Refueling a semi -automatic coil of a trimmer for Patriot grass. How to wind a fishing line for a trimmer on…

Installation of fishing line on a trimmer for Patriot grass

Trimmer for grass is the most common unit used to cut grass and cut small shrubs. This device is distinguished by its simplicity in maintenance, simple management during operation, and even women cope with it even a small weight.

It is no secret that for the high.quality performance of herbal mowing work, the correct selection of a cutting tool is required. As the latter in trimmers, special cutting nozzles (wheels, knives) or trimmer heads with fishing line inside are used.

Nozzles and a fishing line for a trimmer are a consumable tool, but if the knives can be sharpened, then when spending the fishing line you need to replace it. In this article, we will tell you in the most detail how to correctly replace the fishing line for the trimmer.

Coil with one working antenna

The simplest version and simple sequence of actions:

• Bobbin dimensions and the length of the factory factory winding determine the recommended length for winding the braid fishing line. 2 5 m.
• One end of the spit line is inserted into the fastener technological hole inside the bobbin.
• The fishing line for the trimmer is wound on the drum during the reverse rotation of the bobin in the direction of the trimmer product for the grass. as a rule, on the inside of the bobin, the arrow indicates which side is wound.
• A small part of the spit line remains free so that it can be pulled out. it is fixed in a special groove on the inside of the coil designed to hold the winding when the coil is collected in working condition.
• The left end of the mowing fishing line passes through the hole of the outer part of the coil.
• Half of the coils are collected and installed on the bar of the trimmer device for grass.

We carry out the winding of the fishing line

Sentlessly completed disassembly of a spray coil without losing its spare parts allows you to go to the main task-winding into a fishing line coil. Adjustment of a trimmer carburetor for STIHL grass. Technological features of the design of the spool and the number of working antennae determine the sequence of actions.

Winding process

If your coil is designed to work with only one osmus, then everything is simple here. It is necessary to rewind 2-4 m of fishing line (depending on the size of the coil), find the hole for the trimmer on the inside of the coil, insert one end of the fishing line there and start to wind the fishing line for the trimmer in the direction in the reverse direction of rotation of the coil at the trimmer. The inside of the coil is usually indicated with an arrow in which the side is to wind a fishing line for a trimmer. Having wiped a fishing line for a trimmer, we leave its small piece unnecessary to put it out. We fix this piece in a special groove located on the inner part of the coil and designed so that at the time of collecting the coil of the fishing line for a trimmer does not unwind. If there is no such groove, then you will have to hold a fishing line for a trimmer with a finger, so as not to let it unwind during the further collection of the coil. Next, we take the outer part of the coil and spread the outer piece of fishing line into the available hole, collect and put the coil back to the trimmer for the grass.

If the coil is designed to work with two antennae, then we do the following. On the inside of the coil, we look at how many grooves are available for winding fishing. There may be one or two of them. If the groove is one, then both antennae are wound on this one groove. If there are two grooves, then each antennae is wound in a groove. The coil with one groove should have a through hole in which a fishing line for a trimmer is threaded. We open 2-4 m of fishing line, we extend it through this hole so that on each side of the fishing line it sticks the same. And we will simultaneously wrap both the antennae of the fishing line in one direction, the reverse direction of rotation of the coil in the trimmer and coinciding with the direction indicated by the arrow available on the inner part of the coil. We leave a little fishing fishing line, we fix the resulting ends in special grooves, and if they are not, we hold with your fingers. We spread both ends into the available holes on the outer body of the coil. Collect the coil and fasten it to the trimmer.

In the presence of two grooves, a piece of fishing line 2-4 m long is folded in half, we insert the loop in the groove between two grooves at the bending site, and we wind both the ends of the fishing line each in its groove at the same time. Further actions are similar to the previous option.

There are also coils, in which a fishing line for a trimmer is threaded through a through hole on the inside. After that, the ends of the fishing line, without wrapping, spread completely through the holes on the outer body of the coil, collect the coil and begin to rotate the button that is usually pressed in order to release the fishing line for the trimmer while it is worn out. Rotate the button. inside the trimmer fishing line is wound itself. At the same time, it will not work to twist it in the “wrong” direction, since it can spin only in one direction. If you get used to it, then you can wrap a fishing line for a trimmer to such a reel without even taking it out. you just need to combine the through hole of the internal drum with holes on the outer body of the coil, and then pass the fishing line for the trimmer in them.

That’s all on this issue. Successful winding!

Remove the coil from a trimmer for grass

On small electric trimmers with the lower engine location (when it is located at the ground) at the coil, usually there are two keys on the sides. Click on them and disconnect one half of the coil body from the second, which remains on the trimmer. Together with the first half, the inner part is also taken out, on which the fishing line for the trimmer is directly wound. When analyzing, be careful: there is a spring inside that can fly out and get lost.

