How to remove the head of the Stihl lawn mower. The cord is not served, the coil does not spin

remove, head, stihl, lawn, mower, cord

Installation of a coil with a fishing line on a trimmer for STIHL grass

Many users of trimmers are wondering: how to replace the cord, by default used in this kind of devices? Unsafe experiments begin to carry out, installing metal or copper wire, metal cables or strings in a mowing head, as well as a regular fishing fishing line for a trimmer. If you install a metal cable instead of fishing line, then a trimmer for grass turns into a dangerous device not only for the user, but also for others. This fact is explained by the fact that during the operation of the unit, the steel cable will be gradually shut up, its ends are gradually released, and small pieces of wire will fly in different directions at high speed. A similar one happens when using steel or copper wire, only with the difference that the torn pieces will be larger and can cause a significant injury. And if you accidentally hook your or someone’s leg, working as an unit with a steel cable (wire), then a strong and deep section of the fabrics, and in some cases, amputation of the fingers are provided with you. The manufacturer is not in vain for these purposes, nylon uses, since it is quite light and durable, and when separating he does not fly away and cannot cause injury. It is possible to use a fishing fishing line for a trimmer in a trimmer instead of a standard one, of course, but this will add unnecessary trouble, because it quickly wears out, breaks, mows slowly and does not fit for cutting hard grass. In addition, during the work, a lot of time is lost to replace the broken tool more than once. In practice, the installation of a regular fishing line is justified if the user is going to mow grass near the fence, especially if he is from a rabid grid. In this case, in order to protect the standard and sometimes expensive cord from wear, it changes to a fishing fishing line for a trimmer, which is not a pity. Usually, in order to change the cord to a fishing line for a trimmer, it must be selected the greatest thickness-2-3 mm.

I want to devote today’s article to the sore topic of summer residents and gardeners of the entire post.Soviet space “How to refuel a fishing line for a trimmer in a trimmer for grass”. Not many trimmers manufacturers in their operating instructions answer this question. Therefore, it is hard for ordinary gardeners to figure out how to do it right.

I want to start with a brief description of the technical characteristics of trimmers.

So, trimmers for grass are electric and gasoline. The cutting element of trimmers can be a fishing line for a trimmer and a knife. The fishing line for the trimmer is ordinary, four. five.sided and intertwined (in the form of pigtails). Knives are from 2, 3 and four lobed knife. Knives are also plastic and metal.

The system for feeding fishing line from a trimmer for grass is manual, semi.automatic and automatic.

Development engineers who create new models of trimmers clearly calculate the diameter (thickness) of the fishing line for the trimmer and the number of knife blades, according to the power of the trimmers. Otherwise, the engine is overloaded, which as a result leads to its breakdown. And these are additional and significant costs.

Today, the market is presented on the market: the grass:

With one nozzle. only Leskova. With two nozzles-Leskova and three-four-blade knife. With one nozzle-only a three-four-blade knife.

Our Kulibins have long learned to improve any mechanisms. So, for example, some gardeners make successful, in their opinion, replacement of fishing line with a metal cable, or fishing fishing line for a trimmer. But at the same time, they do not think about the safety of their loved ones, because as a cable with the power of a working trimmer for grass can easily break out and not only injure the mower and others, but leave a cripple for life. The use of a fishing fishing line can and gives the best effect, I have never tried personally than a fishing line for a trimmer for a trimmer for grass, but such work has a number of inconvenience: when in contact with solid objects, it is located or may simply be pulled out of the reel.

So, what is called closer to the topic. I give an example of how to refuel a fishing line for a trimmer in a trimmer for grass (a trimmer for Bosch Art 30 grass). Everything is very simple. Started.

After you have chosen a fishing line for a trimmer for refueling, you need to cut off the required amount of fishing line, because, as the entire fishing line for a trimmer in a skein is not wound into a coil.

Remove the coil and a protective casing from the coil.

Removed. We fix one end of the fishing line in the gap and neatly and evenly wrap the fishing line for the trimmer.

The amount of fishing line should be so that the protective casing of the coil closes and the fishing line for the trimmer on the coil is slightly unwound.

The second end of the fishing line is seated in the hole on the protective casing.

Next, take the coil and the protective cover of the coil. We sit the end of the fishing line from the coil into a metal hole on the protective cover of the coil. Put a little fishing line for a trimmer.

