How To Use A Lawn Mower

How to work with a lawn mower How to work with a lawn mower Any advertisement presents a modern lawn mower as a versatile tool that can do the work of a dozen mowers in an hour. Besides the big

How to operate a lawn mower

Any advertisement presents a modern lawn mower as a versatile tool capable of doing the work of a dozen mowers in an hour. In addition to high productivity, the lawn mower allows you to get a good quality lawn and successfully mow, regardless of skill, with relatively little physical activity. But working with a lawn mower is not so easy, it requires a certain skill in operating the machine and a good knowledge of the terrain features.

how to use a lawn mower

Lawn Mower Control Basics

In fact, any of the lawn mowers is a motor with a pair of sharp knives mounted on the motor shaft. The entire structure of the motor shaft with the impeller is covered with a plastic or steel guard and fixed to the wheel cart. Despite the relatively large weight of the unit, in theory, any adult without special physical training can mow with a lawn mower. However, mowing grass is not as easy as the advertisements might look like.

To operate the lawn mower correctly and safely, you must:

  • Correctly service the device, adjust and prepare the mower for work;
  • It is good to navigate the terrain of the mowed area. Before starting work, inspect the area and remove stones, large branches, any debris that can break off the cutting edge, knife and engine;
  • If there are flower beds or shrubs on the lawn, plan the mower’s route and where to unload the cut grass container in advance.

Handle adjustment

Modern lawn mowers make it possible to adjust the position of the handle for any height or features of the constitution and physique of a person. The easiest way to mow and steer the cart is if your hands on the handle are at the level of the center of gravity of the body or 2-3 cm higher.

With a large mass of the lawn mower, the control handle has a lot of force, so when choosing a model, choose a design with an aluminum or steel tubular frame.

This is especially true for front-wheel drive lawn mowers. Owners of front-end mowers like to hang the front axle, thereby reducing traction and adjusting the direction of travel of the machine by turning the body on the rear axle in the desired direction.

Can wet grass be cut with a trimmer and lawn mower and how do I do it?

Arrangement of a suburban area (and even a local area in a city) is a very difficult matter. Especially because you have to look after the farm all the time. Many people also have questions about how to do this or that work, for example, is it possible to mow wet grass with a trimmer.

Features of the situation

Of course, such a question will not arise for those who live in the immediate vicinity of the lawn. Then you can wait a while and work when the grass dries up. But the need to remove wet grass arises immediately, if you can visit the site only occasionally. What to do if you have to mow the lawn on weekends, on another day with rainy weather, that’s the subtlety. The opinions of the summer residents themselves differ, therefore it makes little sense to be guided by their position. You need to figure out the nuances yourself.

The role of equipment

It should be pointed out at the outset that there are two main types of trimmers that “relate” differently to wet vegetation. Some devices are equipped with a gasoline engine, others are set in motion by connecting to the mains or installing a battery. In turn, the trimmer is divided into two subgroups: with the location of the motor in the lower or upper part of the apparatus. Safe enough for the user to remove wet grass can only be gasoline trimmers or hand scythes.

READ  Replacing the Dde Lawnmower Oil

In this case, it is strongly undesirable to use an electric lawn mower. Sometimes you can find statements that this requirement applies only to devices with a lower motor placement. Such an electric motor comes into direct contact with water. Because of this contact, you can be afraid of a short circuit.

If water does get inside the power plant, there is a risk not only of a short circuit, but also of an electric shock. It is worth noting that these restrictions apply not only to trimmers, but also to full-fledged lawn mowers. The assurances of manufacturers and marketers about safety should not be taken into account. To minimize the risk to yourself and your equipment, you should use a lawn mower. But there are a few more subtleties that must be taken into account.

Even if the mower does not fail and its owner is not electrocuted (let’s say such a favorable situation for a minute), you still cannot mow wet grass with a trimmer. This is a deliberately abnormal mode of operation, due to which the equipment wears out too quickly. Wet vegetation is much more resistant to cutting elements than it should be. Therefore, even very well insulated motors are overloaded.

Due to the sticking of wet grass to the knives and to the spindle, the load on them will necessarily increase. This cannot be avoided, and no skill of mowers, no methods and schemes of lawn clearing help. Not only the motor suffers, but also the shaft, which sometimes turns.

