Stihl lawn mower how to replace a cable. The trimmer for the grass Stihl FS 55 does not develop the lawn mower…

Repair of a trimmer for STIHL grass with your own hands and operating instructions FS-38 and 55 (STIHL FS), carburetor adjustment

It is inherent in a person to ennoble the place in which he spends the lion’s share of his time. Residents of cities resort to the services of designers, or they themselves try to change something in their home, buy new furniture, wallpaper, so that, having arrived home after a difficult day, one could mentally relax and relax in a favorable atmosphere. Residents of their own houses behind the city line have completely different worries and demands. It is necessary to download shrubs, grass, various dryness, carefully monitor the state of the personal plot and garden. It is clear that this requires slightly different means of achieving comfort. And then a new brainchild of engineering thought comes to the fore. mowers.

The history of this German brand begins in 1926. At the initial stages of its development, the company was engaged in the production and implementation of various components for washing and steam machines. It all began, like many companies, with a small production and narrow orientation, which made it possible to focus on the quality of the manufactured products.

In the early 30s, the first Stihl chainsaw was released, which is characterized by convenience and functionality in those days. The company is developing at a long time, constantly introducing new tools, which gives it the opportunity to enter the international market. And already in 1931 the first regular supplies of products in STIHL were organized

To date, the company has launched its activities in more than 160 countries of the world, opening new centers and production departments in Switzerland, China and many other states. This is understandable, because the assortment of the company is impressive: motoburs, gasoline sprayers, mowers, gasoline trimmers for grass, chainsaws and much more. I would like to note that Shtil chainsaws are very popular due to their functionality and acceptable price.

Preparation of a trimmer coil for grass for winding

Initially, as a rule, the coil is installed to the head of the device itself. The coil consists of two parts. this is a lid and a spring.

You can buy the highest quality electric ships, trimmers for grass and additional components here in the online store “Garden mechanisms” for the lowest for the selected goods from the category. The directory of the link presents the most popular, demanded electric mowers from world brands such as Bosch, Makita, Patriot, Gardena, Hyundai and others.

• Whatever company you have a trimmer for the grass for preparation are the same for all types. Disassemble the device, or rather, remove the coil from the head of the trimmer for the grass. To do this, we click on the fixers located on the sides of the head of the head, and turn the head clockwise.
• In order to open the mowing head without problems, click on the side latches, if you do not succeed with your hands, use a flat screwdriver to help you. We take out the coil from the head.
• In order to correctly choose a fishing line for a trimmer for your equipment, digital designations must be applied on the inside of the coil, which indicate the thickness and type of permissible fishing line. All designations are indicated, as a rule, in millimeters.
• If you have not found any numbers, then the maximum permissible diameter of the fishing line can be determined by a through hole for lingering the fishing line. The fishing line for the trimmer should go forward and backwardly.

The process of winding the fishing line on the reel

After all the preparatory actions, we need to correctly decide how exactly a fishing line for a trimmer, by turning the cover or in the opposite direction will be washed on your device.

So, let’s say, you figured out how quickly, and most importantly, to correct the fishing line for the trimmer to the trimmer coil for the STIHL grass. All that you have left is to insert everything into the grooves and fix the main cover on the device. Then you can press the bobbin itself and make movements counterclockwise until you feel the emphasis. If you do not feel the emphasis, then most likely you were not corrected for a trimmer for a trimmer and you will have to start everything from scratch.

A couple of tips

If the fishing line for the trimmer was wound correctly, then when pressing the button button, automatic stretching of the cutting element should occur. A trimmer fishing line for your mowing device is one of the most important elements, without which a trimmer for grass can lose all its functional abilities. We can say that a fishing line for a trimmer (cutting element) is the heart of your mowing. Therefore, when buying a fishing line, primarily devote to its quality. When purchasing a fishing line for a trimmer of a particular company, be sure to compare it with the quality of the old fishing line.

What can be used instead of fishing line

Most mowers are interested in others or sellers in specialized stores about what can still be used (replaced) except for the fishing line. Many of them begin to experiment and use unsafe methods, installing different cutting elements on their trimmer for grass, including copper wire, metal, some manage to use strings from guitars and even cables, and someone is completely a fishing line for fishing networks.

