Miter saw metabo ks 216 m overview

Criterias of choice

Before purchasing a tool, you should read the technical documentation. It contains all the parameters and technical characteristics, operating conditions and rules for safe work. It all depends on the purpose for which the instrument is being purchased. If work is planned only occasionally, a miter saw with normal functions is sufficient. Professionals will need a better quality tool that is more resistant to stress and tough cuts at all angles.

Let’s take a closer look at the Metabo 49716 meppen miter saw on the example of the models of this series KGS 216 M and KGS 254 M. They differ slightly from each other, therefore their performance and characteristics are approximately the same. Both tools operate on a 230 volt mains voltage with an operating frequency of 50 Hz. The current consumption is respectively 7 and 8.7 A. For protection purposes, a 10 A slow-blow fuse is installed on each saw. The power of the electric motors is 1.5 and 1.8 kW. Protection degree. IP20, protection class. II.

The saw blade of the Metabo KGS 216 M and KGS 254 M miter saws rotates at a frequency of 5 and 4.5 thousand revolutions per minute, the cutting speed for both is 55 m / s. The outer diameters of the saw blades are different. 216 and 254 mm, the inner diameter of each is 30 mm.

The overall dimensions of the tools in working order in length, width and height will be 820x543x355 and 850x620x400 mm, weight. 14 and 17.5 kg. That is, the Metabo 254 M miter saw is slightly larger, heavier and more productive and more suitable for professional work.

Performance and functionality

The miter saws KGS 216 M and KGS 254 M can perform a wide variety of operations. The main actions are as follows:

Metabo KS 216 M Mitre Saw Calibrated!

• Possibility of straight cut with dimensions in width and height: for KGS216 M. 305/65 mm, for KGS254 M. 305/90 mm.
• Bevel cuts with 45 degree rotary table in width and height: for KGS 216 M. 205/65 mm, for KGS 254 M. 205/90 mm.
• Tilted cut with tipping arm to the left 45 degrees in width and height: KGS 216 M. 305/36 mm, for KGS 254 M. 305/47 mm.
• Double slanting cut with a 45-degree rotary table and a 45-degree tilting arm to the left in width and height: for KGS 216 M. 205/36 mm, for KGS 254 M. 205/47 mm.

A lot depends on choosing the right saw blade. Its dimensions must correspond to the normative ones specified in the technical documentation. Too small a diameter will negatively affect tool performance, and a saw with too large a diameter will have a reduced service life.

When choosing one or another saw, you should pay attention to the material from which it is made, the geometry and quality of sharpening of the teeth of the cutting part. We recommend purchasing discs for Metabo 49716 meppen with different teeth. Some are excellent at cross-cuts, others make longitudinal cuts at high speed, and still others ensure high quality and cleanliness of the cut. Some disc modifications are equipped with thin slots and wavy lines to reduce noise, compensate for metal expansion at elevated temperatures during operation.

The possibilities of the Metabo Meppen miter saws are greatly enhanced by the laser pointer, which ensures maximum cutting precision. This feature is especially important when making changes to angles and making difficult bevel cuts.

A Metabo saw will last significantly longer if it is serviced and maintained promptly at the end of the work. First of all, using a vacuum cleaner, sawdust and wood dust are removed from the following places:

• Adjustment devices and controls.
• Motor cooling system components.
• Space under table insert.
• Intermediate clearance above the laser module.

Equipment

Each Metabo trimmer is equipped differently, depending on the price of the product and the overall level of equipment. Most products include:

• Feed system and cutting depth limiting device.
• Retractable stops.
• Laser marker pointer.

This list includes the following products:

• Storage compartment for saw blades and other accessories.
• Special spray for tool maintenance and care. Removes resin residues and protects metal surfaces.
• Adapter to the branch pipe. Connects to the device for the purpose of suction of sawdust.
• Height-adjustable table stand and table extension.
• Carbide saw blades for longitudinal and transverse cuts in wood, chipboard, fiberboard, plywood, plastic profiles, cable ducts.

Overview of the Miter Saw from Metabo

In the carpentry industry, when processing wooden structures and blanks, the accuracy of cuts and cuts, both straight and at various angles, is of great importance. It is difficult to achieve the desired results manually, which is why the Metabo miter saw has long been used for this type of work. The tools are highly accurate and productive for the production of window frames, door blocks, floor coverings and other wood products.

