The lawn mower is not gaining momentum what to do. Sapun and graduation channel

30th December 2022

The reasons for the fall in the motorcycle. The lawn mower does not develop full power

Any person owning a country or land plot is well aware of the problems of the fight against excess vegetation. Now a trimmer for the grass has come to the rescue, which successfully replaced the usual braid in this field. This unit is very convenient in work, but it, like any mechanism, also, due to difficult working conditions or incorrect operation, is characterized by failing. Situations are quite common when a trimmer for grass does not gain momentum. To understand this problem, it is necessary to understand some aspects related to the functioning of the device.

All trimmers for grass are classified according to the type of power: gasoline or electricity (from the network or battery). It should be noted that gasoline mowers in many respects exceed their electric and battery analogues. Despite the fact that they all perform similar functions, the difference in performance, maneuverability and effectiveness is very noticeable. However, the general principle of operation of all types of manual braids is almost no different- the devices are equipped with engines (two- or four-stroke ICE or electric motors), which drive the cutting unit (reel with fishing line or metal disk). All elements are fixed on the line of straight or curved shape, including the handle for controlling the trimmer on which the main buttons are located.

Since the problem of weak revolutions is more characteristic of gasoline trimmers, they will be given more attention. So, the lawn mower is very comfortable in work and unpretentious in maintenance. over, most of its malfunctions are caused by ignorance by the user of elementary things, which are written in the instructions. Therefore, before starting the operation of the unit, it is necessary to carefully study the management of the manufacturer. In particular, in order to start the engine, it is necessary to do the following sequential actions:

turn on the ignition button;
press the silicone button for pumping gasoline several times;
close the air damper;
The gas lever is installed in a position for high speeds;
first make non.leaf with the starter handle to feel the engine resistance, then jerk sharply.

If the lawn mower started up, but stalled, you need to put the air damper in the middle position and repeat the attempt. When the engine works, you need to slow the gas and open the air damper, since the trimmer for the grass functions only on the leak.

Important! The mode of operation of the trimmer for the grass depends on the various environmental influences. In hot weather, the unit should be given more time to cool. When working in conditions of dense thickets or high vegetation, the engine also overheats strongly. It is necessary to take five-minute breaks every 15-20 minutes.

The reasons for the weak.speed trimmer for grass

If users complain to the trimmer for grass, which does not gain momentum, this means that it works normally on idle, and when pressing gas does not develop the necessary power. This can happen as a result of a long downtime of the apparatus without activity. These problems are typical for gasoline devices, including the Husqvarna 128R, STIHL FS 38 and Hitachi different modifications.

Working with a trimmer, you need to monitor its behavior all the time. a drop in revolutions and unusual noises signal the malfunctions in the aggregate. Sometimes you give gas, and the trimmer for the grass swims. In such cases, the work should immediately be suspended, let the mechanism cool and start searching for possible problems. They can be of a different nature of both the technological plan and external factors related to the conditions and features of the operation of the device.

External factors

Several factors that are not related to its breakdown affect the reduction of revolutions:

filter pollution due to the hit of particles of dirt and dust in it;
use of poor.quality fuel;
incorrectly prepared mixture (relevant for trimmers with two.stroke gasoline engines);
pollution of the muffle of muffler particles of vegetation, soil elements and other objects.

In this case, in the second and third cases, the formation of a soil in the combustion chamber is formed, and the elements of the carburetor are clogged.

technical issues

The technical problems of the lawn mower mainly occur in the fuel and ignition system. You can cope with them yourself.

Когда ручная косилка не заводится или глохнет, проблема может быть связана со свечой. The dark cargo speaks of poor carburetor adjustment and low gasoline quality.
The reason for the incorrect operation of the trimmer for the grass may be clogged fuel hose. Filters are also often clogged.
Another internal problem. the muffler is covered with soot. From this, the turnover of the grass for the grass falls strongly. Output. you need to clean the muffler.

Important! If the unit does not work due to breaking up the engine, serious problems may occur. In this case, the malfunctions that can be eliminated with your own hands include only the destruction of piston rings. With more serious problems with the motor, if there is no warranty, you should be prepared to visit the workshop.

The lawn mower stalls when you press the gas

The gas mushroom gas key

Reel Mower vs. Rotary Mower ~ Which Is Better?

As practice shows, in most cases, the cause of engine stopping is the dumping of the carburetor associated with long.term storage or operation of the tool in an aggressive environment (temperature changes, high humidity, dustiness), high loads or wear of individual parts. The characteristic signs of the need to configure the carburetor include increased vibration. If you have experience in repairing the fuel system of gasoline engines, you can eliminate the problem without any problems, otherwise you can familiarize yourself with the detailed instructions for setting up the carburetor.

