How To Tuck Line Into The Oleo-Mac Trimmer

If I did not have you. Electric braid “Oleo-Mac TR 95 E

A trimmer in the country is not a luxury, but an urgent need. The grass grows by leaps and bounds. A cultivated plant needs to be cared for, cherished, fed, and the grass grows in any conditions. Heavy rains every day, like this summer, drought, heat. nothing to her. It is only getting greener, higher and thicker.

Therefore, as without a pumping station that provides water in my area (There is no life without it at the dacha. Pumping station “General PUMP GP. 801 / A5”), and without a trimmer, I cannot imagine my dacha life.

Electric scythe (trimmer) “Oleo-Mac TR 95 E”. Country of origin Italy. Assembly. Italy.

Main settings:

  • single-phase electric motor;
  • power 950 W;
  • weight 3.4 kg;
  • noise level 87 dB;
  • cutting element. fishing line;
  • line diameter. 1.6 mm;
  • cutting width. 38 cm;

Benefits:
1. For safety reasons, a wide protective cover, cable lock, double winding insulation and overhead motor are provided;

A thermal relay turns off the engine in case of overheating and power surges and prevents damage to the trimmer;

The aluminum rod is very lightweight and does not corrode. The bar is curved, which makes it possible to mow grass in hard-to-reach places;

There is a strap for hanging the trimmer, which significantly reduces stress and fatigue during long work;

Semi-automatic spool “Tap ‘n Go” releases the ends of the line during mowing without interruption in work by hitting the ground;

Spool with line, nylon head and line cutter

In order for the line to be fed in semi-automatic mode, it must be properly wound. Everything is extremely simple: two pieces of fishing line, each about two meters long, are inserted into special holes on the spool, wound in the direction of movement of the arrow, then the spool is inserted into the spool. The free ends of the line are passed through the holes on the spool. A nylon head is screwed on top, which presses the spool spring and the spool itself to the spool. The head is twisted counterclockwise. Then you need to slightly pull the ends of the line. Done. If the line is too long, when the head rotates quickly, it is cut against the knife.
6. For convenience, the handle has a D-shape, and the rod is adjustable to the user’s height with the help of a quick-clamping wing. The handle easily moves up and down the bar;

Thanks to the electric motor, the trimmer does not emit exhaust gases.

I got a trimmer in 2013 as soon as I bought a summer cottage. The grass on the site was waist-deep, I already wrote that the site was badly neglected. The electric scythe is quite powerful, the line easily mows not only the grass, but also the growth of raspberries and cherries. With the help of this trimmer, I easily cleaned the entire central part of the site from thickets of grass and small growth and it became possible to move around it.
Tall grass with a tough stem, such as canadian goldenrod, must be cut in two steps. First, we mow the upper part, approximately to the middle, then the lower one, almost at the root.

What was my guide when choosing a trimmer? I needed a fairly powerful electric scooter, lightweight, with an overhead engine. Why top? It is convenient, you can mow wet grass. This cannot be done with a lower engine location, in order to avoid moisture ingress on the motor winding and its further failure. This is the situation with this summer. It rains every day, but you need to mow, the grass is higher and higher.

It rained an hour ago, the grass is still wet

For my trimmer, this is not scary. You can mow

I have a small mowing area. The entire free area of ​​my small plot of 3.5 acres is set aside for a vegetable garden. Therefore, I mow the grass only around the perimeter of the garden and near the bushes.

The trimmer cuts fairly low and clean. As you can see, even near the edge of the greenhouse, I mowed almost everything. And where the electric scissors do not work, I finish the cut with battery scissors (Small but effective assistant. Battery scissors).

The duo worked here: they mowed with a trimmer near the bush, battery scissors worked under the bush.

I do not feel any vibration during mowing, the noise is not very strong, it buzzes and buzzes. I mow my land within an hour, and during this time I still have time to mow beyond the territory of the site and the road, so that it is more comfortable to walk.
This time we managed to mow only near the greenhouse.

It started raining again

I urgently had to run to shelter, it is strictly forbidden to mow with an electric trimmer in the rain in order to avoid damage to the electric motor and electric shock.

The trimmer has been working reliably for me for the seventh year. over, not only I use it, but also a neighbor periodically asks for a mowing of his plot. I do not refuse, we help each other, and not only with technology.

