How to rummage the lawn with a trimmer Rivne. Grass and weeds

Glass haircut with a trimmer

The height and frequency of mowing is dependent on the type of lawn, season and climate. Lawns of the ground are mowed at a level of 4-5 cm during the first two years, evenly lowering to 3-4 cm. The best height for garden and park lawns is 4.5-5 cm. Meadow lawns are mowed twice a season, thereby giving the opportunity to ripen seeds. The frequency of the mowing. Once a week, in damp weather. Every 5 days. In the dry period, the height of the haircut increases to 5-6 cm, and the interval between the haircuts. Up to 7-8 days. The lawn mowing is often carried out in coordination with the growth of herbs.

Lawn braids

Now there are a huge number of gas mowers models that differ not only in the price of the cutting element and the type of motor, and the presence of auxiliary options. Therefore, choosing a lawn mower, you should take into account the power of the motor, the area and shape of the lawn, also a number of other technical features.

The introduction of a hand lawn mower will allow you to not depend on the availability of energy sources and perform an ideal lawn mower without harm to nature. Sharp knives provide high quality of the mowing, although work for her is quite difficult.

Electronic mowers are ordinary in operation, ordinary in cleaning, quiet, relatively non.hazardous for the natural environment, are great for medium.sized lawns. In fact, the only inconvenience when using this type of mowal is the need to connect to a power source. Beautiful solution for small equal lawns.

Basin lawn mowers are completely suitable for mowing huge lawns at least some form, not being independent of external power sources. But gasoline mowers are harder, more difficult to use and give out a lot of noise.

For huge areas, there is a more difficult and large lawn processing technique. Usually, such machines are equipped not only by blades for trimming the grass, and also with tools for aeration and scoring. Some of them include the function of a garden vacuum cleaner for collecting leaves, sawdust and garbage cuttings. Large lawners are called garden tractors.

How to use mowed lawn grass

Take your time to get rid of cropped grass, this can and must be used. Let’s see how you can use cuttings for the lawn. For example, for mulching (in order to improve air and water access to plant roots), composting or feeding plants on the site.

Cut grass, which will be used for mulching, must be perfectly dried, after which it is laid out in flower beds, beds, at the foot of fruit trees and shrubs. Do not forget to update the mulching layer in time so that it does not melt, and the parasites do not start in it.

It is quite easy to feed the lawn with a mowed grass, it’s enough to throw it on the lawn (this is not acceptable for all types of lawn) and nutrients will fall into the soil when decomposed. Also, many gardeners prepare compost pits and moisturize them. When the grass rotates, mix it with manure, dissolve it in water and use it to power plants.

How to cut a lawn mower?

Cut the lawn on the site near the house using the lawn mower is not so difficult if you know where to start and which front of the work needs to be done first. When spring came, snow and grass on the lawn grew to 10 centimeters, it’s time to spend the first haircut.

To shorten the grass on the site correctly, you should adhere to the following recommendations:

• First of all, you need to process a plot along the contour and along the edge of the paths in order to strictly outline the front of the work and mark the boundaries. And also you need to walk along flower beds with flowers and trees if they grow on the lawn. Any technique is suitable for this: manual and electric. But with the help of the second, the work will turn out to be many times faster, however, it is convenient to use electrical engineering only along straight lines and angles. If a site with blurry boundaries and when it is necessary to make a smooth crossing, it is better to give preference to a lawn mower with manual control.
• While working with equipment, you must definitely use the whole body, do not allow only your hands to move. In order for the result to be better, you need to hold the lawn mower with both hands and move forward smoothly (only in one direction, if something is missed, then go back and walk around the same area).
• If possible, cutting the contour, move along the paths so as not to cut the grass too short.
• Move around the site slowly so that you do not have to return. Electric lawn mowers work quickly, because of which people often speed up the step, but in the end they get an unevenly trimmed area.

Before starting the haircut, you need to remove all unnecessary items from the lawn: garbage, garden equipment, toys, branches, etc. P.