We put it all on a trimmer for grass. Turn the coil clockwise to click.

Fastened. Now we connect a trimmer for the grass to the network. Put a trimmer for grass in the original position for work. We turn on a trimmer for grass. Excess fish length will be cut off on the trim blade.

Place for storing a spare coil

Such a fishing line for a trimmer is installed in a coil is very simple. according to the internal scheme inside the coil. The center of the fishing line with a metal mount is inserted in the upper part of the coil, and draw the ends of the fishing line along the grooves and remove.

Fishing line refueling in a trimmer coil for grass

Step-by-step instruction of the Autocut 25-2 Stihl braid head

Open the mowing head by pressing the side of the recesses in it. Click inward first one side so that the constipation comes out of the hook, and then press the other. After that, remove the lid of the mowing head.

It is worth suffering a little.And the power of Hercules will not help you.Only with time you understand how to quickly disassemble it.If you have a Chinese head.It will be disassembled a little easier (plastic is thin).They are also found with the inscriptions “Push and Twist” in the translation “Press and turn”

After you remove the top cover, you need to get the cord holder, while be careful and do not lose the spring

Take two strings (about 2 meters). Insert the end of one string into one of the coil ears and wrap the string in the indicated direction. Make sure that the string is evenly distributed and tightly wound. Season the end of the string in one of the coil holes.

If the Chinese head.Measure the right amount of fishing line (4-5 meters) and fold it in half.Throw a folded fishing line for a trimmer in the middle on the holder (it has a special slot) and begin to wind the cord so that every mustache lies in its own compartment of the holder.

Insert the coil into the mowing head. Pull the ends of the string from the coil holes and season them into a special groove of the mowing head

And here you perfectly understand that buying a fishing line with a diameter of 3 mm was your mistake. As a rule, the recommended diameter of the stihl 2 coils.4 mm

But if you have a Chinese head. Then this rule does not concern you. Some buyers said that 4 mm managed to put to put. True, the coil is quickly crashed.

Remove the mustache over the eyes and set the top cover of the head, combining the side latches.

P.SNA courses for sellers of STIHL techniques told us that in order to increase efficiency it is necessary to throw a coil with a fishing line for 20 minutes into water. I have not tried it myself, but I think these guys will not deceive.

Bryansk region. G. Unuchee st. Volodarsky d. 2.

The process of winding the fishing line on the reel

  • After all the preparatory actions, we need to correctly decide how exactly a fishing line for a trimmer, by turning the cover or in the opposite direction will be washed on your device.
  • We measure approximately 7 mm cutting material and at one end we insert it into the opening hole. It is worth noting that the fishing line for the trimmer is wound precisely on the model of mowers from two side. The direction of winding of the fishing line in such models is indicated on the bastard itself.
  • The fishing line for the trimmer is excreted to about 17 cm freely so that weeds can be cut off with the ends. Add that you should not wrap a fishing line for a trimmer for a huge length coil. About 5 mm leave the distance from the fishing line to the edge.
  • The two ends of the fishing line are inserted into the holes. Both of these ends should be reliably fixed on the device case.
  • The springs extracted from the coil (if any) insert the same as they were extracted, t.e. in the backlog and the body of the head itself.
  • To determine whether you have inserted a fishing line for a trimmer in a trimmer for grass, you need the element itself (bobbin) itself can easily be inserted into the body of the head of your device. If necessary, remove the free ends of the fishing line to the outside. To achieve this, you need to pull a fishing line for a trimmer through the holes in the bobbin with a sharp movement.

So, let’s say, you figured out how quickly, and most importantly, to correct the fishing line for the trimmer to the trimmer coil for the STIHL grass. All that you have left is to insert everything into the grooves and fix the main cover on the device. Then you can press the bobbin itself and make movements counterclockwise until you feel the emphasis. If you do not feel the emphasis, then most likely you were not corrected for a trimmer for a trimmer and you will have to start everything from scratch.