If I didn’t have a trimmer, I don’t know how I would cope with the grass growing by yeast.?!

The only drawback of equipment with electric motors is that you need to carry an electric cable with you everywhere. When mowing, it is necessary to control so that the wire does not accidentally fall under the line.

I have two extension cords: one 20 meters, the other 15

The section is elongated, and in order to mow its distant part, I connect one extension cord to another. This has a certain inconvenience. However, I do not consider a gasoline trimmer for my small area at all. The neighbors on the left once mowed with such a trimmer near their plot, the smell from the exhaust gases reached me, although I was 20 meters away from him. Now they also mow with a trimmer, they abandoned the use of gasoline.

I am very pleased with my trimmer. If it were not for him, it would be difficult to manually fight the grass. This tool makes my dacha life very easy. In my personal rating of the necessary country equipment, it is in second place after the pumping station.

How to replace line in any trimmer

Technological progress provides us with a lot of opportunities to get rid of manual labor. This includes, among other things, mowing grass, which required a lot of physical energy when using a conventional scythe. In modern conditions, this process is much easier, because the applied technique minimizes all costs. Devices such as electric and petrol trimmers have firmly taken the place of irreplaceable assistants in gardening. Mowing grass with their help has become more fun than hard and exhausting work.

Structurally, the trimmer consists of an engine, a bar and a working body, which, depending on the vegetation being cut, is either a mowing head or a milling disc. And if everything is more or less clear with the cutter, then sometimes questions arise with the nozzle. As a rule, they appear when the line ends.

How to properly wind the line on the reel? Understanding.

So, first unscrew the nozzle. This should be done by rotating the drum to the right. Here we have a drum with the remnants of an old fishing line in our hands. We open it. Most often, the lid is closed with latches that can be opened with a screwdriver, threading it through the holes and slightly pressing. Or you need to squeeze the latch and turn the cover in the direction of the arrow. In this case, the lid itself must be held, since reels with automatic line feed have a spring that, when straightened, can throw out all the inner parts of the drum. Gently pulling out the reel, remove the scraps of fishing line from it.

Now you need to take 5 meters of new line and fold it in half (to find the middle). In the middle part of the reel there is a notch (in some designs. a hole), for which we need to hook our fishing line. There is also an arrow on the spool showing the direction of winding. An important detail. if the reel has two compartments, then one half of the line should be wound in one direction, and the other in the other. When finishing winding, you need to leave 15-20 cm of fishing line free. There are also two notches on the top ring of the coil, through which these free ends need to be passed. We dealt with the winding itself.

The last step in the line replacement process is to assemble the drum. First you need to install the spring and washers in their place. Then, holding the reel with one hand, with the other you need to thread the ends of the line into the corresponding holes on the sides of the nozzle. After that, install the coil in its place, pulling the line and being careful not to dislodge the spring. When all the internal elements of the nozzle take their places, you can close the drum with a lid. You just need to make some effort to ensure that the latches fall into place. Voila! The mowing head is ready for use!

How to tuck line into the trimmer: a few simple tips

Thanks to modern power tools, a person is given a lot of opportunities to reduce manual labor. These innovations include the trimmer, which greatly facilitates the process of mowing and lawn care. This device reduces the time for gardening work, turning difficult physical work into entertainment. The trimmer uses a fishing line as a cutting tool. It stretches strongly and thus mows grass of almost any height. It is quite easy to operate a power tool, but the problem arises when the cutting material runs out. Not everyone will immediately figure out how to tuck the line into the trimmer. Although this is a simple operation, it is not always clear to a person who is faced with this task for the first time how to properly wind it on a reel. over, the instructions do not contain information on how to choose and replace the trimmer line.

How to quickly and correctly tuck the line into the trimmer?

Once you figure out how to change the cutting material, further use and maintenance of the trimmer will be greatly simplified. To wind the trimmer line, several operations should be performed, namely:

  • Unscrew the nozzle by rotating the drum to the right. You will have a head with the remnants of an old thread in your hands. Open it with a screwdriver, or wring out the latch and turn the cover in the direction of the arrow. This operation should be carried out carefully, since there is a spring inside, which, straightening, can throw out all the internal parts of the drum. To change the line in the trimmer, you need to take out the spool and remove the rest of the material.
  • Take 5 meters of new thread and fold it in half. There is a hole in the middle of the spool where you need to insert the material. There is also an arrow indicating the direction to reel in the trimmer line. It is important to consider some points. If there are two holes in the spool, then half of the trimmer line should be tucked in one direction and the other in the opposite direction. When finishing inserting the material, it is better to leave 15-20 cm free.
  • Assemble the drum, reinstall the spring and washers. Then, while holding the spool, thread the ends of the line into the holes on the sides of the nozzle. Then put the head back in place, tightening the cutting material.

