How To Remove The Trimmer Coil

Specifications

The main technical characteristics of the trimmer are:

  • power;
  • equipment weight;
  • type of power supply (from the network or using a battery);
  • engine location (top or bottom);
  • type of cutting element;
  • rod type.

All this must be taken into account, buy this or that device.

Trimmer head: types and description

One of the common devices for cutting grass is the trimmer. It is very easy to operate and maintain. That is why it has become popular among the population. Its significant advantage is its low weight. Even a child can handle such equipment.

What it is?

The trimmer consists of a cutting element, a bar, a motor and a handle with a control mechanism.

Briggs & Stratton Replace Small Engine Ignition Coil #796964

Cutting tool

To make the cutting process easy, you need to choose the right cutting element.

Mowing head for trimmer

It is a special assembled coil with a cord inside.

The trimmer head is classified according to the line feed method:

  • Manual. In this case, the name speaks for itself, that is, the line is fed mechanically. To make the cord even longer, you must stop the trimmer and manually pull the ends.
  • Semi-automatic. If you want to replace the cord, the trimmer head needs to touch the ground. At the same time, a special button is pressed and the anchor mechanism opens. Further, the lengthening of the cord occurs due to the centrifugal force. The main feature is that the procedure takes place when the trimmer is on.
  • Automatic. To make the cord elongate, the engine speed is reduced. Further, when increasing them, the line is fed automatically.

From the above, it follows that the manual mowing head for the trimmer is inconvenient.

How to choose the right one?

Before purchasing this equipment, you need to understand for what purpose it will be used. For a large area with a flat lawn, it is better to purchase a light model with low power. If you need to equip a summer cottage, then you need to choose a more powerful model.

Classification by filling method

The trimmer head can have several ways of threading the line:

  • Quick Chargers. The new cord is wound without disassembling the coil, that is, there is no need to remove it from the device. The end of the new element is pushed into the spool and then wound a certain number of times. When a specific value is reached, the cord is cut. This type of trimmer head is available from Shindaiwa and Speed-Freed.
  • Collapsible. Here the name itself speaks for itself. To replace a new cord, you need to remove the spool from the equipment, then unwind the old line and wind a new one.

Instructions

In order to change the line, you need to remove the old one (if it was).

The reel is the part of the trimmer structure that is located inside the mower head, drum or bobbin. Heads may vary depending on the manufacturer. But this article only covers Patriot, although their mechanism is used by many other companies.

Now you need to understand how to properly remove the head from the trimmer and how to pull the drum out of it.

Instructions on how to unscrew the manual head on the trimmer are described below.

  • First of all, you need to clean the head from dirt and adhering grass, if it is dirty. To do this, lift the mower head up and, grasping the casing, remove the special protective cover on the drum.
  • The next step is to remove the spool from the drum. The reel can be easily removed even with one hand, because it is not fixed in any way inside the drum.
  • The drum itself is bolted to the trimmer. This bolt must be unscrewed, after which you can easily pull out the drum. To do this carefully, you should support the drum with the spool, while unscrewing the screw counterclockwise.
  • Now you can pull the coil out. As mentioned above, it is not secured by anything, except for a hook with a metal shaft, so it does not need to be pulled out with force. Carefully, in a circular motion, pull the spool out of the drum.
  • Now it remains to remove the old fishing line and follow the following instructions.

Installation of the spool and drum in their original place is performed according to the reverse algorithm.

Before threading the line, make sure you have purchased the correct thread for the trimmer. In the event that the thread does not fit, the fuel or energy consumption increases, as well as the load on the engine of the lawn mowers.

In order to replace the thread itself directly, you need to prepare a piece of thread of the required size. Most often, this requires about 4 m of line. The specific figure will depend on the parameters of the thread, for example, its thickness, as well as on the parameters of the coil itself. If you cannot accurately determine the length, you can do the following: insert and wind the thread until the coil is fully charged (the line level will be compared with the protrusions on the sides of the coil). It is necessary to ensure that the line sits evenly in the reel.

Do not forget that thick thread will be shorter than thin thread.

The instructions for threading the line into the spool are described below.

  • The prepared thread must be taken and folded in half. It should be ensured that one edge is 0.1-0.15 m longer than the other.
  • Now you need to take the ends in different hands. The one that is smaller must be pulled up to the larger one so that it becomes 2 times shorter. When bending, maintain an offset of 0.15m.
  • Locate the slot inside the coil baffle. Carefully pass the loop you made earlier into this slot.
  • To continue working, it is necessary to determine the direction of winding the thread in the bobbin. To do this, it is enough to inspect the coil. there should be an arrow on it.
  • If the arrow-pointer could not be found, then it is quite possible that there is a written designation. An example is shown in the photo below. It is necessary to inspect the coil head. There is a direction indicator on it. However, this is the direction of movement of the coil. To get the direction of winding, you need to wind in the opposite direction.
  • Now you need to load the spool with line. It is worth noting that there are special guide grooves inside the coil. Follow these grooves when winding the thread, otherwise the trimmer may be damaged. At this stage, you need to charge the coil very carefully.
  • When the user winds up almost the entire thread, take the short end (do not forget about the 0.15m protrusion) and pull it into the hole located in the wall of the reel. Now you need to repeat this action in the same way with the other end (on the other side).
  • Place the reel itself in the head of the reel, before passing the line through the holes inside the drum.
  • Now is the time to put the drum back in place. After that, you need to take the ends of the line with both hands and pull them to the sides. Then you need to put the lid back on (here you can safely make efforts until a characteristic click is heard).
  • It remains to do the “cosmetic work”. We need to see if the thread is too long. You can start the trimmer and check in practice if everything is comfortable. If the thread comes out a little long, you can cut it with scissors.