• If instead of a special cutting element, say fishing line, install a metal cable, then your trimmer for grass can “turn” into a real dangerous weapon not only for you and your eyes, but also for all people around you nearby. This is due to the fact that during the work of the trimmer for the grass, the steel cable will constantly work, which will lead to confusion, and its small pieces can fly to all sides with a huge speed.
• The same can happen if a copper wire is used instead of a steel cable, but in this case, the pieces of separation from copper wire will be slightly larger and may give you an even greater injury. And if God forbid, accidentally catch such a cutting element by the leg, then after that 100% is guaranteed a deep cut of soft tissues, and in some cases, all this can lead to amputation of small limbs (fingers) of the legs and even hands. Therefore, our advice to you, do not use any other cutting elements, except for fishing line, for your own safety and others.

Causes of breakdowns of the output shaft of a trimmer for grass

To begin with, it is important to understand why the shaft breaks, what are the main causes of this unpleasant incident? Below are the main and most common reasons for which the shaft may become unusable.

• Incorrectly fixed shaft, respectively, the shaft tweezers are not kept all long, because of which the forceps are growing under their own action, and the shaft does not hold at all, or ceases to spin as quickly as before, in this case you need to correctly install the shaft.
• The oil from the gearbox can flow, this is because the large pressure of the solidol squeezed out the bearings, which is why the hot substance flies into the cartridge, in which case the bearings will have to be changed.
• Perhaps something solid hit the knife. So hard that the shaft was damaged, it bent, broke, or damaged the place of fastening.

What tools do we need to replace the shaft of a trimmer for grass, and other elements of this mechanism

In order to get to the shaft, the entire structure is often required, because often the shaft can hide in the tube. In this case, in order to extract and repair, or replace the broken shaft, you will have to remove this very tube, but it will not work to remove the tube, because the knives interfere. So, first of all, you need to unscrew the knives from this design.

After we removed knives, it is worth picking up the protective tube. We picked up the phone, and we see the same shaft in front of us, visually examine it, find out what is wrong with it.

In the event that he simply “licks” will have to be removed, and replace it with the same, or similar in parameters. When replacing it, it is important to check if everything is in order with the shaft mount, with plastic bushings that hold it in the center. If this is full of order, then we simply install a new shaft in place, and twist the structure back.

If the fastening or bushings are broken. They will also have to be replaced. Thus, with a new shaft, a trimmer for the grass will last you for a long time, and will benefit you.

Instructions for users

Any gasoline tool before starting use needs preliminary running.in. At this time, mobile parts are laid to reduce resistance. Since this stage takes place at low speeds, it is easier for a beginner to master such equipment.

Before starting work, you should prepare the mixture. Its parameters and materials used are indicated in the technical documentation for the product. It looks approximately in this way: 2.5 liters of 95th gasoline are mixed with 100 grams of STIHL oil from red packaging. This procedure should be carried out in a container resistant to aggressive fluids. A simple metal canister is not suitable due to rusty areas that cannot be detected inside. Corrosive particles, falling into the carburetor, score it, which leads to the failure of the details.

During the warranty period, the lawn mower needs to maintain and configure the carburetor. It is recommended to do this in an authorized technical center.

Removing the handle

Direct disassembly of the STIHL 180, begins with the removal of the handle, which is attached to the chainsaw housing using three rubber shock absorbers. To remove, it is necessary to remove the plastic plugs from the inner cavity of shock absorbers, after which with the help of a powerful screwdriver, squeeze the upper shock absorber first, then the one which is closer to the posterior handle.

A gas trigger is installed in the back of the handle, which is connected to the carburetor through the wire traction in order to disconnect the thrust from the gas trigger, it is necessary to unwind two screws and disassemble the handle.

When the handle remains on one shock absorber, it is necessary to turn the chainsaw housing from the inside of the handle and breaking to the side, remove the case from the last elastic band.

About the manufacturer Stihl

The history of this German brand begins in 1926. At the initial stages of its development, the company was engaged in the production and implementation of various components for washing and steam machines. It all began, like many companies, with a small production and narrow orientation, which made it possible to focus on the quality of the manufactured products.

In the early 30s, the first Stihl chainsaw was released, which is characterized by convenience and functionality in those days. The company is developing at a long time, constantly introducing new tools, which gives it the opportunity to enter the international market. And already in 1931 the first regular supplies of products in STIHL were organized

To date, the company has launched its activities in more than 160 countries of the world, opening new centers and production departments in Switzerland, China and many other states. This is understandable, because the assortment of the company is impressive: motoburs, gasoline sprayers, mowers, gasoline trimmers for grass, chainsaws and much more. I would like to note that Shtil chainsaws are very popular due to their functionality and acceptable price.

