How to remove a drill from a drill without a key

How to get a drill from a warped chuck

Here we will also talk about cases when the drill itself is damaged.

Damage is usually in the form of a broken cam or warped thread. It also happens that the drill is damaged, for example, scrolling between the cams. As a result of this, chips appear, which interfere with normal rotation, because they are hammered into various slots, which prevents rotation.

What is needed, at the beginning, of course, try to relax your fists. This is done necessarily by means of 2 gas keys or 1 in cooperation with a vice.

At the beginning, any part of the chuck is clamped with its own key and rotation is made to unscrew it. In the second, fixation of one of the parts is no longer carried out with a key, but with a vice. Since in this case a decent effort is created, the release is quite simple.

Already today, in the absence of a gas wrench, there is an option to clamp one part in a vice, and on the second one to apply light blows with a hammer on a tangent. Relaxation is obtained due to the generated vibration.

If the previous methods do not help, for example, due to the fact that the thread on the cams is torn off, then you will have to resort to the next Fri.

First you need to twist the chuck from the electric drill. I have already described how to accomplish this here. Then we clamp it in a vice and knock out the drill from the inside with a punch of a suitable diameter, which is threaded through the hole into which the spindle is inserted.

In this case, everything. These are the main solutions that there is an option to apply if you need to remove the drill from the drill. As you can see, the answer is simple. This, in special cases, requires various devices, although those of them that I have outlined are common to most home craftsmen. Hope that my advice will be of great help to you. I wish for you that not just you do not have similar problems. Until next time!

How to remove a drill with a working chuck

If everything is in order, then in theory there should be no problems with getting it. Therefore, this section is rather devoted to users who are completely ignorant of anything about a power tool, since the operation itself is elementary. But still there are a lot of people, so perhaps someone will need this information as well.

In this situation, you will need a special key to unlock the key cartridge, or straight arms to relax its quick-release analogue.

In the first case, you need to insert the key into one of the grooves on the chuck, and start rotating it counterclockwise. The promotion occurs due to the existing teeth on both objects.

In the second, the drill should be turned on in reverse (reverse rotation) mode. With one hand we hold the outer body of the cartridge, and with the other we press the start button. If your machine is not equipped with a reverse, then this is not very good. this actually should not be, since only key cartridges are placed on such devices. But nevertheless, if this happened, then it is necessary to fix the axis of the drill in some way (for example, with an open-end wrench) and rotate the outer body of the chuck counterclockwise. In general, here it would be better to remove such a cartridge and put a key.

How to remove a drill with a working chuck

If there is anything left to do for our client regularly, then in theory there should be no problems with getting. Therefore, the myth in this section is more quickly devoted to users who are completely ignorant of anything about a power tool, because the operation itself is simple. In any case, there are a lot of people, so this information may be useful to someone.

In this situation, you will need a special key to unlock the main cartridge, or straight arms to relax its quick-release analogue.

At the beginning, you need to stick the key into one of the grooves on the cartridge, and start turning it counterclockwise. The promotion takes place by using the existing teeth on both objects.

In the 2nd, the drill should be turned on in reverse (reverse rotation) mode. With one hand we hold the outer case of the cartridge, and with the other we press the start button. If your machine is not armed with a reverse, then this is not entirely great. one actually does not need to be held, because only the main cartridges are placed on such devices. Nevertheless, if this happened, then you need to fix the axis of the drill in any way (for example, with an open-end wrench) and twist the outer case of the cartridge counterclockwise. But in general, it would be better to remove such a cartridge and put the main.

How to Unscrew Keyless Drill Chuck

Greetings to everyone in the next article! Operating one on another other device, the user is faced with nasty moments. Now I will touch on one of them. In this question in the text, I decided to give some tips on how to remove the drill from the drill if you can’t do it. The prerequisites for failing to do this essentially simple thing will be ambiguous. Here I outlined the main nuances on this topic and identified three main areas that I consider necessary to disclose:

• change of drill in a normally working chuck;
• pulling out the drill without a key;
• removing a drill that is stuck due to one or another existing damage.