Coil with one working osik

The most ordinary option and a light sequence of actions:

  • The dimensions of the bobbin and the length of the unique factory winding determine the length of the fishing line recommended for winding. 2 5 m.
  • One end of the fishing line is inserted into the squeezer.located squeling fixing technological hole.
  • The fishing line for the trimmer is wound on the drum in reviting the spilles on the trimmer product direction. usually, on the inside of the bobin, the arrow indicates which direction the winding is carried out.
  • The small section of the fishing line is left free to withdraw it out. it is fixed in the special side on the inside of the bobbin created to keep the winding when assembling a spool in working condition.
  • The left end of the fishing line is passed through the hole of the outer part of the bobin.
  • Half of the bobbin are collected and put on the bar of the trimmer device.

Two working antennae

In this type of spools, the number of grooves for winding the fishing line lying on the inside of the coil should be determined:

For both cases, a fishing line for a trimmer 2-3 m long is taken. In a single.captable coils, the fishing line for a trimmer stretches into a through hole, its ends (antennae) are folded together and aligned, after which they are wound in the back of the rotation of the bobbin on the bar the side. inside the arrow is usually indicated the correct direction of the winding.In the presence of fixing grooves, the ends of the fishing line are threaded in them or hold their free arm fingers, spread into the through hole of the outer half of the bobin, the spool is closed and attached to the bar of the trimmer product.

The difference between the winding of the fishing line in the two-to-dancing coils is that initially a line of fishing line 2-5 m long is folded in half (to determine the middle fold), and the bend loop is inserted into a special groove between the grooves.Both strains of the fishing line are wound each in its own groove, fixing the antennae and assembly of the coil is similar to the option considered above with one groove.

The first implementation of this procedure may seem long and quite time.consuming, but over time and experience, this task will be solved much faster and easier.

The video below will clearly show how to refuel a fishing line for a trimmer to the coil of a trimmer for the grass and correct it correctly. this operation is not a complicated one and, with some patience, will necessarily be crowned with success:

Preliminary preparation

At first, for winding the fishing line is required take off

Coil (bobbin, spool) from a trimmer for grass. certain acts will depend on the difficulty of configuration and the type of product itself:

  • Small electronic trimmers for grass with a working location of the motor and coils at the bottom, usually have side buttons on both sides of the bobbin. With the simultaneous press on their highest part of the coil, together with the internal contents for winding the fishing line is disconnected, while the lower remains on the trimmer. The analysis of the bobbin is better to create in an even smooth place, so that the spring does not jump out and not be lost;
  • Electronic and gasoline trimmers for grass with a curved rod without the ability to install a knife, usually have coils with a special lamb: in similar structures, you should with one hand with one hand to hold the rogue in a motionless position, and the other counterclockwise twist the fixing bobbin on the staging barack. After disconnecting the nut, the whole bobin is removed.
  • Electronic and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and with unhurried rotation, such mutual placement is achieved when the screwdriver enters the holes and the bobin is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

For the second and third options of coil, depending on the design, are versed in different methods. In the bobbins with a lamb, lamb is twisted, in the reels with the latches, the fixers are pressed and one part of the coil is freed from the other. If the halves of the spool are connected by thread, then they are quite turned with their hands in the back sides until they are completely developed.

Preliminary preparation

At first, for winding the fishing line is required take off

Coil (bobbin, spool) from a trimmer for grass. certain acts will depend on the difficulty of configuration and the type of product itself:

  • Small electronic trimmers for grass with a working location of the motor and coils at the bottom, usually have side buttons on both sides of the bobbin. With the simultaneous press on their highest part of the coil, together with the internal contents for winding the fishing line is disconnected, while the lower remains on the trimmer. The analysis of the bobbin is better to create in an even smooth place, so that the spring does not jump out and not be lost;
  • Electronic and gasoline trimmers for grass with a curved rod without the ability to install a knife, usually have coils with a special lamb: in similar structures, you should with one hand with one hand to hold the rogue in a motionless position, and the other counterclockwise twist the fixing bobbin on the staging barack. After disconnecting the nut, the whole bobin is removed.
  • Electronic and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and with unhurried rotation, such mutual placement is achieved when the screwdriver enters the holes and the bobin is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

For the second and third options of coil, depending on the design, are versed in different methods. In the bobbins with a lamb, lamb is twisted, in the reels with the latches, the fixers are pressed and one part of the coil is freed from the other. If the halves of the spool are connected by thread, then they are quite turned with their hands in the back sides until they are completely developed.