Quick launch of the lawn mower: tips

Some pull the pen with such force that it is necessary to repair the starter of the lawn mowed with their own hands. This is possible only in the case of a gust of a cable or breakdown of the cable handle. In other cases, it is recommended to replace the starter. This node is sold in the collection.

The relatively high price of STIHL products can be scared away by many, but if you think about what is more important. reliability and good result or savings that are in harm with the quality? But, if you set out to save money, we offer you an option for the lawn mower with your own hands, collecting the device with your own efforts you will know all the nuances and the structure of the tool.

Of course, you can choose cheaper Chinese counterparts, but then no one can vouch for the result of the final work and for the life of the service, which is very short.lived among such models. So it is more profitable to purchase a mow from an authoritative company once, which is certainly Stihl, and enjoy stable work for many years of operation.

Replacing the crankshaft oil seals STIHL FS38/44/55

Hi Dear friends! My past post for repairing a chainsaw has collected many questions, many answers and 150 subscribers. I continue to dilute the community of repairs of benzo-instrumentation. In one commentary, they asked to show how to change the oil seals not with a stihl gas station, just I had to repair the Stihl FS55, the instruction is also suitable for Stihl FS38/44.

So, we went, the preface: the lawn mower was brought to this before the upcoming season, she started, worked, and only occasionally there were not big problems with long work, she began to live her life, did not obey the pens of gas, but it soon worked and she worked again.

Carry out that (replacing filters, candles, lubrication of bearings, cleaning, purging, adjustment). show how I will not be done, everyone should know this.

Find a defect that causes “your life” of the lawn mower.

Near the carburetor and under the lids, dust was visible, the carburetor and the inlet tract was completely serviceable. So we will get to the seals. To do this, remove the starter.

Then we unscrew the screws below the braids for the grass that are marked.

Remove the casing of the upper and lower. Next, we take the suitable torx in size, insert it into the clutch drum and twist it, the right carving, that is, the usual.

Next, the clutch pads go, if there is no pneumatic control, then we pinch the flywheel carefully in the vice through wooden spacers, and unscrew the gas key, the right thread is right.

If the flywheel itself does not fly away, then we take the kiyanka and slightly beat it, it is easily removed, from the side of the header, the head of the starter’s ratchet, the right thread, is right.

So we got to the oil seals, visible around them oil with dust, so the seals are missing, the client said to change.

We pull out the old oil seals with a thin screwdriver, we clean everything, we take new oil seals (size 12227.3, these are on China with 26 and 33cm3 braids), lubricate with oil and inside, fill the suitable head.

We collect everything in the reverse order. I launched it, heated, gazed, works like a clock.

Carburetor cleaning and adjustment, gear lubrication 300r

I do not praise Stihl, but I asked how long this braid for the grass has and how much it mows, a braid for herbs is 5-6 years old, in the summer it harvests hay, it mows 3-4 days a week, burns up to 5 tanks with interruptions only for refueling.

Stihl FS 38 lawn mower. problems and solutions

Good morning. Please help me deal with the FS 38 trimmer. I did not get a worker, but a drive shaft does not twist the shank. When analyzing. in the pipe 2 bushings and a drive shaft, on top the shank was fixed by a bolt through the pipe. I read here about some kind of locking ring. I understand that when you press the gas shaft gas, it flies out and does not twist the shank, help me figure it out

Kain81. It is necessary to replace the shank assembly the article 4140-640-1402 costs 300-400r, the stop washer will not help. See that there is no crack on the rod where the shank is attached with a screw and do not forget to lubricate it before installation and every 25 hours of operation by grease for Bigmazzy gearboxes. gap 0.1-0.3 mm from flywheel magnets

Mstil wrote: Bigmazzy, gap 0.1-0.3 mm from flywheel magnets

Kain81 wrote: Good morning. Please help me deal with the FS 38 trimmer. I did not get a worker, but a drive shaft does not twist the shank. When analyzing. in the pipe 2 bushings and a drive shaft, on top the shank was fixed by a bolt through the pipe. I read here about some kind of locking ring. I understand that when you press the gas shaft gas, it flies out and does not twist the shank, help me figure it out

Everything, figured out. The upper part of the pipe was bent and not inserted to the end and did not clamp the screw. Therefore, I poured a drive shaft

Good morning! Experts, tell me what the problem: gasoline stopped entering the so.called “nipple” on the carburetor.clicks lead to nothing.The fuel filter is new when you remove the upper part of the carburetor and press the spring gasoline goes.And most importantly: they climbed into the carburetor, t.He worked for the grass only on the grass, as soon as you press the gas immediately for gas.

