How to tuck a wire into a lawn mower. Nuances of fishing line replacement in trimmer

Learning to correctly wrap the fishing line for a trimmer to the coil of a trimmer for grass and lawn mowing instructions for installation

Owners of private houses know how necessary the type of tool is such as a trimmer for grass. It can be gasoline and electric, and they differ in the design of power units. For injection of grass in areas where there are stones, trees and other obstructing objects, a fishing line for a trimmer is used as a cutting device. This consumable in the process of use wears out, so how to wind the coil of a trimmer for grass, we will consider in detail in the material.

Fishing lines is called consumable, which consists of nylon, and serves as a cutting device. Through this equipment, the grass grows, which is ensured due to rotation of the instrument head with a high frequency. This material has a different thickness, which depends on its use on the corresponding tools of low-power (from 1 to 1.6 mm), electric from 500 W (2-2.4 mm) and gasoline trimmers for grass with motorcycles (from 2.4 up to 3.2 mm).

The more powerful the tool, the accordingly there should be a cutting equipment. This affects not only the quality of the injection of grass, but also on the life of the material. If you ask the question of how to wind the coil of a trimmer for grass, then it’s time to change the reload of the tool. With the onset of spring, this issue is becoming more and more in demand, so it’s time to understand the step.by.step instructions for replacing the fishing line in the coil of the trimmer for grass.

How to remove a coil from a trimmer for grass and extract a fishing line for a trimmer

Initially, before filling the fishing line for the trimmer to the coil of the trimmer for the grass, it is necessary to extract it from there. Coil or tip is a device that is located inside the braid, bobbin or drum. The heads are of different types (depending on the manufacturers), however, the principle of replacing the fishing line on the coil has the same. First of all, we will figure out how to remove the head from the tool, as well as how to get a drum with a fishing line from it.

It is interesting! The replacement of equipment can be done directly on the tool, but if you do it for the first time, it is still recommended to remove the head, and study the detailed process of winding. After the technology is mastered, you can perform work on replacement on a trimmer of a motorcycle or a gas station.

Instructions on how to promote a hand head on a trimmer, has the following look:

This process is not difficult, and as you know, it is not necessary to dismantle the entire head if you know how replacement is performed. When dismantling, consider the following nuances:

• It is recommended to remove the head periodically to prevent the corrosion of the threaded connection. If you never unscrew the screw, then if necessary to do it will be difficult and even sometimes impossible
• If the screw has a tetrahedral boring of the head, then for twisting you should select a screwdriver or bit of a suitable size to eliminate the licking of the faces on the head
• When assembling the installation, a threaded seat should be treated with lubricants, for example, solidol or machine oil
• If the edges on the screw are licked, then for its unscruptions you can use special clamping forceps
• There are drums that do not require preliminary disassembly. To dismantle them, you should take up it, and rotate in the opposite direction of the direction of the clockwise

Knowing how to disassemble the drum, you should continue to clarify the process of replacing a trimmer fishing line for grass. Below the video shows a detailed process how to open a trimmer coil for grass and disassemble it.

Reviews about trimmer for grass gasoline hopper farmer-052

Advantages: powerful, comfortable in hand, not heavy.

Disadvantages: the quality is terrible. During the year of operation, the piston was changed twice, four times the starter. Constant problems with carburetor. In short, they repaired more than worked.

Comment: I will not advise anyone hoper. Before that, Interskol was (and stayed). worked and works at all without problems. We decided to take something ramps and really regretted it.

Advantages: Power of the biceps belt pissing rod

Comment: The device is just a beast. Power is enough for everything. When the trigger presses you immediately feel how powerful it is. At the first acquaintance with Khopom, they said that everything is crumbling. Will start several times and then from the thirtieth. And so on. As a result, he examined everything well, did not listen to anyone and took a chainsaw from Hopra. After two.year use, definitely a hoper if the technique is suitable for needs. And buying a trimmer for grass generally pleased. There were many devices in their hands from different manufacturers. So I can recommend confidently. P. S. Just remember that you take a gasoline tool, not a kettle. Here is not only the button on.-Off., but also proper maintenance. The correct first launch, running.in, lubrication, cleaning, etc. D. All successful purchases!

