Laughniture launch cord. Catalog

Engine launch 4 mm 2 m polypropylene color multicolor color

Looking for chains, cables and cords? Domostroy Service offers to order a cord for starting an engine of 4 mm 2 m polypropylene color multicolor Article 36671363 at price 34. In stock of chains, cables and cords in a large assortment. At the beginning of October 2022, there are discounts on delivery!

Delivery methods

• Mail
• Shipment at night at Shoplogistic orders
• Courier delivery Shoplogistic
• Pickup
• Shipment at night at the issues of issuing orders SDEK

In more detail, delivery methods can be found here

Payment Methods

• Yandex Kass
• Cash payment for the product upon receipt of goods
• Cash payment upon receipt of goods in stock
• Prepayment upon receipt in the post office
• Payment on-line through the Coin system

Other chains, cables and cords

If for some reason the cord for starting an engine of 4 mm 2 m Polypropylene Multicolor color does not suit you, pay attention to other products of the chain category, cables and cords.

The main malfunctions of the starter of the trimmer for grass

It is not difficult to determine the cause of the breakdown of the starting device. There are several main options:

These details are shown in the photo below.

It may happen that the starting mechanism will be accidentally broken. The consequences will turn out to be deplorable if the ragged rope is wound around the flywheel of a working internal combustion engine: then the spring bursts, the pulley will tear off. But such cases when a complete replacement of the starting node is required, they rarely occur. In most cases, to fix the mechanism, it is enough to put a new spring or replace the cord.

Removing and disassembling the starter, replacing broken parts

To repair the starter of the trimmer for the grass, you will need to disassemble it first, and then collect it. This process is not a particularly difficult occupation. For work, you will need a screwdriver with the tip of the desired shape.

Everything should be done carefully, observing safety precautions, mainly that the spring does not injure the master if an accident.

Parsing the starting node

They disassemble the launch mechanism in order to install new parts instead of broken in the following sequence:

• spin a screw with a screwdriver, fixing the pulley with a starter lid;
• take out a spring and antennae;
• Remove carefully with the pulley (you need to unscrew the head or work, having dressed the glasses and gloves before);
• determine why the launch mechanism has broken;
• If the spring collapses almost completely, then it is replaced;
• When the spring exits from the hook, it is installed in the original place, bending the antennae before this (the photographs show the laying process);

To change the spring, you should work carefully and accurately: it can, under the influence of the effort caused by the installation of it in place, accidentally burst. Even if you carefully remove the video, then the spring strip flies very quickly from the coil and can injure your hand with its sharp edges.

Immediately putting a springy plate in the same place does not always work. It often slips, so attempts are required to repeat until the desired result is achieved.

Starter assembly

The assembly of the starting node is carried out in a number of stages:

When making the stated manipulations, it is necessary to lay two goals. If this is not done, then the spring over time damage the plastic cup, and when it is pulled. Because of this, a feeling appears, as if the spring had flown. To eliminate such a drawback, you need to install this part of a larger length or an additional goal.

When such spare parts are absent, you can just unscrew the screw a little, and the starter knot will begin to work without shaken. But this option is temporary. it is better to repair qualitatively as quickly as possible.

Spring tension

After installing the spring, it should be pulled. The following actions are performed for this:

• Remove the handle from the starter cord;
• Then the rope is inserted into the coil groove;
• They stretch the spring, rotating the coil in the direction opposite to the clock of the clock arrow (reviews);
• make the desired number of revolutions specified in the instructions for the use of the trimmer model used and the corresponding length of the cord used;
• At the very end, the rope is threaded into a hole designed for this, located in the starter cover;
• put the handle in place, fixing it with a node.

If after the repair the spring continues to fly, then you can get rid of this in the following ways:

• Squeeze the suitable piece of the plate into the groove at the location of the spring hook;
• drill holes on two sides of the groove in the coil, into which the spring hook is inserted and fix it using a wire.

Replacing a torn cord

A torn rope is replaced in the following sequence:

• The old cord is removed;
• choose a suitable rope (thickness and length);
• Having reached it through a special hole in the coil, a knot is tied;
• Sprinkle a spring, producing the required number of revolutions;
• Fix the pen.

It is better to stretch the spring plate along with the partner so that the edge of the cord does not hit the starter mechanism.

