Sprinking a log along a chainsaw device. Safety precautions

How to cut a log on your own along a chainsaw

Boards and timber are one of the main building materials. But not everyone has financial opportunities for buying ready.made boards. In such situations, one of the outputs is to independently harvest wood on a plot taken in forestry.

You can cut the log using sawmills, benzo or electric saws and additional devices. When choosing one of these tools, the volume of upcoming work should be taken into account. The cost of the cheapest stationary sawmill along with all components is 150 thousand. Chainsaws are much cheaper. It is more convenient for electric saws for the following reasons:

• Electricity is not required to bring the tool. this makes it possible to use a chainsaw on the plots.
• Is more powerful compared to a saw with an electric drive.
• It starts smoothly and allows you to conveniently adjust the speed, which reduces the likelihood of a circuit gap.
• The operation of the inertial brake is faster than that of the electric saw.
• A long time without a break. up to one hour.
• Can be used in conditions of high humidity.

Types of working nozzles

When sawing logs of a chainsaw, various nozzles are used.

• Dry.cutting nozzle. Used to saw the logs along, the process takes place in a horizontal position. After work, the master receives the same thickness from the product. Ready.made materials are subjected to the drying process, after which the boards are used in construction. In appearance, the device is a small frame, it is attached to the bus on each side.
• Drum debarker (fascin). With the help of such a nozzle, it is easy to dissolve the log, it works due to the cuneiform transmission. Attached to belts on both sides, for this special pulleys are used. The speed of rotation of the shaft depends on the size of the pulleys, so the operability of the nozzle is easy to change. This technology forces the master to carefully monitor each stage of the process, some experts use an assistant during this cut. But this option requires increased safety measures.
• Slinging a lightweight nozzle. The method is not highly performance, but is used quite often. The element is mounted on one side, but the blanks are a little uneven. Such materials are necessary for the construction of sheds or fences.

Constructive features of a home.made carriage

The riveted carriage is direct and even guides, according to which the tool is fed to the processed material. To obtain direct cut with specified parameters, the saw is rigidly fixed on a movable platform, which, in fact, is called a carriage. The most common composition of the kit includes:

• guides. Their role is usually played by rails, channel, double. A good solution to the problem is the use of a duralumin ladder;
• a carriage, which is a clan of a trolley moving along the guides. It has a capture or support site for fixing a chainsaw. There are designs in which only the frame is rigidly fixed, and the engine itself only relies on a special stand;
• device for setting up lumber thickness. Changes the height of the rise of the cutting organ of the chainsaw, which allows you to quickly and accurately establish the desired thickness of the sawing;
• The engine feed engine. This element is not required, since large volumes of work on such devices do not perform. In addition, mechanized supply requires the installation of terminal switches and other control equipment. However, many users prefer to install a mechanism to obtain a flat sawing mode that improves the quality of the boards.

There are simpler designs of a carriage, which are a rigidly fixed chainsaw and a restrictive frame. The material is supplied to the moving chain, and the frame calibrates the thickness of the resulting board. This type of carriage is rarely used, since it is extremely difficult to serve heavy logs manually, and the results obtained do not differ in a flat and straight surface. The best option is to feed the tool for a fixed log.

Important! When using this method, a lot of space is not required. the length of the guide carriage should only slightly exceed the size of the workpiece.

Necessary tools

The following tools will be required to make a carriage with your own hands:

• corner grinder with a cutting circle for metal;
• an electric drill or a drilling machine with a set of drills for metal;
• welding inverter with a set of electrodes;
• measuring tools. roulette, ruler, square;
• metal pipes of rectangular or square section;
• sheet metal 3-5 mm thick.

Depending on the complexity of the design of the carriage, other materials may be required. The listed list does not deliberately indicate the material for the guides, since the choice is due to the capabilities of the owner. In addition, for the supply of a carriage, you need special.shaped wheels, which are usually ordered in specialized workshops or purchased in finished form. Most often, it is the trolley that is freely moving along the guides that.

Nozzles for work

How to cut a chainsaw on boards? With the advantages of this method, everything has become clear, and then it is worth noting that the work is carried out using certain nozzles that are suitable for all kinds of works.

There is a nozzle that is used to saw a log along, and it is called quite simply. Dry.cutting nozzle. Naturally, in this case, the entire workflow will take place in a horizontal position. The process of work with such a nozzle guarantees the receipt of boards of the same thickness. Finished materials will have to be dried, after which they can be used for the desired case.