Two working antennae

In this type of squelpies, you should find the number of grooves for winding the fishing line lying on the inside of the coil:

The difference between the winding of the fishing line in the two-to-dancing coils is that initially a line of fishing line 2-5 m long is folded in half (to determine the middle fold), and the bend loop is inserted into a special groove between the grooves.Both strains of the fishing line are wound each on their own groove, fixing antennae and assembly of the coil is similar to the option considered above with one groove.

The 1st implementation of this procedure may seem to be long and quite laborious, but over time and experience, this problem will be solved significantly more freaky and easier.

The video below will clearly show how to refuel a fishing line for a trimmer to the coil of a trimmer for the grass and correct it correctly. this operation is not a complicated one and, with some patience, will necessarily be crowned with success:

Reasons why the lawn mower does not develop momentum

There are five main reasons why the trimmer for STIHL grass does not develop turns:

Low quality fuel use

Benzotrimmer does not gain momentum in case of low quality fuel. He may stall or not start at all. To check the quality of the fuel, you need to inspect the candles. They are the main indicators for problems with the combustion chamber.

In the presence of sediment, plaque formed on the candles, the old fuel is drained and flooded another, high.quality.

It must be remembered that a trimmer for grass or a lawn mower should be refueling good quality gasoline and those fuel brands that the manufacturer indicated in the technical passport of the device.

Note! Candles should be thoroughly cleaned of plaque, and only after that place again in the combustion chamber of fuel.

Air or fuel filter pollution

There is a lawn mower does not gain speed, the reasons may be polluted by the filter element: air or fuel.

When blocking the air filter, there is a lack of oxygen in the combustion chamber, so the fuel is not fully produced, which prevents the desired speed and power.

To check if the cause is really in the air filter, you need to remove it and turn it on. If the lawn mower still does not gain momentum, the reasons are not in it. So you should check the fuel filter element. Everything is similar here, only gasoline acts as oxygen. If this filter is damaged, there will be a lack of fuel, which inhibits the development of revolutions.

In one and another case, the output is simple: you just need to replace the filter. If there is a spare, install it, if not, to purchase in any specialized store, is inexpensive.

Problems with ignition candles

When a benzotrimer is used often, you need to monitor the state. This part is susceptible to wear, so they need to be regularly examined: is there a Nagar on them.

You can solve the problem in two ways: clean the old candle from Gary or purchase a new one.

In the first case, you need to unscrew and swing with sandpaper, dry. The distance between the electrodes should be 1 mm. Trimmer for grass is collected and advanced.

In the absence of a spark between the electrodes, it is worth inspecting the quality of the connections of all the elements of the circuit. If in this case everything is fine, then 100% you need to change the candles.

Replacing them is easy and inexpensive. From the tools will be needed a key, supervisor.

Important! With frequent appearance of soot on the candlelights, it is worth looking for a reason a little deeper. Candles should be carefully cleaned of plaque

Candles should be carefully cleaned of plaque

Problems with the engine

Engine problems. already more serious. There are several options for a malfunction:

In the case of the problem of the carburetor, you should first pay attention to the condition of the cable. It can be weakened, which led to a problem

A simple adjustment of the cable is required here.

If this did not help, then you need to check the use parameters. These operating standards can be found in the technical passport of the device. Sometimes it’s enough to disassemble the device: to wash and collect and assemble.

note! The solution to the problem with the carburetor may be the purchase of a new element or by contacting the service for professional services. The trimmer drive is subjected to a full check only if the manipulations with the carburetor were not given the proper result

The trimmer drive is subjected to a full check only if the manipulations with the carburetor were not given the proper result.

remove, head, stihl, lawn, mower, cord

FLOOK DISCOUNSE

The lack of fuel circulation in the system can also be the reason why the device does not gain momentum. There are several options for why this is happening:

You can eliminate problems yourself. For this you need:

  • remove blockages from the gasoline pump;
  • update hoses, pipes for fuel circulation;
  • Clean the muffler and mesh on it;
  • Reinching a new catalyst.

Do not worry when such problems arise. This does not mean at all that the unit of poor quality. If the Patriot trimmer does not gain momentum, it can be repaired with your own hands without contacting the service.