The first haircut of the lawn. The height of the mowing

Excessive mowing is no less harmful than insufficient or too rare. The exposure of turf leads to the spread of weeds and various diseases, and in the spring-autumn period it is exposed to low temperatures.

Traditionally, garden and park types of lawns are cut at an altitude of 4-4.5 cm. This minimum mark is suitable for the middle of the season, if the coating of the lawn is sufficiently strengthened and develops rapidly. The first 3-4 spring haircuts, as well as the latter in the season, suggest a height of 5.5. 6 cm.

Approximately the same mark should be followed in the arid summer. Parters’ lawns are usually cut to a level of 3 cm, and sports-about 2 cm

Of course, no one is safe from the passes of this important procedure, and the grass grows too high

This is fixable, but it will require compliance with certain haircut rules. So, you can’t cut the grass right up to the required level. In the first haircut after passing the haircut, a grass 10-15 cm high can be shortened by half, in the second-to drop to the desired height.

There are several more important recommendations regarding the effective and safe haircut of the lawn:

The direction of the haircut should change periodically. it will have a beneficial effect on the quality of the herbal coating. It is best to move perpendicular to the direction taken during the last haircut each time. Thus, it is possible to avoid the thickening of the stems that make the grass hard and prickly.

It is recommended to trim the rectangular lawn, starting from its narrow part. In the case of its rounded shape, you should start moving along the contour, and then lay parallel stripes from the center of the silt and the elongated area.

Lawn care in the spring

The start of the season of care for emerald carpets does not coincide with the start of the main garden season. The first procedures for the lawn are carried out only in April, in the middle strip. traditionally not earlier than the third decade of the month

And even then in the first works you need to be careful and not harm turf by excessive load

Spring lawn fertilizer

The procedures in April are reduced only to the removal of dry grass and garbage from the surface of the lawn with light rakes or manually. They are cleaned only when moisture leaves the soil and Dernin will not be in a waterlogged state.

Full.fledged lawn care actually begins only in May. After thawing and drying out the upper soil, the soil begins to the first serious procedures:

• When establishing a stable positive temperature, first of all, it is often recommended to make nitrogen top dressing for rapidly growing and restoring turf. But for feeding you need a haircut, and top dressing needs to be postponed until the first mowing procedures.
• Carry out compulsory screenings, removing garbage, moss, dry grass.
• If necessary, on the lawn, sand is carried out, processing of propelled saps and shafts of grass. When laying the roll lawn, cut out and damaged areas of turf.
• With obvious signs of damage to fungi, fungicids are made to prevent the problem from spreading to a large area. But since all spring procedures contribute to the healing of Dernina, usually with serious measures they are waiting until the summer and use fungicides already if the main measures have not helped.
• After the grass rises to a height of 8 cm, the first mowing is carried out to a height of at least 5-6 cm. It is undesirable to leave mowed grass on the lawn in the spring.
• After the first or second haircut, the first top dressing is carried out. For spring, you need to use nitrogen mixtures, starting or complex fertilizers for lawns. The mixtures are made with abundant watering and on cool days, avoiding any procedures in dry and hot weather.
• After the second or third haircut, aeration is carried out, piercing Dernina to a depth of about 5 cm along the entire surface of the lawn.
• In damaged areas, they continue to hook and laying a new turf.
• Begin to fight weeds mechanically. by hand by handle.

Circle of shrubs

The tool should be kept as close to the bush as possible and slightly bow the head of the tool to the ground. The mowing of each bush takes place separately, bypass from left to right.

For work, you should use the haircut technique that corresponds to the conditions of the yard. You can also use several different techniques to get the perfect lawn. For example:

• Cutting. To cut along the boundaries of the lawn, you need to turn the trimmer for the grass at an angle so as to mow a little at an angle. The slope down helps to cut smaller, more controlled areas, allowing you to cut at the strongest angle.
• Edge. This method is useful when it is necessary to cut grass on the edge of a parallel surface, for example, on the access path or sidewalk. Instead of tilting the tool, it is necessary to keep it in such a way as to mow vertically.
• A braid for grass. It is necessary to gently swing a trimmer for grass on the U-shaped arc in order to move along the hard-to-reach area of ​​the lawn. This method provides a controlled pruning and even cut.