How to wind the line onto the Patriot trimmer reel?

Almost every beginner when using a trimmer faces the problem of changing the line. While changing your line is easy, you need to learn how to do it right. Changing the fishing line with proper skill will take no more than five minutes. you just have to constantly practice it. This article will look at changing line using Patriot trimmers as an example.

Frequent mistakes

Although winding the line is a very simple task, many beginners can wind the line incorrectly. Below are the most common mistakes.

  • Many people, when measuring a thread, think that 4 m is a lot. Because of this, people often measure less and, accordingly, they do not have enough line. Do not be afraid to measure a lot, because you can always cut off the excess.
  • In a hurry, some people do not follow the threading grooves inside the spool and wind the thread randomly. This will cause the line to come out of the reel and may even cripple.
  • For winding, use only the appropriate line. This mistake is the most common one. You need to monitor not only the thickness and volume of the line, but also its type. You should not use the first line that comes across for wrapping, which will not meet the goals. For example, you do not need to use a thread on young grass if you need to mow dead wood.
  • Do not turn on the device until fully wound and collected. Although this is obvious, some people do this in order to check if everything is done correctly.
  • In no case should you confuse the direction of refueling, as this will overload the engine, and it will soon come out of working condition.

It is quite common for beginners to make mistakes, so you need to follow the tips given in this article.

See below for how to replace the line on the Patriot trimmer.

What is a trimmer coil?

One of the main elements of the trimmer is the coil, which is installed on a special attachment. This design contains a drum where the line is placed for cutting grass.

Externally, the trimmer spool is protected by a cover that protects the user from injury if the cutting thread breaks. Most often, the casing slams shut.

To open the drum and remove the fishing line, it is enough to squeeze the special clamps, which can be done with a screwdriver. This can cause the trimmer spool to shoot out the inner harness as the spring unfolds. Therefore, care must be taken when handling the drum.

Trimmer reel. how to replace worn out line?

Lawn maintenance is one of the problems facing the owners of private suburban housing. The use of an electric scythe, commonly known as a trimmer, allows you to solve the problem. The tool is much easier to operate than a conventional scythe.

Removal of grass from the site occurs due to the movement of a special fishing line. In some models, its rotation speed is about 8000 rpm. However, over time, the coil for an electric trimmer runs out of its own resource, and the line becomes unusable. Therefore, it is necessary to periodically replace the cutting element.

Let’s see what a trimmer is, what types of devices are available to the consumer and how to refuel the trimmer coil.

How to choose a replacement line?

The trimmer reel can be fitted with a variety of line diameters from 1.6mm to 3.2mm cutting thread. Users often prefer a medium diameter line of about 2 mm.

If you do not know exactly what thickness is required for the existing trimmer model, just look in the technical data sheet of the device. Usually this parameter is specified by the manufacturer.

It should be noted that the “string” for cutting grass is absolutely not suitable for removing thick weeds or bushes. To avoid breaking and refilling the coil, just use a trimmer with a metal knife attachment.

Trimmer types

  • Devices with a motor located at the base. The power of individual models reaches about 500 watts. Usually, such designs do not provide the ability to adjust the length of the holder. At the same time, the center of gravity of such electric scythes is more balanced, which increases the ease of use.
  • Top-engine attachments. up to 800 watts. As a cutting element, both a trimmer coil and special knives can act. Shaft length adjustment possible.

In general, both types of trimmers are fairly compact, easy-to-use tools that produce relatively little noise. The only drawback of electrical models is the limited length of the network wire, which imposes restrictions on free movement around the site. However, the inconvenience is solved by connecting the unit to a portable extension cord.

How to fill the line?

The procedure for removing the cutting thread from the drum and replacing it is quite simple. To begin with, the coil is removed from the mount. Next, the drum cover gently opens, the remnants of the old torn fishing line are removed.

The next step is to lay the new cutting string. To determine the desired direction when winding, you need to look at the pointer that is on the drum of the device.

At the end, a small piece of line is left, which will be used directly when mowing the grass. The coil is secured with a clip and the procedure is complete. It is enough to turn on the trimmer. and you can get to work.

How to wind the line onto the trimmer spool. We master it step by step

To find out how to wind the line on the trimmer reel, you need to carefully examine the mowing part of the device or look in the tool passport. The fact is that, depending on the refueling method, trimmer coils are quick-charging and collapsible. For the former, everything is very simple. You don’t have to remove or disassemble anything, you just need to find holes for the fishing line, thread it through both ears and wind the required number of turns, and cut off the excess.