Disadvantages: Assembly is bad. Half of the bolts are not swept. Fuel tank separate topic. For a year of use, changed three times. First time under warranty, then I bought separately. All three times the tank burst in the same place. The quality of the plastic tank is disgusting. The tank is suspended by only two bolts and brackets. protection of the tank is a plastic corner. After the first replacement, the tank bought enhanced metal protection, but she also did not help. The fuel tank bursts from the vibration of the braid for grass at the mounting site to the engine body.

Comment: This braid for grass was repaired more than worked. I don’t advise buying this braid.

Advantages:.comfortable (biceps belt).Powerful (grass to waist. In dust)

Flaws:. The resource of motorcycles is only 150 (like Huskvarny 600-). If something opens, I will complement.

-They scared that high grass to the waist would not be reimbursed by a trimmer, because everyone has everything wound up on a gearbox. Nonsense, any grass, any burdocks in dust and dust waves. _.Scared that he eats a lot, all the same 3 liters.With. Nonsense, tank here 2l. And for 3 tsenzil, all that was needed (half of the football field), and the grass was really in Posyas. Husqvarna’s neighbor 2 l.With. Eats the same. Scared that cheap and fall apart, everything will bounce. No, everything is tightly screwed and in general, I constantly beat her for bricks and wound the sticks and benches on it)). Nothing fell off. A crack appeared on the coil after I wrapped some kind of metal cable in the grass as a gearbox. But the crack is not significant, then it never went. Friends have been mowing such a mower for a year. Everything is good for them.

https: // jusof.COM/Katushka-dlja-Trimmera-PA6-30gf-Kak-Razobrat/https: // Poryadok.ru/catalog/katushki_leski_dlya_trimmera/https: // otziv-otziv.ru/Katalog/Trimmery/Hopeer/Trimmer-Benzinovy-Hoper-Fermer-052.HTML

Installation of a new fishing line on the coil of a trimmer for grass

Equipping the coil with a new fishing line is performed in the reverse order. The procedure looks like it is described below, regardless of the model of the lawn mower:

Step one: fixing and styling

Fold the end of the fishing line in half. Place the workpiece above the coil on each side of each half of the winding area. Wrap both halves completely around the winding drum. Stretch the fishing line for the trimmer through the loop.

The procedure for preparing fishing line in the field of both wound sections of the drum. The loops are laid in specially made cutouts, after which the winding of the fishing line is performed in each area

Pull the fishing line for the trimmer enough and put the knot in the groove made on each side of the winding drum.

Step two: winding cutting material according to sections

The next step is to turn the fishing line in a circle of coil, observing caution. It is necessary that each half be filled with “its own” winding, exactly, without intersections. Usually on the hull of the winding drum you can see the arrows indicating the direction of winding. This moment should be borne in mind, filling the reel with a fishing line.

Step Three: The Club of the Head Noner

Stretch the ends of the fishing line through a pair of oval cuts of coil. Replace both goals and a spring (if any in the design) with new elements included in the package. Bend both ends of the fishing line at right angles.

The last technical stroke of the process of replacing the fishing line on the trimmer is to put the cover on the head with subsequent fixation by pressure and slight turnover.

Let each end into the hole, which is at the base of the winding drum. Install the coil in the inner area of ​​the head with an emphasis on the spring. Put the lid, leve on the base and light pressure down with a small rotation counterclockwise, put the cover on the tongues of the latch. This is where the replacement procedure is completed.

Installation of a new fishing line on the coil of a trimmer for grass

Equipping the coil with a new fishing line is performed in the reverse order. The procedure looks like it is described below, regardless of the model of the lawn mower:

Step one: fixing and styling

Fold the end of the fishing line in half. Place the workpiece above the coil on each side of each half of the winding area. Wrap both halves completely around the winding drum. Stretch the fishing line for the trimmer through the loop.

The procedure for preparing fishing line in the field of both wound sections of the drum. The loops are laid in specially made cutouts, after which the winding of the fishing line is performed in each area

Pull the fishing line for the trimmer enough and put the knot in the groove made on each side of the winding drum.

Step two: winding cutting material according to sections

The next step is to turn the fishing line in a circle of coil, observing caution. It is necessary that each half be filled with “its own” winding, exactly, without intersections. Usually on the hull of the winding drum you can see the arrows indicating the direction of winding. This moment should be borne in mind, filling the reel with a fishing line.

Step Three: The Club of the Head Noner

Stretch the ends of the fishing line through a pair of oval cuts of coil. Replace both goals and a spring (if any in the design) with new elements included in the package. Bend both ends of the fishing line at right angles.

