Saw Log Into Planks Chainsaw

Another variant

There are a large number of similar attachments on the market. All of them are suitable for sawing logs into planks, they all have a similar design. But there are also differences. The photo below shows attachments for a chainsaw, which does not require additional attachments or tools to work with. In fact, this is a miniature hand-held sawmill, which is based on a gasoline saw.

The design is complemented by guides and wheels that move along the surface of the log, reducing drag. There are two pairs of wheels, they are located on opposite sides of the workpiece. It is convenient, easy, plus. the quality of the cut material increases.

The attachment is attached to the chainsaw in the same way as in the previous case. The main requirement for work is to accurately position the saw so that it is in a horizontal position. And although the oblique cut is the same, it is more convenient and easier when the tool is located exactly.

Special nozzle

To cut a log, you need a special attachment in the form of a metal frame, which is connected with two bolts to the body of a gasoline saw. The junction is the bolts that secure the working body (tire) inside the tool itself. The nuts must be unscrewed, the frame installed on them, the nuts that come with the frame must be screwed onto the bolts. They are wider, which increases the clamping area, increases the reliability of fastening the frame to the body of the chainsaw.

Such a nozzle can be made with your own hands from a profile pipe. The main thing is the accuracy of the frame dimensions.

Options for sawing logs on boards with a chainsaw

recently, a chainsaw was only used to cut logs across. Craftsmen could use it to make boards, rectangular bars, all kinds of wooden sculptures. It was not half the strength to the townsfolk. Experience, skill and talent were required. Today, chainsaw manufacturers offer, as an addition, various attachments that have turned the tool into a universal device with which you can cut not only wood, but also other building materials, such as stone. In the article, we will deal with one question. how to cut a log into planks using an ordinary chainsaw.

Cutting technology

One frame-attachment in the process of cutting logs into boards is indispensable. Because it needs a support, especially when sawing the upper part of a log with bark. That is, when the operation of turning a log into a bar is carried out. An additional tool made of two planks will be required.

Two boards 40-50 mm thick are fastened together so that they are in perpendicular planes. The device is attached to the log with self-tapping screws, from the ends it is propped up with additional stops from the same boards. In this case, the fastening is done so that the upper edge of the vertical board is below the upper edge of the log. That is, the distance between the edges determines the thickness of the cut slab.

It remains to install the chainsaw so that one part of the frame rests against the transversely installed board. This will be the support. The main plane of the frame will abut against the vertically installed part of the device.

The chainsaw turns on, the log starts cutting along with the set cutting thickness. The main task of the contractor is not to overload the tool with hand pressure. The saw, or rather the chain, will cut itself, you need to push it a little. After cutting the slab, the wooden device is dismantled, the log is rotated 90 °, the support installation is installed, the whole cutting process is repeated.

Attention! The wooden device is used only for cutting slabs.

As soon as the log turns into a bar, you can cut it into planks without using a wooden device. A bar is a lumber with a rectangular cross-section, it has four external smooth surfaces on which you can rest a chainsaw with a frame. You just need to press the frame against the cutting plane and move the tool along the workpiece. The frame has a thrust element located perpendicular to the entire structure, displaced across the cut. With its help, the thickness of the cut board is set.

To make it clear how logs are cut into boards with a chainsaw using a frame nozzle, watch the video below.

Homemade nozzles

Masters have long learned to do a lot with their own hands. There is a huge variety of frame structures on the Internet that allow a chainsaw to cut logs into planks. There are simple options for the manual type, there are large complexes of the bed, guides with the help of which the tool moves or the log is raised / lowered. One of them in the video below:

Chainsaw MILL | How to Slab a Log | Simple Cheap Portable

Please note that the structure is assembled from metal profiles, which makes it reliable and stable. At the same time, the machine (it simply cannot be called in another way) is equipped with mechanical gearboxes, which simplify the processes of moving the workpiece barrel and chainsaw. No effort with your hands, just twist the handle from the gearbox. In this case, the thickness of the boards is adjusted by raising the log, and not with a gasoline tool.

Another option is a nozzle, which helps to make a cut not in a horizontal plane, but in a vertical one. The design is simple, but it is more difficult to work with it, because you have to make an effort to hold the chainsaw. In addition to the device, it is necessary to prepare a strip of metal or a board, which is attached to the log in the longitudinal direction. It is on it that the nozzle frame rests when cutting is carried out.

In addition, this option is more dangerous, because nothing holds the board to be cut. She can hurt her leg when she falls. So the process must be carried out carefully. The video below clearly shows how this option works.

Another installation, which the manufacturer called the carriage. For this, such a frame structure was made from a profile pipe and several wheels, which will give the device some mobility in terms of moving the workpiece along the barrel. They are also a kind of stops that do not allow the chainsaw to move from side to side.

In addition to the carriage, a conventional aluminum ladder is used, which acts as a guiding element. It is attached to the log with clamps for nails or self-tapping screws.

Please note that the width of the ladder must match the distance between the carriage wheels located at different ends. The staircase must be placed horizontally with a building level. Align with pieces of boards of different thickness placed under it.

The prepared chainsaw with a carriage is installed on the ladder. Turn on the engine and push it with your hands along the workpiece, cutting off its upper part.

The process is better seen from the side. Here you can see a carriage with wheels, a ladder, a log lying under it, how the cutting process is carried out.

The design of this type of device is quite complex. But of the many home-made options for the manual type, it is better, more convenient, more reliable. Now it is possible to adjust the height of the cut horizontally, pre-setting the ladder along the horizon.

Generalization

As it turned out, an ordinary chainsaw is a universal tool. If you choose the right attachment, it can replace a large number of instruments. over, some nozzles are easy to make with your own hands, the benefit of their design can be found in the public domain. The internet is full of variations.

Overview of some options

We will tell you about the two most popular designs that provide the best quality at work, and you yourself will determine which is more convenient and preferable in your case.

