How to refuel the coil of the Patriot electrimmer. Trimmer for grass electric Patriot RT380
Electric trimmer for the grass Patriot 1000 how to remove the coil
Trimmer for grass, whether it is gasoline or electric, is the only right solution for mowing grass in hard.to.reach places that a wheelbreak cannot cope with. As a cutting tool in trimmers, metal knives or a special fishing line for a trimmer are used, which is refueling in the coil of a trimmer for grass. But, unfortunately, trimmer heads during operation over time become unusable. Some malfunctions can be eliminated with your own hands, and with some you will need a complete replacement of the mowing head.
If your coil is designed to work with only one osmus, then everything is simple here. It is necessary to rewind 2-4 m of fishing line (depending on the size of the coil), find the hole for the trimmer on the inside of the coil, insert one end of the fishing line there and start to wind the fishing line for the trimmer in the direction in the reverse direction of rotation of the coil at the trimmer. The inside of the coil is usually indicated with an arrow in which the side is to wind a fishing line for a trimmer. Having wiped a fishing line for a trimmer, we leave its small piece unnecessary to put it out. We fix this piece in a special groove located on the inner part of the coil and designed so that at the time of collecting the coil of the fishing line for a trimmer does not unwind. If there is no such groove, then you will have to hold a fishing line for a trimmer with a finger, so as not to let it unwind during the further collection of the coil. Next, we take the outer part of the coil and spread the outer piece of fishing line into the available hole, collect and put the coil back to the trimmer for the grass.
If the coil is designed to work with two antennae, then we do the following. On the inside of the coil, we look at how many grooves are available for winding fishing. There may be one or two of them. If the groove is one, then both antennae are wound on this one groove. If there are two grooves, then each antennae is wound in a groove. The coil with one groove should have a through hole in which a fishing line for a trimmer is threaded. We open 2-4 m of fishing line, we extend it through this hole so that on each side of the fishing line it sticks the same. And we will simultaneously wrap both the antennae of the fishing line in one direction, the reverse direction of rotation of the coil in the trimmer and coinciding with the direction indicated by the arrow available on the inner part of the coil. We leave a little fishing fishing line, we fix the resulting ends in special grooves, and if they are not, we hold with your fingers. We spread both ends into the available holes on the outer body of the coil. Collect the coil and fasten it to the trimmer.
In the presence of two grooves, a piece of fishing line 2-4 m long is folded in half, we insert the loop in the groove between two grooves at the bending site, and we wind both the ends of the fishing line each in its groove at the same time. Further actions are similar to the previous option.
There are also coils, in which a fishing line for a trimmer is threaded through a through hole on the inside. After that, the ends of the fishing line, without wrapping, spread completely through the holes on the outer body of the coil, collect the coil and begin to rotate the button that is usually pressed in order to release the fishing line for the trimmer while it is worn out. Rotate the button. inside the trimmer fishing line is wound itself. At the same time, it will not work to twist it in the “wrong” direction, since it can spin only in one direction. If you get used to it, then you can wrap a fishing line for a trimmer to such a reel without even taking it out. you just need to combine the through hole of the internal drum with holes on the outer body of the coil, and then pass the fishing line for the trimmer in them.
That’s all on this issue. Successful winding!
How to remove a coil from a trimmer for grass and extract a fishing line for a trimmer
Initially, before filling the fishing line for the trimmer to the coil of the trimmer for the grass, it is necessary to extract it from there. Coil or tip is a device that is located inside the braid, bobbin or drum. The heads are of different types (depending on the manufacturers), however, the principle of replacing the fishing line on the coil has the same. First of all, we will figure out how to remove the head from the tool, as well as how to get a drum with a fishing line from it.
It is interesting!The replacement of equipment can be done directly on the tool, but if you do it for the first time, it is still recommended to remove the head, and study the detailed process of winding. After the technology is mastered, you can perform work on replacement on a trimmer of a motorcycle or a gas station.