Lightweight nozzle and debarker

Using the longitudinal sawing of the logs, they figured out, and you can go to a lightweight method. It is really very easy to use, since the element is fastened on the one hand. However, this method has lower performance when compared with the first. In addition, the boards will turn out to be somewhat uneven, and therefore they are usually used for secondary buildings.

Another nozzle. This is a drum debrker, or an iconier. The technology of sawing logs on a chainsaw boards involves the use of this nozzle as one of the most suitable material for the dissolution of. It works due to cuneiform transmission. The nozzle is attached to both belts, and for its fixation there are special pulleys in the set. As for the speed of rotation, and therefore performance, it directly depends on the size of these very pulleys. Thanks to this, to change the speed of work in the right direction will not be difficult.

How to cut a log of a chainsaw on the boards correctly? In relation to working with this nozzle, the issue is most relevant, since during its operation it is very important to monitor the progress of work, for which experienced craftsmen can even attract assistants.

Review of some options

We will talk about the two most popular designs that provide the best quality during work, and you yourself will determine which is more convenient and preferable in your case.

Homemade option

First, consider how to make a device for cutting logs of a chainsaw with your own hands.

The work on the work has the following view:

• It is best to use a frame from an old school desk or a square of a square section with a side of 20×20 or a little more.
• First of all, two clamps are made, these are elements with a length of 50-60 cm, on one end of which the crossbar with two holes for the fitting bolts and a small protrusion in the middle for the clamp clamp clasp is welded, the element of the same configuration is attached from above, the photos below are shown ready-made elements, As you can see, everything is quite simple, and having a welding machine at hand, you can make them very quickly.

The clamps should be of such a size that the width of the location of the bolts is slightly larger than the tire height

• To produce longitudinal sawing of a chainsaw log, a support frame is needed, the width of which should be 7-8 centimeters less than the length, two elements 10 cm long perpendicular to two of the sides, they should be slightly larger so that clips come in, they need Install two fixing bolts, a hole is drilled for this and nuts are welded to tighten the fasteners in them, a handle is welded in the middle for the convenience of moving.
• The system is assembled in the following way: first, the clamps are inserted into the grooves, after which the chainsaw tire is inserted and carefully fixed. The distance is selected depending on the thickness of the sawing. To understand how this is done, look at the photo where the design is shown, the price of the issue is several metal elements and renting welding for an hour.

Now let’s tell you how to cut a log onto the boards of a chainsaw using this design:

• You will need two goats that will serve as supports, they should be so height to ensure the convenience of work.
• As a guide, a reliable metal rail or durable board is best suited. You can make this element from the corner or other metal products.
• A log is placed from below, which must be put to the desired height, after which you can start work. After the first passage, the log is raised to the desired height, and the process is repeated.

The work is carried out quite simply, the main thing is to put everything accurately and fix it reliably

Important! Do not forget that a chain for the longitudinal cutting of wooden products should be installed to work on the chainsaw, this will provide high speed and high.quality sawing.

Ready decision

The option Big Mill Timbergzhig is very popular, this is a special kit for mining mines. Slinging logs on a chainsaw boards using this device is simple and effective.

By purchasing this option, you get everything you need, we will talk about how to organize the cutting of logs:

The design is very thought out and is simplicity and reliability

• First you need to connect two durable and even boards among themselves. As a result, you should get a T-shaped design. It will be a stubborn ruler.
• Next, make two r-shaped stops. There are corners that are designed specifically for these purposes in the supply set.
• Roll up the log and place it on comfortable and reliable bars. To its ends with self.tapping screws to attach supports, you should not use nails, since it is much more difficult to remove them later.
• Further, the ruler is attached to the installed wooden supports. This is done through clamps that also come in the kit, while remembering that the cutting fishing line for the cutting is not on the edge of the guide, but 10 millimeters higher.
• Before carrying the cut on the boards of a chainsaw, we recommend lifting one side by about 30 degrees. it will be much more convenient to work like that. Fix this position using two supports, if you do not understand something in the description, look at the photo, everything is shown clearly, in addition, instructions are always included with detailed schemes.

How to dissolve a log onto the boards of a chainsaw? This device allows you to do this easily and quickly

What is required?

