How to squeeze a drill in a vice. Fasted cartridge

Jammed fists in the cartridge of an electric screwdriver

Any user of electric screwdriver met with the problem of jamming the cartridge. He is constantly subjected to vibrations, dynamic and shock waves. The chips from the metal, small mechanical particles, dust. which leads to malfunctions in the operation of the mechanism after a certain period of time, gets into the electric screwdriver. The article will talk about how to open the jammed cartridge of a screwdriver.

The cartridge is called fasteners, where the drill is fixed. Usually, standard drills are equipped with its fist.

From such vibration, it will loosen the grip and release the tool. If necessary, after the introduction of universal lubrication, the cartridge can be a little warm with a hairdryer. In addition to the lubrication of WD-40, you can use machine oil.

One way or another, it is necessary for the fluid to penetrate deep enough inside, where the point of its contact with the drill is located. This method is suitable for both owners, both standard fasteners and fast.packed.

In the event that the battering is jammed, then after lubrication the problem is quickly solved by using 2 divorces.

With the help of one, the base of the cartridge is compressed, and the other carefully rotates its upper part. In order not to damage the surface and the node itself, it is recommended to use soft and dense gaskets like the skin.

In addition, in order to open the cartridge, it is necessary that it cools. In some cases, this one of this action is enough for the fists to release the drill, and it could be extracted.

The last way is the complete immersion of the drill into machine or vegetable oil for one hour. In the event that it is absent, you can use gasoline. When combining the above methods, it will be much faster to get.

If the problem cannot be solved independently, it is worth resorting to the help of competent specialists of workshops, who in a short time eliminate the malfunction.

And what methods to cure a jammed cartridge from an electric screwdriver do you know?

I liked the article? Subscribe to us in Yandex Zen. By signing, you will be aware of all the most interesting news. Go and subscribe.

The presence of a house of various technical devices is simply necessary. We are talking about instruments such as a drill and an electric screwdriver. They are indispensable in the course of performing various small homework. But like any technique, they can also have malfunctions and break. For example, in an electric screwdriver, one of the most unstable parts is a cartridge. In the article, we consider how to remove and replace the cartridge in this device.

What it is?

This part is a cylinder made of metal mounted to the shaft of the tool in question. Its main task is to fix the bit of fasteners. Note that such a part is attached to a screwdriver using an internal thread located on a cartridge, or using a special car necessary for fixing on the shaft.

Quick.ashmous are the most common type. The shank is clamped by turning the instrumental sleeve. We are talking about shanks with a diameter of 0.8 to 25 millimeters. The only serious drawback of this product is a high price than the same key sleeves. There are enough seconds to fix the element in the BZP. In this case, it is not required to use any auxiliary mechanisms. In the case of fast.and.packed solutions, the adjustment sleeve canvas is corrugated, which facilitates the rotation of the cylinder. The pressure on the shank of the product is adjustable using a special locking element.

True, after time, parts of the clamping mechanism become unusable. For this reason, a gradual weakening of the clamp occurs, so the sleeve cannot fix a large.sized round shanks.

What to do if the drill is stuck in the penetrator?

Когда в процессе выполнения большого объема работы сверло с противоположной стороны расклёпывается, вытащить его из пеоратора свободно не получается.

To get a drill from the power tool, two ways are used:

• The stuck drill must be taken in a vice, while the tool, holding in the hands, shake to the sides and pull to yourself.
• In a large vice, using rubber lining, so as not to crush the housing, the peorator is clamped. Then the drill is clamped with a small vice and a small hammer is easily inflicted on it to the side aimed at the exit of the equipment from the clamping cartridge.

In both cases, you can use penetrating solutions.

If it is not possible to pull out the drill directly from the cartridge during turning, then you need to remove the details of the cartridge or try to crank the drill back 90 degrees. Its rotation usually leads to a complete replacement of the components of the clamping element.

If attempts to pull the drill out of the device are unsuccessful, then so that the peorator does not break out, it is better to seek help from the master.

Charges with tools happen both among amateurs and professionals. A drill or a drill stuck in a cartridge or wall is usually extracted by improvised means. It is more difficult to remove the fragment left in the tool. What way to choose depends on the reason why the drill jammed, as well as on those tools that are at the disposal.

