Shoulder strap for grass trimmer with their own hands
How to make a trimmer for grass with your own hands
All owners of homestead plots face the problem of mowing the grass, which grows literally before their eyes, and during the season you need to improve your plot several times. On the replacement of the usual manual scythe has long come benzotrimmer and electric trimmers. But the price for them is not reduced and is quite tangible for many owners of dachas and private houses. Folk craftsmen have still found a way out of this situation and learned to do with their own hands trimmers for grass literally from improvised means, using gasoline and electric tools, not designed for this purpose.
The mower can be assembled with any engine. Most often the homemade is equipped with gasoline and electric motors. Much less often. with batteries, previously removed from old VAZ, GAZ or Moskvich cars.
When choosing a motor, it is important to consider several important criteria:
- capacity. it is best to equip the homemade mower with a gasoline or electric motor with a capacity of 2-4 liters. с. Engines with higher output are suitable for lawnmowers designed for high grass and uneven terrain;
- type of cooling. this factor plays a role in the case when a gasoline engine will be used to assemble the homemade mower. It is best to choose a forced-air-cooled motor. its arrangement is simpler than that of liquid-cooled power units. Besides, air cooled internal combustion engines do not require special care. All that is needed is to clean in time and periodically change the air filter;
- anti-vibration system. its presence only affects the comfort when using the garden equipment. As for efficiency, homemade lawnmowers, both with and without the anti-vibration system, equally successfully cope with mowing vegetation.
Among the additional functions in the device of the motor, it is necessary to allocate a system of soft start. It reduces engine rotation speed when the engine is on, preserving the integrity and extending the life of its main parts.
How to make a chainsaw mower with your own hands?
The easiest variant of making it is a homemade mower on the basis of a chainsaw. Almost everything you need for your lawn mower is already built. The manufacturer is left to complete the device with the missing nodes.
Before you begin assembling a lawn mower from a chainsaw, you will need to study the drawings. During their preparation, it is necessary to specify the dimensions of all the parts to be used and the order in which they are to be installed directly on the mower.
After studying the diagrams, you need to prepare the materials that will be needed during the work:
- Metal angle. necessary for the assembly of a rigid supporting frame;
- steel plate. required for installing and securing the motor;
- 2 pairs of wheels from a garden cart or baby carriage;
- fixing rail or a pair of rotary discs;
- A 5 cm piece of pipe;
- Gear and bearing to connect to the pipe;
- blades of steel blade, which can be removed from a household wood hacksaw;
- bolts, nuts, brackets and other mounting hardware.
Of the tools the designer will need a welder, a drill with a set of drills for metal, as well as an angle grinder with a set of disks of different diameters.
How to properly put on a grass trimmer belt
Working with a trimmer is much more convenient and easier with a special belt. It allows the operator to mow large areas of grass for hours on end without joint and muscle pain. The double shoulder belt is designed so that the lawnmower can be held by the clamps by itself. without using your hands. It will only need to set the direction, and everything else it will do itself. On how to properly attach the belt to the trimmer and adjust it to lighten the load, and we will talk in this material.
Adjusting the hook height
The most important thing is to adjust the belt so that the grass trimmer was at the right level from the ground surface. To do this, you should raise or lower the height of the hook, which is carried out by pulling the shoulder straps until the holder will not be below the hips at 10-15 cm (palm width). While doing this the blade of attached grasshopper must be parallel to the surface, i.e. strictly horizontal.
For your information! If the grass trimmer is attached too high, it will have a very limited grip on the grass.
Grass trimmer backpack belt. purpose
Many trimmer models come standard with a slash belt. But for work, it is best to buy a carrying strap that is specially designed for brushcutters. Thanks to its smart design, it distributes the weight of the device evenly over the entire body. Padded shoulder straps reduce weight and relieve soreness in the forearms. Stiff backrest diffuses the load between the upper and lower back, eliminating the lower back. An impact-resistant thigh guard prevents the trimmer from coming into contact with your foot so it doesn’t rub or transmit vibration. In addition, the belt provides:
- easy transport of the grass trimmer;
- comfortable operation due to ergonomic positioning of the grass trimmer in relation to your body
- Safe working. the shoulder strap prevents the brushcutter from slipping out of your hands if you get a hard object under the blade.
Backpack mower belt with plastic protection
The belt of this model is used for the lawnmower. Thanks to the backpack design it distributes the weight very well over the whole body. Plastic protection will allow you to avoid inconvenience when working with a tool. You can always buy cheap backpack belt for a brushcutter at the online store
The belt of this model is used for lawnmowers. Due to the knapsack design it distributes the weight very well over the whole body. Plastic protection will allow to avoid inconveniences at work with the tool. You can always buy cheap backpack belt for brushcutter at online store spetsinstrument.