Dear forum users!Help with repair please!I’ll start in order: I gave a trimmer for the grass to a neighbor for a day grass on the lawn to mow.There was a complete gas tank.(gasoline he has his own) In 40 minutes he comes: “It works on idle, but how you give a gas stall”.It turned out that he flooded the mixture in which there were 2 times more oil than needed.(instead of 100ml-200ml).But this already became clear later, and before that he climbed the carburetor, dismantled it, wound something and now gasoline does not enter the nipple on the carburetor at all.Knowing people help, otherwise it is far to go to the service, and it is unjustified there is expensive.

SCHAM wrote: He climbed the carburetor, dismantled it, wound something and now gasoline in a nipple on a carburetor does not enter at all.

I have not 38. But I’m trying to suggest. I don’t know if the 38th filter in the tank has a hose, but I don’t know in the carb itself, I didn’t climb.

SCHAM. Watch the hose. Do not pour, or vice versa, is it not damaged, maybe the air sucks. Then he won’t pump either. If everything is fine, I’ll try to contact a specialist at the expense of the carb.

Valerich, thanks!Hose, most likely also in order, t.to if you remove the nipple and gasoline pump, then gasoline is going on.It seems to me that when he disassembled the carburetor, he could damage the gasket (there is a small bend).

Valerich wrote: I’ll try to contact a specialist at a carb.

SCHAM wrote: He climbed the carburetor, dismantled it, wound something

Go, torture him what exactly did with the carburetor. whether he shot which covers opened (if he opened) what he twisted from the screws and how much. So, without this information, nothing can be said at all.

Yes, and be sure to check the exhaust tube on the muffler. is it soot.

Anyway. hand over the braid to a neighbor and let it get in the service. In the end, what a habit of taking other people’s things and poke in them. I took it, did not work properly. give back and say that it doesn’t work. In short, okay, let’s think, we will think. I will not croak for now, maybe everything will cost. I will look out periodically, although I am sitting on a very frail Internet.

Olegych wrote: and indeed. hand over the braid to a neighbor and let him get in the service. In the end, what a habit of taking other people’s things and poke in them.

Stopudovo agrees. Climbed? Now let it take and repair to the state in which he took.

Olegych wrote: and indeed. hand over the braid to a neighbor and let him get in the service. In the end, what a habit of taking other people’s things and poke in them

Yes, he would have done it, but the person helped many times in different situations, and so it will not be very beautiful on my part. says that he removed the upper part, where the nipple, pump, laying and membrane.twisted a screw for supplying fuel, but then put it as it was.

Could confuse the membrane with a gasket. Remove the top cover, lay out the parts in order, take pictures. we will see.

Olegych has already checked, first gasket, then a membrane. I think that it makes sense only to photograph the gasket, t.to there is a small hall on it.

SCHAM wrote: I already checked, first gasket, then a membrane. I think that it makes sense only to photograph the gasket, t.to there is a small hall on it.

You have the whole thing in the piston of the pump, it is in the carburetor. You need to remove the Drosel, carefully! The piston will fly out, protect the spring. Lubricate the piston, and you will not put it to the end, so that the piston does not interfere with walking the shaft of the Drosel. Plant deeply, close the channels.

Sorry that no one could help you)) I was for the first time on the forum)))

SCHAM. If there are questions on the procedure for assembling a carburetor or adjustment, write! I will answer)))

SCHAM wrote: it turned out that he flooded the mixture in which there were 2 times more oil than needed

This is not a problem, the problem can still be as fuel itself. What kind of gasoline, butter? How many days it is already actively (how many days have passed from the preparation of fuel)? People, always fresh fuel! Когда масло попадает в бензин происходит химическая реакция(разложение масла в бензине) и из-за внешних факторов зависит живучесть топлива.

SCHAM. damn) still check before this muffler. Maybe he is clogged? “. if you knock!