Reasons: why the drill got up

Masters of experience call the three main reasons why the drill is not removed from the drill (regardless of the type of cartridge):

• Too large the diameter of the equipment. In the process, too large the drill is rubbed and stucks like a dowel.
• Weak steel and, as a result, deformation (most often, the tail grins like an anchor) drill or drill. For the same reason, the equipment breaks, especially in peorators and shock drill.
• The inconsistency of the shank and clamping mechanism of the cartridge. This often leads to the fact that the equipment falls apart, and the part remains in the cartridge, but it also happens that the drill / drill simply gets stuck.

Another, less common reason is rust. People who often engage in repairs are usually not faced with this, but if the drill / peorator with equipment is dusting for a long time on the balcony, in the barn, a summer house, an unheated house, garage, etc. P., The tool eats corrosion. Masters say in this case that the sting “.

How to insert a drill

On the ashorator itself there is also a quick.and.packed mechanism. Reliable fastening of the drill in it is provided with fixation using special balls, which, when closed, are tightly included in the grooves on the lower part of the drill.

In order to fix the necessary nozzle, whether it is a drill or crown, you need:

• take the lower part of the cartridge down (towards the pedorator);
• Holding it in this position, insert the right nozzle;
• let go of the cartridge.

If the balls are not entered in the grooves and the nozzle is staggering, then it is necessary to crank it until the structure is completely closed.

And to insert the drill into the peorator using an adapter, first a removable cartridge is fixed, which has a mount with grooves for the tool. Then the drill is installed directly. To pull out a drill or drill, you need to perform all the above actions again.

Here I would like to note that any manipulations for the installation and removal of a drill or other nozzles are preceded by a check of the working condition of the peorator mechanism. To do this, the unit must be included in the network and, having set the necessary operating mode, click on the start button. If the unit does not make unusual sounds and at the same time does not feel the extraneous smells of Gary or burned plastic, then the tool is ready to work.

If the nozzle is stuck

Like any tool, the peorator of even the highest quality can jam. When performing work, this becomes a problem that has several options and reasons.

Firstly, when the drill stuck in a removable cartridge, and secondly, if the nozzle jammed in the penetrator itself.

Когда проблема в самом зажиме инструмента или съемной головке, то достаточно просто залить немного жидкости типа WD-40 в патрон и немного подождать. The composition will relax the grip of the clamping device and the drill can be easily obtained.

There are times when there are no special mixtures and car shops at hand. The output may be ordinary kerosene. It is also poured, and, having waited for 10 minutes, try to free the nozzle. At the same time, light tapping on the clip and small staggering of the drill are acceptable. After completing the procedure, the clamp must be thoroughly cleaned and greased.

The cause of the malfunction happens in the poor quality of the drill itself. If a cheaper and soft alloy of metal was used in the manufacture, then the nozzle can damage the peorator during operation.

Correct this problem can be in several ways. The first thing you need to try is to squeeze the drill in a vise and, holding the tool in your hands, shake the nozzle and pull it over yourself. If the deformation is not very serious, then the nozzle will be able to pull out.

The second option provides for double fixation with a vice. a pencil on one side, and the drill on the other. Then take a small hammer and beat along the borax towards the exit from the clamp. During such an operation, you can use WD-40.

When not a single method helps, you can try to remove the details of the cartridge and turn the drill in the opposite direction about 90 degrees. However, this technique can completely ruin the details of the clamping device.

But if this option does not work, it is better not to try to disassemble the device. It is better to give such a peorator to the workshop to competent specialists.

It should be noted that in order to minimize such breakdowns, it is better to choose high.quality nozzles of leading brands. As a rule, such investments pay off the long time of the tool.

The nozzle can get stuck not only in the mechanism of the unit, but also in the wall during operation. In this case, a drill or a drill can be tried to release by turning on the return move (reverse) on the device.

If such a method does not work, then the nozzle is released from the clamp, insert another, and, drilling the wall around the stuck tip, remove it. If the drill broke during operation, then its residues are removed from the clamp, and a piece stuck in the wall is drilled or simply trimmed with a grinder at the same level with the working surface.

How to choose material?

The choice of material for the rack is determined depending on the further functions of the resulting machine. If with its help it is only planned to be drilled, then the design is allowed to assemble from ordinary woods. If the stand should turn out to be more mobile and functional, then it is worth making some details from steel. A drill bed is traditionally made either from a wooden sheet with a thickness exceeding twenty millimeters, or from a metal plate with a thickness of at least ten millimeters. The specific choice of material and its thickness should depend on the power of the drill used. In addition, it can be strengthened with an additional layer of plywood of the required size. so the surface will turn out to be perfectly even and more convenient for operation.