Trimmer care will maintain its performance for many years. After each use, it is necessary to wipe the grass and dirt. Finally, before long.term storage, it is necessary to empty the gas tank of the trimmer for the grass. If you buy a suitable trimmer for grass, save it in proper condition and remember the direction of cutting for safety, you can use your trimmer for grass as a professional and maintain the lawn in perfect condition.

The trimming of the bush

As you know, a trimmer for grass can be used not only for mowing grass. But also for trimming thin branches. For example, at the bushes. For this, as a rule, the working part of the unit has to be put in a position close to the vertical. As a result, the probability of capturing from the surface of the earth and the subsequent emission of small stones and garbage is great.

So that this does not cause any troubles, it should be remembered that garbage disclosure always occurs to the left side. Therefore, it is better to be located during work so that flying garbage is not directed at people or pets. But the perfect option would be their complete removal from the zone of your work.

However, the possible harm to people and animals is not the only potential trouble at all. Garbage and stones on the basis can damage the tool itself. Therefore, before starting work, it is advisable to remove them from the surface of the soil. At least the largest and most dangerous items.

Trimmer for grass when pumping slopes: Features of work

If there are height changes in the site, then it is better to start from the bottom point. over, the strip of the lawn should be bumping across the slope. Then you need to rise above to make a wrap in parallel to the previous.

If you follow such tactics, then just mowed plants will not cover the grass subject to subsequent haircut.

How to mow grass with a trimmer with a metal knife

As the border of the mowing area moves, move the fuel and the bag.

If the grass was setting down: you need to hand the steering wheel forward and mow to the left with an inclination by the handles to the left (sector ~ 11 hours) and the right with the tilt for the handles to the right (sector ~ 1 hour), and do not rush!, to mow the grass cleanly and so as not to “dig” the earth.

During the mowing of grass (and turns), do not forget to look around!:

• To notice the gesticulation of others, drown out the motor and remove the headphones,
• So that closer than 15 m children, animals, spectators and assistants do not come up, t.to. When a metal knife in the grass collided with a motionless object, a trimmer for grass or a lawn mower (motorcycle) can be strongly thrown to the side or expanded back, and a trimmer for the grass rotates at a speed of up to 10,500 rpm. And he is able to cut off his hand or leg.Also, when the grass is mocking the trimmer from under the knife, various objects (crushed stone, glass, garbage) can fly out and ricochet).

How to mow grass with a trimmer (more about the mowing technique)

The engine revolutions when the trimmer mowed depending on the load on the engine. the thicker the grass and, of course, is heavier than the engine, the bolder you need to open the “hole” (throttle in the diffusor of the carburetor).

Work speed of the engine during the mowing of grass with a trimmer try to keep constant (slightly higher than medium). or less gas. only depending on the overall load on the engine. No need to completely discard gas (and immediately acceleration again) with each wave of braids for grass. And the clutch is not for long, and the edges on the drive shaft can “overtake”, and the overall wear of the trimmer for grass (motorcycles) increases sharply.

Before mowing grass, we find out the parameters of the site

(to know which knives to take, how much fuel and time are needed)

• Grass density;
• The hardness of the grass;
• the splendor of the grass;
• wovenness of grass;
• (The height and thickness of the grass are not important)
• the boundaries of the site;
• what irregularities (how to come in);
• the presence of hidden obstacles (remember)
• that not cut (bushes, flowers, seedlings).

To mow grass in the summer is a disaster, and not just homework how to use a trimmer. If your yard or site is strongly overgrown with grass, you can scare you, but this part of the article will help to figure out how to mow grass with a trimmer easier and less irritating.

