Non Lubricated Chainsaw Partner Chain

Non Lubricated Chainsaw Partner Chain

In a rural compound in the country, an inexpensive and trouble-free chainsaw Partner 350 replaced a two-handed tool and a hacksaw. Initially, the Swedish brand transferred the rights to the brand of Electrolux with a production site. Therefore, with proper quality, the tool is inexpensive. For amateur use, the model is as convenient as possible. The price of the Partner 350 chainsaw is from 5 to 9 thousand rubles, depending on the configuration, is acceptable.

Chainsaw selection principles

So, the question arose of which saw to choose for work in a summer cottage. Of course, this should be a chainsaw, as it is mobile, does not depend on the energy source. Such a device can be used on a tourist trip, to collect wood residues in the forest.

Quality products, not only saws, are identified by well-known brands. But here there is a danger of falling into a replica created in artisanal conditions. Therefore, the product should take a closer look. Often fake expensive tools of world leaders Stihl, Husqvarna, Echo, Solo, as expensive brands. Therefore, the Partner 350 chainsaw from the manufacturer can be purchased with less risk.

The ratio of weight. Power is directly dependent. Therefore, a professional tool for cottage use is not always suitable. Choosing a home assistant should be with a small margin of power. A tire size of 45 cm on an amateur saw is a marketing move, it reduces engine life, the saw device will stretch with jamming.

A chainsaw is a tool of increased danger. When working, it is necessary to ensure inaccessibility to the place of work of children and animals. Cutting small boards is best done on specially equipped racks. For your own safety, wear fastened clothing, glasses, and protective gloves. Comfortable, stable shoes should be on your feet.

Options for damping vibration, easy start-up, convenient chain tension, and the availability of an air filter create additional convenience when working with the tool. Of household budget saws in the ranking of the most popular in fifth place, the Partner 350 S is called a chainsaw. And in terms of price. Quality, this is the best mechanism.

Technical characteristics of the Partner 350 chainsaw

Partner 350 is considered the most common saw from the Partner series. This model is used for longitudinal and transverse sawing of wood. The tool is designed for a bus length of 40 cm. Of the options, the device is equipped with:

  • Inertial chain brake and built-in switch;
  • Electronic ignition;
  • Spring for easy engine start;
  • Vibration damper;
  • Automatic chain lubrication.

Main parameters:

  • Power. 1, 5 kW;
  • Angular shaft speed. 13000 rpm;
  • The working volume of the combustion chamber is 40 cubic meters. Cm;
  • Tire length. 40 cm;
  • Chain pitch. 3/8 inch;
  • Total weight. 4.7 kg.

Practical tips for operating the Partner 350 chainsaw are presented in the:

After proper break-in, regulation, the operating mode of the saw allows you to perform a wide range of work, including longitudinal cutting of wood.

The study of the operating instructions of the chainsaw Partner 350

Work on complex household appliances without studying the device and operating rules is unacceptable. Instructions from the manufacturer in the Russian translation include topics:

  • List of components and parts;
  • Information on how to read characters on equipment;
  • Safety measures during the work with a saw and observance of technology of sawing operations;
  • Instrument assembly sequence instructions;
  • The correct composition of fuel mixtures and lubrication requirements for chains;
  • Maintenance instructions for individual components;
  • Table of problems and their solutions;
  • Partner chainsaw specifications.

Official documents designed to help owners of equipment carry comprehensive information on the proper operation of the saw.

Only use a low rebound saw chain on the tool. Due to the limiters of the depth of cut, it is safer in amateur use.

Partner Chainsaw Repair Terms

For the owner of the tool, having the skills of repairing household appliances, to fix the malfunction on their own, after the end of warranty service, is available. First you need to learn the technique. Experienced craftsmen believe that DIY partner 350 chainsaw repair starts with the correct diagnosis. To determine the nature of the repair, you must:

  • Check the ignition system;
  • Carburetor diagnostics
  • Fuel system performance;
  • Clean the muffler;
  • Determine the performance of the piston system;
  • Check chain lubrication;
  • Determine the wear of the components and the required spare parts for the chainsaw Partner.

Complex issues need to be addressed with the assistance of specialists for consultation.

In case of refusal to start the engine, first of all, check whether the candles are working. They must be dry and have a contact gap of mm. By the condition of the twisted out candle, it is possible to determine the signs of malfunctions in the fuel system and equipment operation.

Check the health of the candles by connecting through the cap with the starter, and put on the cylinder body. A candle is serviceable if it gives a spark to the body when the starter is pulled. If there is no spark, this is a faulty wire or the candle is flooded, or it has exhausted its life.

A lot of working saws may cause carburetor malfunctions. But first, you need to adjust the carburetor of the Partner 350 chainsaw, as shown in the:

Carburetor repairs can temporarily extend the life of the engine. Running holes in the carburetor may become clogged with poor-quality fuel or through a loose air filter. When disassembling the unit, it is necessary to rinse and blow out all the parts.

Repair and adjustment of the carburetor, as the most critical unit, it is better to entrust the master.

If no fuel enters the cylinder:

  1. You can clean the fuel filter after making sure that the fuel consumption is low from the hose. Depending on the degree of clogging, it must be cleaned or replaced with a new one.
  2. If the injection is blocked, remove the hose, clean the hole with a needle.
  3. Little air enters the carburetor through a clogged air filter. Disrupted flow of the mixture into the engine.
  4. Incorrect carburetor adjustment will lead to the same result.

The chain is not lubricated. To avoid overheating of the chain and its pulling out, the lubricant at the working unit should come automatically. But since the oil is fed through the channels, they can become clogged with fine wood dust. After each cycle of work, the canvas and gaps must be cleaned of dust and dirt. If oil leaks, check the integrity of the hose and the tightness of the connection to the tank. Replace defective hose or temporarily cover hole with sealant. Repair the oil pump.

Partner 350 chainsaw malfunctions include failure of durable parts. If the sprocket, tire, rubber anti-vibration seal has worn out or the chain has become dull, measures must be taken in time. In harsh operating conditions, they must be controlled, replaced, sharpened, tightened on time.