It is easy to assemble a starter on a trimmer and wound a spring, only you should do it carefully and with caution. For different models, the gas tanks of the launching mechanisms are the same, so they are repaired in a similar way. In this case, there are some nuances associated with their constructive features.

How to make repair of the lawn mower with your own hands?

Those who have land are very familiar with what struggle is weed.

Especially when it often rains and the grass grows not by the day, but by the hour. Earlier, and sometimes even now, this issue was resolved with the help of a good old braid for grass.

But technologies are not standing still and now in this case, assistants such as electric and gasoline lawn mowers help.

The gasoline mower has several significant advantages over electric, such as mobility and lack of danger of electric shock. But there are many drawbacks, for example: high price, a lot of noise, expensive fuel and significant weight.

Electric mowers are cheaper, easier, work on inexpensive energy, and are not difficult to maintain and repair. These advantages become the main reason for their great popularity among buyers of this type of technique.

But despite the pretty good quality, improper operation and a lot of load, they can disable the device. In such cases, you should not immediately carry the device to the repair shop, but try to find and eliminate the cause of the breakdown yourself. over, as mentioned above, electric lawnmands do not have as many nodes and details as gasoline.

The main thing is to have some tools and faith in yourself. In this article, I will just show you how I did my own repair.

AL-KO, the lawn mower of the company, has serious problems in work, namely: the engine stop without load and its strong overheating, was taken as an example. The motor stops, buzzes and start it again, only re.pressing the “Start” button helps. The button has to restart almost every 30 seconds, and with further work and more often.

Of course, you can work, but it is very annoying and gives the feeling that somewhere the problem is. Therefore, I wanted to figure out where?

After the mower was working within an hour, the engine temperature was measured. It was impossible to touch him with a finger. He directly radiated heat. If you continue to pay attention and continue to work on such a mower, an electric motor will inevitably fail.

It is necessary to determine the cause of the motor overheating. To do this, remove the top cover of the case, under which the engine is located and its power chains.

The lid is held on six screws with a hat under a cross screwdriver.

Unscrew these screws and remove the lid. upward.

Having removed it, you can see the impeller, the capacitor, two connectors and the engine itself.

At first glance, no special problems are invisible. The engine winding darkened slightly from the temperature, but so far it is not critical.

To more carefully inspect the capacitor, it is necessary to unscrew the mount and pull it out.

The capacitor of some external damage did not show.

To check it, you need to disconnect the capacitor and feed the engine for a short time. If he did not start and began to buzz, then the capacitor is intact, because the engine was launched with him. Disconnect the power and connect the container connector back to the engine circuit.

Next, try to twist the impeller. It is mounted on the axis of the rotor and rotates rather tight.

And the reason for such severe rotation is a mechanical brake, which for safety stops the engine rotation when the power is turned off.

It looks like a sleeve that moves freely from top to bottom, along the rotor axis.

Когда напряжение на двигатель не подано, эта втулка прижимается верхней частью о крышку, на которой приклеено две резиновые полосы. Thus, the knife is inhibited on the rotor shaft.

When feeding, the brake sleeve under the influence of the magnetic field is drawn to the center of the rotor and provides free move.

With a careful examination, this sleeve with the brake noticed that at the time of turning on the engine, the brake is retracted and gives the shaft free rotation, but after 2-3 seconds it is released again and begins to slow down the motor. This should not be. Hence the stop of the knife during operation and overheating of the engine.

To find out what is the reason for this work, you need to remove and disassemble the engine.

To do this, disconnect the connectors and put the device on the side to get to the clamping screws. Access to them closes a knife with mounting elements.

To remove it, first you need to unscrew the knife bolt (cm. Figure below).

Direction of rotation, like a regular bolt, and not with left thread. That is, unscrew it counterclockwise, and tighten the clock.

The head of the bolt is plastic, so using the key, it must be well planted so as not to “lick” the edge.

After extracting the bolt, the knife and its plastic disk are removed.

Under it is a height sleeve. With its help, you can slightly lower the knife.

Adjustment is carried out by the washers put under the sleeve (see. drawings below).

We remove everything, only the engine shaft and the hexagonal screws of its fasteners remain.

The key for these bolts has a distance between faces of 6 mm. Unscrew them counterclockwise. Removing the last screw, with one hand, hold the engine.

Next, put the mower on the wheels, and clasping the engine with our hands. we raise it.

To disassemble the motor, you need to free tightening studs. We unscrew them all.