Problems when mowing wet grass can also arise with gasoline machines. Yes, they are more powerful than their electrical counterparts, but the load still exceeds normal values. First of all, piston pairs and other moving parts are “under attack”. If there is no way out other than using a gasoline mower, you need to take care of it. When mowing raw grass, the machine is periodically switched to idle mode without load. 30 seconds is enough to remove excess heat, as well as save the trimmer resource.

And more about different situations

When talking about mowing wet grass, you need to distinguish between the following possible situations:

  • It is wet after rain;
  • It is raining;
  • The reason for the moisture is a damp area (lowland or groundwater).

In the first case, it is quite possible to take a chance and try to put things in order with a lawn mower. In the second, mowing is impractical. In the third, you will first have to solve something with moisture and only then put the lawn or lawn in order. If you often have to mow wet grass after rain or “through dew” in a small area, then it is better to use not a trimmer, and not a lawn mower, but a simple hand scythe. You need to look not only at the grass that is being removed, but also at the one where the power cable is placed.

Moisturizing it can be a very serious risk factor. To mow the grass after rain, you need to wait a little. A few minutes, even with a very big rush, will not noticeably reduce the time that can be set aside for mowing.

As for mowing raw grass, there are still the following objections to it:

  • It is more difficult to walk with a trimmer or lawn mower in such conditions, you can easily fall and get injured;
  • You will have to spend more time on work;
  • After mowing, it will be necessary to thoroughly clean the machine itself;
  • Wet chlorophyll will leave more stains on clothes, leather, shoes.

Now you need to figure out exactly how to act if you still decide to use a gasoline trimmer to clean your lawn or lawn in wet weather. An important rule is to keep the grass at the optimum length. By overly shortening it, especially in the summer, summer residents run the risk of provoking early drying of plants. It is unlikely that this will contribute to a good appearance.

READ  How To Mix Fuel For A Lawn Mower

Sure, wear durable, waterproof footwear. Use headphones or earplugs only when working with a two-stroke petrol trimmer. On a large clearing with flat grass, mowing is carried out along imaginary squares, conventionally dividing the entire territory into them. They first move along the perimeter of each square, then mow it from the inside and move on to the next part of the lawn. Regardless of the weather, before starting work, you should do the following:

  • Check the serviceability of the equipment;
  • Remove all debris and foreign objects from the site;
  • Replace, if necessary, worn cutting elements;
  • Are determined with the direction of the mowing so that the lawn does not resemble a “washboard”.

For how to cut wet grass with a trimmer and lawn mower, see the following

How to use the trimmer correctly

Garden trimmers are efficient. Newbies think it’s easy to operate a lawnmower by plugging it in or pouring fuel, but that’s not entirely true.

The efficiency of the garden tool and its service life directly depend on the operating conditions. Therefore, before using the trimmer, you need to do some preparatory work.

The lawn from which you need to mow the grass is carefully examined. Glass and large stones must be removed. When flying out from under a running mower, they can injure a person. Wire is removed from the lawn, because it can wrap around the rotating element and break the mower.

After that, proceed to the installation of the cutting system. There are low power trimmers on the market that only use line. It is designed for cutting juicy and soft grass. But there are models with a capacity of more than 1 kilowatt, on which metal knives are installed. They cut off sow thistle and other hard weeds, trim young shrubs.

In order to replace the cord with knives, you need to unscrew the fastening nut, install the cutting element. Then the nut must be returned to its place, tightened with a wrench.

The operator must take care of his own safety. Mow the grass in heavy protective clothing. Special goggles are used to protect the eyes; they will protect against dust, grass and flying debris. Hands are covered with gloves.

The electric trimmer is plugged into the network, and battery models are charged for several hours before use. Fuel is poured into a gasoline mower.

Hold the mower with the spool or knife parallel to the ground. When the tool is in the correct position, turn on the motor. Turn off the mower after the grass has been cut.

We mow under hay

It is better to mow hay not with a fishing line, but with a metal disc. The grass is cut at the root, keeping its length as much as possible.

