The correct launch of the Oleo-Mac lawn mower.

The best assistant for a personal plot is a trimmer for the grass “Oleo-Mac Sparta

Repair of the starter of a gasoline trimmer for grass may be required at the most inopportune moment. In this case, you can solve the problem in two ways: replace the broken part or change the entire node. The latter option will cost more. To repair the device with your own hands in most cases, you need only a screwdriver with an appropriate tip from the tools. Repair work will not take much time and do not require special knowledge. It is enough to know the device, the principle of operation, the nuances of the assembly-disassembly of the starter on the trimmer in order to achieve the desired positive result.

The device and principle of operation of the starter on the trimmer

The gasoline engine is, in principle, the main part of the motorcycles its power lies in the range of 0.5-2.5 liters.With. The movement from it is transmitted by the shaft located inside the hollow bar, and then through the gearbox, consisting of gears, already a fishing line or a knife (working body).

Also, the lawn mower has the following elements:

  • protective casing;
  • lever;
  • a belt designed for ease of use of the device;
  • Starter serving for launching a gasoline internal combustion engine.

All parts of the motorcycles are presented in the photo further.

The starter on the trimmer is an integral part, which performs the engine starting into operation. It is shown separately in two photos below.

The starter mechanisms of various models of the benzos work according to the same principle: during the launch of the ICE, the protrusions marked in the photograph above the number 1 are included in the hook with dogs 3. When the engine begins to work, they return to their previous position due to the effects of centrifugal. Similar role is also played by wires 2.

The process of returning to the initial position of the elements of the mechanism occurs due to the presence of a spring screwed around the axis. It unfolds when the rope is pulled. After releasing the cord, it is drawn and winding due to folding the spring. During the launch of the ICE of the lawn mower, the triggering mechanism turns its shaft until it starts to work (starts).

To date, gasoline motorcycles are equipped with two types of starter mechanisms:

The first option is much more common.

The starter on the trimmer can function without breakdowns for a long time. It is impossible to unambiguously indicate the deadline. Everything is determined by the initial quality of the device and compliance with the rules of handling it.

The Oleo-Mac Sparta 250s lawn mower is not started

The overall adjustment of the maximum revolutions, engine power, temperature and gas consumption depends on the left screw (H). Spare parts for Motokos OLEO-MAC Lawn mowing Oleo-Mac Sparta 250s carburetor repair.

Adjustment of the lawn mower carburetor can be adjusted with your own hands, as well as the entire bench tool for the garden, is not difficult to maintain equipment. Repair, configure without the help of others there is an option and it is necessary. For example, adjusting the carburetor of the lawn mower on their own. it is 5 minutes. In general, the essence of the problem of the Oleo-Mac Sparta 37 is that after cleaning the silencer, the braid braid stopped gaining momentum.

Oleo-Mac Sparta 44 Examination adjustment

Simply put, adjusting the carburetor on a benzocos. creating an optimal fuel mixture due to the correct air supply. This happens when, instead of normal repair, the “symptoms” are muffled by setting a carburetor.

Adjustment of the lawn mower carburetor can be adjusted with your own hands, like the entire benzo tool for the garden, is not difficult to maintain equipment. Repair, configure without the help of others you can and necessary. For example, adjusting the carburetor of the lawn mower with your own hands. it is 5 minutes. Spare parts for motorcycle. Repair and adjustment of the carburetor motorcosa.

Instructions

Before starting work, the device must be checked and prepared.

Important! Any error during assembly or refueling with low.quality fuel can lead to a malfunction of the chainsaw. Due to the large weight, it is recommended to hold the saw with both hands

Also, do not forget that when working you need to wear special protective clothes, helmet and glasses

Due to the large weight, it is recommended to hold the saw with both hands. Also, do not forget that when working you need to wear special protective clothes, helmet and glasses.

  • Before starting work, you need to check the correct installation of all elements (cutting headset).
  • After you need to add fuel and oil lubrication oil.
  • During the launch of the chainsaw, be sure to keep it correctly.
  • During work, strictly observe all safety measures.

In the guide to the OLEO-MAC 936 chainsaw there is also a repair instruction that will help when searching and eliminating faults with your own hands. From elementary replacement of the tire to complex and accurate adjustment of the carburetor.

The launch and work of the chainsaw of the Italian brand Oleo-MAC Models 936 are presented in the next video.