The stand on which the drill itself is located is also made either from a metal or wooden slab. In addition to the guides, a clip for fixing the drilling tool should be created on it. The carriage can again be implemented from wood or metal.

Separately, it is worth mentioning the possibility of making a machine from an old photo surgeon.

Such a system, as a rule, is equipped with a suitable bed, and a counter, and even a control mechanism equipped with a handle. The drill in this case will move using the photo enurert handle, which should be cranked. Before operation, it will be enough only to remove the tank with a light bulb and lenses and install a clamp for drums in a vacant place.

In addition, it will be possible to create a machine from the steering rack. In this case, the part is most often taken from a domestic auto industry, for example, VAZ, Tavria or and acts as a rack and a lifting mechanism. The base will need to be made independently. The advantages of handmade design are called a small price and accessibility of materials that can be purchased at enterprises or even find on their own among waste. parts that were previously in use are not a problem. Among the disadvantages of such a specific machine call it an unpresentable appearance, as well as not too outstanding accuracy.

By the way, for the manufacture of a home.made machine, one important rule applies: the more powerful the drill that is meant to use, the stronger the whole auxiliary structure should be. In the situation when the stand is made of wood, it should be understood that this material is quite weak, able to deteriorate when changing humidity in the room, and also often subjected to backlash.

Training

At the preparation stage, two main steps must be taken. The first is to find drawings of the most suitable design on the Internet. Second. prepare the required tools and materials.

For example, to create a simplest rack for a drill, you will need:

• Boards made of wood, the thickness of which reaches twenty millimeters;
• medium.sized wooden box;
• Furniture guides;
• threaded rod responsible for the possibility of moving in the structure;
• about twenty screws and thirty screws;
• The carpentry glue.

In addition, it is worth preparing a saw, a clamp, screwdrivers, sandpaper and, of course, the drill itself.

Training

At the preparation stage, two main steps must be taken. The first is to find drawings of the most suitable design on the Internet. Second. prepare the required tools and materials.

For example, to create a simplest rack for a drill, you will need:

• Boards made of wood, the thickness of which reaches twenty millimeters;
• medium.sized wooden box;
• Furniture guides;
• threaded rod responsible for the possibility of moving in the structure;
• about twenty screws and thirty screws;
• The carpentry glue.

In addition, it is worth preparing a saw, a clamp, screwdrivers, sandpaper and, of course, the drill itself.

Production instructions

In principle, the assembly of almost any stand for the drill occurs according to the same scheme. After the bed is selected, and, if necessary, the corners are attached, the support for the rack is fixed on it. At the next stage, the stand itself is connected to the base using screw joints. Then each guide should be mounted on the rack, which is convenient to do using furniture fasteners. It is important to mention that the guides should be without a transverse backlash.

At the next stage, a carriage is installed on the moving element, on which the holder for the drill itself will be placed.

The dimensions of the carriage depend on the size of the drill. The drill device can be fixed using two ways. Firstly, it can be clamps that will pass through specially drilled holes in the carriage. For reliable fixation, you will have to tighten them very tightly.

Secondly, the device is fixed using a special pad-bracket.

It is usually made of a wooden plate, attached to the base carriage at an angle of ninety degrees and strengthened by metal corners. In the block itself, it will be necessary to make a circular neckline for a drill, the diameter of which is half a million less than a drill diameter, as well as a slot to fix the drill in the hole. The hole is created either by a cylindrical nozzle, or according to a simple instruction. First, the diameter of the drill is measured and a circle is drawn on a wooden plate. Followed by a circle from the inside, several holes are made. With a file or a special tool, the gaps between the small holes are cut off, and the resulting hole is processed with a file.

In order for the drill to calmly move up and down, you will have to create another important knot from the handle that triggers the movement of the carriage, as well as the springs returning it to its original state.

The latter can either be joined with a handle, or separately placed at the bottom of the carriage using special grooves. In the second case, when the handle is pressed, the carriage with a fixed device goes down, and the processed part, respectively, is drilled. At this time, the springs storage energy, and when the handle is released, the carriage will return upstairs.

Possible problems with the cartridge

Any device, no matter how high quality it has, wears out over time, is produced and fails. Cartridges for a drill. no exception. Most often, the cause of the breakdown is the wear of the petals holding the drill. their edges are erased, from this a beating occurs, the play of the working element occurs. The problem of turning the drill during its pressing to the processed surface is equally often found. Such a malfunction indicates the wear of the landing thread or the production of the instrumental cone, depending on the variety of the mechanism.

There are many other malfunctions when the cartridge sees or jammed it.