Remove the impeller with two screwdrivers.

We proceed to the removal of the back cover. A wooden block and a hammer will help this.

But first you need to mark the position of the covers with something sharp to the engine body.

Put the engine on the side and hit with a hammer, through a wooden gasket, on the rear shaft.

The motor at that moment should hold another person.

We hit until the axis comes out of the bearing to the end.

Starter on a chainsaw. design and principle of operation

Genkets, although they have different names, are constructively similar. The trigger mechanisms of the benzargates are also similar to the engine, with which the engine is launched. Mechanisms for launching an internal combustion engine are suitable for chainsaws of different brands Stihl, Husqvarna, Dolmar, Makita and others. Structurally, the starter for the chainsaw consists of the following elements:

• The drum on which the cable is wound
• Cable with which the crankshaft of the tool is given in motion
• Pen for the convenience of using the mechanism
• The frame with the spring, thanks to which the cable is wound on the drum (returns to its original position) when the saw launches the engine

The principle of operation of such a device is simple. With a sharp rise in the handle of the mechanism, the cable stretch. The cable introduces into the cloth with the ratchet, transmitting the movement to the drum with slots. This is how the crankshaft moves, which makes several revolutions. At this moment, a working mixture is compressed in the cylinder. As soon as the handle returns to its original position, the connection of the ratchet with the slots is disconnected, and the shaft ceases to rotate.

With each subsequent jerk, the cable increases the amount of fuel-air mixture in the cylinder. So that the cable is returned to its original position, are used in the design of the starting mechanism of return springs. They are made of elastic steels. It is this spring that often causes a malfunction of the starter of the unit, which can be repaired.

Modernization of a hand starter.

I have not been on the forum for a long time, everything changed much made a long idea, replaced the cord in a hand starting starting trigger in the same way changed the output so that there was no fracture yet, I still see where to insert the photo

Well, a photo of the U

Vladikom wrote: From the photo it seems to be as it is clear

I have a cable for a long time. In this option will not work. He will quickly wipe the hole. A large diameter hole is needed. I set the guide video, after it you can pull in a wider version.

My thoughts are digging only in my head. Eh will take a swarm to the cottage, yes for the weekend.

Well, judging by the pictures there was piston there. I also have enough grandchildren. The video is certainly good, but as if if there is an opportunity to implement. I have this opportunity, but I deliberately bypass excessive bells and whistles.

Well, judging by the pictures there was piston there. I also have enough grandchildren. The video is certainly good, but as if if there is an opportunity to implement. I have this opportunity, but I deliberately bypass excessive bells and whistles.

Pavel-61. If it is possible to pull exactly, I almost agree. I tried it myself and the cable (braids, smooth, in braids), you have to pull to the side, wipe it at a time.

My thoughts are digging only in my head. Eh will take a swarm to the cottage, yes for the weekend.

Jesha wrote: you have to pull to the side, wipes at a time.

I don’t argue, just the opinion of the user. You have a decompressor? On my DM Trosik for more than 15 years, traces of wiping only outlined. On the Chinese 3rd year, I immediately put a cable with a sleeve, there are no hints. But if just a cable without a cartridge, then yes, the tin is not a tenant and

Well, judging by the pictures there was piston there. I also have enough grandchildren. The video is certainly good, but as if if there is an opportunity to implement. I have this opportunity, but I deliberately bypass excessive bells and whistles.

Pavel-61. If it is possible to pull exactly, I almost agree. I tried it myself and the cable (braids, smooth, in braids), you have to pull to the side, wipe it at a time.

Jesha. no one has such an opportunity, if not a robot, of course. Metal cable start a one.axle tractor? Although everyone has their own cockroaches in their heads. It can be better to use a round fishing line for a trimmer for a trimmer for grass, while you get something normal. Yes, now this rope for chainsaws in each specialized store is sold.

How tight a spring is?

Give the spring the right potential effort required for a clear and quick cord toleure can be determined by determining the length of the cord in turns. So that the handle of the cord does not hang, add another 1-2 to the number of turns. So, if the cord has a length of 5 turns of the coil, then when the spring is screwed, scroll the coil at 6-7 full revolutions.

Assembly of the starter motorcycles

When servicing and repairing the starter, it is important to assemble it correctly-as if the manufacturer performed the assembly of the device. Any of the details, incorrectly installed, will not allow you to fully use the trimmer or motorcycle.