• Criterias of choice
• Performance and functionality
• Equipment
• Benefits

Benefits

• Wide range of cutting angles, fixed at nine points.
• Cutting grooves more accurate thanks to the integrated depth gauge.
• Aluminum alloy main structure ensures precise operation.
• All Metabo branded saw blades are carbide-tipped. Replaceable quickly and easily without removing the cover.
• The presence of a broaching device for cutting wide parts.
• The table can be extended when working with long workpieces.
• A special device securely fixes the workpieces.
• The incision area is illuminated.

Miter saw Metabo KGS 216 M GL. this is another modification of the legendary wire feed saw from Metabo. This model features upgraded control electronics, laser and illumination, as well as an integrated green laser, which is much better visible in daylight.

Miter saw Metabo KGS 216 M GL

Contents of delivery

Specifications

Order in one click

Key Features

• Reliable engine with high tractive effort and resistance to heavy loads.
• Strong and durable frame made of die-cast aluminum with a large number of stiffeners.
• Convenient, well-thought-out design, low weight of the tool, compact size, well-positioned handle for transportation. everything makes the Metabo trimmer a convenient and effective tool for daily work.
• The mechanism for adjusting the angle of rotation of the table in the Metabo KGS 216 saw is very convenient and smooth in operation. The angle can be easily and precisely fixed in the desired position. Special markers are provided to quickly fix the table in the most frequently used corners.
• The feed function allows cuts up to 305 mm wide. High accuracy and reliability, achieved through bearings with reliable protection against dust and broach pipes with mirror polish. Time-tested!
• The saw head can also be tilted to the left and locked at an angle of up to 47 °.
• Changed, compared to the previous generation model, the location of the swarf channel. Now the sawdust is collected directly at the point where the disc exits the workpiece, which significantly increases the efficiency of collecting sawdust.
• Table extensions are easily removable and can be installed at any distance from the saw. So you can work with any length of work piece with ease.
• The KGS 216 GL saw has Green Laser technology for maximum visibility of the cut in any light. The laser and LED lights are mounted on top of the protective casing, which increases accuracy and convenience, as well as eliminates the ingress of chips. They do not require the use of batteries to work.
• The clamping clamp and side stops on the table extensions allow you to clearly fix the workpiece and make an accurate cut.
• Cutting depth gauge allows you to quickly and easily cut a groove on the workpiece.
• All scales and controls are easy to read and easily accessible from any working position.
• Sophisticated and convenient saw blade changing system. The spindle is fixed with a special button, after which the clamping nut is easily unscrewed. Removal and installation of the disc does not require disassembling and assembling the protective cover.

China. The country of manufacture

Metabo Shop’s answer
Good afternoon Saw is made in China, at the Metabo factory

Oleksandr (11/21/2020)
Rating:

Good day. The description says “The angle of inclination of the saw head left / right 45 ° / 2 °”?

Metabo Shop’s answer
Good day. Kut nahilu right-handed all 2 degrees

nikolay (02.11.2020)
Rating:

kind, smooth start is?

Metabo Shop’s answer
Good day. Unfortunately, no soft start is provided.

Miter saw Metabo KGS 216 M

Instructions Miter saw Metabo KGS 216 M

Features Miter saw Metabo KGS 216 M

Description Miter saw Metabo KGS 216 M

Miter saw Metabo KGS 216. Highly reliable professional grade tool suitable for various sawing jobs on soft and hard wood, plastic and non-ferrous metals. Indispensable for finishing work. There is a scale on the side stop of the saw for precise work. The work table of the tool is made of die-cast aluminum, which increases the strength and durability of the saw.

Due to the high stop profile, the workpiece is securely clamped. For a clean workplace, the saw is equipped with a sawdust collection bag. For the convenience of work, there are: laser and backlight Functionality, reliability, convenience and ease of use ensure the Metabo KGS 216 in high demand among consumers.