How to use a trimmer

Tips on how to mow grass

• Mowing grass when it is not very large. This will allow you to cope with work much easier and faster than if you mow a strongly overgrown lawn or yard. A large mass of grass, weeds, plants and trimmer will be hard to grind. In addition, a lot of chopped grass will lie on the surface, which must either be cleaned, or wait until it dries, or while it becomes compost, which is not very beautiful and can cause various diseases of the grass.
• Avoid mowing not grass, but fences, stones, bricks, any other hard objects, as this will greatly accelerate the wear of the fishing line and it will require its more common replacement.
• Some will have to wear an orthopedic corset (although it may seem stupid). Back support allows you to maintain performance longer and feel more comfortable.

Warning how to use a trimmer

Trimmer for grass, like a twin.franc grinder, chainsaw or garden tractor is unreasonable for what it is not intended for.

Keep a trimmer for the grass away from yourself so as not to cut off your fingers or leg.

Do not mow a trimmer in water or wet grass. If you have an electric trimmer for grass, you may hit an electric shock. If you have a gasoline trimmer for grass, you can pollute water and grass with fuel and exhaust gases.

You will need things to mow grass

• Pants. Preferably strong working jeans without holes. You can mow grass somewhere, so if your legs are not protected, soon you will feel how several thousand ants crawl along your legs and bite you. Sometimes a weed can scratch to the blood or stuck strongly, thrown back on the mower.
• Gloves. wandering, leather, it does not matter. If you mowed grass without gloves, then by the end of the kota you will not be able to move even a little finger without pain. The weight of the grass through a trimmer for the grass presses in the hands and abrasions and scuffs will appear on their hands if they were not in protecting gloves.
• Protective glasses. you cannot mow grass with your eyes closed, because small pieces of grass fly in the face. One good hitting your eyes will convince you that protective glasses are mandatory. This applies to one of the main rules how to use a trimmer.
• Have a sufficient amount of drinking water at hand. Even if you think it will not be hot, think again. You need to mow grass with a vibrating trimmer for a long time.
• Have a spare fishing line for a trimmer or a seasoned trimmer head to replace if it ends.
• If you have an electric trimmer for grass, you must have an additional extension cord. If you have a gasoline trimmer for grass, you must have a supply of fuel.
• Rake to rake mowed grass or weeds.
• Headdress if you work in the sun.
• High boots (pants are best tucked into boots).
• If you plan to work at dusk or later, make sure that you have a spray from insects and a lantern.

Safety precautions during work

Safety precautions when working with motorcycles are to fulfill the following requirements.

• Do not use trimmers in the rain or with increased humidity.
• People and animals should be at a distance of at least 15 m from the working device: trimming of grass, small garbage and stones fly out from under the cutting head at high speed and may injure.
• It is better to put on the grass trimmer to a dense fabric that completely closes the arms and legs.
• You need to work in protective glasses, gloves, headdress, closed shoes, special headphones or Berushas.
• The wire of the network trimmer for the grass should be behind the mower.

Important! You can’t stretch your hand or foot to the cutting head!

So, the use of manual vehicles for mowing grass allows you to maintain order on a small area. It is more convenient to use a mower in vast areas. In addition, a trimmer for grass is relevant when harvesting hay and restoring order in the territory: small herbal scraps can be mulched strawberries and other useful plants. You can clearly see the mowing process with this tool on the video.

Protective equipment when working with a motorcycle (trimmer)

Tip: This article does not replace the instructions given in the guide for the use and safety precautions. Always read the product management before use and observe safety precautions.

For safe work with a motorcycle (trimmer) you will need:

• Helmet;
• Headphones;
• Eye protection (mesh shield or glasses, but it is better to use both);
• Long durable pants (the legs are in the immediate vicinity of the knife or fishing line, so they must be protected);
• Shoes with a non.slip sole (preferably with a steel nose);
• Soft gloves (to protect and absorb vibration);

Knives for motorcycles (trimmer for grass)

When working with a motorcycle we can use a fishing line for a trimmer. However, a real advantage (in addition to high engine power) is the ability to equip metal knives.