• Having wound the spring, turn the coil and put it so that the second spring hook gets back to its place. To control the correct installation of the spring on the coil itself, there are technological windows.
• Put the starter pulley and make sure that one of the hooks of the spring enters the groove located on the starter cover.
• Insert a spring and washers on the sides so that the spring does not wash the plastic compartment in which it is located. If the spring is broken, and the other is not the same, an additional washer is placed instead of it.
• Insert a cup with antennae in the grooves of the coil.
• Set the coil in your place, tighten the bolt until it stops, but without fanaticism.

If you do not protect the jubes from the main spring compartment, where it moves when it is filled and unwinding the starter cord, the coil often shows when you are trying to start a benzotrimer or a motorcycle. The weakening of the coil bolt will lead to its loss.

How to assemble a starter of a trimmer for grass motorcycles, moisten in the video.

Laughniture launch cord

Company MV Group Official DDE dealer in the territory

Only original certified product!

Official guarantee for tool maintenance!

The ability to order the required tool or spare parts from the manufacturer!

For customers from the regions, the service delivery service is valid by mail, the company sends spare parts for garden equipment by mail cash on delivery. This is done exclusively for the convenience of our customers, because we ourselves know firsthand that a year is feeding a year, and the sooner you will repair faulty equipment, the richer you will have a crop!

If you have chosen delivery by cash on delivery, then upon receipt of the goods in the mail will be taken into account:

• The cost of goods
• The cost of sending
• The cost of packaging and insurance (for one parcel is 200-350), this value can change as it is affected by the dimensions of the parcel, the cost of the goods and the mass
• Orders with cash on delivery weighing up to 2 kg are sent by parcels
• Orders with cash on delivery weighing up to 10 kg are sent by package
• According to mail rules, a parcel or parcel, not in demand by the recipient for one month, is returned to the sender. In addition, you will have to pay extra for the storage of a parcel of more than one week.

In the event that you are from us at a greater distance, do not part, we will take your purchase at least to the ends of the world, while the cost of delivery will be extremely attractive to you!

Payment method:

If you pay for an order at once, there is no way and additional commissions do not scare you. We will send an order without prepayment and upon receipt in the mail you can pay for it.

Service Center of the Partsad online store store.Ru: force to “breathe” any garden technique!

We are glad to welcome you on our website and thank you for the trust in our company!

Any garden technique. This is, first of all, a complex mechanism, which at a certain time requires attention and, if you do not comply with the rules for their operation and do not conduct a timely technical inspection, repair cannot be avoided. We are ready to help you with this!

We guarantee the reliability and high quality of materials and work performed. We are representatives of most famous brands in the city of Vladimir, for this, we have direct deliveries of spare parts from manufacturers, and our masters constantly improve their level of qualifications. All this helps us to repair any garden equipment with high quality and on time.

Labric cords for starters. 158 goods.158 goods

Hand starter assembly for portable gasoline generators Huter HT950A. Technical characteristics brand Huter Country Brand Germany Production China Type of components starter weight without packaging 0.54 kg weight in package 0.57 kg

Hand starter assembly for portable gasoline generators Huter DY2500L. DY4000L/LX

Type of spare parts: for the starter, spare parts for the starter: launcher rope

Type: starter, purpose: for a benzotrimer, manufacturer of garden technology: Husqvarna, Material: Plastic, Weight: 0.20 kg

Starter cord length cord (bay) M: 30 diameter of the cord mm: 4.76 Material: nylon manufacturer. SPI

Type: spare part, type of spare part: for the starter, spare parts for the starter: launcher rope

The starter cord DDE 241-604 is used in chainsaws and lawn moutines. Designed to start engine. Made of nylon. It comes on the coil. Length. 30 m. Diameter. four.5 mm

Type: accessory, type of spare part: for the engine, for the starter, another, spare parts for the starter: launcher rope

Diame PVD00606 Starter wire VAZ 2101-07 Auto-Electro Dials PVD006-06

Type: launch wires, length: 3 m, maximum current: 250 a

Type: cord, film type: stretch-film, form of release: coil, length: 186 mm, width: 186 mm, height: 75 mm

Type: thread, length: 5000 mm, width: 4.50 mm, height: 4.50 mm

The starter cord DDE 245-213 is used in chainsaws and lawn mowers. Designed to start engine. Made of nylon. It comes on the coil. Length. 20 m. Diameter. 6 mm

Используется в двигателяхМодель09D902-2229-B110G902-0122-B110T502-3146-H110T602-0131-B131C707-0571-B1122R05-0117-H1122S07-0987-H1124T02-4174-B1124T02-6174-H1215807-3332-B109T502-0124-B1123K02-0301- E1122T02-1154-B1122T02-1158-B1122T02-1207-B109A413-0202-E1122T02-1243-B111.