Contents of delivery:

• miter saw Metabo KGS 216 M
• saw blade 40 teeth
• transport handle
• 2 table extensions
• adjustable stop profiles
• clamp for fixing the workpiece
• disk replacement key
• dust bag
• cardboard box

Features of the model:

• Cleanliness of the workplace. To keep the workplace clean, the tool is equipped with a sawdust bag.
• Precision of work. The side stop with a scale ensures precise sawing of the workpiece.
• Convenience. The handle of the Metabo KGS 216 M 0102160400 miter saw has a rubber pad for safe and comfortable work with the tool.
• Stationary use. Thanks to special holes in the body, the saw can be attached to a workbench or bed for stationary work.
• Changing the position of the table. The saw is equipped with a handle for changing the angle of rotation of the table.
• Reliability. Die-cast aluminum table increases tool strength and durability.
• Fixing the workpiece. A special clamp is provided for secure fixation of the workpiece.

Benefits:

• Built-in laser increases cutting precision;
• Cutting depth adjustment;
• Transport lock;
• Powerful engine;
• Illumination is provided. for comfortable work;
• The saw is equipped with an additional rubberized handle for easy transportation of the tool;
• Cutting of wide workpieces is possible due to the horizontal movement of the saw head;
• Swivel left / right 47 °, head tilt 45 ° / 0 ° (clockwise / counterclockwise).

Miter saw Metabo KS 216 M Lasercut (619216000)

Rim diameter:

Maximum cutting depth 90 °:

Cutting width 90 °:

• All
• Construction vacuum cleaners
• Network extenders
• Cutting tables
• Work gloves
• Saw blades

The Metabo KS 216 M miter saw meets all the required professional tool standards. This model was updated at the end of 2014, created using modern technologies, with careful fitting of parts and elaboration of the working mechanism. The perfectly balanced design allows the craftsman to hold the instrument for a long time without feeling any discomfort. The improved saw has an extremely light weight, which favorably distinguishes the tool among its counterparts. The compact saw attracted the attention of not only professionals, but also DIYers, as it does not require much space to work and is an extremely mobile tool, due to its weight of about 9 kg. The carrying handle is covered with a rubberized compound for a more comfortable grip. A special mechanism locks the saw in the folded position. The unit is attached to the workbench using a stationary mount and 4 holes.

Long life engine

Unboxing Metabo KS 216 M Lasercut Mitre Saw [Episode 53 18 feb 2018]

An electric motor with a power of 1350 W with low power consumption develops 5000 rpm. An electric motor with a long service life has the necessary protection against overheating and overload, which prolongs the safe operation of the tool.

Solid aluminum table

The aluminum table has an increased degree of wear resistance, due to the lightness of the metal, it was possible to keep the product lightweight. The next characteristic of aluminum alloy is strength and reliability, which is important when working with bulky workpieces.

Rotation of the table in two directions up to 47 degrees

The table can be turned in both directions, depending on the complexity of the operation being performed. The angle of rotation is increased to 47 degrees. Several points can be fixed, the most commonly used angles are 5, 22.5, 30 and 45 degrees. The table has a metric scale in 1 degree increments.

Miter cut

Tilting the saw blade allows you to make cuts at an angle, which is why the miter saw is appreciated. The Metabo KS 216 M trimmer has a tilt mechanism to the left from 0 to 45 degrees. The disc tilt travel is 2 degrees. When the master presses a special button, the disc tilts an additional 2 degrees. Exceptional tilt accuracy. Quick adjustment of the selected position. an added benefit of the power tool.

Best Value Hobbyist Miter Saw? KGS 254/216 M 3 Year User Review

Saw line laser indication

The accuracy of the cut is affected by the illumination of the working area and the laser pointer. The illumination is carried out by white LEDs, it is located next to the cutting disc, there is also a red laser. The high position prevents chips from falling on them. The laser displays a straight line that accurately indicates where you will cut.

Sliding table extensions

The two removable extensions can be extended to any distance from the saw for cutting long workpieces. Retractable rods increase machining area and workmanship options.

Cutting depth stop

The foreman can limit the depth of the saw blade. For this, there is a hexagon in the design. By turning the part, the operator adjusts the thickness of the cut. Returning the disc to its original position after performing the operation also has its own regulator, it is responsible for the lifting height. That is, the stroke range of the cutting unit can be adjusted as needed.

Quick-clamping clamp

The accuracy of the cut directly depends on the fixed position of the workpiece. The clamp has a quick-clamping mechanism that allows you to fix the part in height. To do this, you need to click on the button. over, the mechanism can press the part not only to the work table, but also to the stop at an angle of 90 °.