In any case, at the first violations of normal work, it is necessary to stop the operation of the tool and identify the cause. Otherwise, there is a risk of bringing the mechanism to a state where the repair becomes impossible, and a complete replacement of the entire element will be required, which will cost much more.

You will learn about how easy it is to remove the drill or screwdriver cartridge or screwdriver in the next video.

Holder for a drill

Drill in hands, drill, wall or board. such an elementary algorithm is understandable and familiar to any home master. Appetite comes during meals, and I want to use the tool more rationally.

Using simple devices, an ordinary electric drill can be turned into a whole set of power tools:

• grinder;
• milling mill;
• grinding unit;
• lathe;
• Disk saw (subject to safety measures).

This is far from a complete list, a skilled master will be able to “force” the tool to perform other tasks. Of course, holding the tool in the hands, nothing can be done from this.

A certain fixer for the case is needed, the so.called “third hand”. Such devices exist: in any electrical goods store you can choose a drill holder.

In fact, the task of the device is quite simple: to fix the drill housing in a certain position so that your hands can hold the processed workpiece.

In addition, some nozzles for a drill (for example, a grinding circle), when touched the workpiece, strive to throw the tool to the side. It is impossible to hold the workpiece and drill in one position if only the strength of the hands is used.

Of course, you can try to fix the power tool in a vice, but this is an unreliable way, in addition, you can ruin the case. The manufacturers of the tool took care of this possibility. Each drill has a special cylindrical submission in the spindle rotation zone: the so.called “neck”.

Technologically, this is the place of fastening of an additional handle. Structurally. this is the most successful point for fixing the tool.

Inside the neck is the main bearing of a rotating shaft, so the location of the tool is quite balanced. It is enough to fix the clamp on the workbench, put the neck of the drill into it, and we get an electric motor with a spindle (cartridge).

How is the simplest drill holder arranged

Durable clamping type of clamp, holds the device on any flat surface (table, workbench, stool, vertical rack wall). Based on the clamp, in which the power tool is fixed. The joint can be tough, that is, the position of the drill cannot be changed.

Some models are equipped with a turning mechanism of the clamp. Rotation is carried out in one plane (table plane). In addition, if you remove the clamp (clamp), you can fix the holder of the holder stationary. True, for this you will have to drill a hole in the table. So this method is only suitable for a workshop in a workshop.

By installing the drill in this holder, you get at least a sharpener machine.

A disk for sandpaper (Velcro) is inserted into the cartridge, and you can not only sharpen the knives for the spouse, but also process the harvesting of a complex shape.

And if you fix the emphasis opposite the disk, you can polish fairly solid materials: metal, stone, and pr. If your holder is reliable enough, you can organize a mini circular saw.

Important! No manufacturer of saw discs provides for such a use. Working with a homemade circular is potentially dangerous.

One of the popular applications of such a holder is a mini.turning machine from a drill.

• simplicity (respectively, low cost).
• reliable fixation (less joints. more stable design).
• the device is able to hold a fairly heavy tool.

Holder with two degrees of freedom

The device has two articulated joints between the clamp (clamp) and the clamp for fixing the drill. The axes of the rotation of the hinges are located at an angle of 90 °, and allow the tool to position the tool at any angle to the working plane of the workbench. This can be seen in the illustration.

Of course, such a holder will no longer be fixed directly on the workbench (stationary), it works only with a clamp. It will not work to quickly direct the axis: for security purposes, first one hinges are fixed, then the second.

Nevertheless, this device makes it possible to use a drill as a milling cutter, with an arbitrary location of the shaft. Or you just have a rotation axis as you are convenient at the moment.

• Unknown setting of position, you have to fix the hinges in turn. In addition, there are certain restrictions on the size of the power tool (a large drill in such a holder cannot be fixed).
• There are questions for reliability: the more hinged compounds, the lower the accuracy and strength of the fastening.

Drill holder with ball joint

This “third hand” allows you to direct the tool at the required angle in one motion. Freedom of movement is limited by a hemisphere, that is, a position in space can be any.

This design is familiar to many: car holders for smartphones and DVRs work on the same principle. But the drill is not a mobile phone, therefore, special strength requirements are imposed on the ball clar.

He should not weaken the “grip” with strong vibration, and at the same time, the effort to unwind the nut should not be too high. Otherwise, the main trump card is lost: the promptness of the movement.

Based on homework, you can either choose the type of holder from our review, or make it yourself (taking responsibility for safety).

