Reviews About Caliber Et-1700v +

After I was tired of playing with the connection, I bought a rod from a petrol trimmer I thought it would work without problems, but it wasn’t necessary to cut the grooves in the tube (on the engine side) and rivet the hole on the gear side so that no debris gets into the tube and make the shaft shorter 149cm and in the standard 153-154 I don’t remember exactly.

I gave a friend a turner that shortened the shaft (cut a piece and inserted into the tube that the tube fell on both sides of the tube the modification entered the shaft tube without any problems), made grooves, the vibration is a little bit uncritical (added grease to the shaft will not be extra), but the connections are there’s no heart, and I also noticed that I bought an additional coil, it’s bigger and more weighty that there was practically no vibration in the set.After the modernization, it became much better nothing dangles and does not bend.

You can still make the shaft according to the drawings, it will be the desired length and the necessary hardening, but it is a little expensive for me, so WE choose a cheaper way.

Caliber’s website doesn’t work well with customers, it was advised to turn it into a service, I don’t need to give it to the service exactly, I need to solve the problem in general I contacted the seller T-mall they compensated for the work of the turner and promised to send a wish (to make a solid bar) to China but nothing depends on them.

This is how import substitution works. China makes it.

Build quality. If you have fantasies, then you can modify it yourself, come up with it, screw it up. Check for complexity.

A week passed, went to Mom to mow 10 acres. I thought that after the tests at my dacha (I mowed along the fence behind the plot) I wasted for 4 hours. The disappointment came after 3 hundred parts:1. All available screws on the steel rod spontaneously untwists (some are lost),2. The rod is rotated at the junction (put its nuts and washers, tightened tightly, wrapped the fixed bolt with electrical tape),3. The launch handle came off for 4 hundred parts (the start button was wrapped with electrical tape, turned on, turned off through the plug).

A year has passed! May came, grass has grown. Mowed hectare 20 together with last year’s foliage all to dust! Everything is also on top trimmer! Everything is in place, nothing has fallen off, the button is in place, the casing is also in spite of the fact that several times I caught the wire 6-ku, however, the cutting head is damaged but continues to mow the fishing line is fed properly. I ordered a new head, it’s cheap and the fishing line 1.6 star Kord has not ended, but they can’t mow the young grass just under the root!Good luck to all!

7 kg, complete with 1.6 mm fishing line, belt fastening with hook hook, it would be better to be fixed in 2 places for the trimmer body. Factory warranty is only 1 year. When installing the trimmer head, at the junction of the support and pressure washers, a small metal sound appears, from the line with the ends fully extended there is a distinct whistle in operation. The long grass is still slightly wound up, about mowing with fishing line, though it is cleaned easily, with one movement of the hand.

Reviews About Caliber Et-1700v +

14 and 14.5 rubles (for 50g), I bought them with a margin, (hex 5×12) they need to be screwed tightly, but look so that the plastic is not damaged in the places of fastenings. The screw connecting the shaft to the electric motor can be tightened without fear of damage, there is metal, there is nothing to worry about.

7 kg, complete with 1.6 mm fishing line, belt fastening with hook hook, it would be better to be fixed in 2 places for the trimmer body. Factory warranty is only 1 year. When installing the trimmer head, at the junction of the support and pressure washers, a small metal sound appears, from the line with the ends fully extended there is a distinct whistle in operation. The long grass is still slightly wound up, about mowing with fishing line, though it is cleaned easily, with one movement of the hand.

14 and 14.5 rubles (for 50g), I bought them with a margin, (hex 5×12) they need to be screwed tightly, but look so that the plastic is not damaged in the places of fastenings. The screw connecting the shaft to the electric motor can be tightened without fear of damage, there is metal, there is nothing to worry about.