Instructions on how to promote a hand head on a trimmer, has the following look:
- Turn the instrument with the head to the top, and if necessary, cleanse it from pollution. Take two fingers of one hand by the cover of the cover (on the mowing head), which are located symmetrically to each other. After a light pressed inward, dismantle the protective cover from the drum
- Next, from the rampart of the drum, the coil for the fishing line should be removed. It is planted on a shaft without fasteners, so it is dismantled with one hand
- The main part of the drum is fixed using a screw, which must be twisted with a screwdriver with an appropriate tip or a bat
- To twist it, it is necessary to hold the base of the drum with one hand, and the second to remove the screwdriver against the direction of the clockwise
- After that, you can proceed to dismantle. To do this, you do not need to pull it with all your strength, but slightly shaking it, slowly remove it from the hook with a metal shaft on which the drum is planted
- When installing the installation, the head should be planted in a tetrahedral slot
This process is not difficult, and as you know, it is not necessary to dismantle the entire head if you know how replacement is performed. When dismantling, consider the following nuances:
- It is recommended to remove the head periodically to prevent the corrosion of the threaded connection. If you never unscrew the screw, then if necessary to do it will be difficult and even sometimes impossible
- If the screw has a tetrahedral boring of the head, then for twisting you should select a screwdriver or bit of a suitable size to eliminate the licking of the faces on the head
- When assembling the installation, a threaded seat should be treated with lubricants, for example, solidol or machine oil
- If the edges on the screw are licked, then for its unscruptions you can use special clamping forceps
- There are drums that do not require preliminary disassembly. To dismantle them, you should take up it, and rotate in the opposite direction of the direction of the clockwise
How to open a self.supporting coil (spool) motorcycles.
Knowing how to disassemble the drum, you should continue to clarify the process of replacing a trimmer fishing line for grass. Below the video shows a detailed process how to open a trimmer coil for grass and disassemble it.
How to remove and disassemble a coil
Before proceeding to the process of replacing the cord, users of trimmers need to remove and disassemble the coil. Consider how to do it.
The mowing head of a trimmer for grass consists of several parts: a casing, springs (not in all models), bobbins with a cord and cover.
In trimmers, 2 options for fastening the mowing head are most often used.
To remove the head of the trimmer for the grass, it will require its complete disassembly.
- To remove the lid covering the inside of the head, it is necessary to press on the latch (latches) located on its two sides.
- Removing the lid, you will see the spool that must be removed from the body. In some coils, a spring is installed under the bobbin, which must be carefully pulled out so as not to lose it in the grass.
- Removing the bobbin, in the center of the case you will see a screw with a slot under a cross.shaped or flat screwdriver. It is possible that there may be a bolt under the hexagon or nozzle “Asterisk”.
- Using a screwdriver, choosing the necessary bat (nozzle), you need to unscrew the bolt (counterclockwise).
After extracting the fasteners, take up the part of the part and, shaking it in different directions, remove the gearbox from the shaft.
In this version, the head is twisted onto the gear shaft. To remove it, you need to fix this shaft. To do this, in such trimmers, for example, in the Huter and Champion devices, a hole is provided through which you can insert either a thin screwdriver or a metal rod.
So, to remove the bobbin, take 2 simple steps.
- Insert the screwdriver into the hole and stall the shaft.
- Take the head of the head and start twist it clockwise. It should be twisted in this direction for the reason that the thread cut on the shaft is left.
Instructions with a step.by.step description how to wind the coil of a trimmer for grass and lawn mower
In order not to make a mistake with the choice of a suitable fishing line for your tool, you should first disassemble the head and look at the side wall of the coil. This information is usually presented on a tip, which will not allow us to make a mistake using the appropriate equipment.
If the information on the coil about what diameter the fishing line for the trimmer can be refueled, then this information can be clarified in the instructions. Having decided on the thickness or diameter of the equipment, it remains to figure out how to charge it. There are two ways for this, but not for all they are applicable. Consider both methods in details, and already depending on what models and trimmers you use, you are determined on your own which option is suitable.