Various types of knives for trimmers are designed to cut different types of vegetation:

• A knife with 8 or less teeth: grass and weeds;
• A knife with 9-40 teeth: thick weeds and shrubs;
• Knives-saws with more than 40 teeth: small trees and young seedlings;

When replacing a knife, be sure to use gloves.

Each knife indicates the size (diameter) of the landing hole in the center. This is usually 2.5 cm, but cases are different. Therefore, look in the operating manual, what size on your trimmer.

How to cut the lawn correctly?

Recently, more and more attention has been paid to arranging green lawns in summer cottages. This topic becomes more relevant from year to year. Many articles on the care of lawn, hundreds of discussions and Комментарии и мнения владельцев on social networks and on the Internet. The Champion team decided not to stand aside, but to share their observations and life hacks. And in the article it will be discussed, or rather, will go about the use of the lawn mower and cut the lawn.

The haircut of the lawn is not only beautiful

First of all, the haircut helps to fight weeds and prevents their flowering. Each of us probably likes to invite guests, arrange barbecue weekend and fry kebabs in the country. Agree that a beautiful smooth lawn is a great reason for compliments to your address. A good mood will definitely be provided.

Secondly, the haircut of the lawn stimulates the appearance of new shoots and enhances the density of the grass cover. If easier. family and children will be grateful for the wonderful “fluffy rug” and endless football matches in the yard. Why spoting accelerates the growth of grass, you ask? Everything is simple: according to various experts, most of the varieties of herbs used as a lawn once grew on wild pastures. Daily eating grass animals caused a reaction in the shoots to this action. They began to accelerate their own growth, smoking and compaction to grow faster and restore the number of shoots. We can observe the result of evolution and adaptation of grass to external environmental factors.

How much and how often to cut so that the lawn remains juicy, green and does not die? Many experts believe: it is necessary to shorten no more than 1/3 of the length of the grass. In height. For a more accurate understanding, we presented the gradations of heights for various lawns:

Decorative lawn-bevel height up to 4-7cm.

Functional lawn (for rest, games, picnics)-4-6cm.

Stalling (ceremonial) lawn-3-4cm (depending on the climate of the regions)

Sports lawn (sowing with cereals)-3-4cm.

For lawn grass, frequent haircuts do not pose threats, but it is necessary to properly care for the grass after mowing. In this case, top dressing and abundant watering with water are suitable. The frequency of the lawn haircut depends on the growth rate. But if the grass cover exceeds the above values, time to take on the lawn mower.

And so, you have already prepared a lawn mower, are ready to rush into battle, blood boils in veins, passions and stop! Let us first recall a few simple rules:

Do not mow the lawn in the rain or cloudy weather

After a haircut without a grass collector, remove mowed grass

Contact the edges of the lawn with a trimmer/scissors

ATTENTION! Before cutting the lawn, make sure that all extraneous objects, toys, etc. Removed from the surface of the mowing!

The Champion team recommends following the safety rules and is very worried about you. We still want you to see a new range of equipment in the coming months.

Let’s analyze all the haircut rules in order.

Morning or evening. here at your discretion. Someone prefers to wake up early and doing what you love. Someone, on the contrary, loves to mow in the evening and gradually go into the sunset enjoying the beauty of nature, bird singing and something we were distracted. Well, you understand.

It is best done to cut the lawn in dry weather. This will prevent damage to both the lawn and the lawn mower. Especially if you have electric lawners. Do not mow wet grass, t.to the effectiveness of the mowing will decrease, the engine will be overloaded and the grass will stick to the knife and the lawn mower. In addition, the lawn will be uneven.

Sharpening of knives is one of the important factors of success. The evenness of the lawn, its condition and the health of the shoots depends on sharpening. If the knives are poorly sharpened, grass blades will break out and there is a risk of getting a dry, ugly lawn in the future. To be as confident as possible as sharpening knives and their reliability, we suggest choosing a knife from the Champion’S list. Any of the selected knives pass several stages of quality control and has excellent parameters and characteristics.