Shipping costs for delivery of the goods are paid by the buyer. Delivery is by New Mail. Payment. cash on delivery or cashless payment. You can save money on delivery by paying in advance for the goods by bank transfer. Return of the goods is possible within 14 days from the date of purchase provided that the product has not been used, has not been opened, preserved the trade dress, preserved packaging. For companies and organizations we provide invoices, invoices, tax invoices, VAT certificates. You can buy products with VAT in the store Spetsinstrument by providing registration documents of your company.
Backpack mower belt with plastic protection
38 (050) 336 88 83 38 (067) 326 45 96 38 (073) 169 79 55
Enter new password
Estimated terms of appearance 3 to 7 days
Enter your email address or phone number.We’ll let you know when the item is in stock:
Adjust the height of the grass trimmer backpack strap hook by tightening the shoulder straps so that the grass trimmer blade lowered to the ground is parallel to the property surface (strictly horizontal). When working with the grass trimmer’s saw blade, adjust the height of the hook (by tightening the shoulder straps) so that the grass trimmer’s saw blade is tilted slightly forward relative to the ground surface.
By moving the grass trimmer’s hanging eye to the grass trimmer’s strap forward or backward, balance the grass trimmer so that when the handlebar is released, the grass trimmer blade is near the very surface of the plot, but does not rest on the grass. When cutting shrubs and young trees with the brush cutter blade the grass trimmer must be balanced so that the machine hangs horizontally on the hook when the handlebar is released.
Adjust the grass trimmer shoulder straps (harness straps) so the weight is evenly distributed across your shoulders (check with your hand on the grass trimmer suspension hook).
Husqvarna Grass Trimmer shoulder strap video. About the design features of the belt harness (harness) that make mowing easier and safer with Husqvarna brushcutter, trimmer, petrol mower, brush cutter. wide shoulder straps and elastic waist belt, quick-release locks (carabiners) in case of fire or any other situation requiring quick release from the grass trimmer. About the versatility of belts for men and women.
These Husqvarna knapsack grass trimmer belts (Balance 35/55, Balance X, Balance XT) can be used on all trimmers, gasoline mowers, brushcutters, electric mowers, brushcutters.
A lawn mower is a handy tool for mowing lawns or tall grass, if properly balanced. It’s not about balancing the cutting line or the blades. You need to balance the working handle as well as the position of the petrol mower on the belt. Many gardeners don’t use a belt for petrol mowers, which makes their arms and backs get tired. You have to use a support belt to work comfortably. These belts are included with professional petrol lawnmowers. For Chinese-made petrol mowers the support belt has to be bought additionally.
The position of the lawnmower in relation to the belt
the lawnmower must be properly secured to the belt. The strap is fastened behind the handle to prevent the lawnmower from climbing up when working and to make it easier to cut the grass. If you fasten the belt too close to a full fuel tank, the gasoline grasshopper will go deeper into the ground, and the cutting elements will hit the soil. No cutting attachment is designed to come into contact with the ground. The cutting elements will blunt quickly if the grass trimmer is not positioned correctly. To extend the life of the cutting elements, gardeners raise the lawnmower. This type of work quickly tires the back.
Gasoline grass trimmer must hang loosely on the belt. To balance the machine properly, attach the belt so that the fuel tank is full and the mower unit is in balance. It is also important to find such a position of the gasoline grass trimmer, when working in which, you will not close the exhaust port of the engine, otherwise during long-term work the engine will overheat.
When mowing large areas, it is more correct to use a grasshopper with a straight bar and T-handles that distribute the load on your hands more evenly. Preferably with more engine power.
Working with a gasoline trimmer with T-handles (STIHL)
Many people, especially women, when choosing a trimmer for the grass tend to favor powerful electric trimmers for fear of not being able to cope with the petrol engine start with a hand starter. But as of late, these worries can be put aside. A breakthrough has been made by the American company MTD, who have equipped their mowers with AST (Advanced Starting Technology) engines. It’s not just the well-known solutions. like the integrated decompressor or the injection of an enriched fuel mixture. AST-marked engines have an additional device with a powerful spring, the energy of which helps start the engine without arm strain and even with a slow pull of the starter cord.
Pulling the starter cord to start the lawnmower engine
When buying a grass trimmer, you need to determine in advance exactly what tasks you want to solve with its help. Trimming under bushes, edging lawns and flowerbeds, mowing grass around fences. these all have different requirements. Your physical attributes also influence your choice. The weight of the tool depends on it. whether you want a backpack attachment or whether you can carry the grass trimmer by its weight all the time. And if more than one person will be working with the mower, you need a height adjustment.