The last technical stroke of the process of replacing the fishing line on the trimmer is to put the cover on the head with subsequent fixation by pressure and slight turnover.

Let each end into the hole, which is at the base of the winding drum. Install the coil in the inner area of ​​the head with an emphasis on the spring. Put the lid, leve on the base and light pressure down with a small rotation counterclockwise, put the cover on the tongues of the latch. This is where the replacement procedure is completed.

Typically, the process of replacing fishing line on a trimmer of a particular model is popularly described by accompanying documentation. Another question is that this documentation is often supplied in a foreign language, since the notorious lawn mowers for the most part are imported products.

Meanwhile, there is a much simpler, more economical and healthy way for human health and nature. putting the lawns of an ordinary peasant oblique in order. Blory of braids for grass:

which is subsequently accompanied by abundantly growing greens, and not by the formation of dryness as a result of the work of a trimmer for grass.

Brief briefing

Z-Zila-publications of materials interesting for society. News of technologies, research, world.class experiments. Social Multi-Tematic Information-Media.

Instructions

In order to change the fishing line for the trimmer, it is necessary to extract the old one (if it was).

The coil is part of the design of the trimmer for the grass, which is located inside the head of the motorcosa, drum or bobbin. Depending on the manufacturers of the head can be different. But this article discusses only Patriot, although their mechanism is used by many other companies.

Now you need to understand how to properly remove the head from a trimmer for grass and how to get a drum out of it.

Instructions on how to promote a hand head on a trimmer is described below.

• First of all, you need to clean the head of dirt and adhering grass if it is contaminated. To do this, you need to raise a motorcycle head up and, holding the casing, remove a special protective cover dressed on the drum.
• The next step needs to remove the reel from the drum. The coil is easily removed even with one hand, because it is not fixed inside the drum.
• The drum itself is fixed in the trimmer with a bolt. This bolt must be unscrewed, after which you can easily pull out the drum. To do this carefully, you should support the drum with a coil, while twist the screw counterclockwise.
• Now you can pull the coil out. As mentioned above, it is not fixed in anything except a hook with a metal shaft, so it does not need to be torn off with force. Neatly, in a circular movement you should pull the coil from the drum.
• Now it remains to extract an old fishing line for a trimmer and follow the following instructions.

Installation of the coil and drum in its former place is performed according to the opposite algorithm.

Before the process of refueling the fishing line, it is worth making sure that the thread suitable for a trimmer was bought. In the case when the thread is not suitable, the fuel or energy consumption increases, as well as the load on the motor motor.

In order to replace the thread itself directly, you need to prepare a piece of thread of the required size. Most often, this requires about 4 m fishing line. A specific figure will depend on the parameters of the thread, for example, its thickness, as well as on the parameters of the coil itself. If it is not possible to accurately determine the length, it can be done as follows: insert and wind the thread to such a state that the coil is completely charged (the level of the fishing line will be compared with protrusions in the sides of the coil). It is necessary to ensure that the fishing line for the trimmer sits in the coil exactly.

Do not forget that the thick thread will be shorter than thin.

The instructions for refueling the fishing line in the coil is described below.

• The prepared thread must be taken and turned in half. It should be ensured that one edge is longer than the other by 0.1-0.15 m.
• Now you need to take the ends in different hands. The one that is smaller must be pulled to more, so that it becomes 2 times shorter. When bending, the indentation should be maintained at 0.15m.
• Find the slot inside the coil partition. Carefully prick the loop that turned out earlier in this slot.
• To continue work, it is necessary to determine the direction of winding the thread in the coil. To do this, just examine the coil. there should be an arrow on it.
• If the gunner could not be found, it is quite possible that there is a written designation. An example is given in the photo below. It is necessary to inspect the head of the coil. It has a direction indicator. However, this is the direction of the coil movement. To get the direction of winding, you need to wind in the opposite direction.
• Now you need to season the reel with a fishing line. It is worth noting that there are special guide grooves inside the coil. When wrapping a thread, you need to follow these grooves, otherwise you can damage a trimmer for grass. At this stage, you need to charge the coil very carefully.
• When the user winds up almost the entire thread, you should take the short end (do not forget about the protrusion of 0.15m) and stretch it into the hole located in the coil wall. Now you need to repeat this action similarly with another end (on the other hand).
• Put the coil itself in the coil head, before that, extinguishing a fishing line for a trimmer through the holes inside the drum.
• Now is the time to return the drum to your place. After that, you need to take with both hands by the ends of the fishing line and pull them to the sides. Then you need to put the lid in place (here you can safely make efforts until a characteristic click is heard).
• Remained to perform “cosmetic work”. You need to see if the thread has come out too long. You can start a trimmer for the grass and check in practice whether everything is comfortable. If the thread came out a little long, you can cut it with scissors.

