Reciprocating Saw For What is Used

  • What is a reciprocating saw
  • Why do I need a reciprocating saw
  • Specifications
  • Tool Tips
  • Reciprocating saw rating for home and garden
  • Rating of powerful electric saws

Reciprocating saw is intended not only for professional craftsmen, but also for those who are far from this area. Thanks to this tool, you can quickly, and most importantly, efficiently perform almost any work associated with cutting material. In this topic, we will touch on the features of reciprocating saws and tell in detail about the specifics of choosing this device.

What is a reciprocating saw

Reciprocating saw is a multifunctional equipment, which in appearance resembles a drill. It has an elongated body with a handle and a working trigger located at the level of the index finger. To provide protection when using the tool, fuses are located on it that protect against accidental pressing of a button. Also, the device is equipped with a special cutting blade that moves rectilinearly, capable of pendulum-like actions (on some models). By the principle of action and by the tasks assigned, as will be discussed below, a saber saw can be compared with a hacksaw familiar to the average user.

Reciprocating Saw For What is Used

The mass of the reciprocating saw varies within 2.5 kg. In a sense, weight determines the power and scope of the equipment. Manufacturers produce a large number of files, the length of which varies from 8 to 35 cm. This range allows you to work with materials of different thicknesses.

Electronic saws can be divided into:

  • Professional
  • Amateur
  • Household

In the West, almost every owner of a house or cottage uses such a tool. , despite the great capabilities of the reciprocating saw, units have it. This is due to the fact that many residents of the country believe that the use of an electric tool is always fraught with danger, and only a specially trained person can use it. Few people know, but such a terrible name hides an ordinary tool that provides comfortable work and does not pose a danger to its owner.

Why do I need a reciprocating saw

A distinctive feature of the equipment is that its operation does not require fixing the material. The tool can work without support and in any position. It is worth noting that few professional tools have such functionality. True, to cut a material without fixing it is much harder due to strong vibrations.

The equipment in question helps not only to accurately, but also to cut a large amount of materials in a short time. If you compare the tool with a hand hacksaw, the latter loses a lot. This relates to the fact that a reciprocating saw can cut along a straight and curved path, which significantly expands its scope of use, answering the question. What is a reciprocating saw for. Naturally, to make curly cuts, experience is required, however, this can be quickly learned.

Specifications

The market has a large assortment of reciprocating saws, which can be determined by a small set of numerical values ​​called technical specifications.

Power. The main indicator is not only a reciprocating saw, but also any equipment with an electric motor. The higher it is, the faster the material will be cut. However, as the power grows, the mass of the tool will also increase, which is not always convenient for the user holding it constantly in his hands. Also, the power value affects the cost of the device. A side factor in power growth is vibration.

Before you get the most powerful reciprocating saw, you should weigh all its advantages and disadvantages. For domestic needs, a tool up to 1200 watts is quite suitable. It is able to penetrate into metal and wood at an average depth of 13 cm and 30 cm, respectively.

Depth drank. In fact, this is the same indicator of power, but more understandable for the average user. This technical characteristic determines the maximum thickness of the workpiece that the tool can handle without getting stuck or causing overheating. Some owners put a rather long cloth on low-power electric saws, however, this can cause damage to the device. The average depth of cut of the tree is 18 cm.

Saw Speed. If you plan to cut a material with high hardness, such as stone, high speed is required. While for cutting trees, productivity depends only on power. Before deciding on this parameter, it is recommended to think in which area the tool will be used. This is due to the fact that the great capabilities of the reciprocating saw allow you to cut any material. It is optimal to purchase equipment with a speed controller.

Weight. If the equipment is supposed to be used in conditions when it is impossible to grab it with two hands, for example, when pruning vegetation in the garden, a large mass of the tool will significantly complicate the work. The priority of this value depends on the expected conditions of use of the tool.