How to refuel the gas trimmer

Gasoline-powered lawn mowers are available with two-stroke and four-stroke engines. The first option is much more common. What are the differences between them:

  • Trimmers with a 2-stroke motor have a faster response to pressing the engaging lever (for this reason, lawn mowers are mainly equipped with this type of engine);
  • A tool with a two-stroke engine will be much lighter and also easier to maintain;
  • Fuel consumption of a two-stroke engine is higher than that of a 4-stroke engine with the same power by about 30%;
  • A 4-stroke engine is more environmentally friendly, since the fuel in it burns completely and is not emitted into the atmosphere, and its noise level is much lower;
  • And the most important distinguishing feature is the refueling: the 2-stroke engine is equipped with one common tank, into which gasoline mixed with oil is poured; The 4-stroke has a separate gas tank and engine oil tank.

For refueling, you must use fresh AI-92 or AI-95 gasoline and high-quality motor oil for garden equipment (manufacturers produce different oils for 2- and 4-stroke engines). Mineral, semi-synthetic or synthetic oil can be used.

READ  Do-it-yourself Lawnmow Repair. Lawn mowing construction

The proportion of gasoline and oil for trimmers with 2-stroke engine can be found in the instruction manual for the particular model. Usually it is 50: 1, in some cases a ratio of 25: 1 or 40: 1 is recommended. It is necessary to prepare the fuel mixture in a separate container with exact proportions. Never pour liquids “by eye” directly into the tank without first mixing them. Detailed instructions for mixing gasoline oil, with and a description, can be found on our website here.

 

Gasoline-powered lawn mowers are available with two-stroke and four-stroke engines. The first option is much more common. What are the differences between them:

  • Trimmers with a 2-stroke motor have a faster response to pressing the engaging lever (for this reason, lawn mowers are mainly equipped with this type of engine);
  • A tool with a two-stroke engine will be much lighter and also easier to maintain;
  • Fuel consumption of a two-stroke engine is higher than that of a 4-stroke engine with the same power by about 30%;
  • A 4-stroke engine is more environmentally friendly, since the fuel in it burns completely and is not emitted into the atmosphere, and its noise level is much lower;
  • And the most important distinguishing feature is the refueling: the 2-stroke engine is equipped with one common tank, into which gasoline mixed with oil is poured; The 4-stroke has a separate gas tank and engine oil tank.

For refueling, you must use fresh AI-92 or AI-95 gasoline and high-quality motor oil for garden equipment (manufacturers produce different oils for 2- and 4-stroke engines). Mineral, semi-synthetic or synthetic oil can be used.

The proportion of gasoline and oil for trimmers with 2-stroke engine can be found in the instruction manual for the particular model. Usually it is 50: 1, in some cases a ratio of 25: 1 or 40: 1 is recommended. It is necessary to prepare the fuel mixture in a separate container with exact proportions. Never pour liquids “by eye” directly into the tank without first mixing them. Detailed instructions for mixing gasoline oil, with and a description, can be found on our website here.

How to use the trimmer correctly

Garden trimmers are efficient. Newbies think it’s easy to operate a lawnmower by plugging it in or pouring fuel, but that’s not entirely true.

The efficiency of the garden tool and its service life directly depend on the operating conditions. Therefore, before using the trimmer, you need to do some preparatory work.

The lawn from which you need to mow the grass is carefully examined. Glass and large stones must be removed. When flying out from under a running mower, they can injure a person. Wire is removed from the lawn, because it can wrap around the rotating element and break the mower.

After that, proceed to the installation of the cutting system. There are low power trimmers on the market that only use line. It is designed for cutting juicy and soft grass. But there are models with a capacity of more than 1 kilowatt, on which metal knives are installed. They cut off sow thistle and other hard weeds, trim young shrubs.

In order to replace the cord with knives, you need to unscrew the fastening nut, install the cutting element. Then the nut must be returned to its place, tightened with a wrench.

The operator must take care of his own safety. Mow the grass in heavy protective clothing. Special goggles are used to protect the eyes; they will protect against dust, grass and flying debris. Hands are covered with gloves.

The electric trimmer is plugged into the network, and battery models are charged for several hours before use. Fuel is poured into a gasoline mower.

Hold the mower with the spool or knife parallel to the ground. When the tool is in the correct position, turn on the motor. Turn off the mower after the grass has been cut.