Frequent errors

Although the winding of the fishing line is a very simple task, many newcomers can wrap a fishing line for a trimmer incorrectly. The most common errors are presented below.

• Many people when measuring the thread think that 4 m is a lot. Because of this, people often measure less, and they, accordingly, do not have enough fishing line. Do not be afraid to measure a lot, because you can always cut off the excess.
• In a hurry, some people do not observe the gas stations inside the coil and wind up the thread like it. This leads to the “departure” of the fishing line from the coil and can even cripple.
• For winding, it is worth using only the corresponding fishing line for the trimmer. This error is most common. You need to monitor not only the thickness and volume of the fishing line, but also your type. You should not use the first fishing line for a trimmer for wrapping, which will not match the goals. For example, you do not need to use a thread on the young grass, if it is necessary to mow dry.
• Do not turn on the device until complete winding and collection. Although this is obvious, some people do this in order to check if everything is done correctly.
• In no case should you confuse the refueling direction, as it will overload the engine, and it will soon get out of the working condition.

Beginners are quite characteristic of mistakes, so it is necessary to observe the advice given in this article.

The choice of fishing line

In order to easily wrap a fishing line for a trimmer to a trimmer coil for grass, it is worth deciding on what tasks the garden tool will perform. The thicker the thread tucked into the head, the more difficult the tasks that it can complete. It should be noted that a universal thread is often used, the width of which does not exceed 2 mm. You, in turn, can decide on the size, using the following methods:

• get acquainted with the information set out in the instructions from the manufacturer;
• check the suitability of the fishing line for use on your own, trying to insert it into the coil hole;
• study the spool for information about diameters allowed for use.

Selection of fishing line for refueling a trimmer for grass can be carried out by engine type. So, for example, an overly thick thread can affect an increase in rotational resistance. Because of this, the load on the engine will increase, which will certainly affect the quality and timing of its further operation.

Avoiding negative consequences is easy. To do this, it must be borne in mind that for electric motors with a power of up to 500 W, a fishing line for a trimmer with a diameter of up to 1.2 mm is ideal. If you cannot get such a thread, you can use the cord by 1.6 mm. A thread with a diameter of 2 mm, in turn, is used for engines with a power of more than 1 kW. It is worth noting that the cord for 2 mm is often used for winding on a bent mower. If the gasoline device has a straight shaft, the thread should be used 2.5 or 3 mm. The thickest fishing lines are installed exclusively on devices, the power of which is equal or exceeds 1.3 kW.

The last, but no less important factor is the type of fishing cross section. When choosing it, it is worth focusing on the tasks set before the garden tool. There are several demanded cross.sectional options:

• twisted-has a small margin of safety, which is why it suits exclusively for young grass;
• Substitute. is characterized by sharp edges suitable for working on overgrown weeds;
• Round. the most common section. Such fishing lines cope well with fresh grass, but they are not suitable for shrubs and dry ones;
• rectangular, square and star type of cross section-due to low strength, are used to work on lawns.

The most durable and universal cord is a two.component fishing line for a trimmer with a round cross section, inside which the core is located. It is this thread that is suitable for the majority of work. It must be remembered that the use of fishing fishing line, ordinary wire and other third.party materials as a cord pose a danger to others.

Removing and disassembling the coil

In order to correctly wind the fishing line for a trimmer to the coil of a trimmer for grass, you must familiarize yourself with the structure of the trimmer head. It consists of a protective casing, a bobbin with a thread, a hull cover, as well as a spring that is present only in some devices.

Starting to disassemble the coil, you must completely turn off/de.energize the device. In this case, the method of work directly depends on the type of head. The first option is to conduct the following actions:

• The user presses on fixers located on both sides of the cover.
• After removing the lid, the spool is extracted. Some models may have a spring, which also needs to be extracted.
• A screw is located in the center of the case, which should be unscrewed with a regular screwdriver.
• When the fasteners are removed, it remains to remove the gearbox from the shaft, gently shaking the case of the product body.