Homemade drill stand: with your own hands, drawings, vertical drilling holder, from a photographer, from a steering rack

Drilling is one of the most popular methods of quick receipt of a hole of different diameter. The process allows you to get a new hole in a continuous material (wood or metal) or expand the diameter of an existing hole (drilling).

The use of a rack for a drill helps to improve the process, accelerate the result. Professional devices are expensive, cheap analogues. a waste of money, as they have a significant backlash that gives inaccurate result when drilling.

What is needed for?

DIY drill stand. an option to get a device at home, which is suitable for the required type of work.

Standing will help perform various technological operations.

The device made on its own can cost cheaper than Chinese analogues and not be worst in quality.

The drill stand is used as a supporting element during operation, necessary when performing a number of tasks, when drilling holes in strictly defined coal, when the drill is difficult to hold by weight.

Advantages of use

Application in the operation of a persistent device brings additional improvements to the drilling process:

• The workpiece on the machine is fixed, which simplifies drilling when using a hand tool;
• The stand made at home is suitable for the tool used;
• The stand is created for a certain type of work, this further improves the process of its implementation;
• The home version of the device can be cheaper than ready.made stands;
• In the manufacture of the device, it is possible to use improvised materials. parts of old furniture, equipment;
• the ability to expand the functional parameters of the drilling process, for example, make a rotary drill when working on 180.

The creation of the rack allows you to get a functional device for a certain type of work.

Device

The design of the rack consists of the main and additional elements, which include fasteners, guides and other parts and details of the rack.

• Bed. the main supporting part of the device.
• Stand. serves to fix the tool and move it using auxiliary elements.
• Movement mechanism. can be lever or hinge. The mechanism allows you to control the direction of movement of the drill when drilling. As part of the control is a pen or lever.
• Holder. holds the tool in weight in the process.

Production

Regardless of the modification of the rack and the material of its manufacture, the constructive main assembly algorithm of the device is unified. The production process consists of preparatory work and the main process. assembly.

• rack design planning;
• transferring the plan to the drawing;
• drawing up a list of necessary materials from the availability of those that need to be purchased. Compilation of the estimate of work.

A step.by.step algorithm

• Production of bed. The main support element should be strong enough to withstand the weight of the workpiece and additional load when drilling. This indicator is calculated individually depending on the type of work. Recommended minimum wood thickness of wood. 300 mm, metal. 200 mm.
• Installation on the bed support and racks.

If the block is wooden. use a drill, cutting tools, sandpaper. If the block is metal, a corner grinder is needed to create a hole. As a block, a metal strip curved around the drill circled and a screw fixed with a screw can be used. It is also attached to the rack with a screw. In this case, such a part of the node should withstand the weight of the tool in operation.

If it is necessary to perform work in addition to drilling, parts of the machine are attached to the machine according to the drawing. For example, for angular drilling, the stand is finalized with an additional plate with holes that will help to fix the rack at different angles. Milling requires the installation of a horizontal stand with a vice that is attached to the bed.

Important! Linoleum on the metallic basis of the bed so that metal blanks are not damaged during the drilling.

Necessary materials

Materials and tools for the manufacture of drilling racks for a drill are used depending on the capabilities and availability of improvised materials. But still a certain list, there is. In the future, in the manufacture of a personal rack, materials can be adapted. What you need for work:

• Scheme. before starting work, it is necessary to draw a machine plan.
• Hammer. required to fix the rack elements.
• The base for the bed is a stove a wood-piece plate or a metal profile.
• Passatigi, ticks.
• Metal corner.
• Screwdriver Set.
• Rasp.
• Guide elements for working with drywall.
• Springs.
• Handle or lever for the machine. Can be purchased or made of materials in stock.
• Drill.
• Brush with a thread.
• Fasteners. screws or screws in the amount of several dozen.
• Additionally, if a tree is used:
• The carpentry glue.
• Cutting tools. saw, clamp.
• Sandpaper.
• Materials for the manufacture of the rack are simple, they are easy to find in a construction store, most of the list is available at home.
• When choosing materials, it must be borne in mind that the quality of the rack depends on their quality.

Materials for the manufacture of the rack are simple, they are easy to find in a construction store, most of the list is at home. When choosing materials, it must be borne in mind that the quality of the rack depends on their quality.

Stanin

The main supporting part of the device can be made of both wood and metal. The iron base is a plate with a thickness of 10 to 20 mm.

DIY DIY DRASED DRASTENTS

For household repair and work at the summer cottage, various power tools are used. Specialized additional devices and devices are available for them, many of which are allowed to be made with their own hands.