Chip collector

At the back of the tool there is a special connection for connecting a vacuum cleaner or connecting a cloth bag for collecting chips. This is necessary in order to keep the workplace clean and so that the technician does not breathe dusty air.

Miter saw Metabo KS 216 M Lasercut 619216000

Miter saw Metabo KS 216 M Lasercut (619216000)

Metabo Miter saw Metabo KS 216 M Lasercut 619216000

Miter saw Metabo KS 216 M Lasercut

The German brand Metabo is famous for its balanced ratio of price and quality of its products. The sawing machine KS 216 M Lasercut 619216000 costs about € 125, while it combines the qualities of more expensive models from competitive brands.

Buy Metabo KS 216 M Lasercut 619216000

Miter saw Metabo KS 216 M Lasercut 619216000

Safe and easy to maintain

For a clean and safe work, the machine is equipped with a dust and swarf extraction system. All debris is collected in a fabric bag that can be easily removed and cleaned. If desired, an industrial vacuum cleaner can be connected to the system. Thanks to the spindle lock, it is convenient to replace the saw blade without the need to dismantle the protective cover.

Miter saw Metabo KS 216 M Lasercut

• Invalid phone number format!
• Message sent successfully

Features Miter saw Metabo KS 216 M Lasercut

Instructions Miter saw Metabo KS 216 M Lasercut

Description Miter saw Metabo KS 216 M Lasercut

Miter saw Metabo KS 216 M Lasercut. designed for straight and angled sawing of wood, plastics, finishing materials or panels. A backlight is provided to illuminate the working area. There is a laser that ensures accurate cutting. Saw table swivel /. 47 degrees, saw head tilt 45/0 degrees. To ensure the cleanliness of the workplace, the set includes a bag for collecting sawdust. There are holes on the base of the saw for attaching it to a workbench or bed for stability of the tool.

Contents of delivery:

• miter saw Metabo KS 216 M LaserCut
• saw blade 40 teeth, wood
• clamp
• 2 table extensions
• carry handle
• dust bag

Features of the model:

• Cutting precision. There is a scale on the side stop for more accurate work.
• Position selection. The rotation of the turntable allows you to select the optimal angle for comfortable work.
• High movable stops. The Metabo KS 216 M LASERCUT miter saw has high adjustable stops for clean cutting and holding small and large workpieces.
• Durability. Tool table made of durable aluminum alloy.
• Saw blade blocking. There is a saw blade lock for easy and safe tool change.

Benefits:

• Rubberized handles for secure hold during work and easy portability;
• The engine is installed across the body. free view of the cutting area;
• The motor is protected against high starting loads;
• There is a laser for accurate indication of the cut;
• Integrated cutting depth setting.

Miter saw Metabo KS 216 M Lasercut

Advantages: Weight without sliding platforms and clamp = 9.4 kg.! The price tag is fabulous! Laser marker and LED illumination from the mains! Cuts everything smoothly and smoothly with the right blade!

Prof. installation of interior doors, I was looking for light and prof. “trimming” and this is exactly it Metabo KS 216 M Lasercut. I am using.

The Metabo KS 216 M Lasercut miter saw is the smallest and lightest tool among those miter saws that such a world-renowned power tool manufacturer as Metabo can offer us at the moment. The compactness of this saw and its lightness created the ideal conditions for mobile use of this tool, which would imply the constant transportation of the saw from one site to another. over, for ease of transportation, the Metabo KS 216 M Lasercut miter saw has a lock that holds it in a folded position, which ensures its safer transportation. Also for these purposes, the saw has an upper carrying handle, as well as side handles. Anti-slip grip on handles and top carry handle for a more comfortable and secure grip.

The compact miter saw Metabo KS 216 M Lasercut, like its large-sized counterparts, will be used for sawing wood, its derivatives, as well as plastic and multilayer materials of various types. The turntable of the model makes it possible to precisely set the desired angle of rotation. The table is cast from lightweight and durable aluminum. On both sides there are extendable table extensions with built-in stops. The laser, available on the Metabo KS 216 M Miter Saw, helps to precisely determine the location of the cut, increasing the accuracy of the task. All setting scales of the instrument are well readable and visible from the user’s workplace. The saw also has illumination, which helps to have an even better view of the working area, and to maintain cleanliness, the tool has a dustbin, into which dust and chips formed during work are directed.