The hole in the fuel cover (saepun) of a trimmer for grass

The second of the possible reasons why the trimmer for the grass stalls when pressed on gas is blocking the hole in the lid of the fuel tank (sapuna). If small particles of dust, the remnants of grass and sand gets into it, a vacuum is created in a gas tank, as a result of which the fuel ceases to enter the carburetor. You can clean the benzotrimmer’s saapun with a conventional sewing needle and subsequent blowing with compressed air. Experts recommend when completing the work once a few mowing to clean the cabin. If it is not possible to clean the lid, it is necessary to replace.

Fuel valve of the lawn mower

With a similar problem, it is worth paying attention to the fuel valve, which, when clogging, ceases to normally pass the fuel mixture. By solving this malfunction, it is weakening using a suitable tool. In addition, the problem with the circulation of the fuel mixture may cover in the contamination of the valve. To do this, just blow it with a stream of compressed air.

Trimmer malfunctions for grass

Trimmer for grass is a convenient and affordable replacement for the lawnical mower. Its cutting part is made in the form of fishing line, knives or disk installed on the drum, which is closed on top of the protective casing. The basis of the design is a bar, which is adjustable in height, at the end there is a comfortable handle and shoulder belt.

Like any other technique, a trimmer for grass may be unknown, and so that the breakdown does not lead to the final failure of the tool, we suggest you familiarize yourself with this article. Unit can break down for various reasons. Breakage occurs both in new trimmers and those that have long been operated.

A malfunction of electrical models

The reasons for the unexpected shutdown of an electric lawn mower are associated with a cliff of the cord or the absence of current. In the first case, it is recommended to check the cable for a cliff. To replace the power cord, you need to pull out the fork out of the outlet, open and dismantle the circuit lid.

Before unscrewing the squeezing of the cable? It is necessary to remember the diagram of its connection to the switch. To disconnect the cord, a hexagon is used (diameter 1 mm). The clip is released, the conductors are dismantled. To check the cable for a cliff, multimeter is used. If necessary, a new cord is installed. In this case, the reverse sequence is observed.

In the second case, it is recommended to connect another device to the mains. Electric devices may not work when the fuse is damaged in the fork. To carry out repair work, you will need to disassemble the fork. For this, a screwdriver and a tester are used.

Motor malfunctions occur when overheating of the lawn mower:

In the first case, it is recommended to wait a few minutes so that the motor cools. In the second case, you need to remove the stuck object. The effectiveness of the cooling system depends on the state of the air filter.

Dirty device poorly passes air, which helps to turn off the device. Experts advise cleaning and changing the filter once every 3 months (with constant operation of the lawn mower).

With a breakdown of the electric motor, the corresponding smell and noise appear. In this case, you need to replace the drive.

The vibration of the motor on idle, on a cold or warm engine: possible causes

Immediately note that there are many reasons for the emergence of vibration of the internal combustion engine, starting from the torn engine pillows (supports) and ending with ignition passes and the tag of power unit. For a more accurate definition, first of all, you should pay attention to one or other symptoms.

The fact is that vibration can be either constant (regardless of heating and loads on the unit), and manifest itself in a certain mode of operation (idle or high speeds, on cold or hot). Another engine vibration can manifest itself on a cold ICE, but as it warms up, it completely disappears. Let’s understand.

For example, if the engine was recently versed for repair (possibly capital), then there is a high probability that the crankshaft was not properly covered after the reverse assembly. The result is a beating and increased vibrations.
We also note that after repairing the motor to imbalance and vibrations, different weights can lead to the details of the cylinder-piston group. The more weight difference turns out, the stronger the vibrations will be. For this reason, experienced craftsmen weigh pistons, fingers, etc.D.
Often the reason for vibrations is that the engine is troit, that is, one or more cylinders for any reason do not work or work with failures. As a rule, the elimination of the cause of the touch automatically eliminates the presence of vibrations of the power plant.
Do not forget that the timing belt incorrectly set on the marks or the chain also causes vibrations.The reason is that the engine works unstable due to violation of the phases of gas distribution.
Many engines have in their design special balancing shafts that are necessary in order to “extinguish” fluctuations. Quite obvious, problems with these shafts will lead to an increase in the vibrations of the motor.

The engine pillows are one of the most common reasons why the engine vibrates. In fact, this is a damper made on many cars from rubber to absorb vibrations. As you know, over time, the rubber daggers and cracks, loses its properties as a result of technical fluids and t.D. The main thing is that the engine with a damaged pillow cannot work softly.

