Reviews of popular models of garden equipment ~ lawn mowers, trimmers, brush cutters, mowers ~ CHAIKA.NET Tips and solutions to possible problems during operation
Trapeziidal running thread for metal.cutting taps and Lerok Carpet for cutting the trapezoidal thread is shown in the rice. 200. The angle between the side cutting of the cutter should be 30 °; The length t of the front edge is taken according to the profile of the chopped thread. All angles (α, α1, α2) are selected in the same […]
Read more
Grass trimmer reel repair with their own hands: how to remove, disassemble, change the line for the trimmer, assemble and install back If the trimmer line is not extended by lightly striking the grass trimmer reel button on the ground, the prerequisites for this are usually. Option 1 is overbite, t.Е. Clamping cord between turns. This problem usually occurs if […]
Read morePrecautions Do not use a drill or other mechanical tools for tapping. An exception is the universal drilling machine, whose rotation is adjustable up to 0.3 per second, and which also has a reversing function (reverse rotation). A simple drill can be damaged, and so can the tap itself. Do not deviate from the vertical and perpendicular position when drilling, […]
Read more
All about threading pipes: 4 turner secrets The detachable connection of metal pipes in a home plumbing, sewer system is made by threading. Inch pipe threads are performed on pipe ends and fittings. The diameter of its threading is determined by the size of inches, or their fractions, where the characteristic value. the number of turns made by the number […]
Read more
Screw-cutting lathe model 16К20 Universal screw-turning machine model 16К20 is designed for carrying out various turning and thread-cutting operations. The machine is capable of tapping threads of various profiles on inside and outside cylindrical and conical surfaces using chisels, taps and dies. The machine uses main motion chain and threading chain when threading with chisel and die, and only main […]
Read more
Threading techniques The technique of threading on pipe blanks involves the use of the following techniques: Use of specialized threaded combs and cutters; thread rolling using round (flat) dies; preparation of the connection of the thread type using “traditional” taps and dies; Threading with specialized cutters. Similarly, the preparation of connections with threading at home is likely only with the […]
Read more
Instructions for tapping with a die Cutter is a metal disc with a round petal hole in the center. Blades have cutting edges that cut threads of a specific size and shape. Dies are made of metal with a higher hardness than the pipe material. It is high speed steel or alloy steel. Preparing pipe. Cleaning off dirt, degreasing surface. […]
Read more
I use a pipe threader or a clip to cut the threads on the pipe. For threading a pipe with a diameter of 15 (aka 1/2″, aka half-inch), I usually use a lerk in a lerk holder, which I put on the prepared cut of the pipe, the side that has the edge, due to its length it serves as […]
Read more
How can external thread be cut? The external thread is cut by hand using special tools. dies. They are subdivided into round (lerki), which are made in one piece or split, and sliding. One-piece dies can only cut external threads of one diameter. How to thread a pipe next to a wall? In order to cut a thread on a […]
Read moreHow to thread 3 4? From the information given above, it can be stated that threading on a pipe is not a difficult process and is quite doable at home. The main thing is to choose the right device and all the elements for it, while the process of how to cut a thread on a pipe will not take […]
Read more