Let’s consider each of these events separately.

How to Unscrew Keyless Drill Chuck

Greetings to everyone in the next article! Operating one on another other device, the user is faced with nasty moments. Now I will touch on one of them. In this question in the text, I decided to give some tips on how to remove the drill from the drill if you can’t do it. The prerequisites for failing to do this essentially simple thing will be ambiguous. Here I outlined the main nuances on this topic and identified three main areas that I consider necessary to disclose:

• change of drill in a normally working chuck;
• pulling out the drill without a key;
• removing a drill that is stuck due to one or another existing damage.

39 No Drill Chuck Key? No Problem How To Remove Drill Bits Without A Key

Let’s consider each of these events separately.

How to change a drill bit in a drill. proven methods!

What repairs would cost without a good drill and drill set! However, even the most reliable tool can jam during operation. Don’t rush to panic! We will teach you how to change a drill in a drill and correctly diagnose other breakdowns.

Troubleshooting

In situations where the drill is used only for narrowly focused purposes and from time to time, users tend to send it for repair at the first problems that arise. However, in most cases, it is enough to be able to bypass the non-standard situations that have arisen. To troubleshoot minor problems, you need to know how to change the drill, whether it can be done without a key and how to act if it gets stuck.

How to remove a drill bit from a drill?

If you need to change a drill that has become unusable, or due to a change in the nature of the work, you need to put another one, then the process is even simpler than when setting the drill.

In this case, there is also a step-by-step instruction.

• Turn off and de-energize the electric drill.
• Depending on the chuck, use a wrench or turn the sleeve by hand, turning it counterclockwise, thereby loosening the chuck. Avoid touching the drill as it may remain hot for a while after use.
• After removing the previous drill from the chuck, change it to another and continue working or put the tool away for storage.

If you cannot turn the cartridge the first time, do not rush to the workshops, most often it is enough just to put in more effort.

Replacing the drill

To carry out this procedure, you first need to get the old drill according to the scheme described above, and then put a new one. Electric drills with keyless chucks often have problems due to the fact that the drill is firmly seated and it is not possible to unscrew the coupling. In this case, you can use a piece of cloth that will give more grip on the clutch and try to unscrew it. If this method did not help, then you need to firmly fix the drill with your hand and hit the chuck tangentially in the direction of unwinding with the palm of your other hand, continuing to fix the tool.

Subtleties of operation

Electric drills began to appear at the end of the 19th century almost immediately after the invention of electric motors. The main task of the introducing tool with an impact mechanism was drilling various holes in materials using electricity and rotating drills at high speed.

Already from the description it is clear: in order to use such a tool, you need to follow certain safety rules.

• Before starting work, it is imperative to inspect: a drill, so that there are no open electronic (live) parts; the wire going to the network so that it is not damaged; a plug so that it is solid and working; the outlet so that it is serviceable and fits snugly in the wall. In this case, the plug must be firmly inserted into the socket and there must be no sparks.
• Insert the drill into the drill as tightly as possible.
• Select the required mode: drilling (twisting the drill at high speed) or drilling (drilling using a hammer mechanism).
• Select the maximum torsion speed of the drill.
• After making a hole of the required diameter and length, press the off button, and then remove the plug from the socket so as not to accidentally start the tool when not required.

It is worth noting that there are functional drills that recognize the diameter of the drill, have stops for fixing the desired drilling depth, have handles for greater fixation of the tool in the hand, and automatically change the drilling speed. Such functional drills require additional settings so that the automation does not fail at the most inopportune moment.

The drills are selected in accordance with the requirements for the work being carried out. But it must be remembered that they are different, and some drills do not fit a particular drill.

Here the main role is played by the tool holder, which is:

• key;
• quick-clamping.

The first option assumes that the user has a special key that can be used to loosen the cartridge. To do this, you need to use the hole on the drill and turn the key counterclockwise or turn it clockwise, and thus clamp it. Often this key is attached to the drill, which reduces the likelihood of losing it and allows you to remove the key from the mount and use it at any time.