It is interesting!The principle of how to wind a fishing line for a trimmer for a tip of motorcycles is appropriate not only for autonomous benzar groups, but also for electric trimmers.
Remove the coil from a trimmer for grass
On small electric trimmers with the lower engine location (when it is located at the ground) at the coil, usually there are two keys on the sides. Click on them and disconnect one half of the coil body from the second, which remains on the trimmer. Together with the first half, the inner part is also taken out, on which the flesh is directly wound. When analyzing, be careful: there is a spring inside that can fly out and get lost.
On electric and gasoline trimmers with a bent bar (on such trimmers there is no way to put a knife yet) you need to grab the coil body itself with one hand, and with the second hand you need to start turning counterclockwise the lamb available on it. It is he who attaches the coil to the bar trimmer for the grass. Having unscrewed the lambs, carefully remove the whole coil, trying not to lose the spring available inside.
On electric and gasoline trimmers with a straight bar and a gearbox at its end (on such trimmers for grass, in addition to the fishing line, you can also install a knife) look for a hole under the coil, insert, for example, a screwdriver, we quietly rotate the coil until the screwdriver crawls deeper deeper. and the coil will be fixed. Now we twist the whole coil clockwise (since the thread is left) and remove it from the trimmer for the grass. Then we disassemble the coil. It can be collected using latches or twisted with a lamb. If the coil is on the latches, then we press on the sides on the base of the latches so that they bent and free one half of the coil body from the other. We just twist the lamb. There may also be a third type of connection of two halves of such a coil: with it you need to grab the lower part with one hand, and the top is the upper one, and start turning them in opposite directions. Disasseminating such a coil, you must also follow so that the spring available inside is not lost.
What is a trimmer for grass?
The basis of this equipment is the following elements:
- engine, the main function of which is the rotation of the cutting head at the end of the bar;
- directly the head, consisting of a coil, on which either a fishing line for a trimmer or a knife can be wound;
- The knives rotating at high speed or a fishing line for a trimmer, which are the main cutting part of the device, about how to charge a fishing line for a trimmer to a trimmer for grass, will go a little further.
The electric device is inferior to gasoline in its power, so it is ideal for working on a standard plot of land, which adjoins the house with source of electric energy. The main positive aspects of such technology are the lack of noise during operation, light weight, ease of operation and, of course, environmental friendliness.
As for gasoline trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any site. Electricity here is not at all necessary to use, which positively affects the functionality of such an apparatus. cutting nozzles can be changed by working with a variety of weeds that are different in type.
One of the most common nozzles is a fishing line for a trimmer, so you should dwell in more detail on this element.
How to correct the fishing line for a trimmer in a trimmer, and what to do if the fishing line for a trimmer is quickly consumed, breaks off
Trimmer for grass is the most common unit used to cut grass and cut small shrubs. This device is distinguished by its simplicity in maintenance, simple management during operation, and even women cope with it even a small weight.
It is no secret that for the high.quality performance of herbal mowing work, the correct selection of a cutting tool is required. As the latter in trimmers, special cutting nozzles (wheels, knives) or trimmer heads with fishing line inside are used.
Nozzles and a fishing line for a trimmer are a consumable tool, but if the knives can be sharpened, then when spending the fishing line you need to replace it. In this article, we will tell you in the most detail how to correctly replace the fishing line for the trimmer.
Coil with one working antenna
The simplest version and simple sequence of actions:
- Bobbin dimensions and the length of the factory factory winding determine the recommended length for winding the braid fishing line. 2 5 m.
- One end of the spit line is inserted into the fastener technological hole inside the bobbin.
- The fishing line for the trimmer is wound on the drum during the reverse rotation of the bobin in the direction of the trimmer product for the grass. as a rule, on the inside of the bobin, the arrow indicates which side is wound.
- A small part of the spit line remains free so that it can be pulled out. it is fixed in a special groove on the inside of the coil designed to hold the winding when the coil is collected in working condition.