Pendulum move. The principle of operation is similar to the operation of an electric jigsaw, when in addition to reciprocating movements, the canvas also vibrates. This allows you to increase the productivity of the equipment and increase the service life of the file. On models with the implemented function, there is a regulator with which you can determine the amplitude of movement. The harder the material they work with, the smaller the pitch. If we talk about such solid materials as stone, it is recommended to turn off the considered function. Also, turning it off is mandatory when curly cutting.

Reciprocating Saw For What is Used

Keyless fastening of a file. This is the tool’s functionality, designed to greatly facilitate the user’s work, since it shows whether it is possible to quickly change the cutting blade without the use of additional tools, such as a screwdriver.

Reciprocating saw models have a soft start function. This does not affect the work, however, with its help you can significantly increase the safety of equipment and its life. In the first case, when starting work, there will be no sharp jerks that can tear the tool out of hands. This parameter also increases the cost of the tool, so you should think about whether such a function is needed or not.

The last thing to say about the characteristics of the tool is the presence or absence of a support shoe. This is a device on which you can lean the saber saw if necessary. Often this function is used for curly cutting. In some cases, the support shoe is fixed at right angles, and in some cases it deviates significantly. In fact, this feature expands the capabilities of the tool.

Tool Tips

Before choosing a model, the user must clearly decide why and in which situations the tool will be used. If the equipment will be used rarely and only for household needs, you can purchase an inexpensive model. However, it is worth saying here that a low-power saw needs a pause in work every 20 minutes of continuous operation. A professional tool has high power and many useful functions, but its cost is quite high.

When choosing a saw, the main thing that you should pay attention to is the power indicator. For household needs in a house or apartment, a tool with a power of 600 watts is quite suitable. As mentioned earlier, the higher this figure, the greater the weight, therefore, the purchase of equipment with increased power (from 1000 watts) is advisable mainly for construction. The choice of a reciprocating saw depends in part on the material being cut. If cutting will be carried out not only metal, but also wood, it is necessary to take a model with adjustable working stroke of the cutting blade. To reduce the load on the hands, preference should be given to a tool with rubber pads.

The parameter that is important when operating an electric tool is its safety. It is achieved if the equipment has the following nuances:

  • Double electrical insulation
  • Soft start equipment
  • Vibration isolation
  • Instant tool stop
  • Random Start Limit

Ideally, if the acquired model contains all the functions listed above, however, the cost of such an instrument may not justify itself in the future.It is worth saying a few words about the nuances of choosing a model depending on the needs of the user:

  • The basic model, designed to solve everyday problems in the apartment, will cost from 3,000 to 5,000 rubles.
  • A saw of average power, which should be chosen by those with a private household with a large amount of vegetation, will have a cost of 5,000 to 8,000 rubles.
  • A powerful professional tool is more suitable for those who are going to use it in construction and demolition works. In this case, the price tag varies from 8,000 rubles.
  • If you need powerful professional equipment, the capabilities of which include cutting bricks or making a doorway in any wall, except for cast concrete, the choice should be made in favor of an alligator saw. However, its cost is significantly higher than that of the models mentioned above. From 25,000 rubles.

Thus, there are a large number of models of electric tools that differ in power and functionality. To select a specific tool, it is necessary to determine how often and under what conditions the equipment will be operated.

Reciprocating saw rating for home and garden

Anchor SPE-710 / 115E

Specifications
Power: 710 WTurnovers: up to 2800 per minuteWeb travel: 20 mmMaximum thickness of metal / wood cut: 20/115 mmWeight: 2.5 kg

Quick-mount: yesSpeed ​​adjustment: noPendulum move: noSoft start: yes

Average price: 3000 r.

Special BPS-800

Specifications
Power: 800 WTurnovers: up to 2500 per minuteWeb travel: 21 mmMaximum thickness of metal / wood cut: 8/65 mmWeight: 3.15 kg

Quick-mount: yesSpeed ​​adjustment: yesPendulum move: noSoft start: yes

Average price: 3800 p.

Patriot RS 808

Specifications
Power: 850 WTurnovers: up to 2800 per minuteWeb travel: 28 mmMaximum thickness of metal / wood cut: 6/105 mmWeight: 2.7 kg

Quick-mount: yesSpeed ​​adjustment: yesPendulum move: noSoft start: noBacklight: yes

Average price: 4000 p.