The second option is something different because the quick-release can be:

• single-seat;
• double-clutch.

If you use a single-sleeve chuck, you only need one hand to clamp, and the second option is a little more complicated: you have to clamp one sleeve, and with the other hand, turn the other sleeve. Both options save time, but the retention is much worse than using a key chuck.

How to insert the drill into the drill correctly and how to remove it?

In any living space, sooner or later, a situation arises when something needs to be redone: hang a picture, screw on shelves or make wiring. But most concrete and brick walls cannot be easily pierced with a nail and a screw cannot be screwed into them. Therefore, you have to resort to using an electric drill. This is a convenient device that allows you to make a hole in the wall of the required diameter thanks to a variety of drills: for concrete, metal, glass, plastic, tiles or wood. But for the successful use of an electric drill, you should know the basic rules for using this tool.

Keyless drill removal

Key chucks have a definite advantage. the fixation of the drill is very powerful, but there is also a drawback. it is necessary to have a key at hand. If the key is not in place, it is quite easy to make up for this deficiency. You will need to find an object that can fix the cartridge on one side. This can be a nail, Phillips screwdriver, screw, hexagon of a suitable size. To the second half, you need to make an effort with your hands and try to untwist it. this way it is possible to pull out the drill without a key. But if you can’t handle it with your hands, you can use a vice or a large gas wrench of a suitable size.

How to insert a drill into a drill?

This operation is simple and quick, however some rules must be followed. Step-by-step instructions will keep you safe while setting the drill into the drill.

• Disconnect the instrument from the mains.
• Then choose a suitable drill, taking into account the nature of the work, the material in which the hole will be made and the compatibility of the drill with the drill.
• Place the drill into the chuck with the shank inward.
• Then you should fix the cartridge, taking into account its appearance. If it is key, then fix it with a special key with teeth, if it is quick-clamping, then fix it with your hands.
• After the drill is locked in place, make sure that it does not wobble in the chuck and that there is no play.
• Then you can get to work.

It should be noted that the choice of drills depends on your electric drill. There are various models with a variety of technical equipment and capabilities. Some drills cannot, for example, be used for metal work. Others. allow the installation of drills with a diameter of 0.8 to 10 mm or 1.5 to 13 mm. It is not recommended to buy cheap drills made of low-quality metal, it is better to overpay, but make sure that the tool works properly and for a long time.

The drill is stuck

There are situations when at the end of the work it is not possible to remove the drill. Neither unwinding the couplings by hand, if the chuck is keyless, nor the key, if the chuck is key, helps. You tried to turn on the drill and, using the reverse, tried to reach the object, but it did not work. We fixed the drill firmly and tried to loosen the cartridge with tangential blows, but this did not bring the desired result either. So it’s time to turn to more massive equipment.

There are not so many ways to remove the drill from the drill:

• Vise and gas wrench. The method involves the use of two gas wrenches or one wrench and a vise. It is necessary to firmly fix one half, and try to shift the other with a key.
• Vise and hammer. One half is fixed in a vice, and the other half moves from a dead center with tangential hammer blows. With the help of the generated vibrations and sharp point effects, it is possible to solve the problem.

If the methods above did not work, then you can completely unscrew the chuck together with the drill, fix it in a vice and, picking up a screwdriver or some metal rod of the required diameter, knock the drill out of the chuck.

For information on how to properly fix the drill in the drill, see the next video.

How to create the optimal set of drills?

The drill is intended for making holes in a layer of any material and enlarging, reaming of existing holes. Basically, it is a tool with a rotary cutting motion and an axial feed motion. It has many varieties and copes well with many tasks, not only in everyday life, but also at an industrial level. In order to create an optimal set of drills, you should not purchase the entire assortment. You just need to decide what type of work is to be done.