In order for the lawn to “breathe” and compact faster, after mowing, all grass should be assembled from the lawn. By the way, we have our opinion on this subject.

When the area of ​​the lawn is large enough, after the mowing I want to relax and relax than run back and forth and collect grass with rakes. Especially at night (relevant for evening lawn mowers). We recommend using the Champion LM4622 lawn. She has two important advantages. The model is equipped with a grass collector. After the haircut, you just threw the mowed grass. This model has a mulching function. Grind the mowed grass and use it as a fertilizer in your area/lawn. We will tell you more about this function in the following articles. And all the functionality and parameters can be studied on the ChampionTool website.ru or at the dealers of your region.

In conclusion, like many of the experts of the region, we recommend that you use the Scarifier several times a year to clean the grass coating. This will improve access to the root system of both water and sunlight. And you can use such an excellent model of the Champion ESC1532 Scarifier. For complete aesthetic pleasure, we recommend that you trim the edges of the lawn with a trimmer or scissors. For this purpose, a trimmer for Champion ET350 grass is suitable.

Principle of operation

If we consider the principle of the trimmer for the grass, then it looks like a manual braid. The difference is that it is equipped with an engine, with its help the cutting element is brought into rotation.

Producer companies produce the following models of mowers:

• On which a gasoline engine is installed. Such garden tools have a fuel tank, this is their distinguishing feature.
• Electric engine devices. These tools have less weight, because they do not have a fuel tank. But when choosing such models, you need to take into account that a power source needs their work to work.

All electric braids for grass can be divided into those that work on batteries, and models connected to an electric network. Each species has its own characteristics, but they affect the power supply unit. If you do not take into account it, then the rest of the design are similar in different devices.

If you take any model of a trimmer for grass, then it consists of such elements as:

• motor;
• fuel tank (electric motor does not have it);
• levers with which the mowing is controlled;
• knife for cutting grass;
• barbell;
• Spool with wound fishing line, which is cutting grass;
• protective casing;
• conical gearbox.

The engine is placed near the mowing head, it can be installed from below or from above. Only those models that have a direct bar with a gearbox. If it is curved, then the indigenous bearing becomes a connecting element. It consists of 2 bushings.

As a cutting device, a fishing line for a trimmer is used. It is easy to replace with steel knives and discs, they can be made of plastic or metal.

The choice of cutting element depends on how hard the grass will have to mow. Most often, the work uses a fishing line for a trimmer, it is called the cord. There are products of various shapes on sale, among buyers a spiral and round is in demand.

The fishing line for the trimmer is wound on the coil, it is inserted into the bobbin, while the 2 ends of the wire remain free. Когда двигатель косилки начинает работать, шпулька вращается, трава срезается свободными концами лески.

How to use a trimmer correctly

Garden trimmers for grass are effective. Newchers think that it is easy to work with a lawn mower, because you just need to include it in a socket or pour fuel, but this is not entirely like that.

The efficiency of the garden tool and its service life directly depend on operating conditions. Therefore, before using a trimmer for grass, you need to perform preparatory work.

The lawn with which you need to mow the grass is carefully examined. Be sure to remove glass and large stones. Having flew out from under a working mower, they can injure a person. They remove the wire from the lawn, because it can be wound on a rotating element, break a mower.

After that they move to the installation of the cutting system. There are trimmers for low.power grass on sale, which use only a fishing line for a trimmer. It is designed for mowing juicy and soft grass. But there are models with a capacity of more than 1 kilowatts on which metal knives are installed. They cut sowing and other hard weeds, trim the young shrub.

In order to replace the cord with knives, you need to unscrew the mounting nut, install the cutting element. Then the nut must be returned to the place, tighten it with the key.

The operator must take care of his safety. Mow grass in tight protective clothes. Special glasses are used to protect the eyes, they will protect from dust, grass and flying garbage. Hands are covered with gloves.