Grass trimmer with shoulder straps and different variants of backpack attachments (STIHL)
When comparing different models of trimmers such indicators stand out: power; ease of starting the engine and filing additional fishing line; convenient location of controls.
Efficiency of grass trimmer can be evaluated by such an indicator as the ratio of weight to power. It is desirable to have as much power as possible per unit weight of the tool.
Pay special attention to ergonomic design, so that lawn care is not a hard labor. The more comfortable the grass trimmer handles or handles, the better not only its controllability, but also its safety. The carrying straps take pressure off your hands while you’re working. With a long, separable shaft it’s easy to extend the reach, and if necessary, transport the tool in the trunk of the car.
Working with a trimmer
Manufacturers do not recommend working in sandals or barefoot as this can cause injuries. Clothing and shoes for trimmers should protect feet from injuries.
No special skill is required when working with a trimmer. just hold it correctly by both handles and drive it evenly along the surface.
The line for the trimmer (usually 1.3-1.6 mm) with which grass trimmers are filled. a special. Fishing line for the trimmer is not suitable for this purpose.
Clean the grass trimmer after use. Regularly clean the ventilation slots, trimmer fishing line and reel with a soft brush or dry cloth. Remove dirt from under the blade guard at regular intervals with a blunt object scraper.
Keep the tool in a warm, dry place to protect it from dust and dirt.
Adjust the height of the grass trimmer’s shoulder strap hook so that the grass trimmer blade which is lowered to the ground is parallel to the ground (perfectly horizontal). When working with the blade of the grass trimmer, adjust the height of the hook (by tightening the shoulder straps) so that the grass trimmer’s saw blade is tilted slightly forward relative to the ground.
By moving the grass trimmer’s suspension lug forward or backward, balance the grass trimmer so that when you release the handlebar, the grass trimmer blade is near the very surface of the area, but does not rest on the grass. For sawing shrubs and young trees with the bush saw blade, the grass trimmer must be balanced so that the machine hangs horizontally on the hook when the handlebar is released.
Adjust the shoulder straps of the grass trimmer (harness straps) so that the load is evenly distributed across the shoulders (check by pressing the hook of the grass trimmer by hand).
Husqvarna Grass Trimmer Backpack Belt Video. About harness design features that make mowing with Husqvarna brushcutter, trimmer, petrol saw, brush cutter easier and safer. wide shoulder straps and elastic waist belt, quick release catches (carabiners) in case of fire or any other situation requiring quick release from the grass trimmer. About the versatility of belts for men and women.
These Husqvarna knapsack grass trimmer belts (Balance 35/55, Balance X, Balance XT) can be used on all trimmers, gasoline mowers, brushcutters, electric lawn trimmers, brush cutters.
colleagues, who regularly and repeatedly uses gasoline trimmers, advise how to pick up the length of the shoulder strap and the position of the handle.
I had an electric before, lightweight, mowed and didn’t have to worry about. One problem, I had to watch the wire all the time so I wouldn’t accidentally “mow” it. This year the gearbox of the electric one got jammed. I got a simple gasoline-powered Chinaman. (if anyone is interested, it’s a patriot 3045). With a J-handle. Started to mow. half of the area is tired. Both my hands are always on the line. The right hand is more tired, t.к. I also have to apply more pressure on the throttle. I can’t cut the grass much shorter if I cut the belt shorter. But it turns out that in general I’m holding the trimmer in my hands and weighing it. The belt only saves you from jerks (when you accidentally catch the ground, and the grass trimmer is trying to escape). Twisted.all sorts of things. I can’t find one that’s comfortable. In general, share your tricks on how to properly adjust the length of the belt and the position of the handle.
Nothing can help you now. It’s a grass trimmer. It’s not ergonomic, it’s designed for short work. I’ve tried five different ones. The lower line trimmers have the disadvantages you described. Made a conclusion that the most convenient to use is a lawnmower with a straight shaft (inside) and the handles horns. That’s good weight distribution, decent hand-arm vibrations and larger cutting area. But even with such a mower for grass the next day my shoulder also hurts from the belt, and I’ve noticed that the knee joint of my left leg starts to hurt from the constant rotation of that leg. And there’s a lot of mowing to be done. Either one day from morning to evening, but it is better 2 times half a day. It’s easier on the mower and the health. This year, on Vadim’s advice, I bought a Bosch ARM 34. I’m as happy as an elephant.