The main choice is to choose the right drill, not only in size, but also for the purpose. Therefore, the material in which the hole is supposed to be made matters. Namely:

• if you have to work with wood, then it is worth using special drills for wood. Spiral, flat and ring tools can be used here. Using a twist drill, it will be possible to create a hole 8–28 mm in diameter and 300–600 mm deep. This is the most common type of drill. To make a blind hole up to 10 mm in diameter, use a flat drill, and to drill wide recesses with neat edges use an annular.
• To make holes in soft materials that lend themselves to the blade of a knife (drywall, plastic, softwood), feather drills are used. Such a tool cannot be used to drill out existing holes.
• to drill metal, cast iron, cermets, you will need a more durable option. Twist drills, the head of which is made of high speed or alloy steel, will help here; two helical grooves pass along their shaft, forming cutting edges.
• if a brick has come to hand, in which it is necessary to make a couple of holes, then special drills with soldered tungsten or cobalt hard alloy will come to the rescue, the so-called “win”. They can also be used when working with concrete.
• for working with granite, winder drills with a stronger head are used than for drilling concrete. These can be plates of medium and high hardness.
• you can make a hole in a tile or glass using a special tool. This is a drill with a diamond or victorious head. The diamond tool will take longer to work, but the glass / tile is less likely to break. The victorious drill does the job faster, although it leaves a chance of errors in the form of material splitting.

The appearance of the cutting tool can influence the final choice. A quality drill has no dents, scratches, chips or other visible defects. The cutting edges of the tool must be sharpened and evenly colored. The color of the rod is of particular importance, it can be used to determine how the drill was processed:

• a steel gray color indicates that no hardening treatment has been carried out;
• black color indicates that the tool has been treated with superheated steam;
• golden. vacation takes place here to relieve the internal stress of the metal;
• bright gold color indicates that a protective layer of titanium nitride is applied to the drill.

The degree of processing affects the strength, durability and cost of the drills. If you plan to use them often, then it is better to purchase better quality and more expensive drills. You should not buy them from little-known manufacturers who are not able to guarantee quality. Choose wisely and your tools will last you a long time.

How to change a drill in a drill without a key

As is clear from the subtitle, here we are talking about key cartridges.

The most common method is to use a Phillips screwdriver or a nail of a suitable diameter, which is inserted into any of the available recesses on the chuck, thereby securing the first half of it. You can try to twist the other half by hand. Usually in this way it turns out to be quite easy to unwind.

However, if it does not work out this way, then you can use a gas wrench or a vice instead of a hand. Using them, you will be able to create the necessary effort, which is most likely enough to carry out cranking.

If these steps still don’t work, try what is described in the next section.

Some general information

A drill is a tool for drilling holes. The varieties include a hammer drill and an electric screwdriver. In all structures, the movement to the working element is transmitted from the energy source through the cartridge, in which the working element is fixed.

For drills, a tool is used that is a cylindrical metal rod. It consists of three parts. the working part, the shank and the neck. The shank is used for fastening, which may differ in the shape of its cross-section (circle, triangle, quadrangle). In most cases, machines with a round shank are used. The drills have different diameters, as well as the length of the shank and working part.

How to remove and disassemble a taper chuck Morse taper

Cartridges with a cone are extremely rare, but if you have just such a copy, then you probably want to know how they are removed. Often, old electric drills and drilling machines have the type of cone mounting, so if the chuck on the tool is out of order, then to replace it, you will need to perform the following steps:

• Spread the jaws to the sides and unscrew the locking screw with the right thread (the cone screws are installed with the regular thread)
• Fasten the tool, and picking up a hammer, apply light blows to the back of the device
• After each impact, turn the outer sleeve clockwise
• If the internal mechanism is rusted, then before carrying out work, use WD-40 grease.
• There are times when even lubrication does not solve the problem, so you should use a blowtorch, warming up the part to red
• If, in this case, the cartridge cannot be disassembled, then the last option remains. to disassemble the drill and grind off the side parts of the device on emery. Some craftsmen prefer to saw the executive body directly on the tool with an angle grinder.