  • First, make sure the trimmer is off, and if you are using a lawn mower, be sure to unscrew the candle.
  • Remove the mowing head from the trimmer and disassemble it. To do this, press all the way on the latches located on the head body and remove the cover.
  • Cut off the required amount of fishing line, and make the ends sharp. It will make the job easier.
  • Place one end of the line in a special clip located in the center of the reel.
  • Wind the string in the direction of the arrow indicated on the cap, while firmly holding the string with your finger.
  • Leave a 12-15 cm free end and attach it to the slot on the spool.
  • If your trimmer has a two-section mowing wheel, repeat the last 4 steps. At the same time, wind the line into the free section. And fasten the end on the other side of the coil.
  • Return the structure to the mowing head and pull out the free ends of the line through the special slots.
  • Close the head cover and assemble the trimmer. Your braid is ready to go again.

Choosing a fishing line

Look closely at the cross-section of the line, it can be round or with ribs (square, “star”). The cut thread is good for harder grass and weeds. However, if the grass is too stiff, it is better to use a lawn mower with knives (milling cutter).

Some types of fishing line have rather sharp edges, so in order to avoid injury, it is worthwhile to refuel the reel with gloves.

Types of trimmer heads

Scythe heads can also have a different device: with automatic line feed, semi-automatic or manual. In the first case, in order to lengthen the working ends of the thread, it is necessary to slightly reduce the speed. And when you add them again, the line will come out automatically. For semi-automatic devices, you need to click on a special button located below. It is not necessary to turn off the trimmer. Simply hitting the ground with a scythe. The most inconvenient to work with are hand-feed trimmers. To lengthen its working ends, the tool must be turned off and the operation must be performed manually.

There is also a reel with a trimmer line:

  • single-string. suitable only for cosmetic trimming of the local area;
  • two-string. used for more serious work to clean the area from grass.
  • A ring needs to be cut out of thin but durable plastic, and its inner diameter should be equal to the thickness of the core on which the fishing line is wound, and the outer one. to the diameter of the reel.
  • On the inside of the ring, you need to make a small notch through which the thread will be threaded.
  • Next, the ring is cut, put on the coil. And the place of the cut is glued together with tape or soldered with a hot knife. That’s all. now each end of the line can be wound on its own part of the reel.

Recharge the lawn mower. How to wind the line onto the trimmer spool

Sooner or later, every owner of a personal plot or a lawn near the house thinks about the problem of cleaning the grass. To cope with this task, today’s summer residents are helped by a manual lawn mower or trimmer. The working part of such a tool is a rotating reel, which cuts off unnecessary grass with a fishing line. Everything seems to be simple, but not every amateur gardener knows how to wind the line on the trimmer reel. Oddly enough, manufacturers often forget to raise this issue in the operating instructions.

Trimmers are different

To understand how to wind the line on the trimmer reel, you first need to figure out the tool itself: what kind of company it is, how it works, how it works and what parts will be needed for repair. To begin with, trimmers are divided into gasoline and electric, and they can have a knife and fishing line as cutting elements. There are 3 trimmer modifications:

  • with fishing line and knives with 2–4 blades;
  • only with knives;
  • only with line.

Of course, craftsmen can improve anything and sometimes they fill the trimmers with, for example, metal wire or fishing line. But doing this is absolutely not worth it. you can seriously injure yourself or others.

As you already understood, threading the line into the trimmer spool. it’s a simple matter, it is quite within the power of every novice summer resident. You just need to understand how exactly your instrument is arranged, and do the work carefully, without rushing.

Trimmer coil device

Trimmer mowing heads come in a variety of designs, both simple and complex. The picture below shows an exploded view of the Husqvarna (Husqvarna) semi-automatic trimmer head.

This type of head is found on most lawn mowers and trimmers such as Stihl (Stihl), Patriot (Patriot), Champion (Champion), Bosch (Bosch), Huter (Huter) and others. The device of the mowing head is quite simple. It includes the following details:

  • mowing head base;
  • button for semi-automatic cord feed;
  • bobbin (spool) into which the line is tucked;
  • spring;
  • eyes. through them the line comes out;
  • trimmer head cover;
  • line (cord).

There are also simpler trim heads shown in the following photo.

All these attachments do not allow you to change the length of the line in a semi-automatic mode (after pressing a button). If the cord breaks, you have to stop the mower and change it manually.

Line does not extend automatically

If the line does not lengthen when you lightly hit the trimmer button on the ground, then the reasons for this may be the following.

Option 1. a bite has occurred, i.e. clamping the cord between turns. This problem usually appears if the user has been winding the line on the reel unevenly, with intersecting turns, or winding it with insufficient tension. In the latter case, when the mowing head rotates at high speeds under the influence of centrifugal force, the cord begins to tighten, as a result of which inter-turn clamping of the fishing line is possible. To fix the problem, you will have to disassemble the coil on the trimmer and rewind the cord correctly, that is, in even turns with good tension.

Option 2. too short ends protrude from the head. The line may not come out when hitting the ground if the ends sticking out of the head are not long enough (short). In this case, the centrifugal force is not enough to stretch the line. Therefore, it is required to stop the unit (turn off the engine or disconnect the trimmer from the mains) and pull out the line manually, after pressing the button.

Option 3. the line is brazed inside the mowing head. This causes the coil to lock and not spin when the button is pressed. Basically, this happens for several reasons: poor quality of the cord, overheating of the coil during prolonged operation of the unit, hitting the line against hard objects.