The electric trimmer for the grass is included in the network, and the battery models are charged for several hours before starting operation. Fuel is poured into a gasoline mower.

The mower is kept so that the spool or knife is located parallel to the ground. When the tool is installed in the correct position, the motor is included. After the grass is bewildered, the mower is turned off.

First start

Before the first launch, the operator collects a mower, the procedure is described in the instructions that are attached to the product.

If the trimmer for the grass is gasoline, it is necessarily checked before operation. The fuel tank is filled along the neck.

The motor should work for the fuel, so at the first launch it should work for several minutes without load. After that, start mowing grass.

How to refuel a benzotrimer

Motokos working on gasoline are with two.stroke and four.stroke engines. The first option is much more common. What are the differences between them:

• in trimmers with a 2-tact engine, the response to press the inclusion lever is faster (for this reason the lawn mower is mainly equipped with this type of engine);
• A tool with a two.stroke engine will be much easier, as well as easier to maintain;
• Fuel consumption in a two-stroke engine is higher than in a 4-stroke with a similar power by about 30%;
• The 4x-stroke engine is more environmentally friendly, since the fuel in it burns completely and is not thrown into the atmosphere, as well as its noise level is much lower;
• And the most important distinguishing feature is the refueling: a 2x-stroke engine is equipped with one common tank, where gasoline mixed with butter is poured; 4x-tacte has a separate gas tank and a tank for motor oil.

For refueling, it is necessary to use fresh gasoline AI-92 or AI-95 and high-quality motor oil for garden equipment (for 2x- and 4-tact engines, manufacturers produce different oil). Oil can be used mineral, semi.synthetic or synthetic.

The proportion of gasoline and oil for trimmers with a 2x-tact engine can be found from the instructions for a specific model. Usually it is 50: 1, in some cases, proportions of 25: 1 or 40: 1 are recommended. Prepare the fuel mixture in a separate container with accurate observance of proportions. Never pour the liquids “by eye” directly into the tank without mixing them in advance. Detailed instructions for mixing a benzomalam, with video and description, can be found on our website here.

Running

Before starting operation, gasoline braids are necessarily rolled up. The operator turns on the motor, he must work for a while at idle. It is necessary to ensure that the engine does not overheat, the load should not be.

When running in, motorcycles increase the load gradually. If you start work with high speeds, the motor will work well, this will affect the further work of the mowing.

At the first launch, you should not fully develop a temporary resource. After the engine works at idle, you can proceed to processing the lawn. The lawn mower should operate for no more than 15 minutes, after which the engine is turned off, it must cool down.

If you need to run the electrimmer, the braid is first collected. Then make trial launches at least 3-5 times. If the engine works well, go to mowing. At first they work for no more than 5 minutes, then the duration of work is gradually increasing.

How to wear a belt

If the tool has a shoulder mount, before starting work it hangs on the shoulder. The trimmer for the grass is fixed on both shoulders if it has a backbone mount.

The model with a bicycle handle is held with 2 hands, the D-shaped handle is wrapped in palm. The belt must be worn so that it is convenient, then the back will not get tired.

How to cut the lawn so that it turns out to be even

So that the grass on the lawn is trimmed evenly, it is necessary to lower the mower as low as possible during operation. The site must be divided into squares. You need to work, moving clockwise. In this case, the hay will always lie on the left without interfering under the feet.

Kosim under hay

It is better to mow hay not with a fishing line, but a metal disk. Grass is cut under the root, maintaining its length as much as possible.

Spinning high grass

If you need to mow high grass, this is done in several suits. The lawn processes 2-3 times. The rotating part is lowered from top to bottom, in which case the grass is not wound on the reel.

The operator must remember that the grass wound to the coil leads to overheating of the motor. If this happened, the motorcycle is turned off, and the coil is cleaned.

Most effective mow grass with the ends of the fishing line, and not the entire length. In the second case, the tool works worse, engine overload is possible. If you need to cut the grass on the site of a large area, to increase the efficiency of a trimmer for the grass, you must be tilted towards the mowing.