With a barbaric approach to disassembly, the element can no longer be repaired, and after dismantling, it is necessary to install a cartridge of a similar design. To put a threaded chuck on a drill, you will need to make changes to the design of the drill, which is also quite realistic to do with your own hands.

Now we will consider a method for disassembling a part for the purpose of its subsequent repair. The disassembly method is simple and does not require the use of a sledgehammer or angle grinder. In this case, the main condition must be met. the absence of corrosion processes on the thread. The principle of dismantling a cone chuck from an impact drill is as follows:

• Flatten the jaws into the part
• Place the instrument on a flat surface (on a table)
• Press a piece of expanded polystyrene to the end of the tool (you can use high density foam)
• Press a piece of dense material to the expanded polystyrene. a board or metal
• Set the percussion mode on the drill. If there is no impact mode on the drill, then to disassemble the cartridge, it must first be fixed on the perforator
• Press the structure tightly to the chuck and press the start button
• Literally in 10 seconds, the cartridge with the type of attachment in the form of a cone will unroll on its own

Chucks for drills with a Morse taper belong to the category of collapsible ones, so if one of the jaws fails, they can be replaced. This is the only type of drill chuck that can be disassembled and repaired if the jaws or clamping sleeve fails. If it is necessary to assemble the cartridge, then this is also done easily. To do this, press the outer race onto the clamping sleeve and then install it on the tool axis. The video below shows how you can disassemble the drill chuck with a hammer.

What are the types of drills

Twist drill (universal). The classic type of drill bit, with which you can work with wood and other surfaces. The maximum length of screw drills reaches 27.5 cm. The diameter of the screw drills ranges from tiny (0.1 mm) to giant (8 cm). The capabilities of the twist drill depend on the material from which it is made.

Deep hole drills. drills with a double helical channel, due to which a higher breaking torque is achieved for especially deep holes. A special emulsion flows through the channels, which is created to cool the drills during operation.

Flat drills. the cutting edge of this type of drill is made in the form of a spatula with a sharp nib in the central part. This type of drill is designed for drilling wide holes. Most often used when drilling wood.

Hollow core drills are drills designed to drill ring-shaped holes in a material. Such a drill is popularly called a drill for crowns.

Single sided drills. drills for high precision drilling. Due to the fact that drills of this type cuts only one side, the accuracy of work with it increases significantly.

Center drills. special drills for making center holes in the surface of materials.

Option using klupp

Thread cutting scheme using a die cutter

The simplest version of threading is carried out using a die. Klupp is a modernized ram that is equipped with a special ratchet and guide. Most often commercially available as a pipe threading set.

With this tool, the cutting process is performed as follows:

• the die of the required diameter from the set that was purchased is installed in the ratchet;
• oil is applied to the cutting edges;
• a guide is put on the edge of the pipe;
• the twisting of the ratchet begins, cutting the thread;
• during operation, the cutting edges and the pipe are lubricated.

Varieties of the instrument

The tool that is used to create threads is called a tap. These are cylindrical rods made of metal, on the edges of which there are sharp incisors located in a certain sequence. Taps are classified according to several factors:

• Method of use. A special knob for work is supplied complete with hand tools. Tooling for machine tools fixes in the chuck thanks to the cylindrical shank.
• By the type of holes to be machined. The devices are divided into two groups. Some are used for through-hole machining, others for deaf.
• For cutting internal, metric, pipe threads.

The shape of the taps can be either cylindrical or conical.

How to release the keyless chuck

To release the double-sleeve chuck, turn the sleeve so as not to break the ratchet. For this you need to use a variety of plumbing. keys, otherwise you will have to completely disassemble the drill and unscrew the head. And this means that you need to unscrew the screws on the case and remember the location of the parts to sort out the drill.

With a single-seat structural element, the procedure does not change, that is, try to unscrew it first with the help of plumbing. key, and then simply disassemble the drill and remove the chuck, disassembling it.

In the event that the drill is expensive, you need to make several cuts. Dirt can also be a problem if it gets inside and causes the mechanisms to get stuck. It can be sand, earth with water, or rust. In this case, you need to remove the insides of the drill and clean it thoroughly, and then begin to take out various pebbles and pieces of grass.