The starter cord DDE 241-611 is used in chainsaws and lawn moutines. Designed to start engine. Made of nylon. It comes on the coil. Length. 30 m. Diameter. 5 mm

Use a cord to repair or assembly a full lamp. A comfortable switch is located on the wire, which has two provisions: “Inclused” and “off”. Install the product in the electrical appliance and control it with one press

Type: starter, purpose: for a trimmer for grass, manufacturer of garden technology: Huter, Material: Plastic

Type: starter cover, car model: Lada Priora, Lada 2110, Lada 2111, Lada 2112, Lada Kalina

Cords for starters

Hand starter assembly for portable gasoline generators Huter HT950A. Technical characteristics brand Huter Country Brand Germany Production China Type of components starter weight without packaging 0.54 kg weight in package 0.57 kg

Starter cord on the reel DDE 4.0mm 30m (nylon)

Manual starter cord, 5.0 mm bay 100 m 101705

Diameter wire of the starter diameter 2101 PVD006-06

Starter cord length cord (bay) M: 30 diameter of the cord mm: 4.76 Material: nylon manufacturer. SPI

Starter cord diameter. 5.5 mm (5 meters)

Starter Cord DOUBLE BRADED 05-208-03

Stanley cord in the Fatmax Xtreme 0-47-480

Cord with switch and fork Feron KF-HK-1

Manual starter cord, 5.0 mm bay 100 m 101705

Starter cord for chainsaws and motorcycles with a 3.5mm 5 meter dimeter

Type: accessory, type of spare part: for the engine, for the starter, another, spare parts for the starter: launcher rope

Rezer Starter Rope 6,0×100 launched rope

Use a cord to repair or assembly a full lamp. A comfortable switch is located on the wire, which has two provisions: “Inclused” and “off”. Install the product in the electrical appliance and control it with one press

Cord with switch and plug Tundra 1447526

Suzuki DT8-75/DF25-30, D-6MM manual starter cord, mettage 990008115950_M

The forks of the Bendix of the starter Hyundai/Kia 36131-32510

Generator and starter wire Land Rover LR107822

Aurora Start Cables 250

High voltage cord 140L (OLD 178-20549-20/6687887) for the Hitachi TBC 340D lawn mower

The starter cord DDE 245-213 is used in chainsaws and lawn mowers. Designed to start engine. Made of nylon. It comes on the coil. Length. 20 m. Diameter. 6 mm

Starter cord on the reel DDE Bay 6.0mm 20m (nylon)

The starter cord DDE 241-611 is used in chainsaws and lawn moutines. Designed to start engine. Made of nylon. It comes on the coil. Length. 30 m. Diameter. 5 mm

Starter cord on the reel dde Bay 5.0mm 30m (nylon)

Используется в двигателяхМодель09D902-2229-B110G902-0122-B110T502-3146-H110T602-0131-B131C707-0571-B1122R05-0117-H1122S07-0987-H1124T02-4174-B1124T02-6174-H1215807-3332-B109T502-0124-B1123K02-0301- E1122T02-1154-B1122T02-1158-B1122T02-1207-B109A413-0202-E1122T02-1243-B111.

Mokasin cord, color: yellow, 1.5 mm x 100 m, art. 1 S-16

Type: cord, film type: stretch-film, form of release: coil, length: 186 mm, width: 186 mm, height: 75 mm

Cord lactated polyamide starter F4 mm (100 m)

Relay retracting starter for Ford Transit (06-) 2.2D Startvolt

DDE starter cord on a coil Bay 3.5mm 30m (nylon) 241-581

Relay retracting starter for VAG TOUAREG cars (05-) (10-) 3.6FSI Descriptions: Article: VSR 1809 OEM numbers: 076911287, 2 339 305 037, 2 339 305 071, 2 339 305 118, 2 339 305 292, 2 339 305 338 voltage, B: 12 ​​diameter of threaded connections: 43.5 threads: M5 T.