How to start an electric trimmer for grass for grass. Fishing line refueling

What you need to know before using a new lawn mower

The question is how to start a trimmer for grass if a trimmer for grass does not start or does not start to arise if the engine of a gasoline trimmer for the grass is worn out, unresolved, or when a lot of fuel has got into the combustion chamber due to violation of the engine (when the engine was “sucked” ). To help the engine to start, you can pour a little fuel through the candle hole into the cylinder. To do this, it is better to use a special starting liquid, but you can also conventional fuel from the tank of the starting trimmer for grass or lawn mower.

Checking the gearbox before starting a gasoline trimmer for grass must be created on a permanent base. The lack of lubricant or its small amount increases the friction of the gear transmission of a gearbox that works at fairly large speeds. The result is overheating and gears. Motokosa gearbox fails. To prevent the appearance of such a breakdown during use and is helped by constant inspection.

If, before the start of a gasoline braid for grass, the missing amount of lubrication in the gearbox or its absence, Litol is laid in the case. To do this, you need to unscrew the screw on the gear housing and pace the “lilest” in the amount of 1-2 ml.

Working with a gasoline trimmer for a long time, every 8-10 mothers add grease to the gearbox of the bar.

Preparation of the correct fuel mixture

Before proceeding with the run.in the new engine of the lawn mower, you need to also correctly prepare the fuel mixture. As implies for two.stroke engines, it is prepared from special two.stroke oil and gasoline, taken in certain ratios. You can find out the proportions from the annotation attached to the tool, or on the lubricant label. From the annotation, you will also learn the recommended type of fuel, as well as the recommended type of motor oil.

Cook fuel in small quantities sufficient for the 1st mowing of grass. Use for fuel special canisters made of plastic, or separate glass dishes or metal. The oil is most perfect to type honey with a syringe.

How to start a lawn mower. a gasoline trimmer for the grass launch of a cold lawn mower

, Gasoline trimmer for grass. video lesson Starting a cool gas.beam: 1. We prepare gasoline.

How to get a motorcycle

We start a benzo-trimmer for grass for mowing grass.

Having gathered to run up a new lawn mower

, Many are faced with the problem in the preparation of the fuel mixture. And the reason for this is the disagreement in the instructions of the tool manufacturer and in the instructions of the manufacturer of motor oils. The first recommend a 1:25 proportion. The latter recommend 1:50. Who to believe? How to proceed?

According to experts, if in the instructions for a motorcycle, manufacturers write a proportion of 1:25 or 1:30, then it is most likely a cheap tool with poor cooling, or the manufacturer does not know what kind of oil will be added to the consumer. But here it must be understood that the excess of lubricant does not affect the performance of a trimmer for grass in the best way. Excess oil does not completely burn out when operating the engine. It cokes, clogs a cylinder and piston.

The main malfunctions of the coil

Users of electric trimmers and black cutters often face the problem of semi.automatic mowing. Coil malfunctions can be as follows:

The fishing line for the trimmer does not expand automatically

If the fishing line for the trimmer is not lengthened by the light touch of the trimmer button for the grass to the ground, the reasons for this may be the following.

Option 1. There was a bite, t.E. Clamping cord between turns. This problem usually occurs if the user wraps a fishing line for a trimmer to a coil unevenly with a cross section of the turns or wraps it with insufficient voltage. In the latter case, when the mower rotates at a high speed under the influence of centrifugal force, the cord begins to contract, which leads to a possible twisting of a braid fishing line. To eliminate the problem, you will have to disassemble the coil in the trimmer for the grass and correctly rewind the cord, that is, in equal speeds with good tension.

Option 2. Too short ends stick out of the head. When hitting the ground, the rod may not fall out if its ends protruding from the head are not long (short). In this case, centrifugal force is not enough to stretch the fishing line for the trimmer. Therefore, it is necessary to stop the unit (turn off the engine or disconnect the electric trimmer for grass from the mains) and pull the fishing line for the trimmer manually, first pressing the button.

Read how to lubricate the gearbox of the benzotrimermer

Option 3. Fishing line for a trimmer Spasyan inside a mower. This makes the coil stop and do not rotate when you press the button. This is mainly due to several reasons: the poor quality of the cord, overheating of the coil during continuous operation of the machine and the effect of a mowing fishing line on hard objects.