Note! It is better to shoot with a phone or record a video of all stages of disassembling the instrument, as there is a chance to forget something or start pulling out the wrong parts.

What to do if a drill gets stuck in a drill

There is often a problem with the drill bit jamming in the drill head and it is not easy to solve this problem. Many people wonder how to remove the drill from the drill if it is jammed. This article will describe all the ways to get out of this situation.

There is such a tool in almost every home.

How to spin a drill without a key

How to spin a drill without a key? Many people ask this question, especially when the key is lost, which happens quite often.

You need to get two screwdrivers: Phillips and flat. The first step is to insert a Phillips screwdriver into the key hole, and a flat screwdriver into the groove for the teeth. Then they pull the screwdriver in the direction of untwisting, and the crosshead acts as a lever. In this case, with a minimum of effort, you can unscrew the head and solve the question of how to unscrew the drill without a key.

Using a vise

Coupling or quick-detachable elements can be unscrewed with a vice. To do this, you need to firmly fix the vice, then tighten the coupling (s) in them.

If the drill is switchable and it is possible to turn in the other direction, then start turning slowly increasing the power, and with a small probability the cartridge can wedge.

How To Change A Corded Drill Bit Without The Key

When the drill rotates in only one direction, you need to wedge it by hand, hands or plumber. keys.

Note! You cannot immediately accelerate the drill to maximum speed, because there is a chance to break the vice or break the cartridge.

How to determine the type of cartridge

Determining the type of head is not difficult. The key holder must have a key hole where it will be inserted for tightening. The keyless clamp has no key holes, but has a clutch.

To determine the type of keyless chuck, you just need to look at the number of couplings: for a double-sleeve one, one coupling will be near the drill, and the other behind. One sleeve has only one coupling.

How to release the key cartridge

The key cartridge is much easier to release. First, you should try to free the drill in the usual way, simply by increasing the handle of the key and asking for help.

If the part is jammed tightly, you need to sort out the drill, then remove the head and replace it with a new one. In the event that the drill is expensive and you need to get it in any case, you should disassemble or cut the cartridge itself.

You can also find dirt that got into the drill and prevents it from spinning. Then you need to remove all components and remove dirt from the cartridge.

Drill head types

Before figuring out how to pull the drill out of the drill, you should understand what fastening mechanisms the manufacturers use.

The key type is very reliable, but as the name suggests, a special key is needed for tightening. It drives special cams that hold the drill firmly in place. This type is the most reliable, but the fixing time of the drill is poor.

Keyless heads are keyless and hand tighten by the user.

Keyless chucks are divided into two more types:

Consists of two couplings, which means that you need two free hands to fix it. Of the advantages, one can single out the fact that such couplings are more reliable and less effort is needed for fastening.

Double clutch quick-release

• Single-sleeve

One sleeve is much more convenient, since only one hand is used for fastening. This type of cartridge provides the absence of backlash, but more forces for tightening must be applied.

Varieties and causes of drill jamming in an electric drill

There are several reasons why an electric drill can jam.

The most obvious reason for a breakdown is a factory defect, such a problem most often occurs in very cheap and low-quality drills. That is, the tool of the companies Bosch, Makita, Metabo, Interskol will be less confirmed to be defective. That is why such equipment is popular.

• Violations of the rules for using the tool

Even the most reliable tool can fail if misused. And here it is no longer important who the manufacturer is. the same Bosch or Makita are even more susceptible to breakdowns if the operating rules are violated.

This reason is not tied to a specific brand or parameter of the instrument, but some brands provide for this point and make protection from an inexperienced user.

If the tool is misused or stored, the main part of the drill can easily break. This is a very common problem, but it cannot be called a marriage.

Attention! Most often, the device breaks down due to the user’s negligence.

In the first two cases, it is most likely that it will not work to fix the tool at home. In the case of the third problem, you can do everything yourself. But first you need to determine the type of cartridge.