A lot of simple and complex devices have been developed for the cut. The choice of one or another tool depends on the required number of the logs of their size.

Когда поднимается вопрос о распиле огромного количества деревянных досок, на ум приходит пилорама. This device is a woodworking machine equipped with several saws, thanks to which the log is subjected to longitudinal cut.

The uniqueness of the sawmill is that it allows you to process logs, the diameter of which reaches 80 cm, and the length is 7 m.

For the cut of the tree, you can use the circular machine equipped with disk saws. In their design, one cutting disk or several. Single.disc circuit circus work with low.quality material. Multi.disc is designed for cutting round.diameters round.

To date, ribbon sawmills are in great demand. They are divided into horizontal and vertical types. The main element of cutting in the structure is the tape canvas stretched onto the pulleys. Ribbon sawmills carry out longitudinal and mixed wood cutting. The entire process of work is accompanied by minimal waste.

Presented types of cutting tools are most often used in the industrial field. However, their analogues in miniature sizes can be found in the country with carpenters and people whose hobbies are associated with the manufacture of decorative products from wood.

In addition to stationary.type equipment, there are many hand tools that allow you to process trees trunks. We are talking about a chainsaw and a nail file with teeth for a longitudinal saw.

Specialists in the field of wood processing for home use recommend a chainsaw. They differ in high power, are able to continuously function for a long time, as they do not need to be connected to the mains. With a chainsaw, you can go to a plot where you can process a huge number of trunks. over, this manual tool has several varieties of nozzles designed for specific sawing options.

• Longing for longitudinal sawing. Intended for horizontal cuts.
• Lightened nozzle. Cannot be called a qualitative element of the chainsaw, since the resulting cut has bumps.
• Ok. This nozzle in a short period of time is able to dissolve the log onto the boards of the required size.

Sawing technology

It may seem to someone that cutting the log onto the boards at home is easier. But this is a wrong judgment, especially when it comes to making building material for the construction of any design.

Before dissolving the log, it is necessary to decide what sizes the lumber should be obtained, and what quality the final boards should have. The choice of a suitable tool depends on these factors.

It is necessary to proceed with the main phase of the dissolution, only by examining the logs. It may be necessary to remove bark and knots from them. If the logs do not have any flaws and defects, the processing process will be much faster, and the final lumber will surpass all the expectations of the master.

To date, there are several types of cutting logs, depending on the orientation of the annual rings of a felled tree.

• Radial. In this case, the cut must be carried out along the radius of annual rings. The finished lumber will meet high quality requirements and even after prolonged operation is not deformed.
• Tangential. This variety involves sawing a log by tangent relative to the annual rings. However, the resulting lumber will not have the desired strength.
• Parallel. The most understandable version of the cutting, which occurs parallel to the fibers of the tree.

When blooming logs in the direction of fibers, it is best to use the option of a round forest. The hump of the round of the round from the 1st side part is originally cut off. Then the log is turned over 180 degrees, and the 2nd horseman falls under the removal.

To make the boards even, the log processed is required to constantly turn over.

Despite the selected method of sawing different logs, it is necessary to adhere to several general rules that correspond to the technology of sawing.

• The log should not move in the process of processing. It should be reliably fixed on the work surface.
• When using a chainsaw, you will need a chain for longitudinal processing so that the cut is even, and the saw does not go sideways. It is very important that the chain is sharpened and does not sag.
• When cutting with your own hands, you should choose copies of small logs.
• Before proceeding to sawing, you should make markings corresponding to the selected type of saw.
• It is important to pay special attention to safety measures at any stage of logging.

To be able to correctly dissolve logs. this is only part of the technology of sawing wood. It is much more difficult to work according to the drawing when it is required to embody a paper pattern into reality. If there is a clear circuit, each part of the cutting passes thorough measurements. Slices lines should be even, which is extremely important in the manufacture of decorative products.

Chainsaw

Before picking up a chainsaw, it is necessary to perform competent cutting logs. Thus, it will be possible to get the maximum number of high.quality boards with a small waste residue.

To begin with, a mark is applied to the tree corresponding to the species of the conceived lumber. Then the log is fixed on the working surface so that it does not move and does not hang out.

Cut the logs should be horizontally. The advantage of this method is the cost of minimal efforts to hold the motorcycle in the hands. For the saw along the log, you will need a device for longitudinal dissolution. Such additions can be bought in a store or do it yourself.