The second option for removing the coil for refueling the fishing line in a trimmer for grass is to tighten the head for the gearbox shaft. To carry out such a procedure, many devices are equipped with a hole into which you can insert the tool. When the screwdriver is inserted, the user can only take up the product body and scroll it clockwise. It is noteworthy that this method, in contrast to the previously described method, differs in the simplicity of execution.

How to choose a fishing line for a trimmer for a trimmer for grass

The trimmer for the grass bought in the store is already ready to work. a standard nylon fishing forest is tucked into it. She cuts the grass, but does not cope with work poorly. only young, thin plants quickly fail and mows. She does not take old grass and weeds with stem stems or cuts off at all, wear out quickly. It grabs it for a short time, after which you need to replace the fishing line for a trimmer in a trimmer.

It is not recommended to use a fishing fishing line for a trimmer, it is better to take a special thread with a fiberglass core. It is sold in construction stores. Stop your choice on an option that has a square or triangle in a section. their sharp edges will work like knives.

Fishing line consumption for a trimmer for grass using faceted and reinforced consumables will decrease by 2-3 times, performance will increase by the same amount compared to the circle of round section and fishing line not reinforced with fiberglass.

Purchase material with a diameter not less than recommended by the manufacturer. If the diameter is unknown, you need to look at the size of the holes on the outer body of the mowing head: the diameter of the working thread should be slightly smaller than the hole to pass through it freely.

Buy a sufficient supply of cutting thread (with 2-3 replacements), try to buy different options to compare which one is best in work.

Upon learning how much material is needed for one winding, focus on the length of the forest during the next purchases, so that there are no too short for winding pieces.

To replace the forest on a mechanical spit with your own hands, you need to disassemble the braid head and get the coil on which the working thread is wound.

How to remove a fishing line for a trimmer

To replace a fishing line for a trimmer in a trimmer, remove the head cover. To do this, press the fingers of the latches of fixers located on both sides of the lid, and pull the lid up. Access to the coil will open. After that, pull it out, pulling up the axis on which the coil sits. If the ends of the fishing line stick out from the holes of the head, then lift the coil along the axis and pull the remaining fishing line from the holes of the head. Now the detail does not hold anything and it is easy to remove and remove the remaining working thread.

The coil is divided into two parts by the central partition with a neckline. Different models of cobs differ in size, so you need to check how much you can wind the fishing lines on the bobbin. Its length ranges between 1 and 4 m.

Preparation. remove and disassemble the rogue

In most models of electroly and benzotrimmers, to replace the fishing line, you will need to remove the coil. FUBAG tool (electrimmers and benzoprimers) allows you to skip this stage. For the instruction to be universal, we will still consider it in detail:

one. Fix the shaft. Insert a stop element into the corresponding hole. They may be a thin screwdriver or a metal rod.

Unscrew the spool body. In our example. strictly in the direction clockwise.

Unscrew the lid in accordance with the direction indicated on the case.

The preparatory stage has been passed. You can go to the winding of the fishing line.

How to wind a fishing line for a trimmer to a trimmer coil for grass

First determine the length of the consumable for your reel. Wrap a fishing line for a trimmer on a bobbin until it staches for the sides. We got 4 meters. How much will it work with you depends on what diameter of the fishing line for a trimmer for a spool and design features.

Winding algorithm

Lay the fishing line for the trimmer in accordance with the indicated direction on the element case.

Insert the short end into the groove on the side of the coil.

Fasten the long end in the opposite groove.

Place the coil with a wound fishing line in the spray building.

Cut the ends of the fishing line, leaving 10 to 15 centimeters.

The replacement of the fishing line is completed and now it remains only to fasten the bobbin on the trimmer for the grass and you can work.

Additional recommendations for the replacement of fishing line

Before charging a fishing line for a trimmer to the coil, you should use several tips of manufacturers. They will be interesting not only to beginners, but also to experienced owners of trimmers.

These recommendations will help prevent people’s injury and extend the life of the equipment:

• You can not wrap the thread with effort and tightening, in addition, use a large length than expected.
• After replacing the fishing line, you should check the performance of the unit.
• The lid should be installed to characteristic clicks. If at least one latch does not snap, the coil may jump out during operation.

Important! The mowing of grass should be carried out in special glasses and costumes, since small objects that can fly and injure others fall under the rotating parts of the mechanism.