If you recently moved from one car to another, it should be borne in mind that different engines may differ in vibration loads. The number of cylinders, layout and a number of other features affect the level of vibrations. In simple words, the usual in-line engine for 6 cylinders can operate with less vibrations than a 4-cylinder and, especially, 3-cylinder engine. over, in this case, we are not talking about problems, since for a particular ICE a certain level of vibration can be considered the norm.
We also add to reduce vibrations, on the crankshaft of many engines there is the so.called dignified damp. If problems arise with the element, the motor will begin to vibrate more strongly.

As you can see, at the initial stage it is important to accurately determine the cause of the strengthening of vibrations. For example, in most cases, it is enough to replace the engine support or solve the problem on which the engine is troit. However, it also happens that the power unit itself needs to be disassembled and repaired.

Repair of mechanical braids is carried out when the cutting elements are blown up or damaged. In this case, experts recommend to independently dismantle removable knives. Evadal is used to sharpen them. If necessary, the battery is replaced in battery.

Before repairing the lawn mower, the type of motor is determined:

Ways to eliminate problems

The first three reasons are quite simple to eliminate. If the matter is the mixture, it is necessary to pour old fuel from the tank, prepare a new emulsion from high.quality gasoline and engine oil (if your motor requires a mixture) and pour it into a fuel tank. If a trimmer for grass works on clean gasoline, it’s still easier.

In the second case, it is necessary to carefully release the details of the trimmer for grass from the wound grass.

If the filter is clogged, you can try to rinse it. If this procedure has not brought the effect, replace it with a new.

The last reason why the lawn mower does not work properly will require you a little more knowledge and skills.

In order to properly adjust the carburetor of the lawn mower, it is necessary to observe a certain procedure. First of all, carefully clean the air filter. The easiest way to rinse it (it is advisable to carry out the filter with water regularly after 9-10 hours of operation).

After that, in the diagram of your trimmer for grass, which is in the instructions for the operation of the device, find the adjustment screws. Usually there are three of them: the first is responsible for the supply of fuel, the second. for idle, but the third is designed to limit the number of maximum engine speeds.

Next, you should turn on the unit and wait for the engine to warm up.

Slowly twist the first adjusting screw (fuel mixture). Catch the moment when the motor begins to stall, and turn the screw in the opposite direction 45 degrees. If you did not have time and the motor stalled, the screw should be turned 90 degrees. Open the throttle and see how the speed is going. Next, you should slowly unscrew the screw (each turn. the same 45 degrees) until the moment when, with full gas, the motor begins to firmly issue maximum revolutions.

The second screw, as mentioned above, controls the engine speed at idle. Weakening it, you reduce the number of revolutions, tighten. increase. The screw must be adjusted so as to ensure confident operation of the motor at small speeds. Accelerate the engine for better starting a little. At the same time, make sure that before the movement of the knives/coil with the fishing line, the motor makes several dozen revolutions. With poor starting the engine, screw the screw slightly.

After you have adjusted the first two screws, test the operation of the device at the maximum engine speed. If necessary, you can limit it (maximum). this will serve as protecting the motor from “boiling”. To do this, you need to do the third screw. Unscrew the fixation nut until the moment when the control screw can be calmly turned. To increase the maximum speed, the screw must be loosened to reduce. on the contrary, tighten. Fix the screw position with a nut. Test the work of the motor again.

Spend the position of the screws regularly. a high level of vibration characteristic of benzocoses can cause their involuntary shift.

Remember that carburetor adjustment is not the final procedure. During operation, Motokos, most likely, you will have to mess with it more than once, because an unbalanced carburetor is both an increased fuel consumption and a quick failure of the candles, not to mention reducing the power and productivity of the device.

Features of the work of a trimmer for grass

turn on the ignition button;
press the silicone button for pumping gasoline several times;
close the air damper;
The gas lever is installed in a position for high speeds;
first make non.leaf with the starter handle to feel the engine resistance, then jerk sharply.

The lawn mower stalls at high speeds

Perhaps more and more a widespread complaint associated with gasoline trimmers sounds like this: “The lawn mower stalls”.

Naturally, a rather harsh fault may be a prerequisite for this. The lawn mower does not develop speed.Why is a Chinese lawn mower not gaining. The lawn mower does not develop speed, why the Chinese lawn mower does not develop momentum. But in most cases, the situation is even easier than it seems to be the 1st gaze.