• In the first case, the lace of third.party manufacturers can be made of low.quality and fusible materials that do not withstand mechanical and thermal loads. Therefore, it is necessary to give preference to “branded” fishing.
• But if you still bought a fishing line for a trimmer of unknown quality, and it is often soldered during operation, you can follow the example of some users who, after filling the cord in the reel, moisten it or silicone lubricant (from the spray can) or mineral oil). This procedure significantly reduces the likelihood of soldering between the turns of the mowing fishing line.
• A fishing line for a trimmer can also be soldered if during a mowing it falls into a solid object (stone, fence, dry branch, etc. D.). As a result, it stretches slightly and stretches to the head at high speed. The cord heats up from friction, and its coils stick together. The only thing you can do to solve this problem is to open a trimmer to the grass and rewind a fishing line for a trimmer.

The cord involuntarily lengthens

There are situations when a user of a trimmer for grass notices very quick fishing line consumption. However, he never pressed the button on the ground to lengthen the fishing line for the trimmer. The reason that the fishing line for trimmer involuntarily lengthens, cutting off a special knife on the device case, there may be a lack of spring in a mowing head. Often beginner users of mowers, trying to charge a fishing line for a trimmer in a coil, forget to install a compression spring in the head or even lose it when opening the lid, and in the future they will not even find out about its existence.

Trimmer device for electric grass. How to disassemble a trimmer for Bosch Art 23

LED lighting lighting device for lighting the aquarium inexpensive and harsh. Bosch Art 23 SL trimmer for grass when working. How to get a lawn mower. gasoline trimmer for grass.Starting a cool lawn mower. Trimmer for grass electronic Skil 0735 AA. trimmer for grass Bosch Art 26 SL Full video

Trimmer for Forte EMK-360 grass, fishing line substitution. Malline for a summer residence from a gas balon on their own. How to wind a fishing line for a trimmer to a trimmer coil for grass. Trimmer for Bosch Art 26 Combitrim. Cheap trimmer for Bosch Art 23 SL grass. How to wind a fishing line for a trimmer to a trimmer coil for grass? Bosch Art 23 Easytrim Trimmer. Bosch Art 23 SL. How to assemble and start a trimmer for grass (motorcycle).four. Chickens for chickens.

This trimmer for the grass has no need to take a coil every time, it is very important to change the fishing line for a trimmer in an existing coil for a new ske.

Bosch Art 23 EasyTrim Trimmer according to the annotation must have a fishing line for a trimmer with a width of 1.6 mm, but this unit is perfectly transferred and a fishing line for a trimmer with a width of 2.7 mm. And it happens that I wish to note that 2.4 mm fishing line will facilitate the mowing process.

Fix the reel support 16 so that it does not spin.

Turn the coil cover 14 counterclockwise and remove.

Draw the end of the latest fishing line in other words of the refitted coil through the hole

Install a coil with a lid 14 on the support

Now you need to take 5 meters of the latest fishing line and fold in half (to find the middle). In the middle part of the coil there is a recess (in some structures. a hole), for which you need to hook our fishing line for a trimmer. There is an arrow on the coil showing the direction of winding. Fundamental detail. if the coil has two.

Many owners of garden motos are perplexed by the question of substitution of fishing line in a trimmer head. In this case, it is transformed in the whole deed, capable of bringing into a non.working state not only a tool, at the same time mowing. To prevent a similar situation, we will analyze in a stages the process of replacing the cord (fishing line) in the nozzle.

Remove the nozzle from the gearbox. For this purpose, you need to cooperate the lateral hole or the upper curly washer and excavation on the axis, stick the screwdriver and fix the shaft from scrolling. Then you can unscrew the nozzle. It should be kept in your head that the thread on the shaft has a left clipping, respectively, you need to unscrew the element, turning it to the right.

The subsequent step will be disassembling the case of this node. Usually the lid is attached through the holes-cuts using fixers. To open it, you need to drown the latch into the body and squeeze the edges of the lid. If the nozzle has an automatic or automatic line for feeding fishing line, it means that there is a spring that is when.

I wish to intend the current theme of summer residents and gardeners of the entire post.Soviet place “How to refuel a fishing line for a trimmer to a trimmer for grass”. Few trimmers auto industry in their own operating instructions answer this question. Therefore, ordinary gardeners are hard to figure out how to do it correctly.

How to use a trimmer correctly

Household trimmer for grass is the easiest to use and at the same time a very effective tool. It seems that there is nowhere easier. to include the tool in the outlet and work. But still there are some nuances that you need to know so that the trimmer for the grass works for a long time and productively.

