Lawn Mower Buzzes But Doesn't Twist

You got water into the machine, plugged it into the network, filled with washing powder, and the washing machine does not spin the drum? The situation is not pleasant, but such a problem is quite common not only with Indesit, but also with other manufacturers. What are the reasons, and what to do in this case?

Breakdown diagnosis

So, first you need to stop panicking, because this business certainly will not help. The first step is to disconnect the washer from the mains. Next, drain the water manually, using a special filter, clean the drum from the laundry and figure out at what exact moment the washing machine did not “want” to twist it:

  1. In the spin process. In the event that the laundry is damp, but not clean, we can say that the problem occurred during the spin cycle.
  2. In the process of washing. In the event that the laundry turned out to be soapy, then most likely the problem appeared during the washing process. Try to scroll the drum by hand and check if it is jammed.
  3. Washing machine drum rotates by hand, but not during washing. If such a problem occurs, then it must be considered comprehensively, because there can be several reasons for this:
  • Belt malfunction.
  • Deterioration of brushes of the electric motor.
  • Faulty electronic module.
  • The problem with the programmer.
  • Damage to the electric motor.

Laundry overload

If the drum does not rotate, the first step is to review the amount of laundry that has been loaded and try to load only half. Almost every modern machine is equipped with special sensors that signal an excess of the norm by displaying an error code on the display, or by means of sound signals. In the event that you do not have a screen, the problem can be identified by the fact that the drum will simply stop spinning.

Lawn Mower Buzzes But Doesnt Twist

If, for example, you have earned an old Aristoni machine with half the laundry, you can breathe a sigh of relief, because there are no problems with its performance. The main thing is to follow all the recommendations from the manufacturer and try not to exceed the norm, then the washing machine will serve you for a long time.

In fact, there are a lot of reasons why the washing machine refused to spin the drum.

If the tank is spinning by hand

When you can spin the drum by hand, but it doesn’t do it during washing, you should consider a number of common malfunctions due to which this could happen.

Powertrain belt tore

The most common problem when the washing machine is not spinning is belt wear drive of the power unit, due to which it can weaken a little or even break off. Be that as it may, it will definitely need to be replaced. Sometimes the belt is in order, and you just need to return it to the pulley from which it slid. To do this, remove the cover on the back of the washer and look at the belt. If it just flies off, you need to put it on again and restart the machine. In case of damage. replace with a new one. Why the belt flies. read here.

You may also like

  • how to sharpen a do-it-yourself angle grinder, machine, how to sharpen a circle at homeThe use of circular saws is especially common in construction. Most of the work requires cutting and changing the shapes and sizes of finished materials. The circular saw helps to cope with suc...
  • This article will solve the problem of gas mowing when they stall at high speeds on gasBuild your house!Benzokosa stallsWhen buying a brushcutter, you need to be prepared for the fact that, like in all other similar tools, breakdowns may also appear in it that will require repair...
  • For example, you can calculate the instantaneous (instantaneous) consumption, that is, the amount of fuel consumed at a given time, using the on-board computer. It displays a lot of useful information, including the average gas consumption per 100 km, the fuel consumption rate fo...

Video: Lawn Mower Buzzes But Doesn’t Twist


Software module malfunction

A software module may also break. If the problem is this, then during the washing there is simply no signal that the machine has started to rotate the tank. In order to correct this situation, it is necessary to enlist the support of a wizard who can “flash” the program module or completely replace it with a new one.

Problem with brushes on the electric motor

If the machine does not spin the drum, then it is possible that the problem lies in the breakdown of the power unit or the wear of its brushes. This is especially true in cases where the device is often subjected to stress or the model is quite outdated. When the brushes are worn, they must be replaced. I am glad that their cost is not high enough, and the replacement process itself is as simple as possible.

Powertrain malfunction

A broken power unit can also cause the drum to stop spinning. Despite the fact that this does not happen so often, this breakdown is quite serious. over, there can be a lot of problems: it can buzz or not show any signs of life. In this case, it is better to seek help from a specialist.

You may also like

  • Posted by Look Tool 1 years ago Search Look Toolhow to assemble the trimmer starter yourself, bend and wind the spring, as well as wind the starter rope. As usual, as you can see, by watching my video you can easily wind the starter spring on the trimmer yourself and without nerv...
  • Why it may be necessary to adjust the carburetor even if it seems to start and work? Carb adjustments should be optimal.In general, the carburetor has a very important effect on the operation of the chainsaw, it is its "brain" indicating how much air and fuel mixture to...
  • Angle grinder (angle grinder). she’s an “angle grinder”. it is a power tool that is a type of grinder. The set of its “functionality” includes various operations related to cutting, cleaning and grinding of parts from any materials. Scope: metalworking, construction, domestic nee...

The power unit almost always does not work for the same reason. leakage.

Some experts, to find out if it is working, connect it directly to the electrical network.

The drum in the washing machine is jammed

If the drum starts to jam and you cannot scroll with your hand, it means that a foreign object is stuck in it. Sometimes the cause is a breakdown of a particular part.

Foreign object

A spinning tank may stand up due to a common problem such as the presence of a foreign object in the space between the drum. Because of this, its normal rotation is impossible. The most common cause is coins or other items that were in your pockets. In order to remove them, you need to remove the back cover, unscrew the heater, and then try to get a foreign object through the hole.

It is strongly recommended that you check all pockets before sending clothes into the machine!

Drum bearing failure

If the drum of your washing machine does not spin, the cause may be wear or complete destruction of the bearing. This happens in the following cases:

  1. Bosch washing machine whose drum does not spin,it may be quite old, which is why the bearings used up their operational stock.
  2. Frequent use of additional chemistry, which removes plaque and at the same time negatively affects the seals.
  3. If the washing machine stopped turning the tank, then the problem may lie in the seals, which have never been lubricated, which is why they dried out and the water got on the bearings.

Any of these causes may affect bearing failure. The washing machine at this time is buzzing, but not spinning. In order to replace these parts, you need to acquire a serious professional tool. This is due to the fact that it will be necessary to almost completely disassemble the machine. If you are not confident in your abilities or do not have the skills and tools for this, it is best to use the services of specialists.

It is worth noting that some car models are not designed to replace this part, so you will have to buy new equipment.

The washing machine drum is spinning badly

So, if the drum does not spin at all in the washing machine, then the problem is clear. But what if it spins very badly, but still does it? Experts attribute this to long service life apparatus. That is, you must be prepared for the fact that the machine may soon break down.

There may be several reasons why the drum does not spin at all in the washing machine or does it with difficulty:

  • bearings have expired;
  • the presence of a foreign object;
  • worn belt;
  • problems with the power unit.

In any case, if you have a jammed drum in a running washing machine, it has begun to rotate worse, or refused to do so at all, you must immediately stop using it and contact a specialist to identify and fix the problem.