Fuel filling method

In cheap, low-power samples, fuel is poured into the tank at the same time. This creates inconvenience for users, since oil and gasoline must be mixed before operation. In expensive mowers, 2 separate tanks for gasoline and oil are installed. Refueling occurs as you use it and is not interdependent.

How to wind the line on the trimmer spool. Detailed instructions

Petrol trimmerVariety of petrol trimmersModel power Engine type Cutting elementHandle shapeFueling methodNoise levelHow to fill the line in the trimmerCord selectionWhat.

  • Petrol trimmer
  • Varieties of benzotrimmers
  • Model power
  • Engine’s type
  • Cutting element
  • Handle shape
  • Fuel filling method
  • Noise level
  • How to tuck the line into the trimmer
  • Picking a cord
  • What are the coils
  • Algorithm of actions
  • First option for double bobbin
  • Second winding option
  • Tool feeding methods
  • Substitution rules

Is the trimmer thread used up and needs to be rewound? Don’t be in a rush to panic. There are several ways to wind the line around the trimmer spool. The choice of method depends on the bobbin design and tool model. We understand the details of the process.

The trimmer can be equipped with several attachments to work with different types of vegetation

Cutting element

Cutting the grass is done with a knife or fishing line. The first option is more efficient. The knife copes with dense thickets of grass, branches, does not need to be wound. The disadvantage of knives is a high level of danger, the need to periodically sharpen the tool. True, all models have protective blocks, but they are installed from the operator’s side.

READ  What Gasoline To Fill The Trimmer

The line is safe, light, and does not need to be sharpened. The disadvantage of this type of cutting element is that it is not designed for thick branches. For young grass, use a line with a thickness of 2 mm, for tougher vegetation. A line with a diameter of 3 mm.

The saw blade is used for cutting the toughest branches.

Cutting disc handles grass and small branches easily

There is a universal option with changing the cutting element. In such trimmers, the line and the knife change, based on the task. The disadvantage of such devices is a high price.

Tool feeding methods

In benzotrimmers there are 3 ways of feeding the line:

  • Manual;
  • Semi-automatic;
  • Auto.

This is what 3 types of trimmers look like

In the first case, the thread is pulled at the ends after stopping the tool.

In the second, wire feed starts after unlocking. To do this, you need to lightly hit the head on the ground.

In an automatic device, the mechanism is triggered independently after starting the engine. This option is convenient for performing a large amount of work. Disadvantage of the machine. It requires a long length of thread.

Varieties of benzotrimmers

Trimmers are distinguished by indicators:

  • Power;
  • Engine’s type;
  • Cutting element;
  • Handle configuration;
  • Fuel filling method;
  • Noise level.

Depending on the power, tools are of household, industrial, mixed, universal type. Lawn mowers are a separate type. They are the most powerful of all types of gasoline trimmers.

How to put line on the huter trimmer spool

We just unscrew the lamb. When disassembling such a coil, you also need to make sure that the spring inside is not lost. Refueling with mowing line. In this I show you how easy and simple it is to wind the line around the reel of your hand lawnmower yourself. If your coil is designed to work with just one tendril, then that’s it. On the inside of the reel, they usually indicate with an arrow in which direction to wind the line. Having reeled the fishing line, we leave a small piece of it unwound in order to expose it outside. We fix this piece in a special groove located on the inner part of the reel and designed so that the line does not unwind at the time of collecting the reel. Next, we take the outer part of the coil and thread the outer piece of fishing line into the existing hole, assemble and put the coil back on the trimmer. If the coil is designed to work with two antennae, then do the following. On the inside of the reel, we look at how many grooves there are for winding the fishing line.

READ  Stihl 38 Trimmer Carb Malfunction

There may be one or two of them. If there is only one groove, then both tendrils are wound along this one groove. A reel with one groove must have a through hole through which the line is threaded. We rewind 2-4 m of fishing line, thread it through this hole so that it sticks out equally on each side of the fishing line. Threads of this type are often used in gasoline-powered tools with an engine more powerful than one and a half horsepower. Metal-cored threads come in both round sections and sharp edges. Regardless of the type of section, such threads are the best suited for overcoming difficult-to-cut plants. Threads of this type can easily mow not only dry grass, but even small bushes. The wires with a wire inside compare favorably with other types of consumables for their incredible wear resistance.

Unfortunately, this feature has a more than noticeable impact on the price of this type. In addition, you should pay special attention to the thickness of the consumable. For mowing young grass, a thread with a diameter of one and a half millimeters is suitable. The larger the diameter of the thread, the more dry and coarse weeds it is able to overcome. It is important not only to assess the capabilities of the material, but also to take into account the features of the trimmer. Using an unsuitable thread can damage the instrument. Using a thread that is too thick will overload the device motor. And the use of a thread that is too thin will significantly increase the wear of the twisting mechanism. That is why it is necessary to approach the choice of consumables no less responsibly than to refuel it in the trimmer. When a suitable fishing line is found and purchased, you can start considering ways to wind it on a reel.

At first glance, threading a line into the reel of a tool is not easy. But it is enough to carefully study this process. And in the future all the necessary actions will be performed without any difficulties. Measured and accurate dismantling of the spool from the spit coil makes it possible to go directly to winding the line. The design features of the head, the number and location of fixing holes dictate the sequence of actions when performing this operation, and also determine the methods used. Today there are several types of reels, depending on the number of line tendrils and the methods of threading it: Reel for lawn mowers with one tendril. Many owners and experts note the ease of use and ease of refueling the bobbin with one mustache. Depending on the manufacturer, the length of the threaded line can vary from 2 to 5 meters.

READ  Why The Hot Trimmer Does Not Start Well

Double fluted head. There is no fundamental difference between bobbins with one and two grooves, but if carelessly threading into the twin groove, there will be operational problems. Due to the likelihood of interlacing adjacent lines of the tool, a situation may arise when, after wear of the working antennae, it is impossible to remove new ones. Regardless of the number of strands, a line with a length of 1 or more is taken for threading. Winding must be done in the opposite direction to the rotation of the head, since winding in the direction of travel will lead to the fact that the line will not be removed from the reel. After the line is tucked into the trimmer coil, thread the free ends of 15-30 cm into special holes. Most likely, the range will be indicated there. The thickness varies from 1.2 to 4 mm. Choose the appropriate option, taking into account the characteristics of the cultivated area. The larger the diameter, the easier it is to cut tough grass. Preparation. Remove and disassemble the spool In most models of electric and petrol trimmers, you will need to remove the spool to replace the fishing line.

For the instruction to be universal, we will still consider it in detail: 1. Fix the shaft. Insert the locking element into the corresponding hole. It can be a thin screwdriver or a metal rod. Take out the winding spool. The preparatory stage has been passed. You can proceed to winding the fishing line. How to wind the line on the spool of the trimmer First determine the length of the consumable for your spool.