Difficult industrial devices are better to get ready.made, and workbenching trips, tables, nozzles and almost everything else can be done without the help of others. Needlery devices for power tools can be adjusted to the necessary technical conditions.

Classification of devices for power tools

Do.it.yourself devices for power tools are generally accepted to systematize in subsequent categories:

• Tools and nozzles for processing. These are manual devices, which include polishing nozzles and bars for corner grinders, drill.
• Devices for modifying the position, installation of a certain angle of cutting, drilling and the rest. These are the main surfaces, standards, guides. They will be able to carry out a different outer type, often made of metal or wood.
• Devices for dustwall. Similar devices are used in order to remove the sawdust from the working plane, dust, chips. It is not so difficult to make such devices with your own hands, as a rule, previously available fan holes in equipment are used for fastening.
• With their own hands, grinding nozzles, structures or bars determined to treat surfaces are collected with their own hands. For example, for grinding a wooden surface or cleansing the alloy it is possible to use a wooden plate with a handle on top. In her work side, sandpaper is strengthened. The model of the platform can be somewhat, importantly, it is only true to choose an abrasive material.

Freseer table device diagram

Different devices for power tools happen differently, but sometimes they have overalls, as in the case of milling machines and saws.

It is recommended to choose an improved table, which will contain everything, without exception, the necessary for comfortable and not dangerous work. The most common view is a milling table made in the form of a large plank that has an opening for a cutter and a plank-control.

The scale of the working countertop can be different, without exception, depending on which work will be carried out directly. The most ideal look is a table with the legs of the required height. And working and guide planks are made from the sheet wood-bearing plate. In this case, a vice, clamps can be taken into account on the surface.

The legs for the table are more correctly made in general, provide a backup set.

Larks for power tools

To work with numerous devices, you will need to improve the workplace. For a home workshop or for auto garage, it may be a slight, small.sized and universal workbench necessary.

It is not so difficult to make it without the help of others, you should only specifically make an improvement in your choice, for what functions it is needed.

It is more correct in general to make a workbench that can be used at some height, including on the table.

Then the power tool can be comfortable to have a comfort, to change its position with need.

For work, it is recommended to use various solid wood, a maple is considered a common material that is simply processed, while it owns the necessary hardness and strength.

To register on the table to install, it is possible to attach comfortable legs or clamps. A vice is needed for the workbench, they are often used in work, which guarantees an improvement in its quality.

Nozzles for a drill

For a drill during the period of work, various nozzles can be needed. They make it possible to simplify work, make it simpler, comfortable, fast. For a drill, a huge number of self.useings are used, which numerous manufacturers today took in the form of the basis for the study of specialized sets. A list of devices that can be made with your own hands is a huge.

Devices for power tools:

• Fasters-border guards. At the time of repair and construction work, it will be necessary to make the holes of the required diameter to the precisely established depth. Directly for this, a fairly elementary nozzle is used, which consists of 3 elements. It can be made with your own hands, while the characteristics of the holes simply and quickly change with need. The 1st part of the device is a clamp for holding, it is installed directly in the device block-body. This kind of clamp has 2 holes, they are introduced stopping in the form of metal rods by 6 millimeters. The rods are bended with the need. During the work, the desired angle of the slope of the drill is exhibited to create holes with set parameters. Drilling depth limiter
• Clipses are a specialized device, which in appearance resembles a huge compass. Metal rod nozzles are compiled. The vertical share performs the significance of the stop, at its end a specialized thickening is made. Horizontal is mounted to the vertical part, on the one side of which a comfortable handle is made, and on the other, a ring is welded. For the device, the transpower of the mounting ring should be provided so that the electric drill does not slip out, close in it during operation. From the inside it is more correct to attach a rubber ring in general, which can help fix more reliable.

Various devices for power tools are needed in order to make the work most convenient and simple.

It is not always possible to buy such devices, of course, and often they are necessary as a whole a couple of times. For this reason, it is much easier to make them without the help of others, having spent not so much time.

Dragon holders: structure. How to make yourself?

Everyone who worked with a manual drill knows how difficult it is to observe a strict vertical. The slightest deviation can lead to a breakdown of the drill. To prevent such trouble, it is recommended to use a vertical holder for a drill. Such a machine is available in every locksmith workshop.

Old manual drill. what can be made of it with your own hands

A manual drill is a trouble.free drilling tool that was very popular half a century ago. As soon as electric drills appeared, the demand for manual devices decreased, but did not disappear completely.