In order to cope with such an inconsistent, first, try to deal with its causes without the help of others, because, having found out the reason, it’s even easier to fight with the inconsistency, and from time to time it is even self.destructive.

In fact, circumstances, this is when the lawn mower stalls at high speeds. There are quite a lot of these circumstances.

Another is the presence of defects in the power system.

In this case, the lawn mower will stall at idle. I did not give any tangible result. Why is a Chinese lawn mower not developing momentum. Why does my lawn mower not develops momentum. Why the lawn mower. I can’t from the ground.And the revolutions are gaining from the floor. Dilems with the power system may lead to a drainage or incorrect carburetor adjustment.

Why is a Chinese lawn mower not developing momentum ?

Chinese lawn mower Analog Husqvarna does not develop turnover, the reason was very simple (watch in the video)

Vibrations that take place in the process of operation of the lawn mower can lead to a reservoir.

Incorrect adjustment of the lawn mower can be fixed by simply adjusting it in accordance with the requirements specified in the operating instructions.

In addition, sometimes gasoline trimmers for grass can stall due to the fact that the valve located in the gas tank lid just clogged or sticks.

To find out, try using a braid by loosening the gas tank cover.

If in this mode the device works properly, clean the valve.

Before you understand why any of the instruments of a summer house or a professional working with a motorcycle (benzocosa) stalls-it is worth distinguishing between two main situations when it happens. First, this is when the tool does not start after you have made the purchase, and the second. being in operation. So, we will analyze both.

After starting. The lawn mower stalls if the carburetor is incorrectly configured or it was swollen. Fuel is supplied unevenly, respectively, distinct vibrations occur.
When heated. The situation when the mechanism starts and works, but gradually “chokes” and stalls on the go. when gasoline boils in the carburetor, or the damper in the carburetor is not disk, but rotary view. In such cases, it is better to replace the carburetor itself. There is an air leakage option. when a coil or wire is broken in the ignition.
At high speeds. This also occurs from the rounding of the carburetor or clogging the lid on the gas tank. It is worth trying work with a slightly parted valve. Be sure to check the fuel intake hose. it can be a crackling or poorly attached to the base.
He is not gaining momentum. As the main reason why the engine is not gaining momentum. an air filter clogged. It is possible to subside a cable in a carburetor, a breakdown of a carburetor and the occurrence of problems with the motor drive mechanics.

There are times when the detail of the mechanism requires mandatory replacement, so we are always happy to offer. It is important to understand that sometimes saving on minor elements can lead to a breakdown of such global components as a carburetor or engine. Therefore, competent operation and timely replacement of the necessary particles will provide you with full work with pleasure.

How to get a motorcycle stihl

The main stages are how to get a STIHL motorcycle:

Before the operation of a gasoline trimmer for the grass, you should familiarize yourself with the instructions and check the trimmer for STIHL grass for each spare part. After you can collect it.
An important step is fuel preparation and refueling. You need to prepare the mixture in a measured container. Gasoline and oil are poured into it in the indicated ratio. Using a funnel, the mixture shimmers into the fuel tank.
At the first launch, turn on the ignition without opening the air damper. Put the device on an even and smooth surface for stability. Now. you need to sharply pull the cord from 3 to 5 times. Air damper can be opened in any case: the engine has started or not.

The first launch may require up to 15 jerks. After starting the engine, it is worth turning on idle for warming up. After a while, it is stopped by the button.

note! This instruction is universal, since in order to start the Stihl law trammer, you need to perform similar actions.

In the case of the launch of an electric trimmer for the grass, everything is much easier: you need to familiarize yourself with the instructions and act in accordance with it. Instead of fuel here electricity. The device works from the network, so it is important to provide sufficient power so that the trimmer for grass can gain speed.

After each operation, both gasoline and electric trimmer requires a thorough inspection.

Following the instructions, you can quickly eliminate any small breakdown on your own. But sometimes it is not possible to start the unit with your own hands. In this case, it is better to seek professional help, especially if this applies to the problem with the engine and the development of revolutions of the trimmer for grass or lawn mower.

Do.it.yourself repair and maintenance of a chainsaw

Benzopila are reduced, which makes them more popular and affordable not only for professionals, but also for simple, so to speak, amateurs. However, a widespread dependence. the lower the price, a less reliable device and more frequent failures, since the chainsaw also matters. But for the chainsaw of any price range, most failures can be avoided with proper operation, maintenance and timely maintenance. But no one is safe from the breakdown of the chainsaw and other technologies. Therefore, these are the main types of malfunctions of the chainsaw, methods for their diagnosis, elimination and repair.