Using the nozzle of the longitudinal cut, it should be tightly attached to the chainsaw body and prepare the basic surface, relative to which the cut will be made. In no case should you put pressure on the saw, it must smoothly move along the work surface. Well, for the convenience of work, it is best to invite a partner. Additional hands will help fix the blanks to insert wedges into the saw.

On the pilram

When working with sawmill, it is important to consider the thickness of the boards, the conical and turn of the raw material material. Make a cut on a tape type sawmill according to several schemes.

• Simple sawing. In this case, the log is subjected to the cut from beginning to end with the receipt of unprocessed boards, since the log is not rotated. This method is considered the simplest, but has several disadvantages. The resulting boards have to be trimmed from the sides, and the lumber itself loses quality. Even during operation, central boards can crack.
• Circular sawing. Cut, after which the sawing man turns the log by the other side. Thus, the tree is processed to its center. This method is considered the best for processing raw materials of medium and higher grade.
• Form sawing. Initially, the cut is done in a circle, and the log of the log takes the type of bar of a particular size, which is subsequently cut without waste residues. This scheme is suitable for cutting low and medium.sized wood.

How to cut a log on your own along a chainsaw

Boards and timber are one of the main building materials. But not everyone has financial opportunities for buying ready.made boards. In such situations, one of the outputs is to independently harvest wood on a plot taken in forestry.

The advantage of the chainsaw as a tool for sawing logs

You can cut the log using sawmills, benzo or electric saws and additional devices. When choosing one of these tools, the volume of upcoming work should be taken into account. The cost of the cheapest stationary sawmill along with all components is 150 thousand. Chainsaws are much cheaper. It is more convenient for electric saws for the following reasons:

• Electricity is not required to bring the tool. this makes it possible to use a chainsaw on the plots.
• Is more powerful compared to a saw with an electric drive.
• It starts smoothly and allows you to conveniently adjust the speed, which reduces the likelihood of a circuit gap.
• The operation of the inertial brake is faster than that of the electric saw.
• A long time without a break. up to one hour.
• Can be used in conditions of high humidity.

Types of working nozzles

When sawing logs of a chainsaw, various nozzles are used.

• Dry.cutting nozzle. Used to saw the logs along, the process takes place in a horizontal position. After work, the master receives the same thickness from the product. Ready.made materials are subjected to the drying process, after which the boards are used in construction. In appearance, the device is a small frame, it is attached to the bus on each side.
• Drum debarker (fascin). With the help of such a nozzle, it is easy to dissolve the log, it works due to the cuneiform transmission. Attached to belts on both sides, for this special pulleys are used. The speed of rotation of the shaft depends on the size of the pulleys, so the operability of the nozzle is easy to change. This technology forces the master to carefully monitor each stage of the process, some experts use an assistant during this cut. But this option requires increased safety measures.
• Slinging a lightweight nozzle. The method is not highly performance, but is used quite often. The element is mounted on one side, but the blanks are a little uneven. Such materials are necessary for the construction of sheds or fences.

Features of sawing using a home.made tool

You can cut a log onto the boards without difficulty using an independent tool. It is easy to make it. To do this, you need to perform the following actions:

• As a support, you need to use a frame from a school desk or a pipe with a section in the form of a square, its optimal size is 20×20, and more is allowed.
• It is necessary to build two clamps, mount the cross member with two holes under the fitting bolts on one end, make a ledge for the tire in the middle.
• For longitudinal sawing of the logs on the boards, you need to make a support frame, its width should be less than seven to eight centimeters.
• Then, two parts ten centimeters long are welded to both sides, holes for bolts are made, a handle is attached in the middle for ease of work.
• Then you need to insert the clamps into the grooves, install the tire, fix everything thoroughly.

It is not difficult to work with a home.made tool, this will require goats, they will serve as a support. In addition, you need to prepare a metal rail or a board for using it as a guide element. A log is laid from below, the required height is set for work.

