In What Ratio To Dilute Gasoline For Trimmer

Depending on the variety of trimmers, they can be filled with a fuel mixture or separately with gasoline and oil. Now there is a huge variety of types of motor oils that are suitable for various equipment, including garden. To choose the right fuel for a particular model of lawn mowers, you need to know its technical features and understand the brands of gasoline, as well as liquid lubricants. All details on how to dilute gasoline with trimmer oil are in the material below.

Features lawn mowing

Depending on the engine design, lawn mowers are divided into two-stroke and four-stroke. In the first case, the piston in the internal combustion engine makes 2 strokes in one working cycle, and in the second case. 4 strokes. Differences in the operating principle of the engine determine the different approaches to refueling the trimmer.

Two-stroke lawn mowing

In ordinary household models, the lawn mow is used, as a rule, a two-stroke engine. Lawn mowers do not need very high power and agility, so it is quite suitable for the fulfillment of tasks. In addition, this engine is much cheaper and simpler, but it is fueled with a fuel mixture that consists of oil and gasoline. Such fuel is poured into the carburetor and fed into the cylinder in the form of oil-gasoline fog. Thus, the oil provides lubrication of all necessary parts, and during the operation of the engine burns out along with gasoline. However, the combustion of this mixture is accompanied by the release of a pungent odor and smoke, which increases the toxicity of exhaust gases.

In What Ratio To Dilute Gasoline For Trimmer

Four-stroke lawn mowing

Four-stroke engines are used in professional lawn mowers. They have great power and can work for a long time without a break and refueling. They are also used as fuel. Gasoline and oil, but they are poured into different tanks. This means that the oil does not participate in the combustion process, so the exhaust gases are not so toxic.

Rules for choosing gasoline

Before buying fuel for your lawn mowing, you need to read the manufacturer’s instructions. It indicates the grades and brands of fuel that can be used for a specific trimmer model. In general, when choosing gasoline, you need to focus on the A-92 brand. A-95 is also suitable for refueling lawn mowers, although some experts do not recommend taking fuel with such an octane rating. This is due to the fact that at many gas stations, the composition of such gasoline includes various additives and solvents (for example, alcohol). It should be borne in mind that you can’t save money in this matter. In order to extend the life of the lawn mowers, you should choose only high-quality fuel from trusted suppliers.

Oil Selection Rules

Motor oil, depending on the chemical composition, can be:

  • Mineral. Is made from petroleum distillates and is intended for low-power equipment with air cooling;
  • Semi-synthetic. Is a mixture of mineral and synthetic oils and is suitable for 2T and 4T, as well as for air and liquid cooling;
  • Synthetic. Made on the basis of esters and can be used in powerful technology, as well as for working in difficult climatic conditions.

Depending on the API classification, the following groups of oils for trim motors can be distinguished:

  • Ta. For low-power equipment with an engine capacity of up to 50 cm³ and air cooling;
  • Tv. For powerful equipment with an engine capacity of 50-200 cm³ and an air cooling system;
  • Ts. For powerful push-pull equipment (lawn mowers, chainsaws, lawn mowers, etc.) with an engine volume of 50-200 cm³;
  • Td. For boat engines with liquid cooling.

To choose the optimal oil for a particular trimmer model, it is better to take into account the recommendations indicated in the instructions. For lawn mowing 2T API-TV and API-TC class oil is usually used.

Leading manufacturers of garden equipment themselves develop and produce oils for their equipment. Such lubricant compositions most fully satisfy all the technical and operational characteristics of a specific series of trimmers. For example, for Stihl (Stihl) FS 5 lawn mowers, it is best to use Stihl HP or Stihl HP SUPER oil, for Husqvarna 143R, Husqvarna HP or Husqvarna LS oil is suitable. But for the Patriot brand, the usual mineral oil M-8B is also suitable.

Rules for the preparation of the fuel mixture

For many beginners who have bought a lawn mower, the issue of diluting gasoline with oil to make a gas mixture becomes a problem. After all, you need to know the proportions and very carefully adhere to them. The instructions for the product usually indicate in what proportion to dilute the components: 1:25 or 1:32, or 1:40, or 1:50. This means that for 1 part of the oil, you need to take 25, 32, 40 or 50 parts of gasoline and mix them.

Of course, it is inconvenient to measure in such categories, therefore it is better to determine how much oil is needed per liter of gasoline using simple mathematical calculations. To do this, divide 1 liter, which is 1000 ml, into a known proportion. The following mixing table is obtained.

Ratio Gasoline (ml) Oil (ml)
1:25 1000 40
1:32 1000 32
1:40 1000 25
1:50 1000 twenty

Most often, mineral oils should be diluted in a ratio of 1:40, and synthetic brands should be diluted 1:50. Whereas for the budget Chinese lawn mowing the proportions are completely different. 1:32 or 1:25. This is due to the fact that in low-power models made in China, a different assembly is used, and the distance between the piston and the cylinder is much larger.

Further actions have this sequence.

  1. First, pour gasoline into the container (canister), and then add the required amount of oil. If you first pour the oil, then due to its greater density it will settle on the walls of the container and mix poorly.
  2. The next step. The contents of the canister should be thoroughly mixed by means of circular motions of the closed container.
  3. After dilution to homogeneity, the fuel must be poured into the fuel tank of the lawn mowers.

Detailed and visual instructions can be seen in the.

The consequences of refueling with incorrect proportions

When diluting fuels and lubricants, it is very important to observe the ratio recommended by the manufacturer of the lawn mowers. If there is not enough oil, then on the piston and cylinder seizures are formed, which sooner or later leads to a breakdown of the piston ring.

And when excessive oil coking of the piston ring occurs, as well as carbon deposits on the piston, spark plug, etc. All this leads to severe wear of the equipment and the need for constant cleaning.

Rules for pouring the mixture into different engines

All of the above is relevant for two-stroke engines. In the case of four-stroke engines, nothing needs to be diluted and mixed. Gasoline is poured into the fuel tank, and oil is poured into the crankcase. It is important to know that in a lawn-mowing engine with a two-stroke engine, do not add oil intended for a four-stroke engine or for a liquid cooling system. Otherwise, the entire piston system will be disabled or severe overheating will occur.

Rules for storing the mixture

The remaining unused fuel mixture needs a dark, dry corner where it can stay up to 2 months. In general, there are different opinions of experts on this subject:

  • For mineral oils, the shelf life is 7-10 days, after which their lubricating properties are lost;
  • For semi-synthetic and synthetic brands there is evidence that they are stored from 30 days to 2 months.

After a longer period, it is recommended to change the fuel to a fresher and newer one.

So, the process was described in detail above, how to properly build a gas mixture for two-stroke engines of lawn mowers. To avoid damage to the trimmer as a result of insufficient oil or frequent cleaning and unstable operation due to excess lubricant composition, carefully read the instructions for use of the lawn mowers and carefully follow it.

Makita EBH341U trimmer on Yandex Market

Huter GGT-2500S trimmer on Yandex Market

Trimmer Carver Promo PBC-33 on Yandex Market

Trimmer PATRIOT PT 3355 on Yandex Market