On electric and gasoline trimmers with a bent bar (on such trimmers there is no way to put a knife yet) you need to grab the coil body itself with one hand, and with the second hand you need to start turning counterclockwise the lamb available on it. It is he who attaches the coil to the bar trimmer for the grass. Having unscrewed the lambs, carefully remove the whole coil, trying not to lose the spring available inside.

On electric and gasoline trimmers with a straight bar and a gearbox at its end (on such trimmers for grass, in addition to the fishing line, you can also install a knife) look for a hole under the coil, insert, for example, a screwdriver, we quietly rotate the coil until the screwdriver crawls deeper deeper. and the coil will be fixed. Now we twist the whole coil clockwise (since the thread is left) and remove it from the trimmer for the grass. Then we disassemble the coil. It can be collected using latches or twisted with a lamb. If the coil is on the latches, then we press on the sides on the base of the latches so that they bent and free one half of the coil body from the other. We just twist the lamb. There may also be a third type of connection of two halves of such a coil: with it you need to grab the lower part with one hand, and the top is the upper one, and start turning them in opposite directions. Disasseminating such a coil, you must also follow so that the spring available inside is not lost.

Trimmer coil for grass with one osmus

Many owners and experts note the simplicity of the operation and refueling of bobin with one mustache. Depending on the manufacturer, the length of the refueling fishing line can range from 2 to 5 meters. The end of the fishing line is inserted into the head in a special technological groove or hole, and the winding is carried out in the reverse work rotation of the bobbin side. On most coils on the outer side of the case there are marks in the form of arrows, which indicate the direction of the movement of the bobbin of the trimmer for the grass.

After winding, you need to leave the free end of 15-30 cm to strengthen the centrifugal force, which is determining when extracting a trimmer fishing line in automatic and semi–automatic reels. The left end is extended through the coil work hole and make the head assembly.

Tools

Features of a trimmer for grass Patriot Pt 3055

• In the production of the device, modern materials and assembly technologies were used.
• The latest anti.vibration system is provided.
• High performance is achieved due to the chrome engine with wear.resistant and clearly adjusted details.

• Simple and mobile control system. On the bicycle shape in the reach of the launch button and gas clamp, which allows you to carry out work with accurate calculation and mobile control.
• For lubrication of drives, a line of unique motor oils was developed.
• The simplicity of the assembly and use of the tool is designed for an ordinary person without special technical knowledge and work experience.
• Safe operation. The protective casing protects the operator’s hands from injuries.

How to assemble a gasoline trimmer for grass Patriot Pt 3055

• The handle of the main bar is installed and fixed and fixed so that the open part is located on the right side of the handle.
• The handle is made by bolts not to the end, but taking into account the subsequent adjustment.
• The control handle is installed by a gas trim.

• The fastening screw is twisted with a slight effort. Cable clips on the handle are attached.
• The shoulder belt is snapped by a carbine for a special mount on the main rod of the unit.
• To the lower part of the bar, at the base, the iron casing is screwed onto the protective case of the gearbox, and a plastic casing is attached on top to enhance protection.
• A protective flange is installed on the slotted gearbox with the coincidence of technical grooves on the gearbox with flange.
• A fixing rod or hexagon is inserted between the gearbox and the flange.
• The trimmer head is twisted to the stop, against the course of the time of time.
• A cutting knife is installed on a protective flange.
• A knife is pressed with a puck and twisted with a nut to the stops against the course of the clock.

If the knife is swept on one side, then it is turned over and use the second sharpened side.

• Both parts of the rod are connected using a fixing lever of the fastener system.
• Checking the correct assembly: the impossibility of opening without pressing on fixing fasteners.
• The additional mounting of the coupling of the connection is tightened to the stop. This gives an advantage when using the unit to perform various works: the lower rod is installed on fixed angles of 90 and 180 degrees.

Description of a model of a gasoline trimmer for grass Patriot Pt 3055

• Due to the high.quality design of the two.stroke engine and its upper location in the design, a low noise level is released up to 70 dB.
• Fuel tank made of transparent, resistant to aggressive environments.
• Semi.automatic fishing line.
• The width of the strip capture with a knife up to 220 mm.
• Cutting the excess length of the fishing line is carried out with a special knife in a protective casing.
• Air filter is multi.stage, captures large, medium and small fractions of suspended dust and solid particles.
• The rod is detachable, convenient for transportation and storage.

Patriot fishing line for trimmer and coil: how to make them together

Almost like in a fable about a monkey and glasses, I tried to adjust a fishing line for a trimmer to a trimmer coil for grass. Rely on intuition, but lost. It was only necessary to read the instructions or take an Internet liner

If you find yourself on this page, you probably have a question: “How to wind a fishing line for a trimmer to a Patriot reel”. I’ll try to explain, relying on my kutz experience of the grass. I hope the story will help you avoid my mistakes and save your nerves. And the saved time will go to the mowing of high grass.

Work method

Two minutes spent on YouTube solved the problem. It turns out through the squeling a through hole passes. It goes along the diameter. The fishing line for the trimmer is passed through it and sticks further. Shpule should be in the middle of the fishing line. We align the lengths of both ends and make the same.