Preparation of the site. It is necessary to carefully examine the spine area and remove all extraneous objects. stones, glass, wire, etc.D. Having suddenly flew out from under the fishing line, such an item is capable of injuring.

Installation of the cutting system. There are low.power trimmers for grass that can only work with fishing line, mating soft and juicy grass. they do not need to install a cutting system. But some models of trimmers, in which the motor has 1 kW and more power, can also work with a knife. If the site has hard weeds or even a small shoot of shrubs, you need to unscrew the nut of the working mount and install the cutting knife. Then tightly tighten the nut with a wrench.

Before starting work. It is very important when working with a trimmer to wear goggles, because even if you remove the site from garbage, the stems of plants and grass may fly into your eyes. The same stems, grass and branches can injure their hands, so it is advisable to wear gloves and gloves. We simply include an electric trimmer for grass, but the battery must be charged a few hours before work. Then, if there is a shoulder mount, we hang it on the shoulder, the ranger. on both shoulders. Conveniently wrapping a trimmer for the grass behind the handles: the D-shaped handle must be tightly wrapped in the palm of your palm, and the garden trimmer for grass with a bicycle handle (u-shaped) take strongly with two hands. A trimmer for the grass must be kept above the grass so that a spool with a fishing line or a knife is located parallel to the ground. Turn on the start.

How to mow it correctly. Rotation of the cutting mechanism is counterclockwise. Thus, in order for the cut grass to fall on the already mowed area, easily, with simple movements, we carry out a trimmer in front of us, from right to left. To remove the remains of the grass, you should make movement to another string. from left to right. If the area is even and large, break it into imaginary squares and mow it, moving on the outside of such a square. If the site is on the slope, then mowing you need to start from the bottom of the lawn, passing across the site. in one string. Having reached the edge, you need to go back and mow in the same direction, in parallel. If there are many trees on the site, mow only fishing line, otherwise you can cut the tree trunk with a knife. It is best to mow in such a garden around the perimeter, going around the tree in a circle.

Security tips

Before starting work, it will not be superfluous to make sure that you have a protective equipment. For the most part, it is safe to work with a trimmer for grass, but there is always a chance that the machine will begin to throw garbage. At least wear goggles and closed clothes. Long trousers and thick gloves are suitable for the way. Before starting work, it will not be superfluous to inspect the trimmer for the grass to make sure of good working condition.

Technique of work with fishing line and disk

The technique of work with a trimmer with a string and a disk has some differences. So, the fishing line for the trimmer cuts the grass with the very end, but with too fast the movement is used for the entire length. As a result, the stems are not cut, and the grass is wound on the cord, which is why the engine is overloaded. Therefore, you need to choose the optimal wiring speed. In addition, when mowing high and hard grass, a fishing line for a trimmer is consumed faster than when cutting the lawn.

On a note! If you need to process the slope of the hill, its peak should always be on the right. You need to rise gradually at a distance equal to the width of the scope.

There are several simple recommendations, the implementation of which will make mowing more efficient and effective.

• It is convenient to bite the garden paths, flower beds and the edges of the Lujaiks with a trimmer with an engine below. The plane of rotation of the coil of such a device can be placed perpendicular to the ground.
• Thick thickets, large weeds, bushes must be mowed with disks or special nozzles.
• When cleaning large areas, the device must be tilted to the left, in the direction of scope.
• To mow grass around flower beds, shrubs and other objects, you should rotate the head of the trimmer for the grass with a casing to them. So it will turn out to bake objects themselves and not damage them.

It should be remembered that the bobbin or the disk should not touch the ground and any obstacles except grass and branches that need to be cut off.

Care for the device

In order for the lawn mower to serve for a long time and properly, you need to perform a number of activities to care for it.

• Trimmer for grass must be stored in a dry room.
• After each use, the device must be cleaned of grass and litter.
• Air filter and a cooler radiator grille on the engine of a gasoline trimmer for the grass must be periodically cleaned by the method described in the instructions for the technique.
• It is necessary to monitor the presence of lubrication in the gearbox.
• The wires of electric trimmers should be intact, without creases and cracks in isolation. You need to include devices in the network only through groove outlets.
• All cables after use should be reelled.

If the gasoline trimmer for grass is not needed for a long time, it should be empty of the tank, let it work at idle to combat fuel residues, grease the engine. The composite bar must be disassembled, and the joints should be treated with preserving lubricants to prevent the appearance of rust. All nuances of storage and care are described in detail in the user guide, which can be downloaded in case of loss.

Electric trimmer for grass: device and principle of operation

A power cable with a fork is connected to the trimmer body for grass, through which electric current is transmitted. In the cavity of the detachable bar is a flexible shaft, thanks to which the torque is transmitted to the trimmer coil. The device is turned on by pressing the button located on the device handle.

This design of a trimmer for grass is the most common, but

If desired, you can find products working from the battery, as well as with the lower location of the electric engine.

Lower motor trimmer for grass

If the area is not very large, for example, 2-3 acres, it is better to buy a trimmer for grass with low-power electric motor (up to 400 W) installed in the lower part of the device. He is able to perfectly mow soft grass in flower beds and flower beds. In addition, this garden tool copes with delicate work perfectly. If you need to, for example, carefully cut the grass between flowers or seedlings, it will easily complete the task, as it has a rather small diameter of the rotation of a braid fishing line. Trammers for grass with a lower electric motor are also used to regularly mow grass, which is much softer than usual. They have a fairly short work schedule, and they often have to rest. It is important to remember that such trimmers for grass cannot be used to cut wet grass.

Read how to remove a coil from a trimmer for the grass Makita UR3501

Lower trimmers for engine grass are light. In addition, they are very maneuverable, t.E. The cutting surface (fishing line for a trimmer) can rotate at an angle convenient for work, and cut the grass even in almost inaccessible places. Devices with a lower engine position are very well balanced, it is very easy to work with them even with one hand. The advantages of this equipment also include their small size.

And now a few words about the shortcomings of trimmers with a smaller engine. All of them have a power of not more than 650 watts and are not equipped with steel knives.

What should be avoided

By operating a manual mower, both working on combustible and eating electricity, it is very important not to allow certain actions that can damage the device or, worse, harm the life and health of the user himself. The list of unacceptable actions is usually spelled out in each instructions for the instrument, but for convenience and clarity, we bring them in the table below.

note! To use a motorcycle on moist grass, it must have an appropriate degree of protection against moisture. You can find out about this from the guide to the tool.

So, competent trimmer care is the best way to extend the service life of garden equipment. But if there are problems that the owner cannot cope with, then the master will help solve them, although many users prefer to look for repair tips on forums and videos, shot by experienced users, technical specialists or representatives of the manufacturer.

Even relief

Visually, the lawn is broken in the crook area. Cut the grass from the perimeter of one zone, then the work continues on a tapering spiral clockwise. So they clean the weeds. Then move to the next zone. Small grass remains on top of the ground on the left.

To remove weeds under the root, the cutting part is kept at an angle of 30 degrees. The tip of the fishing line almost applies to the ground. Here you need dexterity, but the grass is removed to the bare earth.

Cutting

Equipment is needed when processing the edges of the paths, lawns and flower beds. To achieve an ideal result, a groove is digging up to 4 cm deep along the mowing line. The fishing line for the trimmer cuts grass below the level of the soil without touching the surface.

The tricks of experienced summer residents and the secrets of the high harvest that you did not know about

If the site is needed precisely cutting, it is profitable to buy an ethletric trimmer for grass with a lower engine. The cutting plane is placed vertically, the haircut is clean, without errors.

Group of slopes

Get up so that the top of the slope is on the right, process with the removal of grass to the left. After the bevel of one strip, they return to the starting point, pass the next strip, etc.D.

Circle of shrubs and large trees

In the garden or on a site with an overgrown fruit shrub, a trimmer for grass is the only convenient device for work. The scythe does not swing here, the lawn mower has too large dimensions. A trimmer for grass with a fishing line is held with a protective casing tightly to the bush, slightly bowing the head of the device to the ground. Bypass from left to right, the range of each bush and wood separately.

How to choose an electric trimmer for grass for grass?

The criteria for choosing this tool is as follows:

• The size of the lawn. In vast even areas, a traditional lawn mower shows itself better. You should not buy a trimmer for grass for their processing, since the grass will be trimmed uneven.
• Reliability of the mains. If there are problems with uninterrupted operation or current strength is not enough for the indicated power, then it is better to choose the device on the batteries.
• The dimensions of the trimmer itself for grass. If the owner of the personal plot is a fragile miniature woman, then she is unlikely to cope with a powerful and bulky device.
• Those who want to know what is better than an electric trimmer for grass for grass, it is worth reply that you need to take into account the type and size of growing on a site of plantations. Large and hard stems only cut off the knife, but the fishing line for the trimmer may not “pull” such plants.

Rating of electric trimmers

Among the most popular devices, the following brands are in greatest demand:

Trimmer for Boschelectric grass willingly buy owners of their own personal plots. This company has long established itself in the household appliances market, supplying quality products. This spit for grass also meets the stated requirements.

Bosch Art 26 SL 0.600.8A5.100

A mowing head with a fishing line with a diameter of 1.6 mm is installed on a trimmer for grass with a capacity of 280 watts. In each turning on/off the tool, the fishing line for the trimmer is automatically pulled out of the coil and cut off to the working length. This can be done manually using a special button. The width of the processing of the lawn for the passage is 26 cm. Weight. 1.8 kg. Trimmer for grass has a D-shaped handle. Brand. German, production. Chinese.

• Light trimmer for grass for effective mowing young grass.
• Automatic fishing line updating when turning on.
• The ability to use fishing line of various cross sections: circle, triangle, square, star.
• Service service. 7 years.
• Relatively low for a garden trimmer for grass, noise level. 86 dB.

Hammer ETR300

An electric trimmer for 350 watts for one pass will cover the lawn strip 20 cm wide. Elektokos is suitable for any “jewelry” work: haircuts of curly flower beds, processing lawns around various obstacles, etc.P. The device with a team direct rod has, for the convenience of work, the main and additional handles. Cutting element. nylon fishing line for a trimmer with a diameter of 1.3 mm. Max length of the extension cable (10 a). 75 m, the cable is purchased additionally. Brand’s homeland. Germany.

• Elektokos copes well with the mowing of low grass (according to customer reviews).
• 5 years of warranty
• Weight only 1.5 kg.
• Manual and semi.automatic production of fishing line tapping with a locking cap on the ground.
• Double isolation of all conductive parts.
• The average noise level is 96 dB.
• The price is pleasing.
• Dependence on the electrical wiring.
• Not intended for shrubs and thick stems of grass.
• Cannot be used for tumbling cut grass.
• High grass must be mowed in several approaches: from the top gradually decreasing to the roots.

Daewoo Dabc 1400E

A powerful ethletric trimmer for grass (1400 W) will cope well even with wet grass of various stiffness on uneven lawns, flower beds, paths, with a sharp thin branches of shrub, fine shoots. The device is intended for small and medium in the area of ​​processed areas (up to 10 thousand. m2). Combined cutting tool. a head with a 1.6 mm fishing line (various sections are possible) or a three.petal knife F255 mm. During operation, the length of the fishing line can be increased by pressing the mowing head to the ground. D-shaped handle and adjustable shoulder belt reduce the load during operation. The weight of the device is 4.7 kg. Warranty-up to 3 years. Brand’s homeland-South Korea, manufacturer-China.

• A powerful device, even copes with wet grass and small shrubs.
• The variability of the cutting tool expands the capabilities of the trimmer for the grass.
• A wide strip of spinal a passage. 420/255 mm, fishing line or knife, respectively.
• The collapsible rod is convenient for transportation and compact storage.
• Relatively low noise level. about 92 dB.

Patriot et 1000

Electric trimmer for grass (950 W) is suitable for mowing soft and hard elastic stems. Cutting tool-a fishing line for a trimmer 2-2.4 mm thick or a knife with a diameter of 23 cm. The cutting knife is mutual (can be turned over with the other side), it is not subject to sharpening. Pen-J-shaped, an additional handle is installed on the desired height depending on the growth of the operator. Quite significant weight of the tool. 6.7 kg. makes it a non.female option. The operating mode regulated by the passport is 15 minutes of the mowing/ 10 min interruption. The permissible length of the extension cord is 100 m (with a section of the wire 4 mm). Warranty 1 year. Brand Country. USA. The manufacturer is China.

• Very interesting price for a multifunctional device.
• Smooth launch from the button.
• The semi.automatic supply of fishing line is from a light blow to the ground with a pressure head.
• Protective blocking from random inclusion.
• Compact collapsible bar.
• Engine thermal protection from overheating.
• Included. tools for servicing a trimmer for grass: lacture, hexagonal keys, universal key.
• The belt carbines are quickly out of order (according to reviews).
• Unregulated rod.
• High grass is mowed by several approaches in height.

Is it possible to mow wet grass with an electric trimmer?

Many are interested in whether it is possible to operate the unit in raw weather? Experts do not advise using an electric trimmer for grass on wheels or without them in rain and fog, especially if his engine is located below. There is a great danger of getting into the water, but also a model with an upper location is better to use in dry weather to reduce the risk of short circuit and other unpleasant consequences. In addition, wet grass sticks more strongly on the cutting part, which creates difficulties during work.

