Reviews of popular models of garden equipment ~ lawn mowers, trimmers, brush cutters, mowers ~ CHAIKA.NET Tips and solutions to possible problems during operation
How does the work of a puncher begin? Punch adapters and extensions have different characteristics: power, length, etc. After installing the necessary attachment on the tool, you can start directly to work. After connecting the punch to the power supply, you must make sure that the mode switch is in the desired position. Then you need to let the tool […]
Read more
How to make pens? DIY vibrating screed diagram The engine frame is ready, the engine is rigidly fixed to it. The concrete compaction strip can be considered ready for use. But working with it will not be very convenient for now: you need control knobs. First, you need to weld (or screw) two square pieces of steel in a vertical […]
Read more
Perforator When using a hammer drill or impact drill, they must be switched to impact mode, a working tool with a victorious tip is inserted and it must be directed perpendicular to the wall surface. If the holes are drilled for a long time, then periodically it is necessary to wet the drill so that it does not overheat too […]
Read more
Basic rules for working with a hammer drill in jackhammer mode Even an inexperienced master can hammer the concrete surface with a perforator. To do this, it is necessary to put the tool in the jackhammer mode. A special nozzle in the form of a lance or a blade is inserted into the cartridge. The hammer drill must be firmly […]
Read more
Resuscitation and care rules, protection against overheating If a diamond core bit for concrete has ceased to perform its functions normally, first of all, it is advisable to find out the causes of the malfunction. To extend the time between repairs and significantly increase the service life, the masters recommend doing everything in strict accordance with the rules specified in […]
Read more
Ways to drill a concrete wall with a drill When preparing for renovations in the house, you need to be prepared for the fact that you will have to drill the walls. For example, to fix a profile for drywall sheets. At this stage, some difficulties usually arise, since in many houses the walls are made of concrete. In addition […]
Read more
Wood screws Some objects are attached to concrete walls with screws. They also need holes. They can also be inserted into wooden corks. But there is another way. the holes are filled with alabaster or cement, and a wire is screwed onto the screw thread. New world record: 80 punches in 13 seconds!!! How to make a chopik? The question […]
Read more
Is it possible to exclude dust? How to work with a dust-free rock drill? The duration of its operation depends on the professional care of the hammer drill. Particular attention should be paid to the lubrication of the gearbox when working with concrete, because in this case dust is most formed. You can protect yourself from it with a vacuum […]
Read more
We drill concrete walls: tools, technology, safety Do-it-yourself concrete drilling is hard, noisy, dusty and at the same time delicate and responsible work. Why thin? First, due to the high risk of injury. Secondly, drilling of building structures can reduce their strength and damage communications in the walls, and this is material damage. Third, the walls are often drilled through […]
Read more
Hole drilling The user needs to know how to properly drill a concrete wall. The tool with the installed drill or drill is installed against the previously marked wall. The equipment is held by the main handle with the right hand, the left hand is holding the drill body. The drill rests against the surface of the wall, then the […]
Read more