  • In the first case, third-party cord can be made of low-quality and low-melting materials that cannot withstand mechanical and thermal stress. Therefore, you should give preference to “branded” lines.
  • But, if you nevertheless purchased a fishing line of unknown quality, and it is often soldered during operation, then you can follow the example of some users who, after filling the cord into the reel, wet it with either silicone grease (from a can) or mineral oil. This procedure greatly reduces the likelihood of soldering the turns of the fishing line together.
  • Also, the line can be soldered if it hits a hard object (stone, fence, dry branch, etc.) during mowing. As a result, it stretches slightly and is pulled back into the head at high speed. From friction, the cord heats up, and its turns stick together. The only thing that can be done to eliminate this malfunction is to open the trimmer spool and rewind the line.

DIY trimmer coil repair

A petrol or electric trimmer is the only solution for mowing grass in hard-to-reach places that a wheeled lawnmower cannot handle. As a cutting tool in trimmers, metal knives or special fishing line are used, which is tucked into the trimmer coil. But, unfortunately, the trimmer heads become unusable over time during operation. Some malfunctions can be eliminated by hand, and some require a complete replacement of the mowing head.

How to remove the spool and replace the line

Trimmer owners, mostly beginners, find themselves in confusion, bordering on panic, when they need to change the cutting tool or line in the reel. Very often, when trying to unscrew the mowing head, users simply render it unusable, not suspecting that it is unscrewing in the opposite direction. To prevent this from happening, if you need to replace the tool, we recommend that you read the step-by-step instructions below.

  • Stop the mowers engine or power off the trimmer before placing the line into the spool to avoid injury from accidental starting rotation of the cutting tool.
  • Unscrew the nozzle attached to the gearbox shaft. To do this, the shaft must be fixed by aligning the holes on the washer and on the axle, and inserting a metal rod or screwdriver into them.
  • Unscrew the nozzle. You should be aware that the thread on the shaft is left-handed. Therefore, turn the trimmer coil to the right, that is, clockwise.
  • Disassemble the mowing head. Most often, the head cover is attached to the clips. To remove it, you will need to sink these latches into the case, squeezing the edges of the cover. If your trimmer has a semi-automatic mowing head with a button on the bottom, then disassembling the attachment should be done carefully, because you can lose the spring, which sometimes flies out when the cover is removed.
  • Cut off the required amount of line. Usually its length is 5 meters. Use a cord of the same diameter as indicated in the instructions for the tool. It is not recommended to exceed the maximum line diameter as this will result in increased engine load and higher gas mileage.
  • Find the midpoint of the line by folding it in half. You will have a loop.
  • Special grooves are cut inside the coil (there may be holes). Insert a loop of line into this groove.
  • Wind the line around the spool by turning it counterclockwise. It is necessary to fill in the cord as evenly as possible, the turns should lie down without overlap and with good tension. When winding is complete, leave free ends of the line about 20 cm long and fix them in the grooves on the sides of the reel.
  • Assemble the mowing head. Remember to insert the spring and washer (if equipped) before final assembly of the accessory. Place the spool in the body and thread the ends of the cord through the holes or lugs.
  • Put on the cover and secure it with the latches.
  • Screw the adapter back onto the gearbox shaft, also securing it with a screwdriver. You will need to twist the trimmer coil to the left (counter-clockwise).

The cord lengthens spontaneously

There are times when the trimmer user notices a very fast line flow. However, he never hit the ground with a button to lengthen the line. The reason for the fact that the line spontaneously lengthens, being cut on a special knife on the casing of the device, may be the absence of a spring in the mowing head. Often novice users of mowers, trying to load the line into the reel, forget to install the pressure spring in the head, or even lose it when opening the cover, and in the future, do not even suspect of its existence.

Also, the line can be lengthened without using a button if the spring is loose. If checking the spring has confirmed this fact, then several washers must be placed under it in order to enhance its clamping properties.

Major coil faults

Trimmer users and lawn mowers often face a problem with the semi-automatic mowing head. Coil malfunctions can be as follows:

  • the line does not lengthen automatically;
  • the cord spontaneously comes out of the reel.

Is it possible to make a coil for a trimmer with your own hands

  • Take a piece of plywood or PCB and draw a circle about 14 cm in diameter on it.
  • Cut the disc with a jigsaw or metal hacksaw.
  • Drill a hole in the center of the disc that matches the diameter of the gearbox shaft. Do not forget to put a washer on it before installing the disc on the shaft.
  • Small corners can be screwed on the edges of the disc or 1-2 holes can be made on opposite sides. They will serve for refueling the fishing line in them.
  • Several screws can be screwed into the plywood to secure the line.

This homemade mowing head is secured to the shaft with a nut. It will not work to tighten or unscrew the nut without fixing the shaft. To replace the cord, it will be enough to loosen the screws, insert a piece of line of the required length and press it again.

Also, the mowing attachment for attaching the fishing line to it can be made of metal sheet. How to do this can be understood from the following video.

Self-made bobbin

Quite often, the trimmer is operated away from places where you can buy spare parts for the mowing head if it breaks down. In this case, instead of a broken mechanism, you can install a self-made coil, simple in design. To do this, you need a sheet of plywood (textolite, metal, etc.), eyelets, screws or screws. The process includes several stages.