Failure of spark plug. an algorithm of action

The relatively high price of STIHL products can be scared away by many, but if you think about what is more important. reliability and good result or savings that are in harm with the quality? But, if you set out to save money, we offer you an option for the lawn mower with your own hands, collecting the device with your own efforts you will know all the nuances and the structure of the tool.

Of course, you can choose cheaper Chinese counterparts, but then no one can vouch for the result of the final work and for the life of the service, which is very short.lived among such models. So it is more profitable to purchase a mow from an authoritative company once, which is certainly Stihl, and enjoy stable work for many years of operation.

How to lubricate a trimmer gearbox for grass / Gearbox gearbox / Reducer Motokosa

Lubricate a trimmer gearbox for the grass at least once a year, but it is better to inspect the lubricant after every 20-25 hours of work or when the gear noise in the motorcade gearbox appears. How to lubricate the gearbox gearboxes. For lubrication, at first you need to clean the cork itself and the place around the traffic jam and the remnants of the grass, so that they do not fall inside the gearbox when filling it with grease. Then you need to turn out the cork for the lubrication of the gearbox (for example, the Echo lawn mower is a key for “17”, in Husqvarna-a 6-garnet on “5”, for Chinese lawn mower-the key on “12”). It is better to use the same manufacturer as your trimmer for grass or just from world-famous brands, such as Oleo-Mac, Stihl, Husqvarna, Oregon, Liquimoly, Litol-24, Azmol 158 and T.D., If only it was not a fake! The tube, if new, print, removing with your fingers a cork or piercing the cover with the back of the lid in the nose of the tube. Then we put a trimmer for the grass on the left side, and rotating the knife with one hand (so that the gears are smashed and the entire volume is filled), squeeze the lubricant from the tube with the 2nd hand through the hole inside the gearbox before its full filling. Then we twist and clamp the trimmer gearbox for the grass and a tube plug with a lubricant. If the lubricant is not in the tube (and, for example, in the jar), take a honey syringe without a needle, take out the piston, fill the lubricant (with your finger) in the syringe, and then fill the gearbox of the trimmer for the grass from the syringe from the syringe.

First of all, to wind the fishing line, it is required to remove the coil (bobbin, spool) from the trimmer for the grass. specific actions will depend on the complexity of the configuration and the type of product itself:

  • Small electric trimmers for grass with a working location of the engine and coils in the lower part, as a rule, have side keys on both sides of the bobbin. With the simultaneous press on them, the upper part of the coil, along with the internal contents for winding the fishing line, is disconnected, while the lower remains on the trimmer. It is advisable to analyze the bobbing in an even smooth place, so that the spring does not jump out and not be lost;
  • Electric and gasoline trimmers for grass with a curved rod without the ability to install a knife, as a rule, have coils with a special lamb: in such structures, you should hold the spool in a fixed position with one hand, and rotate the fixing bobbin on the bar with a barack’s baracks. After disconnecting the nut, the whole bobin is removed.
  • Electric and gasoline trimmers for grass with the ability to install a knife on a straight rod (for example, trimmers for STIHL grass) have a hole. For the immobility of the bar, a screwdriver or another suitable object is inserted into this hole and, with slow rotation, such a mutual arrangement is achieved when the screwdriver enters the hole and the bob is fixed. After that, the coil body is scrolled clockwise (with the left thread) and removed from the trimmer for the grass.

For the second and third cases, the coil, depending on the design, are versed in various ways. In the bobbins with a lamb, lamb is twisted, in the reels with latches, latches-fixers are pressed and one part of the coil is freed from the other. If the halves of the spool are connected by thread, then it is enough to turn them with your hands in the opposite directions until they are completely developed.

The nozzle of the cutting block

The cutting block is the main component of the Philips styler. He has short and sharp edges, and it is used to quickly and accurately trim the hair in length.

remove, head, stihl, lawn, mower, cord

Stuck Pull rope on Honda lawn mower

To remove the cutting block from the styler case, check the presence of the disconnection button on the styler case. If it is present, click the cutting block removal button.

If there is no disconnection button on the Stayler, place your finger under the teeth of the cutting block and put it out of the device. For re.installation, insert the lower part of the cutting unit into the styler case, and then push the part with the teeth to the click. Do not make excessive efforts; This can lead to damage to the device.

If you fail to install the cutting block, check the presence of foreign bodies in the styler case and try to clean it with a small brush or cotton wool.