OLEO-MAC 947 chainsaw-model characteristics

The pluses of this semi.professional portable saw include a slight level of vibration, a low.established center of gravity and high performance during operation in any weather conditions.

The ICE piston of this model is made of forged steel and equipped with two rings to increase the stability of the element.

The saw organs of this semi-professional model of the OLEO-MAC brand consist of a forged chain installed on a metal guide tire. The lubricant of the headset is automatic and is carried out under the control of the adjustable oil pump.

  • The power of the factory engine is 3.1 liters. With.;
  • Tank capacity for fuel/lubrication of the chain. 500/270 ml;
  • The brand recommended by the length of the mounted tire is 45 cm;
  • Weight. 5.6 kg.

The internal components of this OLEO-MAC model are placed in a shock-resistant case, withstanding prolonged heating, vibration and falling from a height.

Popular models

When choosing an Oleo-Mac lawn mower, you should focus on the area of ​​the site.

Electric equipment is ideal for pumping lawns with an area of ​​not more than 800 m2, you can take compact options with a decree made of steel or plastic.

This technique is maneuverable, convenient to use. Among the current models, non.self.propelled options can be distinguished.

  • Oleo-Mak K 35 P. Non-self-propelled mower with a width of a mowing 33 cm and adjusting the height of the haircut at 3 levels-at 20-36-52 mm. The model is designed to process an area of ​​up to 300 m2, has an 1100 W engine, is equipped with a folding handle and a grass collector in the kit. Light plastic case is not afraid of mechanical damage.
correct, launch, oleo-mac, lawn, mower
  • Oleo-Mac K40 p. Light and maneuverable non.self.propelled lawn mower with a soft grass collector at 40 liters and a folding handle. The model has a built.in an electric motor for 1300 watts, a width of a mowing 38 cm, suitable for caring for lawns with an area of ​​up to 550 m2. Good choice for a private house with a lawn.
  • Oleo-Mac G 44pe Comfort Plus. Technique with a durable steel deck and a 1500 W engine is equipped with a voluminous hard grass collector for 60 liters of waste. The handle in the model allows you to adjust the position for the convenience of the operator, rolls an area of ​​up to 800 m2, there is an adjustment of the height of the cut in the range of 28-75 mm. This is the best option for a small suburban estate.

An overview of self-propelled models of lawn mowers with a gasoline engine should start with the semi-professional model Oleo-Max Max 53 TBX Allroad Aluminium with a lightweight case and a special wheelbase for the most complex areas with large height drops, uneven relief.

This model is able to cope with work on an area of ​​up to 2400 m2, has a knife width of 51 cm, gains speed up to 3.6 km/h.

The Reliable American Briggs Stratton Motor has includes 80 liters of a mulching element with a plug. Among other lawn mowers with a gasoline engine, the following models can be noted.

  • Oleo-Mac G 53 PK Comfort SD. Non.self.propelled lawn mower designed to process an area of ​​1400 m2. Compact garden equipment has a steel case, supports the mulching function. The grass collector is not included in the kit, grass is released to the side. The model has a 51 cm width, the variable cut height range from 28 to 75 mm.
  • Oleo-Mac G 44 PK Comfort Plus. The model of the lawn mower with a steel body and a width of a 41 cm width is suitable for processing plots up to 1000 m2. You can use the rear emission of grass or a collection in a special container of 70 liters. The technique is non.self.propelled, equipped with a comfortable folding handle, the position of which can be adjusted. The haircut height range is 28-75 mm, there is no central adjustment.
  • Oleo-Mac G 48 Tbq Comfort Plus. Self.propelled lawn mower with a steel case, optional possibilities for mulching, 70 liters of grass collector in the kit. The technique supports the rear emission of grass, has a width of the Prokos up to 46 cm, is able to cope with the care of the area of ​​1800 m2.

When choosing a lawn mower for plots with an area of ​​more than 1000 m2, it is worth immediately focusing exclusively on gasoline equipment.

If the lawn is quite even, you can choose non.self.propelled models with a width of the Prokos up to 50 cm.

For sites with complex relief or high grass with rough stems, it is better to choose the most powerful equipment with increased cross.country ability and drive to wheels. She will cope with the task, even if the haircut of vegetation is rarely performed.

