Rake Treadmill for Motoblock DIY

Nozzle for Motoblock “Neva

A feature of this manufacturer is that a special adapter is provided here, which makes this attachment suitable for any walk-behind tractor. This is very convenient, since users of other equipment, and not only. it is possible to use high-quality rake.

Nozzle is regulated by width. Its working part is almost 1.5 m. This makes cleaning the site as quick and efficient as possible. At the same time, such a width makes it convenient to work both in large spaces and in small areas.

A feature of the rake for a single-axle tractor “Neva” is that they are made on a spring basis. As a result of this approach, they are not in the same position, but somewhat change their amplitude during movement. This allows you to better collect garbage, hay, leaves, etc.d. over, such nozzles are not afraid of stones, so their teeth will not break off. They can be lowered and raised using a special lever.

Do-it-yourself rake for a walk-behind tractor

If you don’t want to buy attachments, homemade rakes will fit the walk-behind tractor. To create a simple option does not require a lot of effort, the main thing is to prepare drawings of possible options. It is enough to have strong steel in stock and skills in working with a welding machine to make ordinary fan rakes for a single-axle tractor with your own hands. This option is well suited for harvesting hay and foliage.

What tools and materials will be required for manufacturing:

  • thick-walled steel pipe with a circular section of 30 mm for the manufacture of the axis, and a diameter of 20 mm for the handle;
  • profile pipe (20-25 mm) for the manufacture of the frame;
  • steel corner;
  • two wheels with a diameter of 30-50 cm;
  • steel rods with a cross section diameter of 8-12 mm;
  • wire;
  • steel sheet;
  • drill and drill for metal;
  • angle grinder;
  • welding machine;
  • bolts and nuts M8.

Before proceeding directly to the creation of a rake, you should study the drawings and dimensions, video tips from experienced craftsmen and photographs of finished home-made designs for a walk-behind tractor. The manufacturing process consists of the following steps:

  • You need to start by determining the length of the axle that will be attached to the wheel hubs. Beforehand, it is necessary to create attachment points on the axis. To do this, metal plates must be securely welded to it, located at a distance of 10 cm from the wheels.
  • Cut with the help of an angular grinder 2-6 squares from the steel sheet, weld the resulting plates (oblique supports) to the axis strictly parallel to each other relative to each other.
  • Determine the middle between the supports where the drawbar will be welded. It is made from the same pipe as the axis. Make a handle from a thin pipe, which can be slightly bent for ease of use.
  • To two racks from one end to trust perpendicular to the cut pipe, which will be a little more axial in diameter. An axle is inserted into the received fasteners, which should rotate freely in them.
  • Install the axis, weld a working grip to it. a steel corner 1.5-1.7 m long. Take a pipe with a circular section of 20mm, and weld a rod to its upper end. From the other end, the pipe will “sit” on the eccentric, reaching the center of the drawbar. This mechanism will be required to adjust the angle of inclination Rabel.
  • To the working bar, weld or fix in pre-drilled holes “mustache” made of rod and curved in a semicircle.
  • Weak areas of the structure can be strengthened by welding and metal plates.
  • At the end, it is advisable to paint the resulting tool to prevent corrosion, and before running in, lubricate the moving parts with grease.

Alternatively, you can not cook a new rake, but use an old pitchfork. They are welded to the pipe in an even row, and then attached to a single-axle tractor. It turns out very convenient and effective rake. Most often, such equipment is built from 5-7 pitchforks.

Thus, for an hour of work, you can save up to 20,000. This is how much good attachments in the store will cost. it is not worth buying a rake, as their quality is likely to be far from ideal, so the equipment will often have to be repaired and changed.

Homemade rake

If you have the appropriate tools and materials, there should be no problems with their manufacture. The main thing is to choose or to correctly draw up a drawing of the future device, taking into account all the requirements for it.

One of the budget options for making a rake for a walk-behind tractor is to use old forks, which should simply be welded to a base that is suitable in size. Often, to make such equipment with your own hands, you need to pick up an iron pipe of the appropriate length and diameter, as well as from 5 to 10 garden pitchforks.

The only problem in the manufacturing process will be the attachment point, since in addition to its strength and rigidity, it must additionally have sufficient mobility.

Hay baler

For the selection of hay for the purpose of subsequent compaction, rotary-belt mechanisms with presses and rolls are used. It is difficult to make such a rake for a walk-behind tractor on your own. The drawings on them are complex, with a large number of bearings and interconnected nodes.

rake, motoblock

It takes a lot of effort to create tight bales or to wrap dry, compacted grass into ribbons. This is mainly done in large farms using a tractor. Attachments in the form of a belt rake and a compactor for a walk-behind tractor are commercially available. The teeth are fixed in rows across the belt, which rotates on the rotors. The grip movement is from bottom to top. Then the hay is moved along the belt into the bunker. The degree of pressing is small, but loading and storage are simplified.

Conveyor rake picks up a narrow strip of grass, within a meter. This is limited by the design capability and belt width. Can be used for tedding without storage. The disadvantage is low productivity and design complexity.

What are the benefits

Both the rotary and wheel rakes of the tractor tedder rake the mowed vegetation into windrows, which makes it easier for the baler to bale later. With their help, they turn over the layers of hay, substituting for drying under the sun’s rays and blowing the wind on the right side of the roll, and thereby speeding up the drying process of the mowing. Tractor rotary models have good speed and are the best tool for working with crops that require careful handling (for example, alfalfa). Also, a tractor with this type of tedder can easily cope with wet or heavy hay.