Today this tool is probably dusting in the garage, and everyone wonders what can be done from the old hand drill. You can try to sell the tool, but do not rush, you will be able to help out no more than 100 for this tool, but having made useful homemade products, you get a unique unit.

What can be made from the tool under consideration, consider with a detailed description.

Interesting facts about a hand drill

The tool under consideration from the moment of its invention was used actively for drilling wooden and metal structures, and for drilling concrete such a device is not intended.

This is due to the fact that there is no shock function in the device, so it is almost impossible to drill a hole in concrete with such a tool. However, home craftsmen found a way out of the situation.

During the drilling of concrete, periodic blows with a hammer on the heel were delivered, which allowed the drill to move inside the material.

The main drawback of the tool knows everyone who has to use it at least once. It consists in the need to make physical efforts. If a little effort was required when drilling a tree, then when working with metal and concrete, it took at least a few hours to achieve results.

The principle of operation of the tool under consideration is simple, and is to transmit rotational manipulations from the handle to the cartridge of the tool after a couple of gear gears.

Gears contribute to an increase in the speed of rotation of the cartridge, but the force of moment is reduced. A simple and uncomplicated design makes the tool under consideration not only as a repair.free, but still durable.

All that is needed to extend the service life is to monitor the amount of lubricant on the gears of the tool.

So, if you remembered the design of the mechanism of a hand drill, and also what it is, then it is time to figure out what can be done from this tool.

Device for twisting and twisting long self.tapping screws

To twist or twist long self.tapping screw into a tree, you will need to make a lot of effort. If you tried to do this with an electric screwdriver or electric drill, then you know that it is quite difficult to do it.

It will “enter” a certain deepening of the self.tapping screw, but it is almost impossible to tighten it with fully electrical tools.

It is also extremely difficult to manually do this, so you should call an old manual drill to the rescue.

In remodeling, a tool for screwing or unscrewing long self.tapping screws does not need. It is only necessary to squeeze in the zani cartridge of the device of the corresponding size to the bat, and get down to business. The effectiveness of the use of manual tools with screwing long self.tapping screws is an order of magnitude higher compared to low.power screwdrivers and high.speed electric drills.

!Achieving the result depends on the correct choice of the bit for the hat of the screw self.tapping screw.

Making a nozzle for an electric screwdriver from a hand drill

Few people know what can be done from the old drill, so do not rush to dispose or sell this invaluable tool.

From it you can make a device for an electric screwdriver, which is designed to screw and unscrew different fasteners. It can be not only long screws, but also bolts with nuts.

The secret of this device is that you can make a very useful thing from the old drill, which will allow you to get to hard.to.reach places with the subsequent unscrewing of fasteners.

The principle of manufacture of a nozzle or device for an electric screwdriver from a hand drill is to perform such manipulations:

• First, we release the tool from unnecessary details. To do this, dismantle the cartridge from the tool, as well as the handle
• A stubborn heel is also dismantled, which will not be needed in the new device
• The shaft on which the cartridge was located has a fairly large diameter. It will not work to install a shaft of such a diameter in the cartridge of an electric screwdriver, so we proceed to its grinding
• Grounding the shaft to reduce its diameter is recommended on a lathe. The use of an emery circle or corner grinding for such purposes is not recommended, since there will be unevenly stinging
• To hide the shaft on a lathe, it will need to initially dismantle it from the tool. It is not difficult to do it. In the mechanism near the conical gear, which is planted on the shaft, there is a hole with a cobble. This Shplint must be knocked out, thereby separating the gear from the shaft
• After gathering the shaft up to 8-10 mm on a lathe, it should be installed in place, not forgetting to sprinkle. The shaft is made of hot steel, so before you grind it, it is recommended to carry out heat treatment (heat it with a soldering lamp)
• The shaft moves using a ball bearing, which can be lubricated to extend its service life
• The first part of the work was completed. The shaft, which was stood, will be used on the new device as a transmitted device. The working element on the device will be a shaft on which the handle was attached
• The second shaft has a specific hexagonal shape, which should also be processed so that it can be put on it end heads or other nozzles. The easiest option is to make a square entity from the hexagonal form of the end protrusion of the head
• You can do this with a corner grinder and a cutting circle. At the same time, only heads can be installed on such a shaft for screwing and unscrewing bolted joints
• If you plan to use a device for other purposes, then you can cut threads on the shaft, having previously made it a cylindrical shape and turning it to the desired size
• On the chopped thread, it is necessary to screw the cartridge from the drill, in which various nozzles can be installed. bats, mixers, drills, cutters, etc.P.
• Consider that to install the cartridge on the secondary shaft of the device, you will also need to cut the internal thread for the control fixing of the cane cartridge
• At the end of the manufacture of the device from the old manual drill, it is necessary to cut off the rest on which a stubborn paw was attached
• After that, a home.made device is ready for use. It remains to fix it in the cartridge of an electric screwdriver, and test