  • A disc is cut out of the plywood sheet, the diameter corresponding to the failed spool.
  • In the center of the disc, a hole is drilled that coincides in diameter with the trimmer shaft.
  • On opposite sides of the disc, small eyes are attached, which will serve for threading the fishing line.
  • The fishing line is passed through the eyelets and fixed with ordinary screws or screws. Coil ready to work.
  • Clamping the manufactured bobbin between two washers, it is attached to the trimmer shaft with a nut.
  • Important! It must be remembered that it will not be possible to tighten or unscrew the nut without rigid fixation of the shaft.

    To replace the line on a homemade reel, you will have to loosen the fixing screws, insert a new piece of string and tighten the fasteners again. It is not necessary to remove the coil from the trimmer shaft in this case, however, it is necessary to exclude the possibility of spontaneous starting of the motor.

    So, above, the methods for repairing the string head were described step by step with pictures. As you can see, the process is not complicated. And most of the breakdowns are directly related to inaccurate threading of the string and its unsatisfactory quality. You can clearly see all the stages of the process in the video.

    How to remove the spool from the trimmer and remove the line

    Initially, remove the line from the trimmer spool before inserting it into the trimmer spool. A reel or aiming device is a device that sits inside the mowing head, bobbin or drum. There are different types of heads (depending on the manufacturers), but the principle of replacing the line on the reel is the same for everyone. First of all, we will figure out how to remove the head from the tool, as well as how to get the drum and fishing line out of it.

    It is interesting!
    The tooling can be changed directly on the tool, but if you are doing this for the first time, it is still recommended to remove the head and study the detailed winding process. After the technology has been mastered, you can perform replacement work on a trimmer lawn mower or lawn mower.
    The instruction on how to unscrew the manual head on the trimmer is as follows:

      Turn the tool upside down and, if necessary, clean it from dirt. With two fingers of one hand, grip the cover latches (on the mowing head), which are symmetrically positioned to each other. After lightly pressing them inward, remove the protective cover from the drum

    Next, remove the line spool from the drum shaft. It is mounted on a shaft without fasteners, therefore it can be dismantled with one hand

    The main part of the drum is fixed with a screw, which must be unscrewed with a screwdriver with an appropriate tip or bit

    To unscrew, hold the drum base with one hand, and unscrew it counterclockwise with a screwdriver with the other

    After that, you can start dismantling. To do this, you do not need to pull it with all your strength, but slightly shaking it to the sides, slowly disengage it from the metal shaft on which the drum is seated

    When reinstalling, fit the head into the square slots

    This process is not difficult, and as you know, there is no need to dismantle the entire head if you know how the replacement is performed. When dismantling, consider the following nuances:

    • Periodic removal of the head is recommended to prevent corrosion of the threaded connection. If you never unscrew the screw, then if necessary, it will be difficult and even impossible to do this.
    • If the screw has a four-sided bore of the head, then for unscrewing it is necessary to select a screwdriver or bits of a suitable size in order to exclude licking of the edges on the head
    • When assembling the unit, treat the threaded seat with lubricants, such as grease or machine oil.
    • If the edges on the screw are licked, then you can use special clamping pliers to unscrew it.
    • There are drums that do not require preliminary disassembly. To dismantle them, grab it and rotate in the opposite direction of the clockwise direction

    Knowing how to disassemble the drum, you should continue to figure out how to replace the trimmer line. The video below shows a detailed process on how to open the trimmer coil and disassemble it.

    Cutting unit attachment

    The cutter block is the heart of your Philips styler. It has short and sharp edges and is used to quickly and accurately trim hair to length.

    To remove the cutting unit from the styler body, check for the release button on the styler body. If present, press the button to remove the cutting unit.

    If your styler does not have a release button, place your finger under the teeth of the cutting unit and slide it out of the appliance. To re-install, insert the bottom of the cutting unit into the styler body, and then push in the barbed section until it clicks. Don’t overdo it; this could damage the instrument.

    If you are unable to install the cutting unit, check for foreign bodies in the styler body and try cleaning it with a small brush or cotton swab.

    No matter how well the electric trimmer we purchased works in a summer cottage or a country house. sooner or later the time will come when we need to remove the trimmer head for replacement or prevention. I will make a reservation right away that you do not need to completely remove the trimmer head to replace the fishing line. In this article I will tell you how to completely remove or replace the cutting head using the example of the BlackDecker GL716 electric trimmer.

    Method 1. how to properly wind the line or put it on a reel and choose the required length

    To implement this method, you will need to first prepare a fishing line of the required length (usually up to 4 meters). It all depends on the thickness of the equipment used, as well as the design of the coil. There is an easy way to find out the amount of line you need to refuel to charge the reel. To do this, wind the equipment inside the coil until it is aligned with the side projections. In this case, the equipment should not go beyond these extreme protrusions.

    The thicker the rig used, the shorter its length will be needed and vice versa, the thinner, the longer the segment will be needed.

    The instruction on how to properly tuck the equipment into the trimmer or lawn mowers is as follows:

      To begin with, a piece of fishing line that was prepared to be installed in a reel must be folded in half. In this case, one edge should protrude more than the second by 10-15 cm

    After that, take the second end from the other side, and fold it in half. Move to it so that the measured protrusion of 15 cm is preserved

    In the inner baffle of the coil there is a slot into which the resulting loop should be inserted. The cut in the wall is shown in the photo below.