Turnkey solution

The Big Mill Timberjig option is very popular, this is a special set for the equipment of a mini sawmill. Sawing logs into planks with a chainsaw with this device is simple and efficient.

By purchasing this option, you get everything you need, we will tell you about how to organize the cutting of logs:

The design is very thoughtful and is simple and reliable.

• First you need to connect two strong and even boards together. as a result, you should have a T-shaped structure. This will be a persistent ruler.
• Next, make two L-shaped stops. the delivery set includes corners that are designed specifically for these purposes.
• Roll up the log and position it on comfortable and secure blocks. Attach supports to its ends with self-tapping screws, you should not use nails, since it is much more difficult to remove them later.
• Next, a ruler is attached to the installed wooden supports. this is done by means of clamps, which are also included in the kit, while remember that the cutting line does not go along the edge of the guide, but 10 millimeters higher.
• Before cutting the log into planks with a chainsaw, we advise you to raise one side by about 30 degrees. it will be much more convenient to work this way. Fix this position with the help of two supports, if something is not clear to you in the description, look at the photo, everything is shown clearly on it, in addition, the kit always comes with instructions with detailed diagrams.

How to dissolve a log into planks with a chainsaw? This device allows you to do this easily and quickly.

Benefits of using this option

First of all, let’s figure out what advantages this sawing method has:

Ability to work in any conditions	Unlike electrical equipment, which is afraid of high humidity, the chainsaw is capable of working in the most unfavorable conditions, while no damage to the structure will be caused, because all units in the chainsaw are adapted to work outdoors and even under precipitation
Operability	If you are going to work for a long time, then you will need equipment with a capacity of about 7 horsepower or more, it is able to withstand significant loads, while the quality of work will be consistently high
Autonomy	Since the device runs on gasoline, you do not depend on electricity and can build a structure for sawing in any convenient place. This is especially convenient when working in areas where there are no power lines
Convenience	The inertial brake in chainsaws is faster than in electrical systems, and the smooth starting and variable speed of the chain ensures high quality performance, even if you are not experienced.

Important!
In addition to all of the above factors, one should not forget the low cost of the structure, the purchase of a stationary sawmill will cost several times more.

Another plus can be considered the mobility of the device, you can easily transport it to the desired place

How to cut a log along a chainsaw. an overview of the most effective devices

In the process of carrying out various works, there is often a need for longitudinal cutting of logs or timber. For this, a wide variety of types of equipment can be used. from stationary sawmills to small installations, but these options cost a lot, and if you need to perform a small amount of work, then sawing logs with a chainsaw will be the simplest and most rational solution.

On

Homemade option

First, let’s look at how to make a device for sawing logs with a chainsaw with your own hands.

The instructions for carrying out the work are as follows:

• It is best to use a frame from an old school desk or a square tube with a side of 20×20 or slightly larger.
• First of all, two clamps are made, these are elements 50-60 cm long, at one end of which a cross member is welded with two holes for tie bolts and a small protrusion in the middle for clamping the tire, an element of the same configuration is attached on top, the photo below shows ready-made elements, as you can see, everything is quite simple, and having a welding machine at hand, you can make them very quickly.

The clamps should be sized so that the bolt width is slightly wider than the tire height.

• To make longitudinal sawing of a log with a chainsaw, a support frame is needed, the width of which should be 7-8 centimeters less than the length, two 10 cm long elements are welded perpendicularly to two of the sides, they should be slightly larger so that the clamps fit into them, they need install two fixing bolts, for this, a hole is drilled and nuts are welded in order to tighten the fasteners in them, a handle is welded in the middle for ease of movement.
• The system is assembled in the following way: first, the clamps are inserted into the grooves, after which the chainsaw tire is inserted and carefully fixed. The distance is selected depending on the thickness to be cut. To understand how this is done, look at the photo, which shows the assembled structure, the price of the issue is several metal elements and welding rent for an hour.

This is what the device looks like after assembly

Now we will tell you how to cut a log into boards with a chainsaw using this design:

• You will need two goats that will serve as supports, they should be high enough to ensure ease of use.
• A sturdy metal rail or sturdy board works best as a guide. You can make this element from a corner or other metal products.
• A log is placed below, which must be set to the desired height, after which work can begin. After the first pass, the log is lifted to the desired height, and the process is repeated.

The work is done quite simply, the main thing is to set everything accurately and fix it securely

Important!
Do not forget that to work on the chainsaw, a chain must be installed for longitudinal cutting of wood products, this will ensure high speed and high-quality sawing.

It is possible to dissolve logs or beams onto boards without a sawmill or other massive equipment, an ordinary chainsaw, after a small upgrade, can become your best assistant. The video in this article will help you understand this topic even better.

How to cut a log along a chainsaw. an overview of the most effective devices

On

• 1 How to cut a log along a chainsaw. an overview of the most effective devices

• 1.1 Benefits of using this option
• 1.2 Overview of some options

• 1.2.1 Homemade option
• 1.2.2 Ready-made solution

1.3 Conclusion

2 Features of cross cut

3 Overview of some options

3.1 Homemade option

3.2 Ready-made solution

4 A device for sawing logs with a chainsaw: learning to make with your own hands

4.1 Classification of attachments for chainsaws for sawing logs

4.2 Do-it-yourself chainsaw rip saw attachment

4.3 We make goats for cutting firewood with a chainsaw ourselves

5 Safety rules during work

Homemade option

First, let’s look at how to make a device for sawing logs with a chainsaw with your own hands.

The instructions for carrying out the work are as follows:

It is best to use a frame from an old school desk or a square tube with a side of 20×20 or slightly larger.
First of all, two clamps are made, these are elements 50-60 cm long, at one end of which a cross member is welded with two holes for tie bolts and a small protrusion in the middle for clamping the tire, an element of the same configuration is attached on top, the photo below shows ready-made elements, as you can see, everything is quite simple, and having a welding machine at hand, you can make them very quickly.