- The left end of the mowing fishing line passes through the hole of the outer part of the coil.
- Half of the coils are collected and installed on the bar of the trimmer device for grass.
Read how to wind a fishing line for trimmer trimmer for Carver’s grass
We carry out the winding of the fishing line
Sentlessly completed disassembly of a spray coil without losing its spare parts allows you to go to the main task-winding into a fishing line coil. Adjustment of a trimmer carburetor for STIHL grass. Technological features of the design of the spool and the number of working antennae determine the sequence of actions.
What can be used instead of fishing line
Many trimmers users are wondering: how can you change the cord, according to deflot, used in this kind of devices? They begin to conduct dangerous experiments, installing iron or copper wire, iron cables or strings in a mowing head, also mundane fishing fishing line for a trimmer.
If you install a cable of metal from metal, then a trimmer for grass is converted into a dangerous device not only for the user, and for others. This fact is clarified by the fact that during the operation of the unit the metal cable it will be evenly chopped, its ends are released, and small pieces of wire will fly in different directions at high speed.
Read trimmer for grass adjustment of fuel supply
And if you, by chance, hook your or someone’s leg, working as an unit with an iron cable (wire), then a strong and deepest section of the fabrics, and in some cases, amputation of the toes is provided for you. The manufacturer does not use nylon in vain for these purposes, since it is quite light and strong, and when separated, it does not fly away far and cannot cause injury.
Of course, it is possible to use the fishing fishing line for a trimmer in a trimmer in a trimmer, of course, but this will add excessive for you, as it wears out rapidly, breaks, mows slowly and does not work for cutting hard grass. In addition, during the work, a lot of time disappears to change the broken tool more than once.
In practice, the installation of an ordinary fishing line is justified if the user is going to mow grass near the fence, especially if it is from a rabid grid. In this case, in order to protect the standard, and from time to time an expensive cord from wear, it changes to a fishing fishing line for a trimmer, which is not a pity. Usually, in order to change the cord for a fishing line for a trimmer, it must be selected more thickly-2-3 mm.
The thread sticks together
This problem occurs in most cases due to the use of a bad cord. When the apparatus is operating, the head of the trimmer for grass is heated, and a bad fishing line for a trimmer melts in it, gluing between itself. Also, sintering of the threads occurs when a fishing line with a tough obstacle occurs. In this case, there is a sharp braking of the cord, after which it drags it into the head, where it bothers. Some owners of the units advise lubricating the cord with mineral oil or jumping on it with a silicone spray after winding on a spul. Others recommend wrapping less threads on the coil. But it is better to immediately take a high.quality product, in the manufacture of which the manufacturer took into account the factor of overheating of the head, and the thread will not stick together.
Magneto Design and a scheme of work
The transformation of rotation energy into a high.voltage discharge and the formation of a spark that ignites the fuel mixture. In the internal combustion engine, this detail is called Magneto, because in it alternating current is generated from the rotation of a constant magnetic rotor or anchor.
Magneto constructively consists of 2 windings: the highest and low voltage. The condenser with interrupter contacts are parallel to the latter. Whereas the conclusions of the winding of the highest voltage are connected to the candle and body. They are both wound on a core, between the poles of which a spinning magnet is installed, magnetized longitudinally.
https: // r-d1.info/2990-Kak-Snyat-Katushku-S-Trimmera-Shtil-2020-03-29.html https: // r-d1.info/2494-Kak-Snyat-Shpulyu-S-Trimmera-Patriot-2020-03-15.html https: // hitech-online.ru/Tehnika-Dlya-Sada/Trimmer/Remont-Katushki-Zazhiganiya.HTML
Trimmer device for electric grass. How to disassemble a trimmer for Bosch Art 23
LED lighting lighting device for lighting the aquarium inexpensive and harsh. Bosch Art 23 SL trimmer for grass when working. How to get a lawn mower. gasoline trimmer for grass.Starting a cool lawn mower. Trimmer for grass Electronic Skil 0735 AA. trimmer for grass Bosch Art 26 SL Full video
Trimmer for Forte EMK-360 grass, fishing line substitution. Malline for a summer residence from a gas balon on their own. How to wind a fishing line for a trimmer to a trimmer coil for grass. Trimmer for Bosch Art 26 Combitrim. Cheap trimmer for Bosch Art 23 SL grass. How to wind a fishing line for a trimmer to a trimmer coil for grass? Bosch Art 23 Easytrim Trimmer. Bosch Art 23 SL. How to assemble and start a trimmer for grass (motorcycle).four. Chickens for chickens.