No matter how well it works in a summer cottage or a country house that we have acquired an electric trimmer for grass. Sooner or later, the time will come when we need to get a head.up.trimmer for replacement or prevention. I will immediately make a reservation to replace the fishing line with a trimmer head completely do not need to remove. As part of this article, I will tell you how to completely remove or replace the mowing head on the example of an electric trimmer for BlackDecker GL716 grass.

Battering trimmers options

Battery braids for grass are easy to use, they actively help clear the territory next to the house from the grass. Such devices contain batteries with an indicator for a charge. You can easily adjust the bar and handle.

  • without noise, as well as wires, you can take care of lawns;
  • ideal for amateur use;
  • has a small weight and holds the balance well.

The equipment is in a series, and the following includes the following.

Mower Cord won’t pull

  • Rod. It can be adjusted at any time. Ideal for those conditions when several people use the aggregate, and everyone can adapt it for themselves.
  • The handle has the shape of a circle and is easily configured. She has six positions.
  • The mowing unit is regulated. This can be done in four positions.
  • The edge can be cut vertically. In this case, the angle can be changed to 90 degrees.
remove, head, stihl, lawn, mower, cord

The most famous versions of the cos on batteries are spelled out below.

FSA 65

The length of the device is 154 cm. Current 5.5 a. The lightest of the rest of the mowers. This tool can be used in large spaces.

Removing and disassembling the engine

The engine hold 4 screws installed on the bottom of the chainsaw of the Stihl 180 chainsaw. To remove them, it is necessary to spin them, and then carefully remove the engine from the seat and the rubber pipe of the carburetor.

For disassembling the engine, 4 screws of the crankcase are spinning, and it is removed, then you can remove the crankshaft assembly with seals, bearings and piston rings.

Removing bearings and oil seals usually does not require additional tools, but if the bearings have been tuned to the shaft with an effort, then a special puller is needed to dismantle.

To remove the piston from the connecting rod, you need to remove the locking ring from the planting nest, using a thin screwdriver, then the piston finger is squeezed out from the opposite side, after which the piston is removed to the side.

How to remove the coil and replace the fishing line for the trimmer

The owners of the trimmers, mainly beginners, confuse, bordering on panic, when it becomes necessary to change the cutting tool or fishing line for a trimmer in a reel. Very often, when trying to unscrew the mowing head, users simply make it unusable, not suspecting that it is unscrewed in the opposite direction. So that this does not happen, if you need to replace the tool, it is recommended to familiarize yourself with the step.by.step instructions given below.

  • Before refueling the fishing line for the trimmer to the coil, drown out the engine of motorcycles or de.energize the ethletric trimmer for the grass to avoid injuries that may occur in case of accidental rotation of the cutting tool.
  • Unscrew the nozzle mounted on the gearbox shaft. To do this, the shaft must be fixed by combining holes on the puck and on the axis, and inserting a metal rod or screwdriver into them.
  • Unscrew the nozzle. You should know that the thread on the shaft is left. Therefore, to twist the coil of the trimmer for the grass should be right, that is, clockwise.
  • Disassemble the mowing head. Most often, the head cover is attached to the fixers. To remove it, you need to drown these latches into the case, pressing the edges of the lid. If your trimmer has a semi.automatic mowing head, which has a button from below, then disassembling the nozzle should be done carefully, since you can lose a spring that sometimes flies away when removing the cover.
  • Cut the required amount of fishing line. Usually its length is 5 meters. Use the cord of the diameter that is indicated in the instructions for the tool. It is not recommended to exceed the maximum diameter of the fishing line, since this will lead to increased load on the engine and greater consumption of gasoline.
  • Find the middle of the segment of the cord, folding it in half. You will get a loop.
  • Special grooves are cut out inside the coil (there may be holes). Insert the loop from the fishing line into this groove.
  • Wind a fishing line for a trimmer to a coil, turning it counterclockwise. You need to refuel the cord as evenly as possible, the turns should be laid without ceiling and with good tension. When the winding is finished, leave the free ends of the fishing line about 20 cm long and fix them in the grooves located on the sides of the coil.
  • Collect the braid head. Before you finally collect the nozzle, do not forget to insert a spring and washer (if it is available). Install the coil in the case, and prone the ends of the cord through the holes or eye.
  • Dress the lid and fix it with latches.
  • Screw the nozzle back to the gear shaft, also fixing it with a screwdriver. Tighten the coil of the trimmer for the grass will need to go to the left (against h. Arrows).