Below a few photos for explanation of the process.

Let us recall what the Patriotov trimmer for grass-head looks like. Orange case and gray lamb. After many thousands of revolutions, a round hard worker loses his front sight.

The same rogue rod sits inside. Also in orange color.

The task of finding a hole and put a fishing line for a trimmer into it.

The final step is the assembly: the rogue and the spring are placed in place, the fishing line for the trimmer into the feeding holes, the parts of the head of the head are reduced together and snap. The simplest one will remain. Twist the lamb. The direction of the winding is indicated by the arrow.

If you do not analyze the coil, you need to combine the arrow on the lamb with triangles on the orange case. Then the hole on the coil will be just along the gray arrow of the lamb, and along the edges it will be compatible with exits on the case. Then you can thread a fishing line for a trimmer. However, this option did not work for me. Trimmer fishing line stubbornly rested on something. Therefore, I made an option with analysis of the head described above.

The fishing line for the trimmer slowly went inside, leaving two short mustache.

I screwed the nozzle to the trimmer. I conquer the motor. Run to experience soon. Gas to the full and first passage. Trimmer fishing line on the spot. He drank a full tank. The thread did not fly away anymore.

How length to refuel a fishing line for a trimmer?

In the Patriotov coil, I had about 10 meters of a cord with a thickness of 3 mm. To decide more accurately, you need to wind a fishing line for a trimmer for the sides. The last time I bought tackle on ozone. I chose thickness 2.4 mm. I think she will refuel it more: twelve will definitely get out.

My attempts

But before I reveal the secret, a few words about how I tried to wind. There is no time to read? Then the answer to several paragraphs below. You can cross this mark

Once a factory fishing line for a trimmer ended in the middle of the site. I have to get a bit, so I’m going for a new sulfur. I will refuel. Along the way, I remember the seller’s words about how to crank this operation. We did not stop in detail at this moment. He said something about the difficulty of disassembly. I nodded my head and said “Yeah”. Eh, it was necessary to torment him and write it all.

First of all I remove the head from a trimmer for grass. The hexagon fix the shaft. I unscrewed clockwise. Left thread.

It is necessary to disassemble the head. But from what side to approach? I see two petals with the inscription push. I try to press. Do not give in. I am armed with a screwdriver with a thin wide slot. After 10-15 minutes, the nozzle appears to me in a disassembled form. You can exhale.

Patriotov trimmer head consists of four parts. One of them is a coil with two gutters. She’s a slope. On it and you have to wind a fishing line for a trimmer. The question is how to do it. By my inexperience, I made such a makar: I bend the fishing line for a trimmer in half and started winding from the loop, just putting it in one of the gutters. Then he withdrew it through the fixing slots in the side and collected the head.

It was important to choose the right direction of the winding. If I wound clockwise, then the fishing line for the trimmer immediately flown

If against the sentry, then for some time it was possible to shake. But in the process of working the fishing line for the trimmer was quickly expended. I understood that I was wrong with winding.

Review of fishing line for trimmer SIAT with ozone

I took an old echo replacement. Its thickness was 3mm. New Siatovskaya for 2.4 mm. The shape of the cross section is rectangular. Soft. Easily wound. It is convenient to mow. Of course, thick chips do not take, but it is quite coping with the middle grass.

I will run in the main steps that I walked to wind a fishing line for a trimmer to a Patriot reel. The main part naturally corresponds to the instructions. The only difference is that I disassembled the head.

• Remove the trimmer head
• Disassemble the head to parts to access the reel
• Determine how much fishing line is needed by wiping it to a reed coil
• Put the fishing line for the trimmer through the hole in the coil so that it shares in half
• Collect the head
• Win a fishing line for a trimmer by lamb clockwise
• The hand of the lamb rotate away from the triangles on the case

In the next note I will tell you what kind of oil I fill in my Patriot and how I cook the fuel mixture.

Control of the correctness of lubrication in the gearbox angular grinder

The last step during the maintenance of an angle grinding machine is to check the correctness of the application and distribution inside the gearbox of the lubricant. For this, after the gearbox is assembled, the power tool is included without load for several minutes, while there should be no extraneous sounds, smell and other things. If they occur, it is necessary to immediately turn off the angular grinder from the network. The heating of the gear unit is also checked. The lubricant should distribute heat evenly and the temperature of the gearbox should not be very high.

After short work, 4 screws are unscrewed, then remove the lid from the gearbox. Visually, the braid gears should be examined for their lubricants. If it is absent, then too small the amount of lubricant was laid and should be reported. If in the process of work it is squeezed out of the cracks, then it means it was laid much and excess should be removed. After making any changes, again check the operation of the corner grinder without load.