If you haven’t received a promo code. write to

Advantages: Weight without sliding platforms and clamp = 9.4 kg.! The price tag is fabulous! Laser marker and LED illumination from the mains! Cuts everything smoothly and smoothly with the right blade!

Advantages: Dimensions, illumination of the working area, laser pointer. Lateral support of the part. Clamping clamp.

Disadvantages: When cutting workpieces with a width of 150mm (I understand that it is not provided for these sizes) there is not enough clamp size to clamp the workpiece.

Good saw, though there is nothing to compare with. He does his job with a bang. It is necessary to adapt or adjust to laser marking.

Metabo KGS 254 M

The saw differs from the previous model in the increased engine power to 1450 watts and the implementation of measures aimed at:

• to stabilize operating parameters;
• increased operator comfort;
• extension of the structure resource as a whole.

In particular, the pre-set cutting depth at working corners was increased to 47 and 92 mm, the width remained unchanged, respectively 205 and 305 mm.

In the design of the tool and weighing 16.3 kg, the function of horizontal movement has been improved, the operational properties of the retractable stops and clamps of workpieces are improved.

Structural properties

The characteristic features of the model range of Metabo saws are light weight, an ergonomic layout of components and systems, a lightweight aluminum table, the presence of a full LED backlight and a laser marker.

The most convenient and productive miter saw with a broach for processing long workpieces. Stable performance is facilitated by a wide range of operational adjustments, accurate setting of angular, inclined and combined cuts.

Advantages and disadvantages

The saw-and-cross-cut model range of the Metabo brand is inferior to similar analogues in terms of operator comfort, but in terms of productivity and quality of sawing work it is on the same level.

A number of criticisms are addressed to models of the Chinese assembly. In particular, there is an ineffective operation of the dust collector, the lack of a full fixation of the settings of laser markers. Leaves much to be desired in detachable saw equipment.

Metabo KGS 216 M

A household-class model with the function of broaching long workpieces is driven by an electric motor with a rated power of 1200 watts. The saw blade with a diameter of 216 mm allows for high precision work on wood, plastic and metal materials.

Adjustable cutting depths 36 and 65 mm, width. 205 and 305 mm.

In the standard set:

• laser marker and bright diode illumination;
• horizontal movement mechanism;
• fabric dust collector;
• fixed setting of working angles.

The list of advantages of the KGS 216 M model is small, within 14 kg weight, compact dimensions, the possibility of manual transportation and work in desktop and floor placement.

A brief overview of the brand range

A relatively small range of miter saws allows designers to concentrate efforts on further improving the range.

Potential buyers are given the opportunity to choose a tool with an optimal combination of cost and performance.

Miter saws Metabo: product range overview

In the domestic market, the modern Metabo miter saw is represented by productive and reliable professional-class models. The operational characteristics of the manufactured assortment determine its application in a wide range of construction, repair and production technologies.

Depending on the cost and level of equipment, the produced saw-and-cut products are completed with:

• broaching systems and cutting depth limiters;
• laser markers;
• retractable stops and other equipment.

Metabo KGSV 72 Xact SYM

Distinctive properties of one of the latest proprietary brand developments. the ability to quickly adjust the parameters of the angular cut. To do this, it is enough, without additional calculations, to transfer the data from the bevel to the system of stops and clamps.

Indicators of the maximum depth and width of the cut are within 42-72 mm, respectively. 215 and 305 mm. The design of a miter saw with a power of 1800 watts provides for:

• installation of a soft start system and a speed controller;
• two-line laser;
• LED illumination of the cutting area;
• use of an adapter for connecting a vacuum cleaner.

Metabo KGS 254 I Plus

The design of the KGS 254 I Plus series miter saw includes:

• operational advantages of 1800 watt asynchronous drive with elastic V-belt drive;
• high performance 254 mm saw blade;
• new developments in terms of ergonomics and industrial design;
• function of moving the table in the horizontal plane.

The working characteristics of the tool provide the ability to adjust the cutting depth to 54 and 90 mm, the standard width is 214 and 305 mm. The model weighing 32.5 kg is equipped with a laser marker, strong stops for secure attachment of the processed materials.

The saw of the KGS 254 I Plus series is one of the few models equipped with a dust extraction system with a two-point intake device.