Wheeled tractor tedder rakes are characterized by the highest productivity and excellent performance at higher speeds. Their effectiveness is maximum at a straight long distance, but worsens in the corners of the cultivated area. They are easily attached to the tractor without the need to connect the power take-off shaft for operation.

The fingers on the wheels of such a tedder not only turn over the mowed vegetation, but fluff it up, thereby increasing ventilation in the hay swaths. A tractor with a similar attachment handles the field with the least loss of mowed foliage when harvesting forage hay. In addition, such a sun-type design for a small tractor or walk-behind tractor can be made by hand.

Instructions for rakes-tedders wheel-finger “FEEDER

The efficiency of this equipment is determined by specific quality standards, such as the cleanliness of hay collection and swath size. When collecting hay from swaths, the rake should not break off and lose inflorescences, leaves or stems of plants: the allowable loss of grass mass can be no more than 2%. The formation of each swath should be carried out in the same size, without breaks, and the stems of the plants should not be mixed up.

Both the rotary and wheel rakes of the tractor tedder rake the mowed vegetation into windrows, which makes it easier for the baler to bale later. With their help, they turn over the layers of hay, substituting for drying under the sun’s rays and blowing the wind on the right side of the roll, and thereby speeding up the drying process of the mowing. Tractor rotary models have good speed and are the best tool for working with crops that require careful handling (for example, alfalfa). Also, a tractor with this type of tedder can easily cope with wet or heavy hay.

Wheeled tractor tedder rakes are characterized by the highest productivity and excellent performance at higher speeds. Their effectiveness is maximum at a straight long distance, but worsens in the corners of the cultivated area. They are easily attached to the tractor without the need to connect the power take-off shaft for operation.

The fingers on the wheels of such a tedder not only turn over the mowed vegetation, but fluff it up, thereby increasing ventilation in the hay swaths. A tractor with a similar attachment handles the field with the least loss of mowed foliage when harvesting forage hay. In addition, such a sun-type design for a small tractor or walk-behind tractor can be made by hand.

About a rake for a walk-behind tractor: homemade tedders and transverse hay rakes

Now we will look at how the rake for the motoblock is done with their own hands. It should be noted that these will be universal rakes that are suitable both for Neva walk-behind tractors and for equipment of other brands.

How to make a rake for a single axle tractor

The horse rake became the prototype of our device. people have used it for centuries, and even today in the villages in the Russian outback you can find horse rakes.

First of all, we build the base. we put the wheels on the axle. We weld two platforms onto it to strengthen the fastening of the rake mechanism. Two thick steel strips are suitable as platforms. We strengthen them at a distance of 10-12 cm from each wheel. Then we fix the drawbar in the center of the wheel axis. it can be made from a thick-walled pipe. A loop is welded at the end of the drawbar. with its help, the rake is docked with the walk-behind tractor. We made the base.

The next step is to make the working mechanism itself. We weld racks onto the wheel axle, on which we attach two pieces of pipe by welding. a section of 40 mm. Insert the rake axle into the pipe, which should turn freely. We make retaining rings on both sides of the tubes for fastening to prevent the rake from shifting to the sides. After these operations, we supply the rake with a lever. It will serve to raise and lower the teeth.

75 Treadmill Transformed into a 2×72 Belt Grinder

We attach the teeth themselves to the axis of the rake, a six-millimeter wire is suitable for their manufacture. From it we bend C-shaped elements of the desired size. Their fastening can be ensured by welding or installation in pre-drilled holes.

Working on the drawbar and racks

We mount oblique supports. We take several metal squares and weld them on the axis strictly parallel

Installing the drawbar. A thick-walled pipe is installed in the center between the supports. we select its size at will.

Create a hook. To do this, we bend the pipe.

Installing the rake bar

axle mount. 1.5 m is cut off from the pipe and a working grip is made. The axle is then placed horizontally against the uprights. The result is a pipe that scrolls freely at the attachment point.

An eyelet is being made. We weld a rod to the upper corner of the pipe, install the lower one with an eccentric. it should reach the center of the drawbar. By pressing the pipe, the rake can be raised or lowered.

At the end of the rake, grease with grease for proper operation. After watching the video, you will get acquainted with detailed recommendations. how to create a rake for work on the site.

Characteristics of attachments for walk-behind tractor

A similar device is included in the category of attachments. On a single-axle tractor, a rake is attached using an adapter. This is convenient, as it allows you to use various equipment on one walk-behind tractor. Very often, one or more types of rakes are already included in the kit. However, there is also such a technique where the equipment does not include any attachments. These options are cheaper. But keep in mind that you will either have to buy add-ons or do it yourself using pre-prepared drawings.

Most walk-behind tractors have the ability to raise or lower the rake with a handle. This is convenient and allows you to better carry out work and clean the device.

Regardless of whether it will be a homemade rake for a walk-behind tractor or purchased, they must be durable. Most often, manufacturers make such equipment from high-quality steel. It should have excellent anti-corrosion properties, as the rakes will often contact with water. This option will last a long time. Steel nozzles do not bend or rust, so they can be used for more than 10 years. The service life of the device largely depends on the storage location. Any attachments must be kept in a dry area. After use, the rake must be rinsed and dried.

Articles ,