    Next, we find out the direction of winding the line. If you wind the rig in the wrong direction, then it will not function correctly, and you will need to redo the work. To insert the line and wind it in the correct direction, inspect the surface of the spool. The direction of winding should be indicated on it (in 99% of cases, this direction is indicated). What the direction indicator on the coil looks like is shown in the photo below.

    This arrow-shaped pointer can also have the designation, as in the example above “WIND LINE”, which means the direction of winding. If the pointer is missing on the coil, then you need to look at the head. There is a direction of its rotation on the head, and in order to properly wind the line, wind it on the drum in the opposite direction to the indication of the arrow indicator. So, if the arrow is on the tip, then you need to wind in the indicated direction, and if it is not there, then you should wind against the direction of the arrow on the surface of the head

    Having decided on the direction of rotation, you should start winding. Each end should be guided in its own groove. If there is no separator, then the equipment must be laid in the appropriate distribution order.

    When almost all the fishing line is wound on a reel, you will need to do the following. place a short part in the hole of the side wall of the aiming, the protrusion of which should be up to 10-15 cm, and then similarly do the procedure with the other end, placing it in the hole on the parallel side

    We insert the coil into the head, first passing the ends of the line into the holes of the drum

    We put the drum in place and, pulling the ends of the line, remove them from engagement with the temporary clamps in the wall of the reel. After that, you can put on the cover until the latch engages.

  • This completes the process of how to replace the fishing line on the trimmer, and if necessary, you can only trim the ends (if their length does not suit), and install the assembled drum on the tool
  • With how to put the drum in place, no difficulties arise. There is a second way, how to charge the mowing equipment in the lawn mower. What is the difference, and how is the second method of threading the line on the reel of lawn mowers carried out, we will find out in detail.

    Learning to properly wind the line on the trimmer reel and lawn mowers installation instructions

    A petrol or electric trimmer is an irreplaceable assistant in the arsenal of a modern summer resident or owner of his own home.

    Thanks to these garden tools, even a large garden plot can be mowed with ease. After purchasing this tool and performing several mows, many people think about how to properly wind the line on the trimmer spool. For an inexperienced user, the first operation to replace it will seem problematic and time-consuming, since the developers often do not fully reflect the instructions for replacing the fishing line in the operating manual.

    How does a line head work on a lawn mower why you need to know how it works

    Depending on the manufacturer, the heads differ structurally not only externally, but also internally. Most drums have a pressure spring inside (semi-automatic and automatic). Above is an instruction on how to disassemble the trimmer head without a spring, i.e. on the head of the manual type. The principle of dismantling a semi-automatic head with a spring inside is almost identical to the instructions described above.

    The principle of operation of the semi-automatic trimmer coil is as follows:

    • Inside the head there is a coil, which is fitted on the slots, which prevent its free movement.
    • A spring acts on the coil, which presses it against the slots in the cover structure
    • A fishing line is wound on the tip, the length of which depends on the tool itself. Usually this length is between 1 and 4 meters
    • During the performance of work, if it is necessary to increase the length of the line, the protruding part of the drum is pressed, whereby it disengages from the splines. In this case, the line is unwound from the drum, increasing in length
    • After releasing the required amount of fishing line, release the pressure and continue cutting the grass.

    The advantage of a tool with a fishing line is that this consumable does not require sharpening, compared to metal discs. In addition, if a stone or a tree comes across on the way, the line simply breaks off, without negatively affecting the gearbox and engine of the tool, as is the case with metal cutting discs.

    Knowing the design and device of the types of mowing or trimmer heads, it is necessary to go on to consider the process of threading the line into the trimmer spool. After all, it is this moment that causes difficulties for most owners of special tools.

    remove, trimmer, coil

    Which line to choose to refuel the lawn mower

    The thickness of the polyethylene thread depends on the model of equipment and varies from 1.2 to 4 mm. She may be:

    • with a round cross-section. this is the most durable material for mowing grassy plants;
    • with a curly section. used for mowing soft plants;
    • twisted. used for thin grass;
    • professional type, not suitable for all models of equipment.

    To change the line on a lawn mower, you need to purchase a cutting thread that will be ideal for the type of mower.

    Criterias of choice

    You can soak the thread in a bowl of water for a few minutes to increase elasticity and strength.

    Step-by-step instructions on how to wind the trimmer reel and lawn mowers

    In order not to be mistaken with the choice of a suitable fishing line for your tool, you should first disassemble the head and look at the side wall of the reel. This information is usually presented on a tip, which will not allow you to make mistakes with the use of the appropriate equipment.

    If there is information on the spool about the diameter of the line you can fill in, then this information can be clarified in the instructions. Having decided on the thickness or diameter of the rig, it remains to figure out how to charge it. There are two ways to do this, but not all of them are applicable. We will consider both methods in detail, and depending on which models of lawn mowers and trimmers you use, you decide on your own which option is suitable.

    It is interesting!
    The principle of how to wind the line to guide lawn mowers is appropriate not only for autonomous gasoline units, but also for electric trimmers.