One of the models designed for curly cutting. There is a speed controller with 6 modes of operation. The tool handle is rubberized.

Graphite 58G960

Specifications
Power: 350 WTurnovers: up to 2500 per minuteWeb travel: 17 mmMaximum thickness of metal / wood cut: 6/60 mmWeight: 1.6 kg

Quick-mount: yesSpeed ​​adjustment: yesPendulum move: noSoft start: noBacklight: no

Average price: 4700 p.

The equipment is intended for craftsmen to carry out small repairs. Able to cut wood, plastic and metal. The tool body is made of aluminum alloy.

Einhell TH (TC).Ap 650 E

Specifications
Power: 650 WTurnovers: up to 3000 per minuteWeb travel: 20 mmMaximum thickness of metal / wood cut: 10/150 mmWeight: 2.8 kg

Quick-mount: yesSpeed ​​adjustment: yesPendulum move: yes (permanent)Soft start: yesBacklight: no

Average price: 4800 p.

The saber saw for the garden is most of all intended, since it allows you to quickly and efficiently cut trees. Among the advantages, it is worth emphasizing the quick change of the cutting blade, the handle with soft pads and the robust housing design, which will protect the tool from mechanical damage.

Rating of powerful electric saws

Einhell TE-AP 1050 E

Specifications
Power: 1050 WTurnovers: up to 2700 per minuteWeb travel: 29 mmMaximum thickness of metal / wood cut: 20/200 mmWeight: 3.75 kg

Quick-mount: yesSpeed ​​adjustment: yesPendulum move: yesSoft start: yesBacklight: no

Average price: 8100 r.

The model is designed for high-speed cutting and accurate cutting of brittle materials. It has a power regulator, as well as ventilation holes that cool the engine.

Makita JR3050T

Specifications
Power: 1010 WTurnovers: up to 2800 per minuteWeb travel: 28 mmThe maximum thickness of the cut pipe / wood: 130/255 mmWeight: 3.2 kg

Quick-mount: yesSpeed ​​adjustment: yesPendulum move: noSoft start: noBacklight: no

Average price: 9000 p.

This is a reliable reciprocating saw,s and photos of which show that this tool is capable of sawing a metal pipe. Manufacturers complete the model with a system for quick change of a cutting blade and a cable for operation from a power supply network of 4 meters in length.

Aeg US 1300 XE

Specifications
Power: 1300 WTurnovers: up to 2800 per minuteWeb travel: 30 mmMaximum thickness of metal / wood cut: 20/250 mmWeight: 3.8 kg

Quick-mount: yesSpeed ​​adjustment: yesPendulum move: noSoft start: noBacklight: no

Average price: 10500 p.

A review of the reciprocating saws shows that this tool is designed for sawing blanks from plastic, metal, wood and other materials. For the convenience of the user on the model there are rubber pads.

Hitachi CR13V2

Specifications
Power: 1010 WTurnovers: up to 2800 per minuteWeb travel: 29 mmMaximum thickness of metal / wood cut: 19/300 mmWeight: 3.2 kg

Quick-mount: yesSpeed ​​adjustment: yesPendulum move: noSoft start: noBacklight: no

Average price: 12000 r.

The most popular area of ​​application is repair work on dismantling old pipes. However, it is often used on other materials. The maximum file length can be 43.5 cm, which allows you to work with large workpieces.

Makita JR 3060 T

Specifications
Power: 1250 WTurnovers: up to 2800 per minuteWeb travel: 32 mmThe maximum thickness of the cut pipe / wood: 130/255 mmWeight: 4.2 kg

Quick-mount: yesSpeed ​​adjustment: yesPendulum move: yesSoft start: noBacklight: no

Average price: 13500 p.

Reliable tool with shockproof housing and high resistance to intense loads. The main scope is construction work. For domestic needs, acquiring this model is irrational.

Source
Electric Saws ,