Uncle Syoma °. Tell me what gap should be between the rotor and the Stater?

The post “works on idle, but how you give gas stalls”.

Same problem. If with a fully open throttle shuttle to spray in the “drawbar” something like Car Cleaner (engine cleaner)-he pacifies to the full! Even WD 40 passes. It is clear that there is not enough fuel for full power. By analogy with autocarb. the main dosing system does not work. It seems to be the name. This thing is a complete profan, but I would like to figure it out! My engine was lying without movement with 07.2013-Apparently something was cloudy.

Elimination of the malfunctions of the carburetor

The problems of the carburetor, as a rule, consist in clogging nozzles and other elements. For repair, you need to disassemble the knot and clean it. Perhaps an additional adjustment of the carburetor will be required.

You can clean nozzles and fuel channels using a pump or compressor. For adjustment, 3 screws are usually used:

We recommend reading:

Trimmer for the grass gasoline: choosing advice, overview of the best models, types and options for using trimmers (120 photos)

• Completely tighten the screws h and l.
• Unscrew the screws h and l by 1 turnover, accuracy plays a significant role.
• Run the lawn mower and leave in working condition for 10 minutes to warm up the engine.
• When the engine warms up, unscrew the gas to the full.
• Let go of the gas handle and configure idle (LA). Twist the screw after the rotation of the working body so that it stops.

The proportion of gasoline and oil for a trimmer for grass

In order to correctly dilute oil with gasoline for the preparation of the fuel mixture for a trimmer for grass, always follow the recommendations on the container from the oil. Most often this proportion is 1:50. For the preparation of the mixture, any quality oil for 2-stroke engines is suitable.

The first launch of the lawn mower will require you to be particularly attentive and caution. This is not a matter of a new tool or you put it into operation after prolonged downtime, compliance with simple first launch rules will help you avoid damage to the device.

Review: Stihl fs 38 benzotrimmer. Review for 9 years of use of flexible shaft replacement.

I already wrote about one assistant in the fight against grass on the site. Elitech K4000b gasoline. But for a long time and its appearance on the farm, this benzotrimmer (or a lawn mower) was acquired).

In the STIHL motorcycle family, this is the youngest and lightest model. It has a bent bar. The kit includes a trimmer head and a head with plastic knives. There were two sets of knives themselves three. After time, the knives have not been preserved and as practice has shown. They are useless. The main working kit. Trimmer head and plastic cord (fishing line for trimmer).

The instructions indicate the diameter of the cord 2 mm, but again, from the practice of operation, the cord with a diameter of 2.4 mm shows itself better. It is also mowed longer in the drum, but it lasts longer and mows better.

Two.stroke engine of course. It feeds on 92th gasoline mixed with butter in a standard “Stilevskaya” proportion of 1:50. There are no complaints about the engine, even the spark plug is still “native”. True, recently after starting, “Unshelt” is required to develop working turnover.

This baby works is mercilessly for us. Not only young herbal growth, but also grass to the waist. And even higher. Participates in the cleaning of the Siderates (oats and so on).

At the end of last season, I noticed increased vibration and extraneous noise in the barbell area. And in August of this year, this noise came out. burst a flexible drive shaft.

The procedure for replacing the flexible shaft is quite uncomplicated and is presented in the attached video.

To extract the shaft itself and the plastic guide, which also became unusable, it is required to dismantle the protective casing and a bearing node. Then we act according to this photo. Weaken 1-4 and twist the screw fixing the bar.

After extracting the old guide, we install a new.

We collect everything in the reverse sequence, not forgetting to grease the flexible shaft and bearing itself.

After replacing, as expected, vibration and noise disappeared. The trimmer for the grass has become almost like new.

In the photo you can notice a blue sealant on a gas tank. He struck himself. The leak is eliminated by car sealant, the third year is normal flight.

The unit in a cold garage is stored. “Service service” of course does not receive. But nevertheless, the ninth season is already happy with his work.

Bought from an official dealer, made in China.

When working, do not forget about PPE. Without protective glasses, gloves and strong working boots/boots, it is better not to take it in your hands.

Carburetor, muffler and ignition coil

To remove the carburetor, you must have a 8.head and extension cord, with which it is convenient to spin the nuts of the carburetor and air filter mounting. Before dismantling the carburetor, it is necessary to disconnect the ignition wire and the craving of the air damper from the engine control lever and remove the lever, only after that the air filter and the carburetor are removed.