    Method 2. how to properly put the line on the reel of lawn mowers with photo description and video

    The second method differs from the first in that it is not a single piece of equipment that is charged into the coil, but segments from two parts. This method is used by manufacturers, and it is also suitable for those who have leftover material. The principle of how to insert two lengths of line into the mowing line is the same with the first method, and to make sure of this, below are detailed instructions:

    • There are two equal length pieces of material that you can use.
    • One piece is taken, and the edge is bent in the form of a clamping bracket or hook, with which the fishing line will be secured
    • Inside the coil there are holes in the form of a bracket for fixing, which are there for a reason. If they are not there, then the second option will not work. The appearance of these brackets is shown in the photo below. Each bracket is in its own half
    • The brace of the fishing line should be hooked on the bracket, and wind it in observing the direction of the arrow
    • The rig is wound until a 10-15 cm segment remains, which is fixed in the corresponding hole on the side of the guide
    • Manipulations with the second end of the fishing line are carried out in the same way.
    • The protrusions are inserted into the holes of the head, and then, removing the equipment from the temporary fasteners in the reel, a cover with latches is installed

    The above instructions on how to install a fishing line in the lawnmower will help not only correctly, but also quickly make the replacement procedure. Assembling the trimmer coil, as mentioned above, can be done without removing the head, but in this case, you will need to conveniently fix the tool. Video instruction is presented below.

    How to remove the spool from the trimmer and remove the line

    Initially, remove the line from the trimmer spool before inserting it into the trimmer spool. A reel or aiming device is a device that sits inside the mowing head, bobbin or drum. There are different types of heads (depending on the manufacturers), but the principle of replacing the line on the reel is the same for everyone. First of all, we will figure out how to remove the head from the tool, as well as how to get the drum and fishing line out of it.

    The instruction on how to unscrew the manual head on the trimmer is as follows:

    • Turn the tool upside down and, if necessary, clean it from dirt. With two fingers of one hand, grip the cover latches (on the mowing head), which are symmetrically positioned to each other. After lightly pressing them inward, remove the protective cover from the drum
    • Next, remove the line spool from the drum shaft. It is mounted on a shaft without fasteners, therefore it can be dismantled with one hand
    • The main part of the drum is fixed with a screw, which must be unscrewed with a screwdriver with an appropriate tip or bit
    • To unscrew, hold the drum base with one hand, and unscrew it counterclockwise with a screwdriver with the other
    • After that, you can start dismantling. To do this, you do not need to pull it with all your strength, but slightly shaking it to the sides, slowly disengage it from the metal shaft on which the drum is seated
    • When reinstalling, fit the head into the square slots

    This process is not difficult, and as you know, there is no need to dismantle the entire head if you know how the replacement is performed. When dismantling, consider the following nuances:

    • Periodic removal of the head is recommended to prevent corrosion of the threaded connection. If you never unscrew the screw, then if necessary, it will be difficult and even impossible to do this.
    • If the screw has a four-sided bore of the head, then for unscrewing it is necessary to select a screwdriver or bits of a suitable size in order to exclude licking of the edges on the head
    • When assembling the unit, treat the threaded seat with lubricants, such as grease or machine oil.
    • If the edges on the screw are licked, then you can use special clamping pliers to unscrew it.
    • There are drums that do not require preliminary disassembly. To dismantle them, grab it and rotate in the opposite direction of the clockwise direction

    Knowing how to disassemble the drum, you should continue to figure out how to replace the trimmer line. The video below shows a detailed process on how to open the trimmer coil and disassemble it.

    Step-by-step instructions on how to wind the trimmer reel and lawn mowers

    In order not to be mistaken with the choice of a suitable fishing line for your tool, you should first disassemble the head and look at the side wall of the reel. This information is usually presented on a tip, which will not allow you to make mistakes with the use of the appropriate equipment.

    If there is information on the spool about the diameter of the line you can fill in, then this information can be clarified in the instructions. Having decided on the thickness or diameter of the rig, it remains to figure out how to charge it. There are two ways to do this, but not all of them are applicable. We will consider both methods in detail, and depending on which models of lawn mowers and trimmers you use, you decide on your own which option is suitable.

    What you need to know about trimmer line

    A fishing line is a consumable made of nylon that serves as a cutting device. By means of this equipment, the grass is cut, which is ensured by rotating the tool head at a high frequency. This material has different thicknesses, which depends on its use on the corresponding tools low-power electric (from 1 to 1.6 mm), electric from 500 W (2-2.4 mm) and gasoline trimmers with lawn mowers (from 2.4 to 3. 2 mm).

    The more powerful the tool, the correspondingly thicker the cutting equipment should be. This affects not only the quality of the grass cut, but also the service life of the material. If you are wondering how to wind the trimmer coil, then it is time to change and reload the tool. With the onset of spring, this question is becoming more and more popular, so it’s time to figure out the step-by-step instructions for replacing the line in the trimmer reel.

    Learning to properly wind the line on the trimmer reel and lawn mowers installation instructions

    Private home owners know how essential a trimmer tool is. It can be gasoline and electric, and they differ in the design of power units. For cutting grass in areas where there are stones, trees and other obstructing objects, a fishing line is used as a cutting device. This consumable wears out during use, so how to wind the trimmer coil, we will consider in detail in the material.