• It is necessary to free the site from foreign objects that can damage the fishing line for the trimmer. stones, glass, wire, dumps and other ownerless elements
• Include an electric device in the network, and battery. charge.
• Fix the tool on the shoulder or back depending on the type of elbow and grab the handle with both hands.
• Press the button and start moving, directing the braid in front of you from right to left.
• Finish the work by clicking on the switch.
• Dismantle the braid. The best electric trimmers for grass for grass are versed and take up a little space in the barn or garage.

How to lubricate an electric trimmer for grass?

From time to time, the tool must be lubricated. Experts advise doing this every 10-15 hours. operation of the device. This is how it should be done:

• The electric trimmer for the grass for the lawn is equipped in the upper part of the case, where the gear unit is located, with a technological hole. You need to find it.
• Unscrew the screw that plays the role of the plug in the hole.
• Enter 1.5-2 ml of thick consistency into the cavity.
• Mark the shaft several times to make sure that it penetrated all the details of the gearbox. flywheel, a dog of the starter coil and bearings.
• Before preserving, electric ships for the winter should be cleaned and rinsed with gear of the gearbox, remove the previous lubricant and apply a new. Caring for the tool, you can significantly extend its service life.

How to disassemble an electric trimmer for grass?

Some owners carry out repairs of braids for grass on their own. To do this, they need to disassemble the engine:

• All screws for fastening are located on one side. By unscrewing them with a screwdriver, you need to divide the halves of the case and expose the “insides”.
• In the future, to carry out repairs, which needs a powerful electric trimmer for grass. All mechanically damaged elements with traces of exposure to high temperatures are subject to replacement.
• Fold the two halves again and connect with self.tapping screws.

How to change a fishing line for a trimmer on an electric trimmer?

The device of the head of the trimmer for grass is very similar to the design of the bobbin of the sewing machine. To replace the fishing line, make the following:

• Remove the lid.
• Gently pull out the bobbin.
• Put aside the spring, if any, and unscrew the fixing bolt in the center of the case, moving counterclockwise.
• It remains to remove the coil from the gear shaft and replace it.
• Those who want to know how to insert a fishing line for a trimmer into an electric trimmer for grass, it is worth reply that for this there is a special fossa or groove in the bastard. Having inserted a fishing line for a trimmer into it, to start wiring a string in the direction opposite to the one in which the coil rotates during operation.

Malfunctions of electric trimmers

Among the frequently occurring breakdowns can be distinguished:

• Break of power lines. Even the best electric kosa is not safe from this. Any verification of the device’s performance must be started with the analysis of the serviceability of the power circuits. Even with the confidence that there is a voltage in the outlet, the case may touch the extension wire to the wire of the wire.
• The failure of the engine, which was exposed to high temperatures. Overheating of the “heart” of the instrument is the most common cause of the mowing of the mower. It is indicated by the emerging holes of the cylinder and piston from the final canal, the destruction of the piston ring, a change in coloring. To prevent such unpleasant consequences, it is necessary to take breaks in work and timely clean the knife from the remnants of the grass.
• Normal work at idle and its termination during load. Perhaps the reason lies in the clogging of the air filter. During operation, garbage, particles of dust, dirt, so it must be cleaned from time to time.

Why is an electric trimmer to heat up for grass?

The reasons can be very different. An electric small trimmer for grass for grass with small power and lower engine location is heated very quickly, especially if it is mercilessly operated. As a result, its details melt and flow, disableing the entire tool. There are many such “kulibins” that independently install a thicker fishing line for a trimmer on a braid, mount knives, chains, and then wonder that the device “does not pull”. All of them create an increased load on the engine on which it is not designed, therefore, overheating and breakdown cannot be avoided.

Gas heater. equipment for heating a room in which there is no centralized engineering highway. Differ in the type of heating element and are operated in dachas, garages, summer kitchens, etc.

Electric kettle. an indispensable attribute in every kitchen. There is a big plus that by turning on the device, there is no need to follow it and wait until it boils to turn off. Everything will happen automatically and it remains only to use the finished boiling water.

Geyseric electric coffee maker. a device that ensures the preparation of the drink due to a pressure created by the steam when heating the water. The unit is easy to manage, is convenient to care for and does not take up much space in the kitchen.

Stylish hob of gas panel allows you to equip the kitchen space as functionally and aesthetically aesthetic as possible. Due to the lack of binding to the oven, this type of household appliance can be installed in any suitable place.