The procedure for performing preparatory work

To cut the log along, you need to perform the following sequence of actions:

• Take two straight boards and attach one to the other at a right angle. As a result, a strong leading ruler will be obtained.
• To support the manufactured line, you need to make stops from the boards.
• The movement of the trunks must be performed using the tank.
• The log should be placed on a convenient base.
• On the tire of the chainsaw using nuts, you need to fix the frame.
• The supports of the leading ruler must be attached to the ends of the logs, checking the horizontal position by level.
• To fix all brackets and structural elements, you must use screws. Nails for these purposes are not suitable, since it is difficult to extract them in the future without causing damage to the details of the structure.
• The leading ruler must be attached to the supports using brackets and adjust its height, taking into account the fact that the cut will not go along it, but about one centimeter above.
• You need to turn the log and fix the second board so that it rests on the ground and supports the log.

The procedure for performing basic works

• Now you need to start the chainsaw and make the first cut.
• Next, you need to free the log from stops and boards and attach the leading ruler on the cut surface of the log in the direction of the next cut. The line is mounted directly to the surface or to the ends of the log using supports. The second cut is made perpendicular to the first cut.
• You need to turn the log and fix the board point blank to the ground.
• The leading line is not required to perform further actions. As a guide, one of the circumcised sides serves.
• It is necessary to adjust the thickness of the thickness on the frame and saw off the log from the other side in such a way as to get a beam with a bark left only on one side.
• This beam needs to be turned and fixed so that the mounting point of the fixing board is as low as possible.
• Then it is necessary to adjust the frame to the required thickness of the board and saw the beam on the boards.

How to cut a log onto the boards with your own hands and not spoil the materials

Brows and boards are common materials used in the construction of houses. In the absence of funds for finished materials, you can make them yourself using a chainsaw. Before cutting the log onto the boards with your own hands, you should learn more about the features of this process.

The advantage of cutting logs of a chainsaw

The cut on the boards can be carried out using tools such as electric chainsaw and additional devices designed to simplify the work. During the choice of certain products, it is necessary to focus on the volume of the proposed work. Stationary sawmills differ in high cost and are purchased only if it is planned to organize a business to create boards.

The most affordable tool for work is the chainsaw. Such devices have several advantages over electric:

• The chainsaw can be used anywhere, regardless of the availability of the mains;
• The tool is suitable for working in conditions of high humidity;
• Professional chainsaws are significantly superior in power;
• You can use a chainsaw continuously for an hour.

To saw logs on the boards, along with a chainsaw, a special frame is used, which is fixed on the device and allows you to create boards of one thickness. It is also necessary to fix the log in one position. In addition, a guide will be required.

Since domestic gasoline saws are not designed for a large load, for sawing logs it is worth using professional tools. When choosing, you should pay attention to devices with a capacity of more than 7 horsepower. Before operation, the fixed frame is adjusted in accordance with the chosen width of the boards. To create a frame, you can use the legs from school desks or metal corners.

Types of working nozzles

The choice of nozzles for work depends on the volume and type of work on the work. The following devices are used with a chainsaw:

• drum debarker, which is necessary to remove bark from logs;
• lightweight nozzle for sawing logs;
• Standard nozzle used to create boards.

Dry.cutting nozzle

When using such a nozzle, cutting occurs in a horizontal direction. It is fixed on the tire using special clamps and allows you to create boards equal to thickness. After work, the boards are dried, and after that they can be used in the construction.

Lightened nozzle

Such devices are often used, but they should be used only in the case when boards for fences or sheds are created. This is due to the fact that the fastening of the nozzle on the tire occurs only on one side.

Face

The nozzle for removing bark from logs is used due. Attachment occurs with belts. for this special pulleys are used. It is worth noting that the performance of the nozzle can be changed, since the speed of rotation of the shaft depends on the size of the pulleys.

Features of sawing logs when using a chainsaw

Creating additional equipment for sawing logs is quite simple:

• To create a support, a frame is used, which can be created from school desk legs. The most suitable pipes with a square section of 20 × 20 mm are.
• When building a frame, it is necessary to create 2 clamps, and on one end, fix the cross. This element should have holes for solid bolts. In the middle, a ledge is created for the tire.
• In order to cut the log along, it is necessary to construct a support frame, the width of which should be no less than a length of 8 cm.
• For ease of work, the handle should be welded on the frame.
• Before carrying out work, it is necessary to carefully check whether the frame is securely fixed on the tire.

Use a homemade tool is quite simple. Before sawing, it is necessary to install 2 goats. they will be used as a log for logs. In addition, a metal rail or a flat board is prepared, which will serve as a guide element.