This trimmer for the grass has no need to take a coil every time, it is very important to change the fishing line for a trimmer in an existing coil for a new ske. Bosch Art 23 EasyTrim Trimmer according to the annotation must have a fishing line for a trimmer with a width of 1.6 mm, but this unit is perfectly transferred and a fishing line for a trimmer with a width of 2.7 mm
And it happens that I wish to note that 2.4 mm fishing line will facilitate the mowing process
Bosch Art 23 EasyTrim Trimmer according to the annotation must have a fishing line for a trimmer with a width of 1.6 mm, but this unit is perfectly transferred and a fishing line for a trimmer with a width of 2.7 mm. And it happens that I wish to note that 2.4 mm fishing line will facilitate the mowing process.
Fix the reel support 16 so that it does not spin.
Turn the coil cover 14 counterclockwise and remove.
Draw the end of the latest fishing line in other words of the refitted coil through the hole
Install a coil with a lid 14 on the support
Now you need to take 5 meters of the latest fishing line and fold in half (to find the middle). In the middle part of the coil there is a recess (in some structures. a hole), for which you need to hook our fishing line for a trimmer. There is an arrow on the coil showing the direction of winding. Fundamental detail. if the coil has two.
Best Cordless String Trimmer EGO vs Toro TEST
Many owners of garden motos are perplexed by the question of substitution of fishing line in a trimmer head. In this case, it is transformed in the whole deed, capable of bringing into a non.working state not only a tool, at the same time mowing. To prevent a similar situation, we will analyze in a stages the process of replacing the cord (fishing line) in the nozzle.
Remove the nozzle from the gearbox. For this purpose, you need to cooperate the lateral hole or the upper curly washer and excavation on the axis, stick the screwdriver and fix the shaft from scrolling. Then you can unscrew the nozzle. It should be kept in your head that the thread on the shaft has a left clipping, respectively, you need to unscrew the element, turning it to the right.
The subsequent step will be disassembling the case of this node. Usually the lid is attached through the holes-cuts using fixers. To open it, you need to drown the latch into the body and squeeze the edges of the lid. If the nozzle has an automatic or automatic line for feeding fishing line, it means that there is a spring that is when.
I wish to intend the current theme of summer residents and gardeners of the entire post.Soviet place “How to refuel a fishing line for a trimmer to a trimmer for grass”. Few trimmers auto industry in their own operating instructions answer this question. Therefore, ordinary gardeners are hard to figure out how to do it correctly.
The structure of the inertial coils
Undoubtedly, in order to fix the coil, you need to represent its structure and the principle of operation. Without exception, all inertias gather in factory conditions from the same type of nodes, differing depending on the dimensions of the mechanism with their sizes. The main components are the following parts and details of the product below:
Coil for trimmerpatriotdl-1214. It is easy to season a fishing line for a trimmer!
Depending on the modification and purpose of the inertia, or as it is also called fishermen, it can be supplemented by a specific functionality inherent in a certain model.
How to disassemblekatushitrimerimer. Replacing the fishing line by the diet.
In this Vyda, I am how to disassemble a gasoline trimmer, as well as how to wrap it correctly.
Usually, the diameter that can mow young grass does not exceed 1.6 mm. I have on a similar trimmer how to remove a coil from a trimmer for grass, and the garden, meanwhile, overgrown. The thicker the thread, the more rough the grass it is able to overcome.