What can be used instead of fishing line

Many users of trimmers are wondering: how to replace the cord, by default used in this kind of devices? Unsafe experiments begin to carry out, installing metal or copper wire, metal cables or strings in a mowing head, as well as a regular fishing fishing line for a trimmer.

If you install a metal cable instead of fishing line, then a trimmer for grass turns into a dangerous device not only for the user, but also for others. This fact is explained by the fact that during the operation of the unit, the steel cable will be gradually shut up, its ends are gradually released, and small pieces of wire will fly in different directions at high speed.

And if you accidentally hook your or someone’s leg, working as an unit with a steel cable (wire), then a strong and deep section of the fabrics, and in some cases, amputation of the fingers are provided with you. The manufacturer is not in vain for these purposes, nylon uses, since it is quite light and durable, and when separating he does not fly away and cannot cause injury.

It is possible to use a fishing fishing line for a trimmer in a trimmer instead of a standard one, of course, but this will add unnecessary trouble, because it quickly wears out, breaks, mows slowly and does not fit for cutting hard grass. In addition, during the work, a lot of time is lost to replace the broken tool more than once.

In practice, the installation of a regular fishing line is justified if the user is going to mow grass near the fence, especially if he is from a rabid grid. In this case, in order to protect the standard and sometimes expensive cord from wear, it changes to a fishing fishing line for a trimmer, which is not a pity. Usually, in order to change the cord to a fishing line for a trimmer, it must be selected the greatest thickness-2-3 mm.

What is a trimmer for grass

Under the trimmer suggest motorcycles or electrocos. This is practically one of the variety of lawn mowers (manual mower) that are created for mowing the grass. This is a modern braid braid. At first, they were developed to carry out agricultural work, but the main use of trimmers was specifically the mowing of lawns. For the first time, the thought to make a trimmer for the grass occurred to the South American businessman J. Bollas. Passing by car through an automatic car wash, he saw that the principle of spinning brushes can be used for beveling agricultural crops.

After that, he collected a simple trimmer for grass from a tin can (as a coil) and a fishing line, reached into the holes drilled in it. He installed the resulting design on a pole, on which a moped engine was previously mounted for earlier. The device is a mowing not only wheat, and grass. The device of the coil of the trimmer for the grass and it leaves the coil. a fishing line for a trimmer does not why stalls. Realizing that on the sale of braids for the grass he will earn huge funds, the businessman improved his product and gave him the title of “Excellent weeds”. A feature of the invention was the possibility of a bevel of grass around the trees. the forest perfectly cut off the grass, but did not injure the bark.

The main purpose of such a tool was the bevel of grass in small areas in places where traditional wheeled technique cannot be applied:

  • in the presence of a huge number of shrubs;
  • in gardens with a huge number of trees;
  • near fences and fences;
  • If the site has an uneven relief.

All trimmers for grass have a bar in their own composition. the main constructive element. A gasoline or electronic engine is attached to the rod from the 1st end, and a coil with a fishing line is put on the other-the main working element. With all this, the type of transmission can be at least any. it is limited only by the ability of the manufacturer and commercial parameters.

Elimination of the malfunctions of the carburetor

The problems of the carburetor, as a rule, consist in clogging nozzles and other elements. For repair, you need to disassemble the knot and clean it. Perhaps an additional adjustment of the carburetor will be required.

You can clean nozzles and fuel channels using a pump or compressor. For adjustment, 3 screws are usually used:

We recommend reading:

Trimmer for the grass gasoline: choosing advice, overview of the best models, types and options for using trimmers (120 photos)

  • Completely tighten the screws h and l.
  • Unscrew the screws h and l by 1 turnover, accuracy plays a significant role.
  • Run the lawn mower and leave in working condition for 10 minutes to warm up the engine.
  • When the engine warms up, unscrew the gas to the full.
  • Let go of the gas handle and configure idle (LA). Twist the screw after the rotation of the working body so that it stops.

Preparation of a trimmer coil for grass for winding

Initially, as a rule, the coil is installed to the head of the device itself. The coil consists of two parts. this is a lid and a spring.