The technique of sawing along

The most difficult stage of the process is to make the first saw. For this you need:

• install the leading ruler, which consists of two boards that are fastened to each other at an angle of 90 degrees;
• After that, place the sawn log on the supports and fix it;
• Then it is important to check whether the log is located exactly;
• At the next stage, it is necessary to fix the leading line on the supports using self.tapping screws;
• After that, you can start creating the first saw.

Features of the transverse saw

The transverse cut is used only to create firewood or interior elements. The work is carried out on several principles:

• The log before the work is located in a horizontal position on the supports. The height of its location should be 0.5 m.
• After that, it is necessary to completely clean the log from the bark.
• At the next stage, it is necessary to make on the entire log the marks located from each other at an equal distance.
• Then, on the created marks, you can cut.

Ways to cut logs

Before cutting the workpiece, it is important to reflect on how to achieve a high.quality finished product with a minimum waste. The tree is unequal in quality, the lower region of the rod gives a more expensive timber.

When sawing from a log, you can get such varieties of timber:

• Broke. raw materials, the dimensions of which are more than ten centimeters. The most popular look is a four.dancing beam, in a section of a square. It is used as building materials in the manufacture of furniture headset;
• Board. raw materials, up to ten centimeters thick and width, which exceeds the thickness by 2 times. Boards are made from logs or bars and used in the construction and production of furniture.

Owning the theory of basics and practice, it is possible to make boards and bars yourself.

Advantages of sawing logs of a chainsaw

File and ax, like woodworking inventory, are now gradually gone the past, losing with a sufficiently powerful benzo- and electric pills.

A manual chain saw functions thanks to a two.stroke motor on gasoline, the main component is a sharpened chain.

• Excellent efficiency that greatly simplifies human labor;
• Mobility, it can easily be rearranged in other locations, put in a car, it does not work on an electric network;
• Can be used with an increased level of moisture and even during precipitation;
• The possibility of involving a variety of nozzles for the performance of many tasks;
• Ease of operation;
• Acceptable cost in comparison with special woodworking machines.

Therefore, not only experts with many years of experience prefer this product, but the owners of summer cottages are happy to operate a chainsaw to solve daily problems in the garden and construction.

Vertical nozzle

The simplest nozzle used to get a rough board. A bus with the adapter mounted in its base is attached to the board that guides the guide in the process of sawing. It is clear that such a simple device for sawing a chainsaw log on the board will not be particularly accurate, but you can still get a board, for example, for the fence with it, you can still.

Such a nozzle gives higher accuracy. The device is a rigid frame, which is fixed on the tire of the chainsaw on both sides. at the end of the tool and at its base. The device is suitable for logs of small diameter not exceeding the length of the tire.

The longitudinal sawing of logs with such a device should occur only after the log is well fixed, since if it is vibrated during operation, then it will not work to get the smooth surface of the board.

Before proceeding with the dissolution of the logs, he needs to give a square shape, cutting all the superfluous. It is clear that there will be much more waste in comparison with industrial production. Performing the longitudinal cut of a chainsaw, it is most difficult to saw off the first board. To do this smoothly, you can use a special frame that will serve as a guide and be a base for the stop. The quality of subsequent boards also depend on how smoothly you make the first cut, since the guide will rely on this surface in subsequent cuts.

DIY chainsaw logging

If desired, any such device can be made independently.

The first thing you need. These are goats for fixing logs. Then a frame-handle and guide.

Making goats for logs will not be difficult. The main requirement is their height. Measure the height convenient for you in advance so that you do not have to bend too low to the log or, conversely, work with your hands extended upstairs.

The manufacture of a framework frame will require more knowledge and skills.

First, it is necessary to perform a drawing of the future frame, observing the scale. Then, from a square pipe with a cross section of 20 × 20 millimeters, weld the frame of the future device and weld the clamping elements on it. In the cross member, it is necessary to make several holes for bolt screeds.

Oddly enough, it sounds, but the lack of welding is the most common difficulty in making a device for a tanker with your own hands and other similar devices. Therefore, before starting, calculate whether you have everything you need.

Slinging logs on the boards of a chainsaw: what will be needed for this

Some people have the opportunity to take a certain area for logging in the forest to dissolve the trunks, but as a chainsaw to dissolve the log onto the boards, if you never had to face it? Those who have been engaged in logging for a long time can do this without any devices. it is enough for them to beat off on the trunk a longitudinal fishing line for a trimmer and with its help cut a beam or board.