There are fishing lines with sharpened faces in the form of a sprocket or square, such an option is more adapted to mowing dry grass just due to the existing sharp faces, but it is more wear and tear and it is inferior in strength to the round cord.
How to remove and put a reel on a lawn mower!
To carry out this operation, it is aimed to turn off the network and turn over the work head upward. The upcoming course of action is depending on the design of the structure of the coil itself:
- In small trimmers with the lower location of the engine, click on the button located at the edges of the coil and remove its highest part from the head;
- On trimmers with a bent rod, clamp the coil of the coil with one hand, immediately turning counterclockwise located on the hooding of the lambs;
- In trimmers with a straight bar and a gearbox, insert the screwdriver into the hole located under the coil, and then turn the body of the coil counterclockwise.
How to replace, remove the spitter of the electric trimmerblackdecker GL716 electric trimmer
How to change, remove the mowing of the electric trimmerblackdecker GL716 DOCTION of the repair or substitution.
https: // cylinder.com.ua/blog/kak_namotat_lesku_na_katushku_trimmera https: // Instrument-tehnika.ru/kak-PRAVILNO-NAMOTY-SLE-NA-KATUSHKU-TRIMMERA/https: // kupihome.ru/Podklyuchenie/Remont-Katushki-Trimmera-Svoimi-Rukami-Kak-Snyat-Razobrat-Sobrat-I-Ustanovit.obratno.HTML
Field winding algorithm
Depending on which model of the trimmer for grass is used, the type, thickness and length of the fishing line is selected. The diafle of the cord can be from 1.2 to 4 mm. It is not difficult to think of that the thicker you will refuel the cord, the more hard and thick grass it is able to cut off.
In order to find out which line of fishing line can be used on your mower, there are 3 methods.
- Look at the information about the thickness of the cord in the annotation to the apparatus.
- Look at the backpack itself. It can be given information about the likely dialects of the fishing line.
- Put the fishing line for the trimmer to the output. If it passes into it without effort, then the cord of such a diameter can be used.
wound on a coil in a mowing head. Therefore, at first it must be opened (this was mentioned above). There are 2 methods of winding the cord.
The shape of the handle
Manufacturers offer 2 pens options:
The handle in view of the letters “T” is installed on models with auto.wrapping a fishing line. The work is carried out with 2 hands located on both sides of the bar. This situation is convenient for mowing large areas of vegetation. The cut is carried out according to the principle of braids for grass. from one side to the other. This option is not maneuverability, it works poorly on a complex relief. Bicycle steering can be equipped with control buttons. In household types of a trimmer for grass, the launch buttons are installed on the rod.
The classic model of a trimmer for grass with a bilateral handle on which the control buttons are installed
Gasinosinotrimmer with a D-shaped handle is more maneuverable, it is convenient for them to mow grass in areas with a complex relief. In such a tool, the hands are located one above the other. The lack of a handle is difficult to hold, control of such a device is more complicated.
The handle in the form of the English letter “j” is the most uncomfortable, so it is rare.
Semi.automatic coils and how effective they are
The most popular among mowers are trimmers for semi.automatic grass. From the name it is clear that the fishing line for a trimmer exits the coil in a semi.automatic mode. For this, the head is equipped with a mechanism through which the fishing line is submitted. Kosarya for supplying the cord must be touched by the lower part of the earth’s head in order to bring the mechanism into effect. This is very convenient, since it is not required to jam the tool motor and stop the grass of the grass.
Lengthening of the cord is carried out due to centrifugal forces. Working with a tool with a head semiautomatic device is very easy and convenient. Many masters recommend using this particular option, but do not indicate the following information:
- If you plan to use semi.automatic coils, then exclusively branded models
- Buying cheap devices is irrational, as they do not serve even several months
- Rationally buy a semi.automatic type, which are designed directly for a specific brand and a model of a trimmer for grass, since universal are often distinguished by low assembly quality
Based on the foregoing, it should be noted that it is far from always rational to buy coils for trimmers of a semi.automatic type, especially if there are models more perfect and no less reliable. automatic.