How to remove a coil from a trimmer for grass and extract a fishing line for a trimmer

Initially, before filling the fishing line for the trimmer to the coil of the trimmer for the grass, it is necessary to extract it from there. Coil or tip is a device that is located inside the braid, bobbin or drum. The heads are of different types (depending on the manufacturers), however, the principle of replacing the fishing line on the coil has the same. First of all, we will figure out how to remove the head from the tool, as well as how to get a drum with a fishing line from it.

It is interesting!The replacement of equipment can be done directly on the tool, but if you do it for the first time, it is still recommended to remove the head, and study the detailed process of winding. After the technology is mastered, you can perform work on replacement on a trimmer of a motorcycle or a gas station. Instructions on how to promote a hand head on a trimmer, has the following look:

• Turn the instrument with the head to the top, and if necessary, cleanse it from pollution. Take two fingers of one hand by the cover of the cover (on the mowing head), which are located symmetrically to each other. After a light pressed inward, dismantle the protective cover from the drum
• Next, from the rampart of the drum, the coil for the fishing line should be removed. It is planted on a shaft without fasteners, so it is dismantled with one hand
• The main part of the drum is fixed using a screw, which must be twisted with a screwdriver with an appropriate tip or a bat
• To twist it, it is necessary to hold the base of the drum with one hand, and the second to remove the screwdriver against the direction of the clockwise
• After that, you can proceed to dismantle. To do this, you do not need to pull it with all your strength, but slightly shaking it, slowly remove it from the hook with a metal shaft on which the drum is planted
• When installing the installation, the head should be planted in a tetrahedral slot

This process is not difficult, and as you know, it is not necessary to dismantle the entire head if you know how replacement is performed. When dismantling, consider the following nuances:

• It is recommended to remove the head periodically to prevent the corrosion of the threaded connection. If you never unscrew the screw, then if necessary to do it will be difficult and even sometimes impossible
• If the screw has a tetrahedral boring of the head, then for twisting you should select a screwdriver or bit of a suitable size to eliminate the licking of the faces on the head
• When assembling the installation, a threaded seat should be treated with lubricants, for example, solidol or machine oil
• If the edges on the screw are licked, then for its unscruptions you can use special clamping forceps
• There are drums that do not require preliminary disassembly. To dismantle them, you should take up it, and rotate in the opposite direction of the direction of the clockwise

Knowing how to disassemble the drum, you should continue to clarify the process of replacing a trimmer fishing line for grass. Below the video shows a detailed process how to open a trimmer coil for grass and disassemble it.

Types of fishing line

A thread for a trimmer for grass can be divided into views by its diameter. It can start with the smallest. 1.2 mm and reaches 4 mm. The most often used is the diameter of 2 mm. But you need to select it strictly personally, based on a certain model of the apparatus. Often the necessary diane of the product is indicated in the passport for the product. Usually the stronger the trimmer for the grass, the more the transverse of the fishing line should be. For example, the most perfectly is the most perfectly to wind the thread with a diane of 2.4 mm, and for a product with a weak engine, a thread dialect of 1.6 mm is suitable.

Fishing lines differ in the type of section. It can be round (for mowing ordinary grass), square (for soft and often mowed grass), with sharpened faces (for the highest grass), with notch (for narrow grass), also complex (see. A photo). The latter can be refueling far from not all types of devices. With all this, it should be noted that the fishing line for the trimmer is intended only for mowing the grass. In order to cope with other species of plants, you need to introduce motorcycles with a sharp knife. The length of the threads that can be tucked in a trimmer for grass can fluctuate from 10 to 100 meters.

Fishing line refueling in a trimmer for grass video

Having a very approximate idea of ​​how to tuck a fishing line for a trimmer to the coil of a trimmer for grass without the help of others, the new ones without hunting take up this matter. Huter grass ignition adjustment adjustment. But with some abilities, the development of this simple science does not represent any difficulties, and the similar annotation presented below will greatly facilitate this process.

Warranty production of the factory refueling of a trimmer for the grass will be in demand for fishing line substitutions.

Having a very approximate idea of ​​how to tuck a fishing line for a trimmer to the coil of a trimmer for grass without the help of others, the new ones without hunting take up this matter. Trimmer assembly scheme for Sturm grass.

But with some abilities, the development of this simple science does not represent any difficulties, and the similar annotation presented below will greatly facilitate this process.

Replacing the fishing line with a disk or knife

When ennobleing a personal plot, park zones and other places where various plants are required, it is often necessary to change the cutting tool in the trimmer.

This is dictated by the fact that the standard cord installed in a mowing head can only cope with herbs.

But when a shrub or young growth of trees appears on the path of an employee, a fishing line for a trimmer cannot cope with such a task, and it requires a change to a more effective cutting tool.

Manufacturers of trimmers provided such situations, and complemented their products with a mass of nozzles in the form of knives with several “petals” or in the form of disks similar to circular saws.

If you replace a fishing line for a trimmer with a knife with several “petals”, then such a tool can be mowed by both high grass and plants with thick and dry stems. And changing the fishing line for the trimmer to the disk, the user of motorcycles has the opportunity to cut shrubs or small trees.