You can buy the highest quality electric ships, trimmers for grass and additional components here in the online store “Garden mechanisms” for the lowest for the selected goods from the category. The directory of the link presents the most popular, demanded electric mowers from world brands such as Bosch, Makita, Patriot, Gardena, Hyundai and others.

  • Whatever company you have a trimmer for the grass for preparation are the same for all types. Disassemble the device, or rather, remove the coil from the head of the trimmer for the grass. To do this, we click on the fixers located on the sides of the head of the head, and turn the head clockwise.
  • In order to open the mowing head without problems, click on the side latches, if you do not succeed with your hands, use a flat screwdriver to help you. We take out the coil from the head.
  • In order to correctly choose a fishing line for a trimmer for your equipment, digital designations must be applied on the inside of the coil, which indicate the thickness and type of permissible fishing line. All designations are indicated, as a rule, in millimeters.
  • If you have not found any numbers, then the maximum permissible diameter of the fishing line can be determined by a through hole for lingering the fishing line. The fishing line for the trimmer should go forward and backwardly.

The process of winding the fishing line on the reel

After all the preparatory actions, we need to correctly decide how exactly a fishing line for a trimmer, by turning the cover or in the opposite direction will be washed on your device.

So, let’s say, you figured out how quickly, and most importantly, to correct the fishing line for the trimmer to the trimmer coil for the STIHL grass. All that you have left is to insert everything into the grooves and fix the main cover on the device. Then you can press the bobbin itself and make movements counterclockwise until you feel the emphasis. If you do not feel the emphasis, then most likely you were not corrected for a trimmer for a trimmer and you will have to start everything from scratch.

A couple of tips

If the fishing line for the trimmer was wound correctly, then when pressing the button button, automatic stretching of the cutting element should occur. A trimmer fishing line for your mowing device is one of the most important elements, without which a trimmer for grass can lose all its functional abilities. We can say that a fishing line for a trimmer (cutting element) is the heart of your mowing. Therefore, when buying a fishing line, primarily devote to its quality. When purchasing a fishing line for a trimmer of a particular company, be sure to compare it with the quality of the old fishing line.

What can be used instead of fishing line

Most mowers are interested in others or sellers in specialized stores about what can still be used (replaced) except for the fishing line. Many of them begin to experiment and use unsafe methods, installing different cutting elements on their trimmer for grass, including copper wire, metal, some manage to use strings from guitars and even cables, and someone is completely a fishing line for fishing networks.

  • If instead of a special cutting element, say fishing line, install a metal cable, then your trimmer for grass can “turn” into a real dangerous weapon not only for you and your eyes, but also for all people around you nearby. This is due to the fact that during the work of the trimmer for the grass, the steel cable will constantly work, which will lead to confusion, and its small pieces can fly to all sides with a huge speed.
  • The same can happen if a copper wire is used instead of a steel cable, but in this case, the pieces of separation from copper wire will be slightly larger and may give you an even greater injury. And if God forbid, accidentally catch such a cutting element by the leg, then after that 100% is guaranteed a deep cut of soft tissues, and in some cases, all this can lead to amputation of small limbs (fingers) of the legs and even hands. Therefore, our advice to you, do not use any other cutting elements, except for fishing line, for your own safety and others.

What else is important to know

Now that you know how to disassemble the coil of the trimmer for the grass and season the fishing line for the trimmer, we will share several more tips for the operation of your benzo- or electric ships.

A worn or damaged head of a trimmer for grass at high speeds may fail and even cause serious injuries. Examine Motokos before and after work in order to evaluate its condition. Constantly check the integrity and serviceability of all components of the mechanism.

Before winding a fishing line for a trimmer to the coil of a trimmer for grass, it is worth putting it for a day or for a whole day in water. The nylon thread is hygroscopic, that is, it absorbs the liquid. This makes a mowing string softer and elastic. Firstly, it will be wound on the drum more tightly. But the main thing is that in the process of working a fishing line for a trimmer will not be the same brittle as if it were dry. This will significantly increase the operating time of one shift set.

Before starting work, be sure to check that cutting strings on both sides are the same length. At the beginning of the mowing, the cutting ends are shortened to the required size to the feet installed on the protective casing.