Reviews of popular models of garden equipment ~ lawn mowers, trimmers, brush cutters, mowers ~ CHAIKA.NET Tips and solutions to possible problems during operation
How to properly cut metal with an oxygen-propane cutter? Compared to gas welding, gas cutting requires much less skill from a person. Therefore, mastering a gas torch is not that difficult. It is enough to understand how to do it correctly. The most widespread in our time are propane cutters. They use propane and oxygen together, since their mixture gives […]
Read more
Special nozzle “Cricket” for a drill for cutting metal Cricket nozzle. The Cricket device is a nibbler that is capable of making a straight cut. The tool is used to cut not only smooth, but also profiled metal sheets. In addition to metal, they can cut plastic and polycarbonate. Cricket is used for cutting thin sheet products: The maximum thickness […]
Read more
Watch DIABLO Blades Cut Through My Steel Like Butter, “CRAZY FAST” Steel beaver attachment The device is designed for cutting flat and profiled sheets (corrugated board, metal tiles). It has a cutting mechanism that works similar to the processing of materials with a nibbler. In the process of metal processing using the “Steel Beaver” tool, sparks are not formed and […]
Read more
Tool features “Circular” is a type of circular saws. It is used for cutting metal sheets, rods, pipes, fittings. Powered by an electric motor. The tool is submersible, that is, it cuts metal not only from the edge of the material, but from an arbitrary point. The design of the product is such that it is easily disassembled when replacement […]
Read more
How to sharpen different drills? According to experts, one should start an independent practice of sharpening drills with cutting products with a diameter of more than 10 mm. The sharpening angle for such elements is 120 degrees. After the procedure, the front of the drill should be symmetrical. If an error occurs during sharpening, it can be corrected immediately. At […]
Read more
The principle of the tape mechanism A band sawmill is a machine that cuts logs longitudinally. Thanks to the ability to precisely adjust the position of the cutting surface, it is possible to produce lumber of various thicknesses. The sawmill design consists of the following main elements: Band saw. Clamping mechanism. Frame movement mechanism. Web height adjustment devices. An electric […]
Read more
Mechanical methods The classification of mechanical cutting methods is usually based on the answer to the question: how to cut metal? Cutting with a hacksaw and scissors for metal Cutting with scissors: a) cutting the sheet into strips; b) cutting with leaf cutters.Cutting a round shape: c) wrong; d) correct At home, metal is usually cut with an ordinary hacksaw. […]
Read more
Wire type The bristles of a roughing brush are of several types: from straight, twisted, or corrugated wire.Twisted wire affects the surface harder than others and has the greatest resource. it retains the shape of the brush longer, breaks less. The twisted wire in the process of work gradually unwinds freeing the bristles for work. Further, according to the degree […]
Read more
What circles are allowed to use? Each type of processed material has its own abrasive tool. It is not allowed to use circles that are not suitable for the corresponding type of operation. Diagram of an angle angle grinder. Under no circumstances should large discs be mounted on an angle grinder if they are not intended for this tool. Small-sized […]
Read more
Pereosnastka.ru Wood and metal processing A hand-held hacksaw (saw) is a tool designed for cutting thick sheets of strip, round and profile metal, as well as for cutting slots, groins, trimming and cutting out workpieces along the contour and other works. The hand-held locksaw consists of a machine (frame) and a hacksaw blade. At one end of the frame there […]
Read more