The clamps should be sized so that the bolt width is slightly wider than the tire height

To make longitudinal sawing of a log with a chainsaw, a support frame is needed, the width of which should be 7-8 centimeters less than the length, two 10 cm long elements are welded perpendicularly to two of the sides, they should be slightly larger so that the clamps fit into them, they need install two fixing bolts, for this a hole is drilled and nuts are welded in order to tighten the fasteners in them, a handle is welded in the middle for ease of movement.
The system is assembled in the following way: first, the clamps are inserted into the grooves, after which the chainsaw tire is inserted and carefully fixed. The distance is selected depending on the thickness to be cut. To understand how this is done, look at the photo, which shows the assembled structure, the price of the issue is several metal elements and welding rent for an hour.

This is what the device looks like after assembly

Now we will tell you how to cut a log into boards with a chainsaw using this design:

You will need two goats that will serve as supports, they should be high enough to ensure ease of operation.
A sturdy metal rail or sturdy board works best as a guide. You can make this element from a corner or other metal products.
A log is placed below, which must be set to the desired height, after which work can begin. After the first pass, the log is lifted to the desired height, and the process is repeated.

The work is done quite simply, the main thing is to set everything accurately and fix it securely

Important!
Do not forget that to work on the chainsaw, a chain must be installed for longitudinal cutting of wood products, this will ensure high speed and high-quality sawing.

Cross-cut features

Cross-cut is used only for creating firewood or interior elements. The work is carried out according to several principles:

Before carrying out work, the log is placed in a horizontal position on supports. The height of its location should be 0.5 m. After that, it is necessary to completely clear the log from bark. The next step is to make marks on the entire log, located at an equal distance from each other. Then, according to the created marks, you can cut.

No special tools required for cross-cutting.

It is possible to dissolve logs or beams onto boards without a sawmill or other massive equipment, an ordinary chainsaw, after a small upgrade, can become your best assistant. The video in this article will help you understand this topic even better.

Source: rubankom.com

The chain saw is a universal tool for the summer resident

A chainsaw, often referred to as a chainsaw, is a chain hand tool powered by a two-stroke (in most cases) internal combustion engine. This popular mechanism is indispensable in any home garden. The saw is compact yet powerful. It works without breakdowns for a long time in an autonomous mode, due to which it is allowed to be used in any locality and in a position convenient for the user. The chainsaw has other advantages:

Equipped with mechanisms for selecting the operating speed and smooth start. Thanks to this, the risk of an open circuit is minimized. Can be used in high humidity. Does not require electrical energy. It is characterized by high power indicators (noticeably higher than that of a power tool). Has a fast-acting inertial brake.

The chainsaw is a chain hand tool

The main advantage of a gasoline saw is the ability to equip it with various attachments. It is they who make it a universal tool, indispensable for a home craftsman. With the help of a chain saw, logs are cut, stone, metal, brick, tile building materials are cut, bark is removed from wood, mounting grooves and various grooves are cut in bars.

The functionality of the tool can be expanded even more, the main thing is to choose the right attachment or equip it with a special device.

We will not describe all the possibilities of the chainsaw. Within the framework of this article, we are only interested in the issue of sawing logs with a chainsaw. About the features of doing such work with your own hands further.

Electric saw for aerated concreteNail electric for nailsWorking with a level

Classification of attachments for chainsaw for sawing logs

Depending on the direction in which the sawing will be carried out, all existing chainsaw attachments are divided into 2 broad groups:

for longitudinal cutting of wood;
for cross sections.

Both categories represent a range of industrial adapters that allow you to obtain boards and lumber of the required size, which can then be used for construction or renovation.

When there are no factory options at your disposal, the only sure way is to make their counterparts at home.

Overview of some options

We will tell you about the two most popular designs that provide the best quality at work, and you yourself will determine which is more convenient and preferable in your case.

A device for sawing logs with a chainsaw: learning to make with your own hands

A huge number of domestic and industrial tasks require sawing wooden logs. For this, a whole arsenal of auxiliary equipment has been created, most of which is very expensive, which is why it is used only as a last resort. It is much easier to use a chainsaw for this, for which all kinds of auxiliary means have also been invented, greatly simplifying not only the process of preparing firewood, but also opening logs onto boards, even without the help of a stationary sawmill. In this article we will talk about what they are and what is required for their self-production.

The advantage of sawing logs with a chainsaw

Sawing into boards can be done with tools such as a chainsaw and accessories designed to make the job easier. When choosing certain products, it is necessary to focus on the volume of the proposed work. Stationary sawmills are of high cost and are purchased only if it is planned to organize a business to create boards.

The most accessible tool for work is a chainsaw. Such devices have several advantages over electrical ones:

• the chainsaw can be used anywhere, regardless of the presence of an electrical network;
• the tool is suitable for working in high humidity conditions;
• professional chainsaws are significantly superior to electric ones in power;
• you can use the chainsaw continuously for an hour.

For sawing logs into boards, together with a chainsaw, a special frame is used, which is fixed to the device and allows you to create boards of the same thickness. You also need a device to secure the log in one position. In addition, you will need a guide.

Since household gasoline saws are not designed for heavy loads, it is worth using professional tools for sawing logs. When choosing, you should pay attention to devices with a capacity of more than 7 horsepower. Before work, the fixed frame is adjusted in accordance with the selected width of the boards. To create a frame, you can use the legs from a school desk or metal corners.

Features of sawing logs when using a chainsaw

It is quite simple to create additional equipment for sawing logs:

• To create a support, a frame is used, which can be created from the legs of a school desk. The most suitable are pipes with a square section of 20 × 20 mm.
• When constructing the frame, it is necessary to create 2 clamps, and fix the crossbar at one end. This element must have holes for the tie bolts. A protrusion for the tire is created in the middle.
• In order to cut a log lengthwise, it is necessary to design a support frame, the width of which should be at least 8 cm in length.
• For the convenience of work, a handle should be welded to the frame.
• Before carrying out work, it is necessary to carefully check whether the frame is securely attached to the tire.