The category of gasoline lawn mowers of the office is a series of RT 41-48. Unlike many rivals, the manufacturer focuses mainly on gasoline installations than an electric drive. This is acceptable with the highest power of such technology and independence from the network. One of the best models of this class is considered RT 47 LS, which is just provided by the possibility of adjusting the height of the mowing. The modification is also capable of working in 3 different modes, with connecting the function of collecting grass, lateral release and mulching.
As for the design, the Patriot gasoline lawn mower has small dimensions, a folding handle and a fitting for connecting the hose, cleansing internal region of the deck. The power of the unit is 4.5 liters. With., and the volume of the grass collector is 60 liters. In other words, the potential of the equipment is enough for the service of small and medium.shaped plots.
The South American company Patriot is known in the middle of summer residents as a benign manufacturer of middle.sized garden equipment. The company is not so popular in comparison with the sector leaders and in some parameters can be inferior to them according to high.quality products. And yet, taking into account the price, many consumers find worthy attention of the offer in this line. An example of this is the Patriot lawmaker, which is presented in different versions and modifications. Some developments fully deserve attention based on the beliefs of operational properties.
Read how the fishing line for a trimmer for grass is wound up
The main malfunctions of the coil
Users of the electrimmer and lawn mower often face a problem associated with a semi.automatic braid head. Coil malfunctions can be as follows:
The fishing line for the trimmer does not extend automatically
If, with a light blow, the trimmer coil button for grass on the ground is not lengthened for a trimmer, then the reasons for this may be the following.
Option 1. there was a snack, t.e. Squeezing the cord between turns. This problem usually appears if the user wound a fishing line for a trimmer to the coil unevenly, with the intersection of the turns, or wound it with insufficient tension. In the latter case, when the mowing head is rotated at large revolutions under the influence of centrifugal force, the cord begins to drag on, as a result of which the interitral clamping of the fishing line is possible. To eliminate the problem, you will have to disassemble the coil on the trimmer and rewind the cord correctly, that is, with even turns with good tension.
Option 2. too short ends protrude from the head. A fishing line for a trimmer may not exit when hitting the ground, if its ends sticking out of the head, insufficient length (short). In this case, the centrifugal force is not enough for the fishing line for the trimmer to stretch. Therefore, it is required to stop the unit (drown out the engine or turn off the ethletric trimmer for grass from the network) and pull the fishing line for the trimmer manually, after pressing the button.
Option 3. a fishing line for a trimmer was soldered inside a mowing head. This leads to the fact that the coil is stopped and does not spin when the button is pressed. Basically, this happens for several reasons: poor quality of the cord, overheating of the coil with prolonged operation of the unit, a fishing line on solid items.
- In the first case, the cord of third.party manufacturers can be made of low.quality and fusible materials that do not withstand the mechanical and temperature load. Therefore, preference should be given to “branded” fishing.
- But, if you still purchased a fishing line for a trimmer of unknown quality, and it is often soldered during operation, then you can follow the example of some users who, after refueling the cord, moisten it either with silicone grease (from the spray can) or mineral oil). This procedure greatly reduces the likelihood of soldering a fishing line among themselves.
- Also, a fishing line for a trimmer can sleep if during a mowing it hit a hard object (stone, fence, dry branch, etc.D.). As a result of this, it is slightly stretched and draws back into the head with high speed. The cord is heated from friction, and its turns are sticking together. The only thing that can be done to eliminate this malfunction is to open a trimmer coil for grass and rewind a fishing line for a trimmer.
The cord spontaneously lengthens
There are situations when a user of a trimmer for grass notices a very fast fishing line consumption. At the same time, he never hit the ground with a button to lengthen the fishing line. The reason that the fishing line for a trimmer spontaneously lengthens, cutting off a special knife on the casing of the device, may be the absence of a spring in a mowing head. Often beginner users of mowers, trying to charge a fishing line for a trimmer into a coil, forget to install a clamping spring in the head, or completely lose it when opening the lid, and in the future, they do not even suspect its existence.