The most common line replacement on an OLEO-MAC reel

The trimmer is electric, easy to use. Video how to wind a line on a reel, a similar winding.

tuck, line, oleo, trimmer

Non-automatic reel with one tendril

Semi-automatic single section reel with 2 antennae

If the line on the trimmer has 2 antennae, then before winding the string is folded in half, shifting the edges by 5-10 centimeters. Bobbins come in a variety of designs, but each has some kind of hook to secure the middle of the cord. If the bobbin is one-piece, then there is a hole where you need to thread one end of the line and center it again. The two-piece coil has a cut-out in the bulkhead.

Wind-cord and winding direction arrow

The inscription “Wind kord” and an arrow show us the direction of winding. If there is no arrow, then we wind it in the direction opposite to the direction of rotation. With one hand we hold the edges of the cord, and with the other we rotate the bobbin, winding line, each side to its own path. We lay the string tight enough, ideally exactly unnecessary, the main thing is to prevent intersections. She herself, during work, will take the right place. When there are 10 centimeters left, we fix the edges in the slots. We pass the string through the holes on the coil body. Alternately, lightly twitch the line so that no loops form inside, and insert the bobbin into the spool. Then we assemble the mowing reel. Sometimes there is such a design of the coil that when collecting it, the edges of the string must be freed from the slots in the bobbin. You can check the correct assembly of the semi-automatic head of our garden equipment by simulating the tapping of the trimmer on the ground. Press the button in the center and at the same time pull the edges of the line. If everything is in order, the antennae are slightly extended.

How to Tuck Line Into the Oleo-Mac Trimmer

Changing the line on a trimmer or lawn mower

Changing the line on the trimmer

To replace the line on a trimmer or lawn mower (cord, strings), you first need to know its thickness. If the remnants of the cord are not preserved, then we study the passport of our garden equipment. Sometimes the information you need can be found by carefully examining the mowing reel, a range of diameters can be applied to its surface. If our search was unsuccessful, then we simply estimate the diameter of the outlet on the coil. The line should move effortlessly in it. I do not recommend widening the holes in order to use a thicker string to increase productivity and the possibilities of gardening equipment. Line thickness is calculated by the manufacturer based on engine power.

To replace the cord on most models, it is necessary to disassemble the mowing reel by pressing the latches. Sometimes, simultaneously with pressing the latches, you also need to turn the upper part of the coil.

A standard bobbin is loaded with 5-6 meters of thin cutting line or up to 3 meters thick. Figures are approximate, depending on the size of your mowing head. If it overheats during the mowing process, it is best to use less line. There is a chance that it will be baked and you will simply throw it away.

In the simplest trimmers and lawn mowers, there is a non-automatic reel with one tendril. Everything is simple there, we fix one edge of the line in the slot inside the bobbin. Then we wind as much cord along the arrow as will fit under the protective casing. We bring out 10 cm of strings through the holes in the protective casing and the coil and assemble it.

How to tuck the line in the oleo mak trimmer.

On Oleo-Mac lawn mowers, the cutterbar does not need to be disassembled at all. We just pass the string through the holes. We center it, and by rotating the lamb in the direction of the arrow, we wind the cord. Changing the line on the trimmer is very fast, this design is starting to occur more and more often.

How to tuck the line into the trimmer?

Any machine for mowing vegetation is necessarily equipped with a spool, which, in turn, may differ in different models with a filament feed system (automatic, semi-automatic and manual). It is from this parameter that it is worth starting from before deciding how to fill the line into the trimmer.

In order to tuck the line into the trimmer, you need to take at least 5 meters of material, which is then folded in half. The center of the cutting element must be inserted into a specially designated place, and then the cutting attachment must be wound using the visual cues on the spool indicating the direction. At the end of all the work, the lid, of course, will need to be tightened.

Types of trimmer line

As a rule, line separation is based on different sample diameters, which can vary from 1.2 to 4 mm. The most commonly used material is a material with a thickness of 2 mm, but in no case should we forget that the choice should depend primarily on the trimmer model.

There is one main rule here: the more power the apparatus has, the thicker the line should be.

This element can also differ in the type of its section. So, it can be round (suitable for cutting plain grass) or square (for mowing soft green cover), sharp edges (tall grass) or be equipped with notches ideal for thin grass in diameter.

Do not forget that with the help of a fishing line it is allowed to mow only grass, and for other, coarser vegetation, it is imperative to use knives.

Next, you should take a closer look at the process of how to insert the line into the trimmer correctly. Indeed, it is with this procedure that many consumers often have difficulties.

How do I fit the line into the trimmer? Operating tips

The trimmer is an excellent modern device designed for mowing unnecessary grass, and its main advantage is that this technique can be used in those places where an ordinary lawn mower will simply not be able to reach due to its massiveness. It is necessary to understand in more detail what trimmers are, and how to choose the best option for a particular summer cottage.

What is a trimmer?

This equipment is based on the following elements:

  • a motor whose main function is to rotate the cutting head at the end of the rod;
  • directly the head, consisting of a reel on which either a fishing line or a knife can be wound;
  • knives or fishing line rotating at high speed, which are the main cutting part of the device, how to load the fishing line into the trimmer will go a little further.

An electric device is inferior in its power to a gasoline one, so it is ideal for working on a standard plot of land that is adjacent to a house with source of electrical energy. The main positive aspects of such equipment are the absence of noise during operation, light weight, ease of use and, of course, environmental friendliness.

As for gasoline trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any area. There is no need to use electricity here, which has a positive effect on the functionality of such an apparatus. the cutting attachments can be changed, working with weeds of various types.

One of the most common attachments is the fishing line, so you should dwell on this element in more detail.

Line adjustment

One of the main rules when replacing and adjusting equipment is that any manipulations with the mechanism should be carried out exclusively with the engine off and the device plug disconnected from the mains.

Perhaps these tips will tell you how to tuck the line into the trimmer as correctly as possible and, accordingly, give your site a neat and aesthetic appearance. All that is required is to correctly select the cutting material required by the type and, of course, to determine the category of the most used trimmer.

How to tuck the line into the trimmer?

In order for the area near the house to always look well-groomed and neat, it must be cut regularly. Fortunately, modern technology allows you to solve this problem without excessive physical effort. Electric trimmers are so easy to operate and maintain that even a teenager can use them to mow. The main thing is to figure out in advance how to fill the line in the trimmer.

How to load the line into the trimmer?

So, our task is to properly load the line into the trimmer. Let’s take a closer look at where to start its implementation and what pitfalls can await us in the process.

#SpartaОлеоМак Ремонт бензокосы Sparta 38 Oleo-Mac

Step 1. choosing the line

Step 2. remove the coil from the trimmer

To perform this operation, the trimmer must be disconnected from the mains and turned over with the working head up. The further course of action depends on the trimmer model and the design of the coil itself:

  • for small trimmers with a lower engine position, press on the keys located on the sides of the coil and remove its upper part from the head;
  • on trimmers with a curved bar, we clamp the coil body with one hand, while simultaneously turning the winglet located on the body counterclockwise;
  • for trimmers with a straight bar and a gearbox, insert a screwdriver into the hole located under the coil, and then turn the coil body counterclockwise.

Step 3. disassemble the coil

After the coil is removed from the head, it must be carefully disassembled. It is better to do this on an already mown area, since there may be a spring inside the coil, which will be quite difficult to find in tall grass. After disassembly, we will have three parts on our hands: the body (top cover), the protective casing and the coil itself.

Step 4. measure the required amount of fishing line

Newbie mowers are usually interested in how many meters of line to wind on the trimmer reel? There are two ways to solve this issue:

  • Unwind a skein of line on a flat, dry place and separate half of it.
  • Measure 3-4 meters of line from the skein.

In any case, after the end of winding, the turns of the line should be on the body of the reel, without sliding off it. You don’t need to try to wind as much as possible, as the line will unwind poorly and break more often.

Step 5. winding the line onto the reel

How to attach the line to the trimmer depends on the coil design. Consider the option when there is one outlet for the line in the coil body. In this case, the end of the line is clamped in the crevice of the coil, and then we wind the line, trying to lay the turns as tightly as possible. The direction of laying the turns should be opposite to the direction of rotation of the coil and is usually indicated on its inner part. After the end of winding on the spool, you must put on a protective casing and bring the end of the line into it

If the reel is designed to work with two tails, then the line must be folded in half and laid in the groove in the center of the reel. Further winding will be carried out along one or two slots, depending on the design of the coil. The direction of winding must also be opposite to the direction of rotation of the coil. At the end of the ponytail, the line will also need to be led out into the holes on the top of the reel.

How to change the line in the trimmer and which one is better to choose

Since we considered the choice of a trimmer in the previous article, today we will tell you how to properly fill the trimmer with fishing line, and which one is better to choose based on the working conditions.

After you bought a trimmer and began to actively use it, sooner or later the question of replacing the fishing line will arise, since this is the most wearing element in the tool, then intensive use of the trimmer will lead to frequent replacement of consumables.

What types of woods are there

The most common type of line that fits almost all reel types is round cord. This is an ordinary fishing line, suitable for mowing succulent grass, but it will be much more difficult to mow dead wood with it, and even more so it will not cope with shrubs.

As a rule, the diameter that can be used to cut young grass does not exceed 1.6 mm. The thicker the thread, the more coarse grass it can overcome.

There are fishing lines with sharp edges in the form of an asterisk or a square, this option is more adapted to mowing dry grass precisely due to the existing sharp edges, but its disadvantage is greater wear and tear and it is inferior in strength to a round cord.

There are fishing lines with improved aerodynamics with characteristic dents, scales and notches, such a product makes less noise, but it is used only on lawn mowers, since the exit of such a thread from the reel is difficult, it is used most often with discs into which segments are inserted. The disadvantage of such a product is its fragility.

Most often in gasoline trimmers with an engine with an output of more than 1.5 hp. use cords with a metal cable inside.

This thread is ideal for cutting dry grass and small bushes. The presence of a core has a positive effect on the wear resistance of this material.

The disadvantage of such a cord is its price, which is significantly higher than the listed opponents.

How to remove or tuck the line into the trimmer

It will take about 10-15 minutes to wind the line. What is a trimmer coil? Plastic body with a cassette inside, on which there is a special hook for easy winding of the fishing line.

Almost all trimmer reels have a similar fastening principle, this is a central screw-button, when pressed, it becomes possible to pull out the line of the required length. The photo below shows a few examples of different trimmer spools.

The bobbins of the trimmers, the motor of which is located at the very ground, have a different attachment to the axis of rotation, they have two buttons on the spool located on the sides that need to be wrung out, otherwise the replacement of the thread is no different from other cassettes.

The principle of correct winding of the fishing line is similar in all of the above cases, therefore, for example, consider the standard version with two antennae.

To remove the spool with the fishing line, you need to unscrew the centrally located screw, but note that the thread is left there, so you will have to turn it clockwise, this was done on purpose so that during operation it does not open under the influence of centrifugal force.

Next, using a screwdriver, disassemble the head and remove the spool onto which the fishing line is directly wound.

Having measured the required length and folded in half, you need to tuck the fishing line into the spool, eventually bringing its ends opposite each other (for this there are special slots for fixing).

After that, it is necessary to assemble the head in the reverse order, threading the ends of the cord into two corresponding holes.

If you have doubts or it is not entirely clear how to load the line on the trimmer, we recommend that you look at how to properly wind the line into the lawn mower.

In this video, in detail, step by step, the instructor will open the trimmer head, measure the required amount of line, usually from two to four meters, and demonstrate assembly and installation on the trimmer.

Italian, quick-loading (automatic) mowing head / spool EMAK (EFCOOLEO-MAC) with a METAL spout that protects the mowing head from rubbing and can be called the most eternal! Applies to: petrol brush cutter / lawn mower / lawn mower Oleo-Mac, Gardena, MTD, Al-ko, Sadko, Orleon, Goodluck, Ferm, Foresta, Dnipro-M, Minsk-MTZ, Tatra Garden, Zenit and so on. It is possible to install on an electric trimmer (on which the knife is placed)

Thread seat: 10×1.25mm (standard).

Has an adapter, the ability to install a mowing head for a diameter of 12mmx1.25mm.

The mowing head has a very big advantage over others:

Thick, aluminum exit eyes with a seat under the line, so that in the process of work, the line does not break when the line comes out of the drum. Does not require replacement and search for the exit eyes of the line, which is often found in cheap mowing heads.

Rigid spring that does not spontaneously throw out the line / vein in a couple of seconds from the drum.

Double wall drum, more wear-resistant than single wall.

The buttons for opening the mowing head are located near the gearbox. (In other mowing heads, they are located at the bottom, you mean, after a while of operation, the drum will open spontaneously, since the seat for the latches will be erased or worn out).

Replaceable nose (green) of the mowing head. (I will not need to throw out the mowing head, it will be enough to change the nose of the mowing head, which takes over the entire sliding stop)

Quick-loading mowing head that does not need to be disassembled to thread the line into the drum. It is enough to perform the functions described in the instructions (in the picture)

The underskirt has a larger outer diameter to provide shock resistance and increased durability.

Solid milled, replaceable mowing head spout plate that protects the mowing head from wiping, holes and clogging of the spool with grass.

The Italians made a replaceable metal adapter (you can change it even with your fingers without unnecessary tools) so that this mowing head fits all types of lawn mowers, in particular those that have a seat not a nut, but a bolt (On the Oleo-Mac Sparta 25 model, 26, 250T, 37.42, TR111E, TR 130E / Efco Stark 25, 37, 42, 750, 746, 755.

The mowing head comes with a pre-loaded 3 meter round line.

Battery trimmer Oleo-Mac BCi 30 set

The battery trimmer Oleo-Mac BCi 30 is able to cut grass and small weeds. The cutting head diameter is 103 mm and the maximum recommended line is 2 mm. For the convenience of the user, a Loadgo mowing head is installed, which makes it possible to easily refuel the cutting line without dismantling. The absence of wires does not restrict freedom of movement, and the absence of noise allows you to work at any time of the day without fear of disturbing your neighbors.

Oleo-Mac BCi 30 complete set:

LoadGo trimmer head with 2mm line.

Charger and battery 40W series.

The manufacturer has the right to change the configuration and specifications without notice. To avoid misunderstandings, check with the manager for details.

Features of the Oleo-Mac BCi 30:

Innovative technology: the latest generation of gardening tools is intuitive for any user. It features high quality and safety, performance and long battery life.

The lowest noise level in its class. You can work any time of the day without the fear of disturbing your neighbors.

Environmentally friendly. no harmful emissions and no fuel mix problems, leaks or bad odor.

High performance thanks to modern electric motor and powerful 2.5 or 5.0 Ah batteries.

Absolute ease of use: just check the battery level and you’re ready to go.

Maximum freedom of movement: no wires to get in the way.

Autonomy. no need to connect to the mains.

Versatility and economy: the entire range of this series runs on the same batteries, so you can reduce your costs by purchasing one battery with charger and several types of gardening tools.

The battery trimmer Oleo-Mac BCi 30 is powered by a Bi-series rechargeable battery. It belongs to the light class of braids, created for users who use for personal purposes. The trimmer is optimally balanced so that the user does not get tired for a long time

Trimmer line round Unisaw Professional Quality 2,4 mm 15 m

Trimmer disc Oleo-Mac

Benefits

  • The handle is isolated from the engine by a rubber shock absorber that dampens vibration during operation.
  • The rod is made of aluminum, which makes the model lightweight. Also aluminum is rust resistant.
  • The forged steel shaft handles not only fresh greens, but also dry grass when installing a special knife.
  • Fuel priming system provides uninterrupted cold engine start after refueling or long idle periods.
  • Air filter is easily accessible for easy maintenance and no special tools.
  • The ergonomic handle is equipped with controls that make it possible to adjust the number of revolutions, as well as quickly turn off the engine in an emergency.

Grease for gearboxes and bearings molybdenum Oleo-Mac 125 g

Detailed description

The Oleo-Mac SPARTA 25 gasoline scythe is designed for the care of adjoining territories, summer cottages and cottages. The scythe copes with fresh grass, as well as hard and dry weeds.

Trimmer reel Oleo-Mac TapGo 2.4 mm

Trimmer petrol Oleo-Mac SPARTA 25 ECO ALUMINUM 1 hp.