Husqvarna Dms Diamond Drilling Rig

28th February 2020

Found cheaper? Get a discount!

We have received your message and will call you back

We have received your message and will contact you shortly.

Dms 240 electric drilling rig for various types of work. The most powerful machine in our line of drilling rigs with stands. An ideal system for drilling holes up to 190 (250) mm in walls, floors and roofs. The stand easily tilts, the rear support is equipped with a rigid fixation system for stable drilling at an angle. Suitable for drilling canals for ventilation and plumbing, garbage chutes, installation of barriers and road signs. New carriage Drilling stands are equipped with one- and two-speed carriages of a new design, have a quick-disconnect connection for the installation of drilling machines. Lightweight design Lightweight aluminum base plate. Overload Protection Increases productivity and extends machine life. Transport wheels The rack is equipped with transport wheels.

Diamond drilling rig with HUSQVARNA DMS 240 stand art.9651736-03 It is a fully functional drilling system for a wide variety of applications. This is the most powerful rack system in the Husqvarna range of drill rigs. The stand can be tilted and equipped with a convenient carrying handle.

The two-speed carriage gearbox allows you to select the optimum feed rate depending on the operation

Lightweight aluminum base plate.

Electronic overload protection avoids overheating and prolongs product life.

Husqvarna DMS 240 Drilling Machine. Comes with wheels for easy transport.

Husqvarna DMS 240 Drilling Machine Features

If used improperly or carelessly, the machine can be dangerous and cause serious personal injury! For safety and convenience with the drill always use:

Proven safety helmet
Proven Headphones
Proven safety glasses or mask
Respirator

DMS 240 is an electrical installation designed for drilling various concrete and stone materials. The drilling machine has a simple modular design and is easy to assemble. The engine must run mounted on a stand. The drill has two gears. The engine has double insulation. When overloading and pinching the crown, the protective system cuts off the power supply! The Husqvarna DMS 240 drilling machine is water cooled. To cool the engine, let the machine idle for 1-2 minutes. It also blows dust and dirt from the engine, thereby extending the life of the machine.

1. The switch2. Carbon brush cover3. Plate mounting on the stand4. Drilling spindle5. Gear selector6. Water supply fitting7. Residual current circuit breaker PRCD

Stand for drilling walls, floors and ceilings. The stand of the DMS 240 drilling machine is equipped with a stove for quick fastening of the engine. The base plate is made of aluminum and therefore has a light weight. The plate has a gasket vacuum fastening. The set of wheels is removable. The column can be tilted 0-60 °. The carriage has two gears: direct. 1: 1 and high. 2.5: 1. The feed lever can be used to adjust the support leveling screws and the desired column tilt.

Ceiling stop screw

Depth and Tilt Scale

Vertical and horizontal level gauges

Column tilt lock screw

Carry handle

Quick Install Plate

Wheel kit (removable)

Base plate with integrated vacuum function

Vacuum fitting

Vacuum cap gasket

Base plate vacuum

Hex 3 mm and 4 mm

Specifications

Documentation

Feedback (0)

Accessories

Tank with electric pump Husqvarna WT 15

The powerful lithium-ion battery and charger WT 15 and the new wet cutting kit with a sequential adjustment water valve ensure efficient operation with less water consumption and sludge volume. Well-protected pump The pump is located inside the water tank, where it is well protected against damage during transport or careless handling. Convenient transportation When transporting the WT 10, the water hose is conveniently wound around the replaceable lower part, while the end connector is located in a special compartment. Two-speed pump The electronic circuit of the pump contains a built-in function to increase productivity. When the switch is pressed for 1.5-2 seconds, the pump starts to work at double speed and deliver twice as much water. This feature is especially useful when used in conjunction with Gardena sprayer to clean the machine after work. Of course, this function can be used if cutting for some reason requires.

Husqvarna sump 110mm

The use of sludge collectors in the operation of diamond drilling rigs allows the collection of dirt generated in the process of creating holes. They can be used when working in both horizontal and vertical position. This collector is suitable for diamond crowns with a maximum diameter of 110 mm. Designed specifically for Husqvarna rigs. The collector consists of a metal casing and a branch pipe to which you can connect an industrial vacuum cleaner.

Husqvarna catchment 132mm

The use of sludge collectors in the operation of diamond drilling rigs allows the collection of dirt generated in the process of creating holes. They can be used when working in both horizontal and vertical position. This collector is suitable for diamond crowns with a maximum diameter of 132 mm. Designed specifically for Husqvarna rigs. The collector consists of a metal casing and a branch pipe to which you can connect an industrial vacuum cleaner.

Husqvarna water collector 160mm

The use of sludge collectors in the operation of diamond drilling rigs allows the collection of dirt generated in the process of creating holes. They can be used when working in both horizontal and vertical position. This collector is suitable for diamond crowns with a maximum diameter of 160 mm. Designed specifically for Husqvarna rigs. The collector consists of a metal casing and a branch pipe to which you can connect an industrial vacuum cleaner.

Husqvarna water collector 210mm

The use of sludge collectors in the operation of diamond drilling rigs allows the collection of dirt generated in the process of creating holes. They can be used when working in both horizontal and vertical position. This collector is suitable for diamond crowns with a maximum diameter of 210 mm. Designed specifically for Husqvarna rigs. The collector consists of a metal casing and a branch pipe to which you can connect an industrial vacuum cleaner.

Husqvarna water collector 220mm

The use of sludge collectors in the operation of diamond drilling rigs allows the collection of dirt generated in the process of creating holes. They can be used when working in both horizontal and vertical position. This collector is suitable for diamond crowns with a maximum diameter of 220 mm. Designed specifically for Husqvarna rigs. The collector consists of a metal casing and a branch pipe to which you can connect an industrial vacuum cleaner.