Also, a fishing line for a trimmer can lengthen without using a button if the spring is weakened. If the spring check confirmed this fact, then it is necessary to put several goals under it to strengthen its clamping properties.
Battering trimmers options
Battery braids for grass are ordinary in use, they intensively help clear the terrain near the house from the grass. Such devices contain batteries with an indicator for a charge. You can just adjust the bar and handle.
- Without noise, also wires can be taken care of lawns;
- the best option for amateur use;
- has a little weight and holds the balance perfectly.
The equipment is in a series, and the following enters it.
- Rod. It can be adjusted at least at any moment. It is completely suitable for those criterion when several people use the unit, and everyone can adapt it for themselves.
- The handle has the shape of a circle and simply tunes. She has 6 positions.
- The mowing unit is regulated. This can be done in four positions.
- The edge can be cut vertically. With all this, the angle can be changed to 90 degrees.
Removing and disassembling the coil
The cutting head of a trimmer for the grass consists of a lid, a spring (not in all models), bobbins with a cord, cover. Before proceeding with the disassembly of the coil of the electrical unit, be sure to turn off the trimmer for the grass from the network. The disassembly method depends on the mounting of the mowing head. First option:
- To remove the lid covering the inside of the head, click on the latches (latches) located on both sides of the head.
- Remove the lid under which you will see the coil, remove it from the case. Some trimmer coils for grass have a spring under a bobbin, which must also be carefully pulled out.
- After removing the bobbin you will see a screw in the center of the case. Unscrew with a screwdriver.
- Having removed the fasteners, we take the body of the part and, shaking in different directions, remove the gearbox from the shaft.
In the second version, the head of the trimmer for the grass is screwed onto the shaft of the gearbox. To remove it, you need to fix the shaft. To do this, in such devices there is a hole into which a thin screwdriver or metal rod is inserted. Brief Instruction:
- Insert the screwdriver into a special hole, then fix the shaft.
- Take the body behind your head and start twisting it. You need to do this clockwise, since the thread on the shaft remains.
The first way
The prepared segment (in this case is four meters) bend in half in half, one segment should be 15-20 cm longer, and insert into a special slot located on the partition.
The fishing line for the trimmer is wound in the previously indicated direction. This is done with an interference, the fishing line for the trimmer is neatly distributed. In this case, you need to wind the segment, which is longer, on the site, which is closer to the button.
There are designs in which the separation of the coil into two sections is not provided for. This does not change anything, the fishing line for the trimmer is wound similarly. You just need to make sure that the segments do not overlap with each other.
The first should end the segment that is at the bottom of the coil, t.E. Closest to the fasteners.
Read how to configure a carburetor of a trimmer for grass MTD 700
This tip is included in the corresponding hole in diameter. Lines for a trimmer
A long segment is wound for another half turn. There it is in the same way fixed. In this case, the segment crosses another part of the coil.
A long segment is wound for another half turn
The fixed ends of the spiral fishing line are inserted into the holes of the trimmer coil body for grass.
The fixed ends of the spiral fishing line are inserted into the holes of the trimmer coil body for grass.
The coil is attached to the body. The ends of the fishing line with force are pulled up so that the fishing line for the trimmer, previously fixed in the holes of the coil, jumps out of there. It is easy to recognize by a characteristic sound (click).
The ends of the fishing line are pulled up with effort
The coil with buttons is clung in the body of the coil of the trimmer for the grass.
The coil with buttons is clung in the body of the coil of the trimmer for the grass.
Trammer fishing line was successfully changed. In this case, you need to put it on a trimmer for grass again, and you can start cutting grass.
It should be repeated, there is no need to remove the coil from a trimmer for grass, this was done to clarify the process of replacing fishing line. You can disassemble the coil in place, wind it up and put it back.
Replacement of a mowing fishing line is successfully completed
Tips so that they do not touch the trimmer cover for grass, you can and should be cut off.
Easiest loading line trimmer #shorts #egopowerplus