I’m learning how to put pictures in. There’s just one thing I don’t understand. Where the width of the picture (800 px). I searched all over Yandex, but could not find the parameters.
Just look for the center of gravity of the grass trimmer. I use an Interskol shrub shearer, originally the belt was attached in the wrong place, the preponderance was to one side, it was necessary to hold with hands. Found the center of gravity, moved the belt there, adjusted the length, and that’s it. Weight is now on my shoulder, I only control it with my hands.
Other variants of self-made mowers
Thanks to the economical and reliable engine, the grass trimmer is also the basis for many other self-made. Below we briefly describe the possible options and give video instructions on their implementation.
Grass trimmer converted to chainsaw
A gasoline brushcutter can also turn into a chainsaw. To implement the rationalization idea, you will need old models of devices. All details will be taken from them. The video below shows the result.
Remaking grass trimmer into a gasoline-powered saw is to install this part from a brushcutter instead of your own engine.
Making a snowmobile for kids
Grass trimmer can also be converted into a snowmobile. The process involves installing the engine on a structure equipped with skis. Due to insufficient power of motors available on brushcutters, the created independent technique is able to carry only a relatively small weight. It also moves on relatively flat terrain. Such a homemade toy will serve as an interesting and useful toy for children.
The snowmobile is driven by a propeller or chain gear.
The videos below show some possible options for homemade machinery:
Homemade craftsmen have invented many different ways to adapt the motor from the grass trimmer on a snowmobile. Here the limitations are related to personal imagination and the available list of unnecessary devices and equipment, which can be used to create homemade snowmobiles.
Mothballs can be converted into a power drill, which will also be used as an ice breaker if necessary. As a result of construction work is accelerated and requires less labor. Motorized drill make excavations for the posts of fences, pile foundations and for the erection of other structures.
Remake for this purpose, both electric and gasoline trimmers for grass.
Except for a bicycle, the engine of a brushcutter is also mounted on a scooter. The principle of assembly is similar to the creation of a motorcycle, only the design features of the scooter are taken into account.
The following video shows an airplane, whose engine is taken from a gasoline grass trimmer.
Having at its disposal an old working and unnecessary trimmer for grass, you can make with your own hands a variety of technical devices, not only those considered above. Your own imagination prompts different variations. But, creating any device, it should be remembered that it would be safe for others and those who use it.
Peculiarities of weeding potatoes with a trimmer
Grass trimmer, or lawnmower, is a device that operates on electricity or gasoline combustion. Its cutting elements are special cutters, trimmer lines or sharp metal blades. Properly organized weeding greatly saves the gardener’s time and physical strength. At the same time, unlike manual weeding, this method of cleaning the beds gives the opportunity to immediately mulch them with the cut grass. Mulch will retain moisture in the soil, attract worms that loosen the soil and improve the fertile layer, becomes an additional fertilizer for potatoes. That’s why supporters of organic agriculture prefer to weed with a trimmer potato plots.
Adjusting the belt
In order to ensure comfortable working conditions, you need to know how to put on the belt-backpack correctly. This process requires a certain amount of skill, but then, after adjusting the backpack to yourself the first time, it will be put on much faster and easier.
Many trimmer models come with a conventional shoulder strap. However, for work it is best to get a backpack strap that is specially designed for brushcutters. Thanks to its smart design, it distributes the weight of the device evenly over the entire body. The padded shoulder straps help relieve the strain and pain in the forearms. Stiff backrest diffuses the load between the upper and lower back, eliminating the lower back. Shock-resistant thigh guard prevents the trimmer from coming into contact with your foot so it doesn’t rub or transmit vibration. The shoulder strap also makes it easier to
- convenient transportation of the grass trimmer;
- Comfort in operation because the grass brushcutter is ergonomically aligned with your body;
- Safe handling. the shoulder strap prevents the brushcutter from slipping out of your hands if you get a hard object in your way.
Strap for grass trimmer with your own hands
Working with a trimmer is much more comfortable and easier with a special belt. It enables the operator to mow large areas of grass for hours on end without pain in the joints and muscles. The two-shoulder belt is designed so that the lawnmower is held in place by itself. without the help of your hands. She only needs to point and everything else she does. On how to properly attach a belt to the trimmer and adjust it to yourself to lighten the load, and we will talk in this material.
Shoulder strap adjustment
To evenly distribute the load on your shoulders and back, you need to adjust the shoulder straps well. To do this you only have to pull up or loosen the straps. they must not dig into your body or hang down. To understand how the weight will be dispersed, you can press with your hands on the hook for hanging the grasshopper.
