Reviews of popular models of garden equipment ~ lawn mowers, trimmers, brush cutters, mowers ~ CHAIKA.NET Tips and solutions to possible problems during operation
What is Detergent Oil? Air Cooled Four Stroke Engine Oil Special grease developed for diesel or gasoline walk-behind tractor. The composition is made on the basis of synthetic polyalphaolefin components with the addition of modifying additives. What gasoline needs to be poured into a uniaxial tractor? For motoblocks, gasoline up to 92 octane is used. When mixing, the tank is […]
Read more
Adjusting the valves of the walk-behind tractor petrol Honda engine. Of course, use the same method when adjusting the valves on the Ural and Centaur units. How to set up on the Agro walk-behind tractor The valves on the Agro walk-behind tractor are adjusted as follows: We warm up the engine, after which we give it some time to cool […]
Read more
Saber cutter and its assembly Before assembling cutters on a uniaxial tractor, you need to understand well the concept of a motor cultivator. This is a welded frame made of pipes with a diameter of at least 23 mm with a fuel tank and an engine installed on it. They are fixed to the frame with brackets. The engine is […]
Read more
Do-it-yourself breakdown elimination Earlier, we examined why the cultivator does not start, and what are the reasons for the absence of a spark in the walk-behind tractor. Next, you should consider the moment with self-elimination of the following series of defects: there is no spark (the problem lies in the candle, breakdown of the ignition coil, in any case, you […]
Read more
Setting up the plow before starting plowing When starting plowing work, it is necessary to correctly adjust and adjust the position of the plow relative to the ground. This procedure is carried out in several stages: before the start of plowing and during the plowing of the first track. We offer you to watch a video, where it is described […]
Read more
Engine intermittent, stalls Pops into the muffler I decided to fix something to slow down when I did it I decided to start it and that’s what happened.) I was just If the speed is floating on the walk-behind tractor and shoots into the exhaust If the revolutions float on the walk-behind tractor and shoots at the exhaust solution to […]
Read more
Changing the oil in the gearbox Any gear oil is used to lubricate the gearbox, for example, TAD-17, TAP-15V or with other markings in accordance with GOST 23652-79. Before filling it, check for the presence of old fluid. If necessary, it must be changed, having previously checked the volume of the tank. Checking in such models of a walk-behind tractor […]
Read more
What engine can be put on the “Mole” cultivator: replacement options Motor-cultivators “Krot” are popular among owners of small land plots. This inexpensive and reliable technique has a simple design that many farmers make adjustments to. Among the improvements made is the replacement of the engine with a more powerful analogue. Introduction: For a long time, the mole cultivator has […]
Read more
What to do if the engine of the walk-behind tractor does not start well when hot? If a single-axle tractor does not develop a hot speed, the fault diagnosis is carried out in the following sequence: after several unsuccessful start-up attempts, examine the candle as described above. If possible, it is better to immediately replace it with a new one […]
Read more
Preparatory stage: where to get the drawing You need to choose a specific, clear and understandable scheme for assembling your earth-moving machine. There shouldn’t be any difficulties with the choice. Can be used: Scaled-down factory diagrams of large excavators of the “Belarus” type. Ready-made drawings from the Internet, posted by craftsmen. Interesting working options can be found not only in […]
Read more