Husqvarna water collector 65mm

The use of sludge collectors in the operation of diamond drilling rigs allows the collection of dirt generated in the process of creating holes. They can be used when working in both horizontal and vertical position. This collector is suitable for diamond crowns with a maximum diameter of 65 mm. Designed specifically for Husqvarna rigs. The collector consists of a metal casing and a branch pipe to which you can connect an industrial vacuum cleaner.

Husqvarna V-shaped water collector 350mm

Husqvarna catchment collector, whose V-shaped design allows you to work with large diamond crowns with a maximum diameter of 350 mm. Carries out the collection of contaminants (sludge) that occurs during the operation of drilling rigs in the wet way. Keeps the workplace clean. It can be used only when drilling in horizontal position. The collector consists of a metal casing and a branch pipe to which you can connect an industrial vacuum cleaner.

Husqvarna V-shaped water collector 700mm

Water tank with Husqvarna hose 15 l

A pressurized water tank can be used when there is no nearby source of pressurized water. A few strokes of the pump are enough to create the required water pressure. The tank has a capacity of 15 liters and is equipped with a 3 m long water hose. The hose is connected to the wet cutting kit on the machine.

Husqvarna D825 M16 Diamond Core Set

Installation kit for air conditioners Husqvarna D 825 M16. It is used for drilling holes in masonry, building elements, concrete. Includes 5 crowns of the most running diameters, a connector, a centering device, adapters and extension cords. All elements of the set are made of modern, durable materials with increased wear resistance, which ensures high quality work. In a set of 5 crowns of the most running diameters, centering device, connector, adapters and extension cords. Weight is 6 kg.

Husqvarna Noise Canceling Headphones

The design provides pressure control within 20%. Lightweight elastic headband with soft pad. The ear muffs are identical to those on the Husqvarna helmet. Approved in accordance with CSA, ANSI, EN

Adapter for the Husqvarna 1/2 GM vacuum cleaner. 1 1/4 M

Adapter for the Husqvarna 1/2 GM vacuum cleaner. 1 1/4 M allows dust to be sucked through the inside of the instrument. This ensures perfectly clean operation. Over, the drilling speed increases, which saves time. In the process of working with diamond drilling rigs, a lot of dust and debris is formed. In order to avoid pollution of the room, a vacuum cleaner is attached to the working equipment with the help of adapters. Husqvarna’s ergonomic adapter allows you to quickly collect dust through suction through the inside of the instrument.

Industrial vacuum cleaner HUSQVARNA S26

The HUSQVARNA S26 universal vacuum cleaner is a single-circuit dust removal system for wet and dry jobs. Thanks to its compact design and low weight (47 kg), it is easy to carry and ideal for small jobs. The compact, lightweight Husqvarna S26 vacuum cleaner is equipped with one powerful single-phase electric motor with separate cooling and can therefore be continuously operated throughout the day. Suitable for any construction, dismantling and restoration work, as well as for use with electric tools. The model has been thoroughly tested and tested in real working conditions, providing technological efficiency at the place of work in most applications and situations. The vacuum cleaner is designed to be connected to a 220-240V network, including in residential premises, it also has a low noise level. Three separate filtration stages lead to an increase in the working time between filter cleaning. The dust is filtered through a cyclone chamber, which separates the heaviest parts up to 95% of the dust in front of the washable main filter. Hepa microfilms are fully tested and certified to capture 99.99% of the remaining corrosion-resistant steel clamps, a welded frame with a dust collector platform and a robust steel handle make the Husqvarna S26 vacuum cleaner ready to serve for many years. Welded frame for easy transport. The HEPA13 high-performance particulate microfilter captures 99.95% of the remaining dust with sizes ranging from 0.15 to 0.30 microns. This ensures an efficient and safe dust collection even when sanding and working with gypsum dust. The Jet Pulse main filter filter cleaning system provides high airflow continuity through simple and efficient cleaning and ensures stable dust collection throughout the working day. The Husqvarna S 26 vacuum cleaner has an H level classification. The international standard for testing dry and wet dust collectors (IEC-60335-2-69, EN-60335-2-69) divides dust collectors into three categories: L. Low level, M. Medium level and H. High level, where level H meets the most stringent standards. The vacuum cleaner is equipped with a Longopac dust collection and storage system, which is a 22 m long tape, which is divided into bags using the clamps supplied with the unit. Husqvarna S26 is suitable for rooms where high suction and flow are required to eliminate airborne dust.

Husqvarna mask professional headphones

Husqvarna 5056653-48 Professional Headphones are designed to protect you from working noise. A transparent plexiglass shield will be a reliable barrier for flying stones, grass, dust when working with chippers, perforators, drills, lawn mowers and other tools. Additionally, you can mount a sun visor. Approved in accordance with ANSI, CSA, EN

Extension for diamond crowns Husqvarna 1.1 / 4 F. 1.1 / 4 M 1000 mm

Extension pieces for Husqvarna diamond crowns. To increase the maximum drilling depth of the diamond core. They are made of both steel and aluminum as a lighter option. Application procedure: at the first stage, drilling is performed with a standard-size diamond core, then the core is removed from the hole, an extension cord is screwed to the crown and drilling continues to a greater depth. The use of several interconnected extension cords is allowed. The use of extension cords when working with large-diameter crowns is not recommended, due to the difficulty of extracting large core samples. In this case, the use of elongated diamond crowns is recommended.

Source

Drill diamond, drilling, husqvarna