Knives and discs are installed according to the following algorithm.

• The first thing you need to remove, stagnating the shaft, a mowing head (twist clockwise) or a nut with anthers if the unit has not yet been used.
• Set a saw or cutting knife so that they put on a small ledge (sleeve).
• On top of the knife, install the mounting cover and wind the nut on the shaft (counterclockwise).
• Tighten the nut (counterclockwise) using a tubular key.

For a better understanding of the process of changing the tool, you can watch this video.

Field winding algorithm

Depending on which model of the trimmer for grass is used, the type, thickness and length of the fishing line is selected. The diameter of the cord can be from 1.2 to 4 mm. It is not difficult to guess that the thicker you will refuel the cord, the more rigid and thick grass it is able to cut off.

In order to find out which line diameter can be used on your mower, there are 3 ways.

• View information about the thickness of the cord in the instructions for the apparatus.
• Look at the squash itself. It can be given information about possible fishing line diameters.
• Insert a fishing line for a trimmer into the output. If it passes into it without difficulty, then the cord of such a diameter can be used.

The fishing line for a trimmer is wound on a coil in a mowing head. Therefore, first it needs to be opened (this was mentioned above). There are 2 methods of winding the cord.

The thread sticks together

This nuisance occurs most often due to the use of poor-quality cord. When the apparatus is operating, the head of the trimmer for the grass heats up, and a poor.quality fishing line for a trimmer in it melts, gluing among themselves. Also, sintering of the threads occurs when a fishing line with a solid obstacle occurs.

In this case, there is a sharp braking of the cord, after which it drags it into the head, where it bothers. Some unit owners recommend lubricating the cord with mineral oil or spray on it with a silicone spray after winding on a spul. Others advise to wrap less threads on the coil.

But it is better to immediately buy a quality product, in the manufacture of which the manufacturer took into account the factor of overheating of the head, and the thread will not stick together.

Nuances of fishing line replacement in trimmer

When choosing a fishing line for a trimmer, you need to build on the type of engine. If the thread is too large, the resistance of rotation will increase, respectively, the motor will constantly overheat and soon will fail. Consider all the features of refueling the fishing line in the coil of the trimmer for the grass, the video instruction will help to correctly perform all the work.

Recommendations on how to change a fishing line for a trimmer on a trimmer operating from electricity

Before charging a fishing line for a trimmer to an electric trimmer for grass, you need to choose the right section of the thread:

• For a model with a motor power less than 500 W, a cord with a diameter of 1.3 mm or 1.6 mm is suitable;
• For a power of more than 1 kW, choose a consumable material with a section of 2 mm.

To figure out in more detail how to wrap a fishing line for a trimmer to a coil of an electric trimmer for grass, the following will help

Some tips on how to change a fishing line for a trimmer on a gasoline trimmer

Many users clarify how to correct the fishing line for a trimmer for a trimmer for grass, working on gasoline

For such a model, you should pay attention to the mower of the shaft:

The structure of the inertial coils

Undoubtedly, in order to fix the coil, you need to represent its structure and the principle of operation. Without exception, all inertias gather in factory conditions from the same type of nodes, differing depending on the dimensions of the mechanism with their sizes. The main components are the following parts and details of the product below:

Coil for trimmerpatriotdl-1214. It is easy to season a fishing line for a trimmer!

Depending on the modification and purpose of the inertia, or as it is also called fishermen, it can be supplemented by a specific functionality inherent in a certain model.

How to disassemblekatushitrimerimer. Replacing the fishing line by the diet.

In this Vyda, I am how to disassemble a gasoline trimmer, as well as how to wrap it correctly.

Usually, the diameter that can mow young grass does not exceed 1.6 mm. I have on a similar trimmer how to remove a coil from a trimmer for grass, and the garden, meanwhile, overgrown. The thicker the thread, the more rough the grass it is able to overcome.

There are fishing lines with sharpened faces in the form of a sprocket or square, such an option is more adapted to mowing dry grass just due to the existing sharp faces, but it is more wear and tear and it is inferior in strength to the round cord.

How to remove and put a reel on a lawn mower!

To carry out this operation, it is aimed to turn off the network and turn over the work head upward. The upcoming course of action is depending on the design of the structure of the coil itself:

• In small trimmers with the lower location of the engine, click on the button located at the edges of the coil and remove its highest part from the head;
• On trimmers with a bent rod, clamp the coil of the coil with one hand, immediately turning counterclockwise located on the hooding of the lambs;
• In trimmers with a straight bar and a gearbox, insert the screwdriver into the hole located under the coil, and then turn the body of the coil counterclockwise.

How to replace, remove the spitter of the electric trimmerblackdecker GL716 electric trimmer

How to change, remove the mowing of the electric trimmerblackdecker GL716 DOCTION of the repair or substitution.

https: // cylinder.com.ua/blog/kak_namotat_lesku_na_katushku_trimmera https: // Instrument-tehnika.ru/kak-PRAVILNO-NAMOTY-SLE-NA-KATUSHKU-TRIMMERA/https: // kupihome.ru/Podklyuchenie/Remont-Katushki-Trimmera-Svoimi-Rukami-Kak-Snyat-Razobrat-Sobrat-I-Ustanovit.obratno.HTML

Field winding algorithm

Depending on which model of the trimmer for grass is used, the type, thickness and length of the fishing line is selected. The diafle of the cord can be from 1.2 to 4 mm. It is not difficult to think of that the thicker you will refuel the cord, the more hard and thick grass it is able to cut off.

In order to find out which line of fishing line can be used on your mower, there are 3 methods.

• Look at the information about the thickness of the cord in the annotation to the apparatus.
• Look at the backpack itself. It can be given information about the likely dialects of the fishing line.
• Put the fishing line for the trimmer to the output. If it passes into it without effort, then the cord of such a diameter can be used.

wound on a coil in a mowing head. Therefore, at first it must be opened (this was mentioned above). There are 2 methods of winding the cord.

How to remove the coil and replace the fishing line for the trimmer

The owners of the trimmers, mainly beginners, confuse, bordering on panic, when it becomes necessary to change the cutting tool or fishing line for a trimmer in a reel. Very often, when trying to unscrew the mowing head, users simply make it unusable, not suspecting that it is unscrewed in the opposite direction. So that this does not happen, if you need to replace the tool, it is recommended to familiarize yourself with the step.by.step instructions given below.

• Before refueling the fishing line for the trimmer to the coil, drown out the engine of motorcycles or de.energize the ethletric trimmer for the grass to avoid injuries that may occur in case of accidental rotation of the cutting tool.
• Unscrew the nozzle mounted on the gearbox shaft. To do this, the shaft must be fixed by combining holes on the puck and on the axis, and inserting a metal rod or screwdriver into them.
• Unscrew the nozzle. You should know that the thread on the shaft is left. Therefore, to twist the coil of the trimmer for the grass should be right, that is, clockwise.
• Disassemble the mowing head. Most often, the head cover is attached to the fixers. To remove it, you need to drown these latches into the case, pressing the edges of the lid. If your trimmer has a semi.automatic mowing head, which has a button from below, then disassembling the nozzle should be done carefully, since you can lose a spring that sometimes flies away when removing the cover.
• Cut the required amount of fishing line. Usually its length is 5 meters. Use the cord of the diameter that is indicated in the instructions for the tool. It is not recommended to exceed the maximum diameter of the fishing line, since this will lead to increased load on the engine and greater consumption of gasoline.
• Find the middle of the segment of the cord, folding it in half. You will get a loop.
• Special grooves are cut out inside the coil (there may be holes). Insert the loop from the fishing line into this groove.
• Wind a fishing line for a trimmer to a coil, turning it counterclockwise. You need to refuel the cord as evenly as possible, the turns should be laid without ceiling and with good tension. When the winding is finished, leave the free ends of the fishing line about 20 cm long and fix them in the grooves located on the sides of the coil.
• Collect the braid head. Before you finally collect the nozzle, do not forget to insert a spring and washer (if it is available). Install the coil in the case, and prone the ends of the cord through the holes or eye.
• Dress the lid and fix it with latches.
• Screw the nozzle back to the gear shaft, also fixing it with a screwdriver. Tighten the coil of the trimmer for the grass will need to go to the left (against h. Arrows).

How to remove a spool from a trimmer for Patriot grass

His task. Uninterrupted transmission of torque from the engine to the wheels through the wedge belt. How to correct the fishing line for a trimmer on a trimmer coil for the grass many, having processed a factory fishing line for a trimmer on the recently received trimmers for grass, try to wind the most, but they cannot, because they do not know how to correct the fishing line for the trimmer coil for the grass. How to change the screwdriver bit. It’s no secret that it is easier and faster to unscrew and fix the screws. Any tool has the ability to wear out and fail. This is especially true for mobile and frequently used details.

In the screwdriver, this component is the cartridge. How to connect a single.phase electric motor through a capacitor: launching, working and mixed switching parameters in technology often used asynchronous motors. Such blocks are simplicity, good characteristics, low noise, ease of e light. How to change a trimmer for grass disk. Since we discussed the choice of trimer in the previous article, today we are going to show you how to cut your trimmer for grass with a braid fishing line for mowing hair and which option is best for your application. After you purchased a trimmer for the grass and launched it. How to unscrew the disk from a grinding machine.

Without this, neither there nor here! And if this suddenly does not succeed, you will have to dodge in every possible way, look. Installation of the ignition coil on a single tractor. Coil for black cutters. REPAIR OF CAMPILE OF THE IMPLECTIONAL LOTCHES OF CHALLICE OF CACLE. Chairman HT31. Part two Nemo Nemon. The coil of the trimmer for the grass is not unscrewed. Useful hacker. Review of the coil of an electric trimmer for Huter grass. This is not educational. I do not teach anyone how to collect, repair and the like. The situation has developed. How to make a trimmer for grass Andrei unwitted. How to change the piston for trimmers for grass.

In this I will show you how to quickly change the trimmer for the grass of the piston on your own. I will change to a trimmer for grass. Upper and lower transmission of a trimmer for grass. About the gearbox to the trimmer for the grass, the lower gearbox and the upper bell of the gearbox, how to understand how they differ. Service, service, setting. Business, finance macroeconomics. Production enterprises. Own business. Real estate, key. Accounting, audit, taxes. Other business areas. Debts, collectors. Dating, love, relationship love. Other relationships. Software.

Mobile devices. Education kindergartens. Additional education. Another education. Philosophy, unknown mysticism, esotericism. Others are unknown. Travel, tourism independent rest. Another tourist. Pregnancy, childbirth. Raising parents. Furniture, interior. Rural life. Wedding, wedding, marriage. Tighten or unscrew the nut, not fixing the shaft, will not work. To replace the cord, it will be enough to unscrew the screws, insert a piece of the mowing fishing line of the desired length and press it. The head for attaching the fishing line to it can also be made of a metal sheet.

How to do this can be understood from the following. Service centres. Technology News Calculators Brends Reviews Rating. Technique for a garden trimmer for grass Home.made repair of a trimmer coil for grass. One trimer coil device is two basic reels 2. Also interesting: the reasons for the breakdown of gasoline and electric trimmers. Why do speed fall on a trimmer for grass? REPAIRS AND LOVE LEVEL. A device has been created, indicates the presence of a mosquito in an apartment using a laser.

Instructions

In order to change the fishing line for the trimmer, it is necessary to extract the old one (if it was).

The coil is part of the design of the trimmer for the grass, which is located inside the head of the motorcosa, drum or bobbin. Depending on the manufacturers of the head can be different. But this article discusses only Patriot, although their mechanism is used by many other companies.

Now you need to understand how to properly remove the head from a trimmer for grass and how to get a drum out of it.

Eliminate the malfunctions of the automatic coil with a fishing rod for a lawn mower

Instructions on how to promote a hand head on a trimmer is described below.

• First of all, you need to clean the head of dirt and adhering grass if it is contaminated. To do this, you need to raise a motorcycle head up and, holding the casing, remove a special protective cover dressed on the drum.
• The next step needs to remove the reel from the drum. The coil is easily removed even with one hand, because it is not fixed inside the drum.
• The drum itself is fixed in the trimmer with a bolt. This bolt must be unscrewed, after which you can easily pull out the drum. To do this carefully, you should support the drum with a coil, while twist the screw counterclockwise.
• Now you can pull the coil out. As mentioned above, it is not fixed in anything except a hook with a metal shaft, so it does not need to be torn off with force. Neatly, in a circular movement you should pull the coil from the drum.
• Now it remains to extract an old fishing line for a trimmer and follow the following instructions.

Installation of the coil and drum in its former place is performed according to the opposite algorithm.

Before the process of refueling the fishing line, it is worth making sure that the thread suitable for a trimmer was bought. In the case when the thread is not suitable, the fuel or energy consumption increases, as well as the load on the motor motor.

In order to replace the thread itself directly, you need to prepare a piece of thread of the required size. Most often, this requires about 4 m fishing line. A specific figure will depend on the parameters of the thread, for example, its thickness, as well as on the parameters of the coil itself. If it is not possible to accurately determine the length, it can be done as follows: insert and wind the thread to such a state that the coil is completely charged (the level of the fishing line will be compared with protrusions in the sides of the coil). It is necessary to ensure that the fishing line for the trimmer sits in the coil exactly.

Do not forget that the thick thread will be shorter than thin.

The instructions for refueling the fishing line in the coil is described below.

The prepared thread must be taken and turned in half. It should be ensured that one edge is longer than the other by 0.1-0.15 m. Now you need to take the ends in different hands. The one that is smaller must be pulled to more, so that it becomes 2 times shorter. When bending, the indentation should be maintained at 0.15m. Find the slot inside the coil partition. Carefully prick the loop that turned out earlier in this slot. To continue work, it is necessary to determine the direction of winding the thread in the coil. To do this, just examine the coil. there should be an arrow on it. If the gunner could not be found, it is quite possible that there is a written designation. An example is given in the photo below. It is necessary to inspect the head of the coil. It has a direction indicator. However, this is the direction of the coil movement. To get the direction of winding, you need to wind in the opposite direction. Now you need to season the reel with a fishing line

It is worth noting that there are special guide grooves inside the coil. When wrapping a thread, you need to follow these grooves, otherwise you can damage a trimmer for grass

At this stage, you need to charge the coil very carefully. When the user winds up almost the entire thread, you should take the short end (do not forget about the protrusion of 0.15m) and stretch it into the hole located in the coil wall. Now you need to repeat this action similarly with another end (on the other hand). Put the coil itself in the coil head, before that, extinguishing a fishing line for a trimmer through the holes inside the drum. Now is the time to return the drum to your place. After that, you need to take with both hands by the ends of the fishing line and pull them to the sides. Then you need to put the lid in place (here you can safely make efforts until a characteristic click is heard). Remained to perform “cosmetic work”. You need to see if the thread has come out too long. You can start a trimmer for the grass and check in practice whether everything is comfortable. If the thread came out a little long, you can cut it with scissors.

How to remove and disassemble a coil

Before proceeding to the process of replacing the cord, users of trimmers need to remove and disassemble the coil. Consider how to do it.

The mowing head of a trimmer for grass consists of several parts: a casing, springs (not in all models), bobbins with a cord and cover.

In trimmers, 2 options for fastening the mowing head are most often used.

Option

To remove the head of the trimmer for the grass, it will require its complete disassembly.

• To remove the lid covering the inside of the head, it is necessary to press on the latch (latches) located on its two sides.
• Removing the lid, you will see the spool that must be removed from the body. In some coils, a spring is installed under the bobbin, which must be carefully pulled out so as not to lose it in the grass.
• Removing the bobbin, in the center of the case you will see a screw with a slot under a cross.shaped or flat screwdriver. It is possible that there may be a bolt under the hexagon or nozzle “Asterisk”.
• Using a screwdriver, choosing the necessary bat (nozzle), you need to unscrew the bolt (counterclockwise).

After extracting the fasteners, take up the part of the part and, shaking it in different directions, remove the gearbox from the shaft.

Option

In this version, the head is twisted onto the gear shaft. To remove it, you need to fix this shaft. To do this, in such trimmers, for example, in the Huter and Champion devices, a hole is provided through which you can insert either a thin screwdriver or a metal rod.

So, to remove the bobbin, take 2 simple steps.

• Insert the screwdriver into the hole and stall the shaft.
• Take the head of the head and start twist it clockwise. It should be twisted in this direction for the reason that the thread cut on the shaft is left.

Solving complex problems

Buyers say that four.stroke models are more massive, therefore, with the help of equipment where they are installed, you can carve the complex, shrubs overgrown with shrubs. If you are at times the task of haircuts of the lawn arises, but less, then there will be a lot of such power. In this case, experimental summer residents recommend choosing units with two.stroke engines that own the lowest weight and will cost cheaper.

General review of a trimmer for grass of gasoline Patriot Pt 2540

The Patriot PT 2540 device has a gasoline engine. The weight of the trimmer for the grass is small, it is easy to operate. The rod of the model is bent and with the possibility of disassembly, which facilitates the transportation of equipment. A variety of nozzles allows you to use a trimmer for grass as a cultivator, bureau and brushwood. The piston elements of the motor have a chrome coating.

The trimmer for the grass Patriot PT 2540 is functioning quite simple. with an increase in the number of revolutions, they rotate the spool and the fishing line for the trimmer. The load on the hands is reduced thanks to the shoulder belt, which equip the equipment. It is convenient to work with equipment to a person of any height, since all parameters are adjusted. The cutting of the cutting edge takes place in a semi.automatic mode, when the spool is pressed to the ground at the time of rotation, the fishing line for a trimmer from it goes to the desired size in length. Excesses are removed by a knife, which is equipped with a protective casing. It is recommended to reduce the load on the engine, developing the maximum speed during operation.

Technical characteristics of a trimmer for grass of gasoline Patriot PT 2540:

• Motor type. gasoline, two.stroke, located on top.
• Motor volume. 25 cm3.
• Power. 1.2 l.With.
• Fuel tank volume. 0.45 liters.
• Speasing size in width by fishing line or knife. 40 cm.
• Curved rod.
• D-shaped handle.
• The maximum rotation speed is 7500 about./min.
• Field diameter. 2 mm.
• Detaless shaft.
• The weight of the apparatus. 5 kg.
• The package includes a coil, a fishing line for a trimmer and a belt.

How much fishing line is wrapped

How much fishing line should be charged on a rogue rogue? Experienced fishermen always wrap the fishing line for the trimmer not the length that will be needed to perform casts, but with a huge supplies. This is necessary to secure from possible breaks. Also, if a wicker cord is used, at the end of the season you can change the sides of the cord in places, rewinding it to the other side. There will be a savings in expensive expenditure material.

Typically, each coil indicates the amount of fishing line of a certain thickness that a spool can accommodate. Even a few values ​​are usually prescribed. For example, “0.25/200 0.30/150 0.40/100”.

If you need to wind a certain amount of meters, you need to calculate what length of the fishing line is 1 turnover of the squel. After that, you can approximately calculate how many revolutions of the handle must be done to wind a certain amount of fishing line or cord. But it must be taken into account that the number of revolutions of the coil handle never corresponds to the number of turns of the fishing line on the spray. For example, in most ore.coils, a fishing line for a trimmer will make 5 turns with one turn of the handle.