The stihl 180 muffler is attached with two nuts, promoting which you need to pull it over, it will easily withdraw.

Trammers for grass professional and light

It is sometimes impossible to make a choice in favor of a device without elementary information on the main technical parameters of equipment that interested the user.

It will be advisable to compare these two categories of devices, choosing two from a number of models, on an example of which you can trace all their similarities and differences. The most popular model from the group of low.power gasoline trimmers STIHL is FS 55.

The devices that are popular due to optimal power and performance and used for processing large areas include FS 250. The main differences characterizing these two units are laid down in the constructive features of the engines.

So, in a household trimmer for grass FS 55, an improved type 2 MIX, which ensures a decrease in harmful exhausts and increases the efficiency of fuel consumption, is equipped with a direct drive shaft. The engine is working on the oil bosinzin mixture.

The engine power of this model is 1 liter. With., and volume. 27 cubic meters. cm, which allows you to successfully use it not only in the garden, but also on small lawns.

The duration of the average working session of this device is 2-3 hours of work in an area of ​​up to 6 acres.

This is also facilitated by a tank for fuel with a volume of 0.33 liters.

The FS 250 device is equipped with a 2.15 liter with the previous model with a gasoline two.stroke 2 MIX engine. With. and with a volume of 40 cubic meters. cm.

The hard shaft and the piston group persistent to wear and significant loads allow the use of the unit in territories with an area of ​​up to 20-25 acres for 6 hours of continuous operation.

Fuel container contains 0.64 l of fuel. The trimmer for the grass copes with advanced vegetation in any climatic conditions.

Most often, equipment of this type is trusted by complex communal work on the improvement of the territories of city parks and forest parking zones.

The similarity of the engines of these models is the presence of a smooth starting system Elastostart. This allows you to minimize uncomfortable jerk.shaped movements at starting, loading the muscles of the hands and back of the user.

The presence of the fuel pump for the trimmers in question provides the ability to pump fuel to the carburetor manually, which greatly facilitates the launch of the engine after a long break in operation.

The ergostrat mechanism, which is equipped with the FS 55 model, is responsible for the light and quick start of the engine thanks to the spiral spring in the design of the starting device.

The FS 250 unit is equipped with an anti.vibrational STIHL system, using special rubber linings of the extinguishing harsh shocks and fluctuations that occur during operation.

Due to this, the high efficiency of the operator’s long.term work is achieved without the sensations of fatigue and stress. Also, the structural features of the described trimmer for a professional class grass include a special regulatory authority. a compensator.

It prevents the saturation of the fuel mixture when filter pollution by harmful substances, providing a long.term period of operation. The surface of the filter surface is required to reach the level of pollution in 80 %.

Both of the under consideration trimmers are not inferior to each other in terms of convenience of use. The multifunctional handle present in the models is equipped with all the necessary controls, which gives the operation an operational and effective move.

Attention! The handle here is T-shaped, double, providing maximum maneuverability and adjustability. It is this type of handle that is optimal for frequent mowing of grass in vast territories.

Equipment component by practical shoulder diluted belts with soft pads allows the operator to work for a long time without fatigue. These belts are also equipped with a convenient carrying system.

If necessary, it is possible to use portable belts with a tool bag and the mechanism of quick removal and fixing the trimmer for grass. All STIHL technique is necessarily equipped with special glasses that ensure the safety of the operator during operation.

The described trimmers for the grass are close and in their overall indicators. So, the STIHL FS 55 model has a length of 172 cm without equipment, and the FS 250 device is 177 cm. Without tools, the weight of a light model is 5 kg, professional. 6.3 kg.

Both units have a straight bar, cutting head Autocut 25-2, the ability to equip a GSB 230-2 with a two-blade knife and fishing line. The width of the herbs mowing is, respectively, 30 and 45 cm.

Photo of a benzosos

The equipment described above must be used by wearing special clothes and using equipment. Clothing should not interfere at work. You should choose the one that adjacent to the body. It is necessary to exclude wide sleeves that could catch on shrubs, wood or mobile details of the unit.

It is important to take off ties and shai. This also applies to jewelry. Before starting the Stihl FS 55 lawn mower, you must wear protective boots that have a rough sole. It is important to use a special protective helmet and glasses that exclude damage to the organs of vision.