What is the drilling cartridge for a drill in the way of clamping

In household drifts and screwdrivers, one of the types is usually installed by the method of squeezing the working tool of cartridges, this is using the key and quickly ascense. Key cam cartridges appeared for a long time and are well known to any home master. Quickly packed cartridges began to be used recently, and they quickly gained great popularity.

In the photo on the left, you see a fast.packed cartridge, and on the right. the key with the key. There is an opinion that a key cartridge is better clamping the drill, but from many years of operating experience both a key cartridge and a fast.packed I dare to say that there is no difference. Both types of cartridges are clamped with the same success. Only the convenience and speed of changing drills in a drill with a fast.packed cartridge is undeniable. You do not need a key that is always lost when working if it is not fixed on a drill or tied to it on a rope, you need to use two hands to clamp the drill.

The method of clamping the cartridge is not related to the method of its attachment to the drill shaft, so if you change the cartridge with the key method of the clamp, I advise you to install a cartridge instead of it with a rapidly packed method of fixing the drills.

How to unscrew from the drill a cartridge fixed using a threaded connection

As a rule, cartridges, fixed using a thread on the tool shaft, are additionally fixed with a screw with left thread. Therefore, I will eat a drilling cartridge should begin with the unscruption of this screw. In order to get to the screw, you need to fists of the cartridge how much it is possible to drown inward, as shown in the photo.

On the bottom of the cartridge in the center, the head of the screw with a slot under a cross or asterisk should appear in the center. So that the screw does not unscrew when drilling, it is installed with left thread. Therefore, you need to unscrew the screw, rotating the screwdriver clockwise. There may not be a screw. In this case, they immediately proceed to the second step. unscrewing the cartridge.

How to unscrew the cartridge from the rampart of a drill or electric screwdriver

To remove the cartridge from the tool, you need to fix the shaft and capture the cartridge over the case to lead it, turning counterclockwise, if you look from the cam. The main thing is to disrupt the cartridge from the dead point, then it usually easily unscrews.

I was lucky, since there were chamfers on a round basis of the cartridge, for which it was good to catch on an velvet key in the patron bought to replace the cartridge of such samples.

After capturing the cartridge with an open key and one sharp blow to the key with a hammer, even without fixing the shaft, as in the photo, the cartridge was built from the place. But was unscrewed tight, and this was his own reason. I had to continue to twist it with light blows on the key with a hammer.

Looking inside the cartridge, I did not notice the fixing screw because the hole in the head under the bit of the appearance of the star was clogged with mud, which just had to be removed. Therefore, unscrewing the cartridge, I simultaneously pulled the thread of the fixing screw, it is strange that it did not break off.

If there are no chamfers on the basis of the cartridge, then you need to clamp in its lips a hexagonal bar or bolt M10-12 with a hexagonal head, on which put the key and hit it with a hammer. If in this way the cartridge does not work out, then you have to disassemble the drill, remove the shaft with the cartridge, clamp it in a vice and twist it. Instead of an vengeal key, you can use the pipe key by capturing the cartridge by the outer part of the case.

How to screw a cartridge on a drill shaft or electric screwdriver

It was not possible to find a new screw with left thread, because they are used only in exceptional cases. I tried to tighten the wines in place in the rampart, spun without problems and kept, to my surprise, tightly.

For a more convenient puff and further unscrewing, I decided to cut with a hacksaw on metal in the head of the screw of the slot under a flat screwdriver. In order not to spoil the already spoiled thread, before the clip of the screw in a vice, he wrapped a thread with a piece of skin.

In advance, the same type of drilling fast.packed cartridge was bought in advance. To install it on the drill did not represent any difficulties. Screwed clockwise like an ordinary nut on a bolt. It is slightly slightly a cartridge to make a shaft thread and holding a slightly cartridge over the case turn on the drill. When the cartridge wraps up to the stop, release it and turn off the drill.

Next, you need to unclench the fists of the cartridge and screw the fixing screw. Now the drill is repaired and is ready for work again. Test drilling showed that the drill began to work as a new one, the cartridge is held tight, the drill is easily and reliably clamped.