Now you know how to put a fishing line for a trimmer on a trimmer for grass, and you see that in this work there is nothing complicated. It is important to choose the right consumer material and replace it taking into account our instructions. Soon all your manipulations will be worked out before automatism.

Share in the Комментарии и мнения владельцев if there were difficulties in replacing the cord or did you deal the first time.

To study in more detail the process of how to quickly and simply refuel a fishing line for a trimmer to the coil of a trimmer for grass, the following will help

How to wrap it up?

Knowing how the coil is disassembled can accelerate the process of replacing the fishing line. It all depends on which structure the coil has and how many antennae. Turn the thread into the coil, which has only one working mustache, is quite simple, especially if you adhere to a sequential plan.

Depending on the parameters of the bobbin and the length of the fishing line, it is recommended to choose a string from 2 to 5 meters.

First you need to remove the bobbin from the tool, and then open it.

In the hole inside the bobbin, it is necessary to install one of the ends of the fishing line.

Next, the string should be wrapped on the drum. over, this is done in the opposite direction from the usual rotation of the spool. Typically, on trimmers on the inside of the bobin there is an arrow that shows in which direction you need to wind up.

Part of the fishing line must be pulled out and fixed in a special puzzle located on the inside of the bobbin. Its purpose is to maintain winding when bringing a bobbin to working condition.

The end of the string must be put into the hole located on the outer part of the bobbin.

At the last stage, it is necessary to collect parts of the bobbin and put on the barpet on the bar.

Installing the fishing line on a coil with two mustache in a slightly different way. First you need to determine how many grooves passes along the inside of the coil, on which the fishing line for the trimmer is put. There are options with one groove, and then both mustache must be wrapped together. There are also models with two grooves, when each of the mustache goes along a separate.

For all coils with two mustache, it is recommended to use a string with a length of 2 to 3 meters.

In a model with one groove

The fishing line for the trimmer must be stretched into the hole, and its mustache should be folded together and aligned.

Then winding in the direction opposite to rotation of the bobbin on a mower is carried out. Often there is an arrow inside the coil, indicating how to put a fishing line for a trimmer correctly.

The ends of the string are fixed in special passes or simply temporarily adhere to with their hands and drawn into a hole located on the outside of the bobbin.

After that, the spool is closed and attached to the bar, after which the mitch is ready to work.

In the option with two grooves

The fishing line for the trimmer is first folded in half to determine where the middle of the bend.

Further, the loop formed on the bend is threaded into the groove, which is formed between the two grooves.

After that, you can wrap both mustaches of the fishing line on a separate groove.

You can fix the mustache and collect the coil in the same way as already described above.

For the first time opening a coil and wound a new fishing line for a trimmer is not always easy. Over time, this procedure becomes almost automatic and will not take much time. Some coils have an automatic system that independently wraps a fishing line for a trimmer. As a result, it remains only to correctly correct the end of the fishing line, and everything is ready. In such models, the string must be put on a hole that is on the outer part of the case. Further, Bobina is assembled, and when the winding rotates, then there is a fishing line on it.

The convenience of such coils is that it is impossible to incorrectly perform the winding, since the fishing line for the trimmer will always spin only in the right direction.

Safety precautions

Compliance with safety precautions will allow you to quickly and safely insert a new fishing line for a trimmer into a coil on a mower. Be sure before the replacement begins and the coil will be removed, you need to turn off the device, especially this applies to electric lawn mowers. It is important to constantly remind yourself of clicking on a special blocking button. On each mower it can be located in different places, but this is necessarily indicated in the operating manual.

Remember the adjustment of the cutting element. Otherwise, the work will be unstable and low.quality. Most often, there is a button on the unit itself, which allows you to configure it. If, when you press it, nothing happens or the string weakened its tension, then you need to clamp the button and pull the fishing line for the trimmer from the coil with force.

Fishing winding is a very responsible process. It is important to follow all the stages to correctly pull the fishing line for the trimmer. Other materials should not be used, except for special nylon strings. It is worth remembering that it is impossible to put a wire made of metal, rod or iron cable instead of fishing line. This is dangerous, since equipment can very easily cut shoes even from rough material and injure to the one who uses a scythe. Before wearing a new fishing line for a trimmer, it is important to carefully read the instructions for the operation of the device, since some models of lawn mowers can have their own structural features, which are important to consider when replacing.