How to put a belt on Lynx trimmer
Grass trimmer belt How to adjust the grass trimmer belt
Adjust the height of the grass trimmer strap hook tighten the shoulder straps so that the trimmer blade lowered to the ground is parallel to the surface of the section (strictly horizontal). When working with a saw blade, adjust the height of the hook (by raising the shoulder straps) so that the blade of the grass trimmer is slightly tilted forward relative to the ground.
With a movement of your ear, hang the braids on the grass trimmer Forward or backward, trim the grass trimmer so that when you release the handlebar, the grass trimmer is at the surface of the playground, but not resting on the grass. To cut shrubs and young trees with the shrub trimmer, adjust the grass trimmer so that the machine hangs horizontally on the hook when you release the handlebar. Attach.
Adjust the grass trimmers shoulder straps (harnesses) to distribute the load evenly over the shoulders (check by hand by pressing on the grass trimmer hook).
How to put on the grass trimmer belt correctly
The operation of the trimmer is much more comfortable and easier with a special belt. It allows the operator to mow large areas of grass for hours on end without joint and muscle pain. The two-shoulder belt is designed so that the lawnmower is held in place by its own clamps. without the help of your hands. It will only need to set the direction, and everything else it will do itself. On how to attach the belt to the trimmer and adjust it to yourself to lighten the load, and we will talk in this material.
Adjusting the height of the hook
The most important thing is to adjust the belt so that the grass trimmer was at the right level from the ground. To do this, you should raise or lower the height of the hook, which is carried out by pulling the shoulder straps until the holder is 10-15 cm below your hips (palm width). The blade of the attached grass trimmer must be parallel to the ground, which means it must be perfectly horizontal.
Note! If the blade of the grass trimmer is attached too high, it will severely limit the cutting of the grass.
Homemade mower cover
If you make a home-made mower you will definitely need a mower cover. It prevents your eyes, body and legs from getting hurt by small stones and blade fragments if they break.
The cover for the grass trimmer can be made from a sheet of aluminum or thin tin.
- First, in the corner of the square made of metal, you need to drill a hole of the desired diameter (depending on the type of drive of your machine) with a drill bit.
- Then you need to make a marking for the attachment. As the basis, which will be screwed homemade protection, you can use the standard cover from the angle grinder, if you make a trimmer for the grass out of it.
- Clamp the workpiece with a clamp and, using a tape measure and a pencil, draw a first circle with a radius of about 270 mm. The corner of the workpiece will serve as the center of the circle. Concerning the radius one can not give exact recommendations, because it will depend on the diameter of the cutting tool you will use with the machine. Therefore, first decide what kind of knives you will use and what is the optimum line reach.
- Next, make the second arc (this will be the bend), a little back from the first. In this case by 5 centimeters. This is how you measured the height of the future panel. In general, the height of the cowl is recommended to do so that when you put it flat on the ground, the cutting tool will not reach it about 2 cm.
- After marking the second line necessary to cut along it the workpiece, using a jigsaw for metal or an electric jigsaw with a file on metal.
- In addition, you must make radial cuts (up to the first arc) and bend the resulting parts with pliers at an angle of 90 °.
- Next, the shield is attached to the protective hood of the angle grinder, the cutting tool is installed, and the unit is ready to work.
This way you can make and install a protective cover and on trimmer, bought in a store, if the shield for some reason cracked. Shields in the factory units are made of plastic and often break if you accidentally bump the grass trimmer head on the ground to lengthen the fishing line.
Block: 7/8 | characters: 2055
Strap for grass trimmer
For more comfortable work with trimmers, if you intend to treat a large area overgrown grass, it is desirable to use a special belt. This helps relieve fatigue on the arms and back of the mower operator and makes the process much easier when compared to the same job without the strap.
There are shoulder and backpack straps. The shoulder strap is the simplest attachment and consists of a loop with two or one latch (carabiner) by which it is attached to the mowing unit. To the second carabiner is usually attached a plastic plate that protects the operator’s side from the pressure of the grass trimmer boom.
A shoulder strap is usually used with light trimmers, weighing 3-4 kg. A backpack strap is more convenient for heavier machines.
Strap for grass trimmer can easily be ordered online or bought at a specialized store where these devices and accessories are sold.
If there will be a desire to make it with their own hands, then any hostess, after taking a look at this device, it is easy to sew it from handy means (old belts and belts). You may need to buy buckles and carabiners. But still we recommend to buy ready backpack suspension and not to waste time and money on making worse quality than ready-made device.
Block: 8/8 | Number of characters: 1349
Number of blocks: 15 | Total number of characters: 24350Number of donors used: 4Information on each donor: