Remaking Lawn Mowers Into Outboard Motor
The idea of a very light outboard motor for small boats, including the simplest ones. Rubber is of interest to many hunters and fishermen today. It is important to note that the cost of such a motor is quite high and maintenance, however, like the details. In this case, many very often began to use motor trimmers, which are now very popular and common.
What is a nozzle for remaking trimmer in boat engine
Principle of operation
The trimmer has a higher speed of rotation of the blades, which makes it possible to move through the water at a higher speed, which will allow you to start fishing faster than with a motor. Everyone saw how the trimmer works. How the lawn and ordinary grass are cut, but here, its blades are turned in the opposite direction and at the same time, it performs the function of the most economical motor.
But if the trimmer is lower, the speed will be lower. But the main drawback of the trimmer compared to ordinary boat motors is that they are very loud and should not be used to the full if you do not want to scare away the fish.
Is it worth buying a nozzle for remaking trimmer into an outboard motor
It is impossible to give an unequivocal answer to this question, since someone is very used to the motors on boats, while others have never used them. At the same time, if you want a really powerful boat, then naturally the most profitable and effective solution is to install a standard trimmer. But it is worth considering that this option is universal. As mentioned above. The most important thing is to correctly combine.
Many experts recommend blades similar to the blades of your old motor. It is very important that it is necessary to install in strict accordance with the instructions.
In addition, you should pay attention to the moment that you must take extra fuel with you, as well as a regular lawn mower, you should be given the opportunity to “rest” since due to very long use, the trimmer motor can simply fail directly on the water.
The larger the blades, the more effective the trimmer will be.
Alteration of lawn mowing is as follows:
Initially, there is an alteration of the main bent shaft: first, a regular nut is removed from the bobbin with a special fishing line. It is a small tube, the length of which is 20 mm.
At the same time, the nut must be preserved, since the thread on the lawn mowers is unusual and it is almost impossible to find the same.
Then the plastic pad with the keys is removed. After that, at the very end of the bent pipe, there is a standard bronze bushing (often called a plain bearing). It must be carefully cut out, then the stern shaft must be removed, the nut and metal shaft unscrewed.
The most important thing is to choose the right blades. Here, everything directly depends on what dimensions your boat has.
It is very important to pay attention to the factor that the best solution would be to enter “motors for a boat” in the search and go to the website where the engines are sold and ask a consultant who will offer you his help on the first website you get. You say your own dimensions car, and then, when you get a suitable motor, you need to look at the technical specifications and find out the dimensions of the blades.
Many will naturally ask why the trimmer is. It has a number of undeniable advantages:
- Very powerful;
- Has the main controls: starter, throttle;
- It is supplemented specially by the “foot”, which allows you to adjust the power.