Using a homemade tool is easy enough. Before sawing, you need to install 2 trestles. they will be used as a support for the log. In addition, a metal rail or flat board is prepared, which will serve as a guiding element.

Types of working attachments

The choice of attachments for work depends on the volume and type of work being done. The following devices are used with a chainsaw:

• drum debarker, which is necessary for removing bark from logs;
• lightweight nozzle for sawing logs;
• standard nozzle used for making boards.

How to cut a log into planks with your own hands and not spoil the materials

Beams and planks are common materials used in house construction. In the absence of funds for finished materials, you can make them yourself using a chainsaw. Before you cut a log into planks with your own hands, you should learn more about the features of this process.

Sawing technique along

The most difficult step in the process is making the first cut. For this you need:

• install a guide ruler, which consists of two boards that are fastened together at an angle of 90 degrees;
• after that, it is necessary to place the log to be sawn on the supports and fix it;
• then it is important to check if the log is level;
• at the next stage, it is necessary to fix the leading ruler on the supports using self-tapping screws;
• after that you can start creating the first saw cut.

Lighter

The nozzle for removing bark from logs is applied due to the wedge transmission. Attachment takes place with belts. special pulleys are used for this. It should be noted that the performance of the nozzle can be changed, since the shaft rotation speed depends on the size of the pulleys.

Lightweight nozzle

Such devices are often used, but they should only be used when boards are being created for fences or sheds. This is due to the fact that the attachment of the nozzle on the tire occurs only on one side.

Wood balance when sawing

Diameter of logs

Volumetric output,%

sleepers

boards

general

sawdust

piece. ex.

Types of cutting logs

Sawing logs into boards is carried out in two main ways:

• radial
• tangential.

In addition, additional methods are possible:

• mixed
• semi-radial (rustic)
• central.

Radial sawing is a type of sawing during which the axis of the cut runs through the core of the log and, as a result, the annual rings in the section of the board form an angle of 76. 900. The lumber obtained with this cut has a uniform color and texture. Timber is almost not subject to deformation during shrinkage and does not swell when wet, because the dimensions of the wood change mainly along the mowing line of the rings (across the fibers). In radial sawn timber, the annual rings are located in thickness. Such materials are distinguished by the highest performance indicators in comparison with other types of sawn timber.

Tangential sawing is carried out along tangential lines to the annual rings at a short distance from its core. The layers of the resulting boards are distinguished by a pronounced texture and a bright wavy pattern of annual rings. Such sawn timber is characterized by higher shrinkage and moisture swelling coefficients compared to radial sawn boards. As a result, they are strongly deformed when exposed to moisture. Such boards are in demand for use in dry conditions.

Rustic (semi-radial) and mixed types of sawing have signs of two main types of sawing at the same time: radial and tangential. Therefore, they show average shrinkage and swelling rates. Rustic cut boards are distinguished by straight lines of annual rings, which are located at angles of 46. 75 degrees. to the layers. Mixed sawn timber differs in that the mowing line changes from straight at the edges (in width) of the board, to arched towards the middle.

The center cut is made directly in the center of the trunk and contains the core. Taking into account the fact that the core of the trunk is the wood with the lowest strength values, center-cut sawn timber is characterized by a structure that is not uniform in strength.

How to cut a log into planks

Wood, like natural stone, is one of the most ancient building materials. Despite the huge selection of various artificially created materials existing today on the construction market, timber is still highly popular. In order to get high-quality lumber, the log must be cut into boards. In this article we will show you how to cut a log into planks.

Log sawing tools

Tools and cutting methods depend on the total volume of the logs, such indicators as length, thickness. In addition, you need to take into account the quality of the future lumber. Sawing a log involves working with different tools and specialized equipment. In order to get a small volume of lumber at home, a manual method of processing logs using a chainsaw or traditional hand-held hacksaws with teeth for longitudinal cutting is suitable.

The sawmill is perhaps the most famous type of sawmill equipment. This is a woodworking machine in which gang saws are present. On the sawmill, longitudinal sawn timber is obtained, for example, edged boards or beams. Sawmills allow processing logs with a diameter of 15 to 80 cm and a length of up to 7 m.

Sawing logs into boards using circular saws (circular) machines is carried out using a circular saw. Such equipment can be single-saw (single-disc) and multi-saw (multi-disc). Devices containing one disc are suitable for handling small and low quality feedstock. Large diameter round workpieces can be cut with multi-blade machines.

The most popular today are band sawmills. They are of two types: vertical and horizontal. The cutting tool in such equipment is a belt blade that is put on the pulleys. Working with band saws guarantees high quality longitudinal and mixed sawn timber such as boards and beams. This produces the least amount of waste.

In large industrial enterprises, mowing lines are used to cut wood. They allow for very high surface quality and precise geometry of the final products. These mowing lines are characterized by the highest performance.

In addition to all of the above equipment, such types of highly specialized sawmill equipment are used, such as debarking, edging, band-dividing and other types of machines.

Sawing logs into planks with a chainsaw

Very often there are situations when you need to make a very small amount of boards or beams for your own needs. Of course, buying machines in this case is not an option at all. Having certain knowledge and skills, it is much more profitable to cut logs with your own hands, using an electric or gasoline chain saw. Despite the fact that this work is quite laborious, the result is quite justified.

Most experts believe that a chainsaw is better suited for this purpose. Such equipment has high power and can function without interruption for a long time. In addition, the work of the chainsaw does not need electricity, so you can work far from the power supply, for example, right on the plot.

In order to cut a log into planks using a chainsaw, you will also need special tools such as a mechanism for securing the log, a frame-attachment for a chainsaw, and a guide for cutting. The attachment frame must be attached to the tire of the chainsaw so that it is possible for them to adjust the gap between it and the chain. This will make it possible to create boards with different thicknesses. It is worth purchasing a special chain for longitudinal sawing. It has a special sharpening angle. The guide ruler can be made from a metal profile of the required length or a flat rigid board.