Rules for use

The instruction manual attached to each lawn mower allows you to get a complete picture of the necessary care of the technique. Gasoline models may periodically require oil replacement, engine speed, sharpening knives. Before you start the engine, you should check the drive belts and pulleys. If the internal combustion engine is hopping, it may be worth replacing the air filter. Periodically, lubrication or replacement of wheeled bearings may be required.

Both electric and gasoline lawn mowers in contact with solid obstacles may be damaged.

If the cutting element has failed, extraneous noise is heard, you must first turn off the food first, and only after that to inspect or replace the part.

How to Change Lawn Mower Oil

correct, launch, oleo-mac, lawn, mower

Upon completion of the device, the device case is carefully inspected, adhering stems and leaves are removed.

correct, launch, oleo-mac, lawn, mower

Starting 2-Stroke Strimmer After Winter

When working with garden technique, it is important to observe the selected interval and speed of movement, otherwise cutting of grass will occur unevenly. The use of protection products for the eyes and hands of the operator should be provided, use high boots when pumping uneven overgrown sites so as not to get injured.

Instructions for Oleo-Mac Max 48TK

P gr tr cz rus pl manual de instruoçõ εγχειριδο χρησης και συντηρησης çi̇m bi̇çme maki̇nesi̇ kullanim kilavuzu návod k pohesití aja. 66060295C. Mag/2007- Printed in Italy

P introdução para um emprego Correto Da Corta-Rolvas E Para Evitar Acidentes, Nancear o Trabalho Sem Lido Manual Com a Máxima Atençlement. NESSTE Manual EnContram-E as Descriçá’s de FuncionoMento Diverssos Componentes E As Instruff Controle E Para a Manutençape. N.B.

Componentes Da Corta-Relvas 1-Comando Acelerador 72-Alavanca Embreagem 83-Punho 94-Sacolhe-Relvas 10 5-Defletor Trazeiro 11 6 6 6 6. Regulagem altura do pugno indicador altura de Corte Regulagem altura de Corte Punho de Arranque Frey Motor Comando Gr Ether

1 2 3 4 PORTUUGUS NORMAS de Segurança Uma Série de Conselhos que Devem Ser Absolutamente Resepeitados Para Evitar Acidentes até Muito Sérios. one. LEIA Atentamente E Siga as Instructions Escritas Nas Etique Fixadas Sobre a Máquina (Vide P. 2). 2. Certifique-E que Ninguém, ParticularMente as

5 6 7 8 Ελληνικα ΠΡΟΔΙΑΓΡΑΦΕΣ ΑΣΦΑΛΕΙΑΣ Eδώ παρακάτω αναφέρονται ορισμένες συστάσεις που πρέπει να τηρούνται υποχρεωτικά προς αποφυγή ατυχημάτων, ακόμα και πολύ σοβαρών. one. Διαβάστε προσεκτικά και ακουθείστε τις οδηγίες αναγράφονται ετικέτες του μηνήματος (σελ 2). 2. Bεβαιωθείτε

9 10 11 12 Türkçe güvenli̇k önlemleri̇ di̇kkat: KazAları Ve yaranmalar önlemek ve makinanızı doğru kullanmak çin aşağıda verilen bilgileri dikuyun. one. Makinanın üzerindeki Etiketleri Dikkatle okuyun Ve Bunlarda yazılan bilgileri uygulayın (Sayfa 2). 2. Çalışma alanınızda insanların ve

13 15 14 česky bezpečnostní předpisy dodržujte bezpodmíneční následující rady, vyhnete se tak i velmi váath. one. Pozorní si přečthange a dodržujte pokyny uvedené na štítcích připevněných ke stroji (číslo 2). 2. Přesvědčete se, že nikdo, zejména ne děTi, nestojí v pracovním dosahu sekačky

1 2 3 4 Russian safety rules to prevent accidents, strictly observe the following instructions: 1. Carefully read the instructions on the signs attached to the machine (. 2). 2. Do not allow children and unauthorized persons to stand in the area of ​​the car 3. NE

5 6 7 8 Polski Zasady Bezpieczeństwa Aby unique niebezpieczeństwa wypadków, przystąpieniem do prac y, należy zapozna się w poniższymi zasasadami bezapiecest. one. Uważnie przeczytać. 2). 2. SPRAWDZIFI,

1 2 3 4 Português Ελληνικα Türkçe VESTUÁRIO DE SEGURANÇA ΠΡΟΣΤΑΤΕΥΤΙΚΗ ΕΝΔΥΜΑΣΙΑ ΑΣΦΑΛΕΙΑΣ KORUYUCU GÜVENLİK GİYSİSİ Ao trabalhar com o corta-relva, utilize sempre um vestuário de protecção homologado. A utilização do vestuário de segurança na elimina o Perigo de Accidentes Mas Reduz as Suas

5 6 7 8 česky Russian polski bezpečnostní ochrannorn ds. Použití ochranného odeststraní nebezpečí úrazu, ale v případě nehody sníží její důsledky. Při vhange vhodného vphu si

1 2 4 3 PORTUGUUS ελληνικα türkçe antes de petic em movimento πpin aπo θeσh σe λeitoypγia montaj nota: ema Relaçander ao motor, Consulte o Manual de Instructions. Σημείωση: για όσον αφορά τον κινητήρα, βλέπε τχειρίδιο πουνάπτεταιι. Nota: Için motorlarının kullanım kılavuzuna bakın.

5 6 7 česky pcski před uvedením do chodu before starting the Przed Uruchomieniem Kosiarki Pozn.: Údaje týkající se motor jsou uvedeny ve zvláštní příručce. Pershot and ohm ss and and and with the lawn mowers carefully read this instructions. Uwaga: Zasady Obsługi

9 10 11 12 PORTUUGUS ελληνικα türkçe antes de petic em movimento πpin aπo θeσh σe λeitoypγia montaj saco de reda fixe o travêsso (n, fig.9-10). Σακος συλλογης τλοης τοποθετήστε την τραβέρσα (αρ., Εικ. 9-10). Çi̇m Toplama Torbasi Travers Parçasını (N, şekil 9-10) Takınız. ATENSYO!. a

14 13 Español česky před uvedením do choduu sběrnñ vak na trávu namontujte příčnou konzoli (n, obr. 9-10). Upozornění! Pří credi spoj má motleyžní stranu. Strana (X, OBR. 11) je větší a musí se instalovat sm V. Strana (y) je menší a musí být směrem dovnitř koše. Příčnhange spoj je

9a 9b 9c 10 11 Portuguê ελληνικα türkçe arranque ekkinh çaliştirilmasi normas de segurança. Controla O Motor Antes de Dar Partida: Consulte o Manual Do Motor Dar Partida Na Corta-Relvas Numa área Limpa, ONDE NADE HAJA RELVA Alta. Inspecione a área que Deverá ser cortada e remova pedras,

12 13 14a 14b 14c česky pcski zapnutí launch of the engine Uruchomienie spuštění bezpečnostní předpisy. Před spuštěním motor zkontrolujte: viz návod k motro. Sekačku zapněte ve volném prostor bez vysoké trávy. PLOCHU, Kterou Chcete Sekat, Dobře Prohlédněte a Odstraňte Všechny Kameny,

16 15 18 18 Portuguê ελληνικα türkçe arranque. Paragem Touch-N-Mow Ekkinhσh. Ακινητοποίηση touch-n-mow touch-n-mow çaliştirilmaasi. Tutma işlemi mod. COM ReFERência M Antes Do Arranque Consulte O Manual Do Motor E Do Corta-Relvas. Para Desligar o Starter (Dispositivo de Arranque. Mola Soleta)

19 20 21 čESKY POLSKI spuštění. Zastavení Touch-N-Mow PCs of the engine, oconed the “Touch-N-Mow” Uruchomienie. Zatrzymanie touch-n-model označením m puštěním viz návody k motru ackačce. K Deaktivaci Startéru (Vybitá Priance) Viz návod Motor. Spouštění bezpečnostní

2 1 3 Portuguê ελληνικα türkçe utilizaçação e paragema lâmina ekkinh στMathama λ Did Kesi̇m Ve Durdyurulmasi Biçak Mod. COM ReFERYNCIA F Arranque Lâmina 1. Puxe a alvanca (a, fig. 1) EM DireCçJo Do Guiador. 2. Desloque à frente a alvanca (b, fig. 2). Mοντ. με κωδικό f εκκίνηση λeπιδας 1.

5 česky pcski používání a vypnutí čepel iCpoleeobhe and octahobka lzzenie i wyłączanie silnika nóż model označením f spouštění čepel 1. Přitáhněte páčku (a, obr. 1) Směrem k řidítkám. 2. Stlačte páčku duředu (b, obr. 2) Upozornnkí! Nespouštějte nůž před zapnutím motor; Spojka

Instructions for Oleo-Mac Sparta 25 Tr Eco

Introduction for the proper use of a bush cutter in order to avoid accidents cannot begin work without a thorough study of this instruction. You will find here explanations regarding some parts of the Kustorez, as well as instructions for the necessary checks and maintenance. ATTENTION:

Precaution measures Protective clothing Parts of the Lawn Mushrooms Warning Symbols Assembly Recommended cutting devices launch engine Stop stop Preparation for maintenance storage head with nylon fishing line Technical characteristics Warranty

Precautions 10. The grass grinder can only be transferred with the engine turned off. ATTENTION. Mower when used properly. This is 11. When working, take a stable and safe position. Fast, convenient and effective tool. For 12. Custores can only be launched well

Protective clothing when working with a mower always wear certified put on protective boots with anti.slip protective clothing. The use of protective clothing does not eliminate the risk of soles and steel tips (rice.3). injury, but reduces the possible consequences

1-belt-suspension 2-switch On/OFF 3-the lid of the muffler 4-engine 5-air filter 6-cover of the fuel tank of the lawn mowing part 7-fuel tank 8-launch handle 9-handle 11-protection against scatter 12- Trimmer nozzle 6

Warning characters put on protective shoes and gloves when working with metal or plastic disks. Make sure that other people are at least 15 meters away. Pay attention to the discardation of objects. Put on a helmet, goggles and headphones. Before

Assembly setting protection against the scatter set protection against the scatter (a) on the bar using the screws (c) to the position that allows the operator to work safely. Attention. this model is not designed to work with the disk. use only trimmer nozzles. Installation of the handle

Engine launch of the fuel mixture (rice. 16-17). Before refueling, shake the mixture with the mixture use 4% (25: 1) gasoline mixture always refueling when the engine is turned off and far from if you use special oils for 2-bed engines, open fire

Start set the starter (D) lever (D) in a fully open position (3, the start of the engine fill out the carburetor, pressing the button (a, rice. 24). Rice.thirty). Translate the switch (a, rice. 27) to position “I”. When starting attention: if the engine is heated, do not use the gas lever approximately

Engine stop stopping the engine release the accelerator lever (in, rice. 34) and wait a few minutes until the engine goes into idle mode. Turn off the engine by transferring the switch (a) to the Stop position. Carburetor before adjusting the carburetor clean the air filter (with,

Preparation for the work belts correctly use the gas mowers for balancing and distribution of weight, put the belt-suspension belt hook hook for a special hole on the grassboard adjust the position of the suspension belt as it is convenient. CONTROL.

Service warning. Always put on protective gloves while performing equipment care actions. It is forbidden to carry out these work with an unique engine. Air filter every 8-10 hours of work remove the lid (a, rice. 48), carefully shake the filter (c) at

STORAGE. Carefully study all the maintenance instructions clean the grass grinder and lubricate the metal parts with oil, remove the remaining fuel from the fuel tank and set the lid to the place, remove the spark plug and pour a little oil into the cylinder, pull the launch vehicle

Head with nylon fishing line Replacing nylon fishing line: 1. Unscrew the lid (rice.68. p.14) and remove the coil. To completely disassemble the head; Remove the locking ring. 2. Bend the wire in half so that one end is longer than 10 cm longer. Enter the wire into a special hole (in,

Technical characteristics volume of the cylinder engine Holoid speed maximum rotation speed of the output shaft engine speed at the maximum speed of the output shaft rotation capacity of the fuel tank ignition electronic carburetor of the diaphragm type device

Warranty Certificate of this Ball machine is developed and manufactured using the most modern technological processes. The manufacturer gives a guarantee for its products within 24 months from the date of purchase, provided that they are used for personal and unprofessional

How to start a lawn mower properly?

Regardless of the type of action, there is a strict order that must be observed, that is:

Inspection and verification

Any trimmer malfunction for grass can be a serious danger.

Poorly tightened bolts fixing the clutch bell to the engine can lead to rapid abrasion of clutch pads, and any leak of the fuel system often leads to ignition and burns or fire.

The weak tightening of the gearbox bolts can lead to the fact that the rush shaft bar will jump out of it and the trimmer for the grass will stop working. Weak tightening of bolts fixing the handles can lead to involuntary lowering the shaft and damage to the cutting tool.

Therefore, before any launch, you need to at least briefly inspect the device in search of defects. This is especially true for any first launch, it does not matter, after the purchase, or after storage. During the working starts, it is permissible to inspect only the fuel system for leaks.

One of the most important stages of verification before any launch is to determine the amount of lubricant in gearboxes and a drive shaft, for which you need to disassemble a trimmer for grass and remove both gearboxes from the shaft.

So you will evaluate the quantity and condition of the lubricant not only from the side of the gas station, but also in the area of ​​contact of the shaft bar with the gear of the gearbox.

Also, once every 2-3 weeks, check the amount and condition of the oil filled into the crankcase of four.stroke engines, if the device will work with a low level of oil for a long time, then the probability of jamming of the crankshaft is likely.

The gas station is fuel

This operation has to be done after purchasing and winter storage, as well as during the termination of work caused by the production of gasoline. Four-stroke engines are seasoned with pure AI-92 gasoline, and two-stroke with a mixture of fuel and special oil, which we talked about here.

Remember, if you refuel a two.stroke trimmer for grass after winter storage, be sure to drain the old fuel from it, because it has already lost the lubricant, so the crankshaft bearing and cylinder.piston group will work without lubrication.

Launching a benzotrimer

Regardless of the type of launch, there are 6 actions that have to be performed always:

  • fuel pumping;
  • the transfer of the air damper to the “Launch” position (“Closed”, “OFF”);
  • the transfer of the switch to the “inclusive” position (“VCL”, “on”);
  • pressing and fixing the gas key;
  • the jerk of the starter cable with the choice of free move;
  • transfer of the air damper to the “work” position (“open”, “on”).

The first 3 points from this list can be performed in any sequence, but you can pull the cable of the air starter only after them. Neglecting fuel pumping will lead to the fact that a hand starter’s cable will have to pull the moving piston of the motor to pump a sufficient amount of air that sucks from the carburetor fuel.

The neglect of the air damper will lead to a strong rethink of the mixture, which is good for a running engine and extremely bad for starting, because such a mixture is well ignited only inside the heated cylinder.

After the air damper is transferred to the closed position of the incoming air, it is not enough to operate the motor at idle, so click and fix the gas key (accelerator, engine speed regulator). The button for turning on/off the motor blocks the operation of the ignition system, so before starting, transfer it to the “inclusive” position.

If you do not transfer the switch to the right position, then the voltage will not come to the candle, which means there will be no spark that ignites the mixture in the cylinder.

After the engine works, transfer the air damper to an open position, because the highly re-enriched mixture is good for starting, because it is flammable even in the cold cylinder, but due to lack of air, the fuel does not burn out completely.

An attempt to mow grass with a closed air damper will lead to a sharp drop in the power of the motor and a strong heating of the valves, so the long work (tens of hours) leads to the gap of the valves or damage to the laying of the cylinder head head.

If the motor does not start or works incorrectly

The reasons that the motor does not start with a two or four jerks of the manual starter cable can be:

Most often, this is due to the incorrectly executed trimmer for the grass, when the procedure is violated or some important point is not executed, so the launch is quite correctly carried out and the motor will work. If the mower is poorly started after storage, then most likely, old gasoline is exhausted, so it is enough to change it.

If the trimmer for the grass was not served for several seasons, then the poor launch can be due to dirty air or fuel filter, so it is enough to rinse or replace it.

If all actions are performed correctly, but there is no positive result, contact the workshop or independently diagnose or repair.

Advantages and disadvantages

The main advantages of Oleo-Mac chainsaw carburetors:

  • Large resource;
  • Small sizes;
  • Three adjustment screws allowing to make accurate setting (a feature of all modern chainsaws with membrane carburetors)
  • Small sizes and puzdo are small mass of the structure, for comparison with analogues;
  • Available price of parts, carburetor assembly;
  • Unpretentiousness to the quality of gasoline.

It is also necessary to note a number of shortcomings:

  • It can be difficult to find a repair kit on sale, in small towns;
  • Difficulties with options, the highest requirements for the qualifications of settings;
  • The need for repeated adjustments for long.term operation.

Oleo-Mac 947 chainsaw. Characteristics of the model

The advantages of this semi.professional portable saw. Low vibration, a small center of mass and the highest performance in all weather criteria.

The piston of the gasoline engine of this model is made of forged steel and equipped with 2 rings to increase the resistance of the element.

The saws of this semi-professional OLEO-MAC model consist of a forged circuit installed on the iron railway. The headset is lubricated by automatic and controlled by an adjustable oil pump.

The characteristics of the signature file contain:

  • The factory power of the motor is 3.1 liters. From.;
  • Fuel tank capacity / oil tank. 500/270 ml
  • Recommended tire length for a suspended tire. 45 cm;
  • The weight. 5.6 kg.

Read how to adjust the carburetor of the Chinese chainsaw

The internal components of this OLEO-MAC are located in a shockproof case, Yaki withstands long heating, vibration and low height.

Oleo-Mac Sparta 25 carburetor adjustment

Oleo-Mac Sparta 25

  • Power / volume. 1.0 l.FROM. 0.8 kW / 25.4 cm³
  • Tap Go head. 2.40 mm (130mm)
  • Knife diameter. 255 mm with 3 blades
  • Dry weight. 6.2 kg
correct, launch, oleo-mac, lawn, mower

SPARTA 25 Detailing SPARTA 25 Details 25

OLEO-MAC SPARTA 25 BASS with the highest performance indicators, properties and ergonomics. Namely, it is hunting to note the fact that the installation of additional bearings, also a joint connection of the motor and working shaft, ensured a significant decrease in vibration, which could not but affect the performance and quality of labor. To hold motorcycles, a paraphernalic belt is used to control the process, a paired bicycle handle is provided. The Oleo-Mac Sparta 25 model takes into account all the Комментарии и мнения владельцев from the predecessors, and specifically. A primer is installed for pumping fuel and a system of lightweight starting was implemented. Apart from this, the clutch clutch is improved, which allowed to significantly reduce the load on the working shaft. The standard includes a mowing head with automatic fishing for fishing line, 3 huts and a protective screen that prevents the release of branches and grass to the side.

The most powerful and reliable engine (1 liter.FROM. / 0.8 kW). Small.sized and light engine with a nickel shiny cylinder (rice.one). Crankshaft and tarnished steel connecting rod. Electric ignition guarantees the highest performance, light start and long service life (rice.one). SPARTA 25 Kustorez is simple for starting even for the least experienced user. The presence of “primer” (“a” rice.2), which recalls the mixture of the carburetor, allows you to start working with a smaller effort (rice.2). Easy access and air filter service: the operation does not ask for the use of tools, but is carried out by pressing a comfortable latch of the spark plug, regardless of protection to prevent breakdown from the impact, is in sight: only the ignition candle key is required for cleaning and replacement. A large tank for fuel consistency allows autonomy for a long time and just the lawn mower complies with the current rules: the ergonomic handle connects all the control elements: the lever of the throttle, the launch switch and the stop (rice.5), have an accelerator blocking security system (“b” rice.4) which warns random acceleration. Centrifugal clutch with sliding blocks, covered with antifriction material, is designed to withstand long working conditions (rice.5). Transmitting a tube (Ø26 for Sparta25), one hundred percent durable, guarantees good resistance to a small mass. The fuel tank is protected from random clashes (“c” rice.6). Reducing vibrations to a minimum thanks to:. 5 self.lubricated bushings placed by snutri transmission tubes (“D” rice.7). Anti.Vibration on the motor cover. Anti.vibration on the support of the steering wheel handle (only Sparta25) “E” rice.8) flexible shaft of boxes (Sparta 25tr) made of steel with a special shell along the entire length (“f” rice.9) warns annoying vibrations from the operator and increases the service life of the machine. The adoption of a transparent reservoir simplifies the visualization of the level of fuel. On the handle there is also a mount for the wire harness (function for Sparta25TR).

Number in the diagram Article of the details Name
one 3960067ar Fastener screw for motor skoses Oleo-Mac Sparta 25, EFCO Stark 25
2 4161570R Engine block assembly for Motokos Oleo-Mac Sparta 25, Efco Stark 25
3 4098683r The puck of the crankshaft for the Motokos OLEO-MAC SPARTA 25, EFCO Stark 25
four 4160026R Piston Pull for Motokos Oleo-Mac Sparta 25, EFCO Stark 25
5 3819006r Stop puck for Motokos OLEO-MAC SPARTA 25, EFCO Stark 25
6 3801015R Screw for Motokos Oleo-Mac Sparta 25, Efco Stark 25
7 61010001R Oleo-Mac Sparta 25, EFCO Stark 25 Motokos
eight 3916005R Washer for Motokos Oleo-Mac Sparta 25, EFCO Stark 25
9 61010005 Muffler cover for Motokos Oleo-Mac Sparta 25, Efco Stark 25
ten 3806028 Screw for Motokos Oleo-Mac Sparta 25, Efco Stark 25
eleven 4095211R Muffler fastening for Motokosa Oleo-Mac Sparta 25, Efco Stark 25
12 61010011 Molushter gasket for Motokos Oleo-Mac Sparta 25, EFCO Stark 25
13 072700048R Piston Ring for Motokos OLEO-MAC SPARTA 25, EFCO Stark 25
fourteen 3801010R Screw for Motokos Oleo-Mac Sparta 25, Efco Stark 25
fifteen 4160025R Stop finger ring for Motokos Oleo-Mac Sparta 25, Efco Stark 25
16 4161030B Piston included for Motokos OLEO-MAC SPARTA 25, EFCO Stark 25
17 3055101 Spark plug for Motokos OLEO-MAC SPARTA 25, EFCO Stark 25
eighteen 4098232R Kolenval Oleo-Mac SPARTA 25, EFCO Stark 25 Motokos
19 3064005ar The puck of the crankshaft for the Motokos OLEO-MAC SPARTA 25, EFCO Stark 25
twenty 3024010R Stop Ring for Motokos OLEO-MAC SPARTA 25, EFCO Stark 25
21 3037026R Kolenval I needle crankshaft for Motokos Oleo-Mac Sparta 25, Efco Stark 25
22 4161599R Cornflower for Motokos Oleo-Mac Sparta 25, EFCO Stark 25
23 4160479R Kolenlval for Motokos Oleo-Mac Sparta 25, Efco Stark 25
24 61010012R Motokos motokos Oleo-Mac Sparta 25, Efco Stark 25
25 3034003r Kolenlval bearing for Motokos Oleo-Mac Sparta 25, Efco Stark 25
26 3025019 Stop puck for Motokos OLEO-MAC SPARTA 25, EFCO Stark 25
27 3035023R Kolenlval bearing for Motokos Oleo-Mac Sparta 25, Efco Stark 25
28 4160124R Washer for Motokos Oleo-Mac Sparta 25, EFCO Stark 25
29 3050030r Crankshaft oil seal for Oleo-Mac Sparta 25, Efco Stark 25

Adjustment of the carburetor of the lawn mowing for grass

If your trimmer for the grass cannot be made or during work it develops incomplete speeds, it is necessary to conduct a thorough inspection and identify the cause of malfunctions. Most often, this is some small problem, such as a burned candle, which can be eliminated by personally, without resorting to the help of professional repair masters. But sometimes the reason is much more serious, and it lies in the carburetor.

If you find out exactly that you need to adjust the motor carburetor, do not rush to do it yourself, contact the customer service center. Adjustment of the carburetor (especially foreign manufacturers, including OLEO-Mac) requires the use of high-precision professional equipment, which you can hardly afford-it is quite expensive and does not pay off without constant use.

The entire procedure for adjusting the carburetor usually takes 2-3 days, in particularly difficult cases, this period increases to 12 days.

How to cook gasoline for Italian motorcycle?

OLEO-MAC lawners requires special fuel: a mixture of gasoline and motor oil. You will need: to prepare the composition:

  • high.quality gasoline;
  • Oil for a two-stroke engine (OLEO-MAC oils specially designed for its own engines are best suited).

Percentage of 1: 25 (one part of oil per 25 parts of gasoline). If you use “native” oil, the ratio can be changed by 1: 50.

It is necessary to mix fuel in a clean canister, after pouring both components, thoroughly shake. to obtain a uniform emulsion, after which the fuel mixture must be poured into the tank.

Important clarification: motor oils in the degree of viscosity are divided into summer, winter and universal. Therefore, when choosing this component, always consider which season on the street.

It can be said that trimmers for the grass of oleo-mac of Italian production are a quality technique, although quite expensive.