But if you have never done this, then you will need certain devices that we will talk about now, and also show the thematic video in this article.

Cut the logs onto the boards of the chainsaw on the forested

We dissolve the barrel on the boards

Note. For cutting the barrel on logs, you may need a sawmill or electric or chainsaw with easel devices.

What will be needed for this

The chainsaw is the most affordable tool, in addition, there are a number of reasons:

• Sawing of trunks can be done directly for logging. This does not require any stationary or autonomous power sources, only one tool;
• Compared to an electric saw, gasoline has a much greater power. What is the key moment in the longitudinal dissolution of logs;
• It has a smooth start and soft speed adjustment. This means that the risk of rupture of the chain during operation comes down almost to zero (it, of course, is possible, but for this you need to try very hard);
• Compared to sawmill, the price of a tool operating on gasoline is several orders of magnitude lower;
• Compared to an electric unit, inertial inhibition is much faster here;
• intensive use time allows the operating instructions to stretch up to 1 hour;
• It is possible to carry out work with high humidity (rain, fog)

As we have already said, experienced sawmen can dissolve a log without any devices, but for beginners you will definitely have to purchase or make a machine for fixing a log, a nozzle frame for a saw and guide for a flat cut.

We should not forget that with this work the tool experiences very large loads. Therefore, if you want to do this professionally, then, of course, you will need the corresponding model, that is, as powerful as possible.

Professionals call the most popular and best options, these are Stihl MS-660 or Stihl MS-880. Such units give out more than 7 horsepower, which ensures uninterrupted operation at large loads.

To adjust the thickness of the sawn board, a special steel frame is put on the tire, which can adjust the distance from itself to the tire.

In order to make such a corner, you can buy a square steel tubular profile of 20 × 20 mm, but you can use itching material. For example, duralumin legs from the old school desk are best suited here as possible.

A thick board was used as a guide

As a guide, to do something like a stationary machine, you will need any hard metal, most likely steel, profile, or a thick flat board under the log, as shown in the upper photo. In fact, it looks the same as in the picture. two goats are installed and they put a guide (board or profile) on them.

But at the same time, it should be borne in mind that such a device can only be used for short logs, since if it is increased (the distance depends on the thickness of the guide), then there will be a deflection, which will lead to a different thickness of the manufactured material.

The thickness of the board or cut will be even if any template is used to maintain a chainsaw-a leading ruler or a guide. It is very convenient to use the Swedish machine Big Mill Timbergit, which you see above-it costs about 9-10 thousand.

Here you already decide whether you need such a device, but having spent once, you will get a compact device, which, together with the saw, can be delivered to the site on a motorcycle.

In order to get to work, you will need a two.stroke saw and a tire with two nuts. With this device, you will get the opportunity to dissolve logs up to 60 cm in diameter. Keep in mind that in this situation you will have to get a chain for the longitudinal cut of the barrel, but if you purchase it for some reason, then rewind the usual chain at an angle of 10⁰.

The Big Mill Timbergit has a variety of details that will help to install and fix the wooden guide. It turns out that when the chainsaws are conducted along this guide, the frame glides, and the tire does not go to the side.

Note. Whatever the wood breed you process, in any case the chain is stupid, and in order for your cutting process to occur without problems, it should be periodically tightened.

Gapling of a chainsaw. process

Now let’s see how to cut a log onto the boards of a chainsaw:

• First, we make the guide. we take two even cut wooden boards and fasten them together in the form of a half.tanker;
• Of the pieces of the same boards, we make stops for a semi.tank guide. the fixtures for fasteners are included;
• Roll up the log using the knife and put it on a pre.prepared convenient basis;
• We fix the frame on the tire with nuts;
• After that we fasten the support. which hold the ruler to the ends of the log, checking its horizontal level;
• We fix all the fasteners with self.tapping screws. since the nails at the end of work will be extremely difficult to pull out;
• We check that the fishing line for the cutting trimmer passes not in the ruler, but 10 mm above;
• run the saw and make the first cut;
• We free the log from stops and rearrange the structure to the next cut line so that it turns out perpendicularly (90⁰) to the finished cut;
• Now we turn the log again and fix it with boards to the stop on the ground. the ruler will not come in handy for you, it will be replaced by a previously made cut.