Before starting work, you need to remove all the bark and remaining branches from the blanks, and also carefully examine the log for various flaws. In this way, you can choose the most suitable cutting pattern and, therefore, reduce the amount of possible waste.

If you are ripping logs, you need to ensure that the resulting lumber is of the same density across the entire width. Since the density of wood from the northern part of the log is much higher than from the southern part, the sawing is carried out in a plane directed from east to west (or in the opposite order).

The first step is to remove the slabs from two opposite ends of the log. As a result, a two-edged beam will be obtained, which is then cut into boards of equal thickness or other lumber, according to the planned sawing scheme. The end product is an unedged board, from which the edges must be removed.

Lighter

The nozzle for removing bark from logs is applied due to the wedge transmission. Attachment takes place with belts. special pulleys are used for this.

The advantage of sawing logs with a chainsaw

Sawing into boards can be done with tools such as a chainsaw and accessories designed to make the job easier. When choosing certain products, it is necessary to focus on the volume of the proposed work. Stationary sawmills are of high cost and are purchased only if it is planned to organize a business to create boards.

The most accessible tool for work is a chainsaw. Such devices have several advantages over electrical ones:

• the chainsaw can be used anywhere, regardless of the presence of an electrical network;
• the tool is suitable for working in high humidity conditions;
• professional chainsaws are significantly superior to electric ones in power;
• you can use the chainsaw continuously for an hour.

For sawing logs into boards, together with a chainsaw, a special frame is used, which is fixed to the device and allows you to create boards of the same thickness. You also need a device to secure the log in one position. In addition, you will need a guide.

Since household gasoline saws are not designed for heavy loads, it is worth using professional tools for sawing logs. When choosing, you should pay attention to devices with a capacity of more than 7 horsepower. Before work, the fixed frame is adjusted in accordance with the selected width of the boards. To create a frame, you can use the legs from a school desk or metal corners.

How to cut a board lengthwise

For carpenters, boards and beams are the most common blanks, of which the production of handicrafts and wood products is carried out in the future. And the first thing the material is subjected to is sawing into pieces of the required length. At the same time, you should know how to cut the board evenly, because the incorrect execution of this operation can ruin the workpiece or significantly affect the appearance, and not for the better.

At large enterprises, the problem of how to exactly saw off a bar or board does not arise. Any serious production has high-precision equipment that performs this type of work. At home, you have to make do with what is at hand. At the same time, you still need to be able to use the tool or equipment correctly in order to saw off the board correctly, and the cut turned out to be flawless.

Note that many companies that sell boards and beams provide cutting services. And for this they use all the same specialized equipment, so the purchased material will be cut efficiently. But it is not always possible to use such a service, and it often happens that you only need to saw one workpiece.

Circular saw. high productivity and ease of use

The circular saw is the best option for the job. It has excellent performance and allows you to cut a considerable number of blanks in a relatively short time, and with high quality. In addition, such a saw allows you to make a longitudinal cut in the material, but you need to know how to cut the board along exactly.

One of the most important criteria when choosing a circular saw is the maximum cutting depth. There are devices on the market that cut materials with a thickness of 30 to 130 mm. That is, you can choose a machine both for cutting only thin boards, and for sawing bars.

It is also worth paying attention to the cutting tool itself. Discs with a large number of teeth will provide a neat, high-quality cut, while the cutting speed will be low.

Cutting the board at home

You can cut a board at home with tools and equipment such as:

• a circular saw;
• hand saw;
• angle grinder (“angle grinder”).

Each of these options has its own specifics, which is important to consider before starting work, that is, you need to know how to cut a bar or board with this or that tool so that the cut quality is acceptable.

How to cut a log into planks with your own hands and not spoil the materials

It should be noted that the performance of the nozzle can be changed, since the shaft rotation speed depends on the size of the pulleys.

Lightweight nozzle

Such devices are often used, but they should only be used when boards are being created for fences or sheds. This is due to the fact that the attachment of the nozzle on the tire occurs only on one side.

Types of working attachments

The choice of attachments for work depends on the volume and type of work being done. The following devices are used with a chainsaw:

• drum debarker, which is necessary for removing bark from logs;
• lightweight nozzle for sawing logs;
• standard nozzle used for making boards.

How to cut a log yourself along with a chainsaw

Planks and beams are one of the main building materials. But not everyone has the financial ability to buy ready-made boards. In such situations, one of the solutions is to independently engage in timber harvesting on a plot taken in the forestry.

The advantage of a chainsaw as a sawing tool

You can cut a log using a sawmill, a petrol or saw and additional devices. When choosing one of these tools, consider the amount of work to be done. The cost of the cheapest stationary sawmill, together with all the accessories, is 150 thousand rubles. The chainsaw is much cheaper. It is more convenient than a saw for the following reasons:

• No electricity is required to operate the tool. this makes it possible to use the chainsaw on the plots.
• powerful than an electric saw.
• Starts smoothly and allows convenient speed adjustments, reducing the chance of chain breakage.
• The overrun brake responds faster than a saw.
• Long working time without interruption. up to one hour.
• Can be used in high humidity conditions.

Types of working attachments

When sawing logs with a chainsaw, various attachments are used.

• Rip saw attachment. It is used for sawing a log lengthwise, the process takes place in a horizontal position. After work, the master gets the same thickness for the product. The finished materials undergo a drying process, after which the boards are used in construction. In appearance, the device is a small frame, it is attached to the tire on each side.

• Drum debarker (gummer). With the help of such a nozzle, it is easy to dissolve the log, it works due to the V-belt transmission. Attaches to belts on both sides using special pulleys. The speed of rotation of the shaft depends on the size of the pulleys, so the performance of the nozzle is easy to change. This technology forces the master to carefully monitor each stage of the process; some specialists use an assistant during this cut. But this option requires increased security measures.
• Sawing with a lightweight nozzle. The method is not very efficient, but it is used quite often. The element is fastened on one side, but the workpieces are slightly uneven. Such materials are necessary for the construction of sheds or fences.

Features of sawing with a homemade tool

You can easily cut a log into planks using a self-made tool. It is not difficult to make it. To do this, follow these steps:

• As a support, you need to use a frame from a school desk or a pipe with a cross-section in the form of a square, its optimal size is 20×20, and more is allowed.
• It is necessary to build two clamps, at one end mount a cross member with two holes for tie bolts, in the middle make a ledge for the bus.
• For longitudinal sawing of logs into boards, you need to make a support frame, its width should be seven to eight centimeters less than the length.
• Then, two parts ten centimeters long are welded to both sides, holes are made for bolts, a handle is attached in the middle for ease of use.
• Then you need to insert the clamps into the grooves, install the bus, fix everything carefully.

It is not difficult to work with a homemade tool, for this you will need goats, they will serve as a support. In addition, you need to prepare a metal strip or board to use as a guide. A log is laid from below, the required height for work is set.

The order of the preparatory work

To cut a log lengthwise, you need to perform the following sequence of actions:

• Take two straight boards and attach one to the other at right angles. The result is a solid flagship line.
• To support the made ruler, you need to make stops from the boards.
• Barrels must be moved using a turner.
• The log should be placed on a comfortable base.
• On the tire of the chainsaw using nuts, you need to fix the frame.
• Lead ruler supports must be attached to the ends of the log, checking the horizontal position with a level.
• Self-tapping screws must be used to fix all brackets and structural elements. Nails are not suitable for these purposes, since they are difficult to remove in the future without causing damage to structural parts.
• The guide ruler must be attached to the supports using staples and its height must be adjusted taking into account that the cut will not go along it, but approximately one centimeter higher.
• The log must be rotated and the second plank must be fixed in such a way that it rests on the ground and supports the log.

Sawing logs with a chainsaw. efficiently and safely!

Boards are actively used for various construction and renovation activities. This material can be made independently from any suitable log using a regular chainsaw.

• 1 Chainsaw. a universal tool for a summer resident
• 2 Sawing attachments and accessories. the DIYer will appreciate!
• 3 We take a log and get boards from it!
• 4 Sawing the trunk across. there will be no difficulties!

A chainsaw, often referred to as a chainsaw, is a chain hand tool powered by a two-stroke (in most cases) internal combustion engine. This popular mechanism is indispensable in any home garden. The saw is compact yet powerful. It works without breakdowns for a long time in an autonomous mode, due to which it is allowed to be used in any locality and in a position convenient for the user. The chainsaw has other advantages:

• Equipped with mechanisms for selecting the operating speed and smooth start. This minimizes the risk of chain breakage.
• Can be used in high humidity.
• Does not require electrical energy.
• It is characterized by high power indicators (noticeably higher than that of a power tool).
• Features a fast response overrun brake.

The chainsaw is a chain hand tool

The main advantage of a gasoline saw is the ability to equip it with various attachments. It is they who make it a universal tool, indispensable for a home craftsman. With the help of a chain saw, logs are cut, stone, metal, brick, tile building materials are cut, bark is removed from wood, mounting grooves and various grooves are cut in bars.

The functionality of the tool can be expanded even more, the main thing is to choose the right attachment or equip it with a special device.

We will not describe all the possibilities of the chainsaw. Within the framework of this article, we are only interested in the issue of sawing logs with a chainsaw. About the features of doing such work with your own hands further.

Sawing a log with a gasoline saw can be done after it is equipped with different types of devices and special attachments. It is not difficult to get relatively flat boards from the trunk of an old dried tree at your summer cottage if you install a standard nozzle for longitudinal cutting of wood on your chainsaw. An important point. You won’t get perfect boards with this attachment. But the cut products can be used to build a fence around the site or a simple barn.

A nozzle for longitudinal cutting of wood is installed on the chainsaw

If the tool is to be used stationary, the chainsaw guide is made from a flat wooden block or from a metal profile. It should be as tough as possible. The ends of a self-made guide are attached to the trestle. A log for sawing is then laid under this structure. The process of its processing will take place quickly and without unnecessary labor costs.

It should be noted that the described technique is used exclusively for cutting small trunks in length. If you take a longer log, the guide will bend. As a result, the trunk cannot be cut efficiently and evenly.

A flawlessly even cut is obtained using a leading ruler (instead of it, a special guide is often used), which is commonly called a straight template. It is, in fact, a small machine, recommended for cases when work with wood is done more or less regularly. Such a miniature sawmill for longitudinal sawing has. If you will use it “once in a hundred years”, it is better to do with the homemade device, which was described above.

A miniature sawmill is required for those who work with wood regularly

Both the factory device and the self-made structure cut the logs according to the same pattern. Longitudinal cutting is carried out using a special chain. Finding her can be difficult. But there is a way out. Sawing trunks lengthwise can be done with a regular chain. You just need to sharpen it carefully at a 10-degree angle. An important point! During operation, the tool quickly loses its original sharpness. Therefore, it must be constantly sharpened so that cutting logs into boards does not cause difficulties, and the geometry of the resulting products meets the stated requirements.

Sawing logs into flat boards with a chainsaw equipped with a device is performed as follows:

• 1. Take two straight and sturdy boards. Connect them at right angles to each other. The result is a robust straightforward pattern.
• 2. Make the simplest stops from wooden blocks. Support the template you made.
• 3. Place the barrel on the device.
• 4. Fasten the frame to the rail, attach the supporting elements supporting the leading ruler to the ends of the log. The last operation requires horizontal installation. Use a building level for control.
• 5. Secure all existing elements with self-tapping screws. Some craftsmen use nails for these purposes, which is undesirable. After cutting the logs into planks, you will have to dismantle the used fasteners. It will be difficult to do this without tangible damage to the structure.
• 6. Fix the template to the supports, adjust it in height. Nuance. The cut will go somewhere 10 mm above the level of the ruler, and not strictly along it. Consider this when adjusting the height.
• 7. Turn the log. Turn on the chainsaw. Make your first cut.

Then you need to free the log from stops and boards, fix the template on the cut surface so that it looks in the direction of the second cut. The ruler can be supported to the ends or directly to the surface of the barrel. Make a second cut. In relation to the first, it will be perpendicular.

Next, turn the log, fix it. The ruler can be removed. We will perform further sawing without it. one of the cut sides of the trunk will act as a guide. You need to adjust the thickness of the cut on the frame, saw off the log to get a bar with bark on only one side. Now turn the barrel again. Adjust the frame. Carry out the final sawing. you get the boards at your disposal. If their width is not important to you, there is no need to cut the trunk under the timber. Simply cut the workpiece to the middle, turn it 180 °, then continue the operation you started.

As you can see, longitudinal sawing with a chainsaw is a rather laborious process. If you want to get logs by sawing the trunk across, and then making boards from them, the operation will be impractical due to the high cost of effort. Most often, transverse cutting is used when it is necessary to make outdoor furniture from the country. tables, benches, small benches. It is also recommended for harvesting firewood and for decorating garden paths using sawn wood blocks. In such situations, the logs are cut into discs of small thickness (up to 15 cm).

Cross cutting is used in the manufacture of country furniture

The cross-cutting process is as follows:

• 1. Place the trunk on 70-80-meter high trestles (they should be as stable as possible).
• 2. Remove bark from the wood, if any.
• 3. Make a small cut. It will play the role of a guide groove.
• 4. Turn the barrel to be processed 90 °. The tire of the gasoline-powered tool must go strictly along the intended groove.
• 5. If you need logs, place notches on the tree with an ax.
• 6. Sawing the trunk.

Cross and longitudinal sawing of logs must be carried out in compliance with safety standards. It is advisable to perform work in tight clothing, gloves, glasses, headphones. Prepare a first aid kit in advance. a chainsaw is a potentially unsafe tool that can cause serious injury to a person. Always move the saw forward on the rail and do not push hard on it. The tool must run freely.

Do not lift the chainsaw above your shoulders. The tool should only be run on the ground. In this case, the chain brake must be in the engaged state. Its release is carried out just before the start of cutting the logs. Do not refill the gasoline container if the saw has been used recently. Wait until the tool and fuel tank have cooled down. Take care of the safe execution of work. And then self-sawing of tree trunks will not lead to sad consequences. Good luck.

Types of cutting logs

Before you start cutting the workpiece, you need to decide how to get a high quality end product with the least amount of waste. The wood is not uniform in quality, the lower part of the trunk yields the most valuable lumber. When sawing from a log, you can get the following types of sawn timber:

• timber. lumber, more than 10 cm thick and wide. The most common type is a four-edged timber, square in cross section. It is used as a building material and in the manufacture of furniture;
• board. sawn timber, up to 10 cm thick and twice the width. Boards are obtained from logs or beams and are used in construction and furniture industry.

With theoretical knowledge and practical skills, you can make boards and bars with your own hands.

Benefits of sawing logs with a chainsaw

Saw and ax, as woodworking tools, have long faded into the background, giving way to more productive gasoline and saws. The chain saw operates with a two-stroke gasoline engine; a sharpened chain is a working tool. Main advantages:

• high productivity, which greatly facilitates human labor;
• mobility, it is easy to transfer it from place to place, to load it into a car, it is not tied to an energy source;
• can be used in conditions of high humidity and even during rain;
• the possibility of using various types of attachments to perform different tasks;
• ease of use;
• financial affordability in comparison with specialized woodworking machines.

Therefore, not only experienced professionals prefer this tool, but also the owners of farms successfully use the chainsaw for solving everyday tasks in the garden and at the construction site. When building ancillary structures, it may be necessary to saw the log. It is very easy to cut the workpiece into boards in a workshop, but it can be done at home.

Chainsaw cutting technology

Before dissolving a log into planks at home, it is necessary to correctly cut it in order to get the maximum amount of quality planks with a minimum amount of waste. Rational use of raw materials is achieved by using special sawing schemes. The markings are applied to the tree, corresponding to the set goal and the type of planned sawn timber.

Before starting work, you must carefully secure the workpiece in order to achieve a high quality surface of the boards. Sawing of a log is carried out most often horizontally. The advantage of cutting horizontally is that it takes less effort to hold the saw. You can cut the workpiece along the chain saw using the rip sawing devices. a wooden stop. a DIY device.

When using the rip saw attachment, carefully attach it to the body of the chainsaw. Before starting work, you need to take care of creating a base surface, parallel to which the chainsaw will cut.

It is necessary to insert wedges into the longitudinal cut in order to avoid clamping the saw blade with the sawn edge of the board. The saw should move smoothly, you should not press on it with force. It is better to cut the log together, as additional hands are needed to move and secure the workpiece in order to insert wedges into the cut.

Knowing all these subtleties and features, it is easy to independently saw a bar or log into planks.

Sawing logs into planks with a chainsaw

Log sawing tools

The choice of the right tool for sawing a workpiece depends on many criteria. These include:

• workload,
• dimensions of workpieces for cutting,
• the quality and quantity of the required lumber.

To cut a large number of pieces and get a large amount of quality lumber, it is best to use a sawmill. This is a machine for processing wood, the working tool of which is different saws. Designed for longitudinal cutting of logs up to 6 meters long and 20-80 cm in diameter.

At large woodworking enterprises with large volumes of production, specialized mowing lines are used for cutting wood. On the mowing line, you can cut logs of different sizes, while obtaining lumber of exactly the specified size with high-quality surfaces. mowing lines are characterized by high performance.

To obtain a small amount of lumber for the needs of a small farm from logs 2-3 meters long and 30-50 cm in diameter, you can use a chainsaw. You need to know that sharpening chains for rip sawing is different from sharpening for rip sawing.

For longitudinal sawing with your own hands, you can make a wooden stop. a leading ruler that will allow you to cut the log evenly. The stop consists of two wooden boards, one of which is fixed perpendicularly in the middle of the other. The device is screwed to the workpiece with self-tapping screws so that the upper edge of the vertically located board is below the upper edge of the log. The difference between the top edge of the log and the top edge of the board determines the thickness of the slab to be sawn off.

Types of working attachments

If necessary, the workpiece can be cut into boards with a chainsaw using special attachments. The frame for the chainsaw is attached to the tool and is designed to ensure straight-line movement when cutting the workpiece horizontally. The structure consists of:

• a guide frame moving along a surface parallel to which it is necessary to cut a tree;
• a vertical stand on which the mechanism for adjusting the thickness of the product is attached;
• a mechanism for adjusting the thickness, consisting of adjustment knobs and a screw that fixes the desired size;

The ability to set the exact size and correct cutting of the log allows you to get boards of the same thickness and reduce waste. For the first cut in wood, you need a guide frame or a flat, straight plank. Alternatively, you can create a flat base surface using an ax, an electric planer and a level. For subsequent cuts, the flat side of the board, obtained with the previous approach, serves as the base surface.

The chain saw carriage is a type of frame. It attaches to the saw and has additional rollers or wheels that allow the accessory to move more easily over the workpiece. At the same time, resting on the workpiece, the wheels give the rip saw stability, allowing you to cut the log straight into planks.

Such attachments for a chainsaw for longitudinal sawing allow you to cut a log with your own hands without much labor and finance. Carriage types are mini sawmills and portable sawmills.

Safety rules during work

Before you start sawing the workpiece with a chainsaw, you need to take measures to work safely:

• make sure that the attachment is mounted on the chainsaw according to the attached drawing;
• be sure to know the types of chainsaw problems and how to fix them;
• carefully prepare the workplace and the reliability of fastening the workpiece;
• when working, it is imperative to wear overalls, goggles to protect eyes from small sawdust, headphones to protect against noise, a respirator to protect the respiratory system;
• the chainsaw starts on the ground, the chain brake must be unlocked before starting work;
• be sure to have a first aid kit on hand for first aid;

Knowledge and strict adherence to safety rules will allow you to cut the workpiece with a chainsaw without harm to your health and get high-quality lumber.

Drum debarker. gummer

With the help of such a nozzle, it is easy to dissolve the log, it works due to the V-belt transmission. Attaches to belts on both sides using special pulleys. The speed of rotation of the shaft depends on the size of the pulleys, so the performance of the nozzle is easy to change.

This technology forces the master to carefully monitor each stage of the process; some specialists use an assistant during this cut. But this option requires increased security measures.

Cross-cut secrets

The cross saw is used to obtain firewood or decorative elements of the interior. Sawing is carried out according to the following principles:

• Place the log in a horizontal position on wooden supports, the height should be 0.5 m.
• Clean it from the bark.
• Using an ax or a saw, make small marks along the entire length, they should be located at the same distance from each other.
• Make a cut along the cuts.

Cross-cutting does not require the use of special tools or attachments. An ordinary chain is perfect for such work, but its rings must be strong.

The technology of sawing logs into boards with a chainsaw

Sawing with a lightweight nozzle

The method is not very efficient, but it is used quite often. The element is fastened on one side, but the workpieces are slightly uneven. Such materials are necessary for the construction of sheds or fences.

Rip saw attachment

It is used for sawing a log lengthwise, the process takes place in a horizontal position. After work, the master gets the same thickness for the product. The finished materials undergo a drying process, after which the boards are used in construction.

In appearance, the device is a small frame, it is attached to the tire on each side.

Technique for sawing logs along

Longitudinal sawing is carried out using a horizontal nozzle. To get the boards even, it is important to use a specially prepared guide; a metal rail or a high-strength board plays its role.

The difficult thing in this process is to make the first saw cut, for this you need:

• Mount the guide ruler, it consists of two boards fastened together at an angle of 90 degrees.
• Place the log on supports, firmly fix its position.
• Check if the log is level with a level.
• Using self-tapping screws, fasten the guide ruler to the supports.
• In a horizontal position, fix another guide, the element will abut against the ground, but at the same time fix the log.
• Sawing a log.

During the second cut, specialists may not use the leading ruler, the resulting board will serve as a guide. The second cut is made perpendicular to the first.

Features of a homemade sawing option

Sawing a log into boards is easy with a do-it-yourself tool. Equipment manufacturing is simple:

• As a support, it is necessary to use a frame from a school desk or a pipe with a cross-section in the form of a square, its optimal size is 20 × 20, and more is allowed.
• Build two clamps, at one end mount a cross member with two holes for tie bolts, make a projection for the bus in the middle.
• For longitudinal sawing of logs into boards, it is important to make a support frame, its width must be less than the length by 7-8 cm.
• Then two elements 10 cm long are welded to both sides, holes for bolts are made, a handle is attached in the middle for ease of use.
• After that, insert the clamps into the grooves, the bus is installed, everything is carefully fixed.

It is not difficult to work with a homemade tool, this will require two goats, they will serve as a support, and you also need to prepare a metal rail or board, the element will be a guiding element. A log is laid from below, the required height for work is adjusted.

The advantage of sawing logs with a chainsaw

The method of cutting logs with a chainsaw has several advantages.

The ability to work under any conditions. the chainsaw is not afraid of moisture, therefore specialists can saw logs in the rain, the equipment in this case will not deteriorate.

High productivity. it is allowed to carry out woodwork throughout the day, but it must be borne in mind that the power of the apparatus must be at least 7 horsepower.

Autonomous device. the equipment runs on gasoline, does not depend on electricity, the workplace is mounted on any site where it will be more convenient to carry out the process.

Ease of use. the chainsaw is equipped with a smooth start and regulation of the chain rotation speed, these conditions ensure a high-quality result for beginners in this business.

The undoubted advantage is that the equipment is much cheaper than a small sawmill. During a breakdown, repair is inexpensive, does not take much time.