    Method 1. how to properly wind the line or put it on a reel and choose the required length

    To implement this method, you will need to first prepare a fishing line of the required length (usually up to 4 meters). It all depends on the thickness of the equipment used, as well as the design of the coil. There is an easy way to find out the amount of line you need to refuel to charge the reel. To do this, wind the equipment inside the coil until it is aligned with the side projections. In this case, the equipment should not go beyond these extreme protrusions.

    The thicker the rig used, the shorter its length will be needed and vice versa, the thinner, the longer the segment will be needed.

    The instruction on how to properly tuck the equipment into the trimmer or lawn mowers is as follows:

    • To begin with, a piece of fishing line that was prepared to be installed in a reel must be folded in half. In this case, one edge should protrude more than the second by 10-15 cm
    • After that, take the second end from the other side, and fold it in half. Move to it so that the measured protrusion of 15 cm is preserved
    • In the inner baffle of the coil there is a slot into which the resulting loop should be inserted. The cut in the wall is shown in the photo below.
    • Next, we find out the direction of winding the line. If you wind the rig in the wrong direction, then it will not function correctly, and you will need to redo the work. To insert the line and wind it in the correct direction, inspect the surface of the spool. The direction of winding should be indicated on it (in 99% of cases, this direction is indicated). What the direction indicator on the coil looks like is shown in the photo below.
    • This arrow-shaped pointer can also have the designation, as in the example above “WIND LINE”, which means the direction of winding. If the pointer is missing on the coil, then you need to look at the head. There is a direction of its rotation on the head, and in order to properly wind the line, wind it on the drum in the opposite direction to the indication of the arrow indicator. So, if the arrow is on the tip, then you need to wind in the indicated direction, and if it is not there, then you should wind against the direction of the arrow on the surface of the head
    • Having decided on the direction of rotation, you should start winding. Each end should be guided in its own groove. If there is no separator, then the equipment must be laid in the appropriate distribution order.
    • When almost all the fishing line is wound on a reel, you will need to do the following. place a short part in the hole of the side wall of the aiming, the protrusion of which should be up to 10-15 cm, and then similarly do the procedure with the other end, placing it in the hole on the parallel side
    • We insert the coil into the head, first passing the ends of the line into the holes of the drum
    • We put the drum in place and, pulling the ends of the line, remove them from engagement with the temporary clamps in the wall of the reel. After that, you can put on the cover until the latch engages.
    • This completes the process of how to replace the fishing line on the trimmer, and if necessary, you can only trim the ends (if their length does not suit), and install the assembled drum on the tool

    With how to put the drum in place, no difficulties arise. There is a second way, how to charge the mowing equipment in the lawn mower. What is the difference, and how is the second method of threading the line on the reel of lawn mowers carried out, we will find out in detail.

    How does a line head work on a lawn mower why you need to know how it works

    Depending on the manufacturer, the heads differ structurally not only externally, but also internally. Most drums have a pressure spring inside (semi-automatic and automatic). Above is an instruction on how to disassemble the trimmer head without a spring, i.e. on the head of the manual type. The principle of dismantling a semi-automatic head with a spring inside is almost identical to the instructions described above.

    The principle of operation of the semi-automatic trimmer coil is as follows:

    • Inside the head there is a coil, which is fitted on the slots, which prevent its free movement.
    • A spring acts on the coil, which presses it against the slots in the cover structure
    • A fishing line is wound on the tip, the length of which depends on the tool itself. Usually this length is between 1 and 4 meters
    • During the performance of work, if it is necessary to increase the length of the line, the protruding part of the drum is pressed, whereby it disengages from the splines. In this case, the line is unwound from the drum, increasing in length
    • After releasing the required amount of fishing line, release the pressure and continue cutting the grass.

    The advantage of a tool with a fishing line is that this consumable does not require sharpening, compared to metal discs. In addition, if a stone or a tree comes across on the way, the line simply breaks off, without negatively affecting the gearbox and engine of the tool, as is the case with metal cutting discs.

    Knowing the design and device of the types of mowing or trimmer heads, it is necessary to go on to consider the process of threading the line into the trimmer spool. After all, it is this moment that causes difficulties for most owners of special tools.

    Tips and tricks on how to wind the line and what you need to know

    There are some useful tips and tricks that will be useful to learn not only for beginners, but also for experienced mowers. These tips will help prevent negative consequences in the form of injury and improper functioning of the mechanism. These guidelines read as follows:

    • It is necessary to install the cover until it clicks. over, this is 2 or more clicks, which depends on the number of latches. If one of the latch does not snap into place, the drum may jump out when starting the tool and injure a person.
    • Do not reel in the line with a strong pull, or more than you can insert it into place. It is better not to wind up the rig than there will be more of it, as this will lead to negative consequences in the form of the inability to unwind it if necessary
    • If you own a tool not with two line leads, but with one (usually these are low-power units), then the winding process is performed in a similar sequence, as described above, only with the difference in the absence of a middle rim between the extreme bases of the coil
    • After replacing the material, it is necessary to first check the operability of the tool, and after that start mowing the grass. If you do not make a preliminary check, then the scaffolding can unwind and injure a person

    The result of the work done is as follows. after the replacement of the new material, the usual one is enough for an area of ​​up to 600 square meters, but taking into account the presence of a reinforcing layer on the fishing line. Conventional nylon materials last less, which is important to consider when working. Do not try to cut thick-stemmed grass with fishing line, as there are special metal discs or knives for this.