All the main malfunctions of chain saws can be divided into two main categories:. engine malfunctions and its various components: the fuel preparation and supply system. ignition, a piston group with a crankshaft, a system for producing curtain gases;. malfunctions and malfunction of other components: lubrication system, clutch, chain brake, tire and others.

Engine starting problems

It is very important to determine the cause of the failure correctly, because otherwise we simply cannot eliminate it. If there are no extraneous sounds when trying to set up a chainsaw (knocking down, grinding, etc. D.), It often turns out that in fact there are no problems. For example, if you put the chainsaw and pull the fork for a long time, the engine simply pours and starts very much.

To properly start the engine saw engine, install the lever or switch to the “flap” position. Then you need to pump the mixture into the carburetor if there is a fuel pump in stock. Pull out the starting handle until the engine resistance becomes noticeable, and energetically extend the amplitude, taking your hand to the side. After two. Three such movements, the engine must first start, and then decay. If this does not happen, then it is necessary to transfer the lever to the position of half.gas or simply to the working position, and then continue to work the chainsaw in this mode. Many Pologaz chainsaws are recorded automatically when the air damper is pulled. Some models have an ignition with the key, it is important to make sure that it is turned on.

If the engine does not start, the first thing to do. unscrew and check the spark plug. There are times when the plant fills the burner with fuel in the cold season. Then you also need to unscrew the candle, dry the combustion chamber with one plant, clean the spark plug, screw it up and repeat the start. It is advisable to immediately check the presence of a spark. On a twisted candle, we put on a cap with a high.voltage wire, we put it on a cylinder, and we pull the starter. Visually observe a frequent blue spark. OK. We twist the candle in place and launch it. If there is no spark, change the candle and repeat the attempt. Again, no. Check the connection of the high.voltage wire to the spark plug, coil and ignition system.

In general, the condition of the candle can be used to determine the type of malfunction.

Dry. Most likely, the fuel mixture is not included in the cylinder. This is not a ignition system, so the candle is screwed and checked.
Wet, strongly sprinkled with fuel. The cause of the excessive fuel mixture is to violate the launch rules, as described above, or if the carburetor is incorrectly set up.
Covered with black carbon. This may indicate the use of poor.quality oil, an incorrectly configured carburetor or an incorrectly calculated ratio of gasoline and oil. The candle should be washed, cleaned of carbon deposits with a sharp object (awl or needle), rub the electrodes with a fabric and installed in place.

When checking the light of the ignition, it is necessary to pay attention to the gap between the electrodes: Normal is considered from 0.5 to 0.65 mm. Damaged or worn gasket should be replaced.

Correctly adjusted carburetor chainsaw provides its effectiveness at full capacity with the most economical fuel consumption.

The need for tuning a carburetor chainsaw is infrequent, since adjustment is originally performed by the manufacturer to achieve the optimal mode of operation. Adjusting screws are designed for a more accurate adjustment of the carburetor chainsaw, if necessary.

Among the causes of violation of fixing the adjusting screws are the most common:

Strong vibration or damage to a protective cap. This rarely happens, but still happens.
Serious engine wear (piston). Of course, in this case it is better to take care of repairing a chainsaw, but at the same time, adjusting the carburetor can improve its functionality for some time.
Litter in a carburetor because of the low quality of gasoline or due to the formation of scale. In this case, in addition to adjusting the carburetor, it can be avoided.

The market presents a wide selection of trimmers from various manufacturers. They are characterized by general reasons why the moment. Each unit is also equipped operating instructions. In it, the corresponding section contains the necessary recommendations on this issue regarding the applied model.

If, in the process of independently eliminating problems, it was not possible to achieve a positive result, then it is better to seek help from specialists. It should also be involved in solving the problem of professionals in the absence of minimum experience and skills in such a case as not to harm. The most difficult node is the engine. Only experienced masters are permissible to work with him. When the lawn mower is on warranty service , The best option is to contact the service center where they will diagnose and repair technology.

When purchasing a lawn mower, you must be prepared for the fact that, as in all other similar tools, breakdowns may also appear in it that will require repairs.

But do not immediately run to the service center and pay big funds to the craftsmen who convince you of the presence of severe malfunctions in the device.

The lawn mower stalls at high speeds

Perhaps more and more a widespread complaint associated with gasoline trimmers sounds like this: “The lawn mower stalls”.

Naturally, a rather harsh fault may be a prerequisite for this. The lawn mower does not develop speed.Why is a Chinese lawn mower not gaining. The lawn mower does not develop speed, why the Chinese lawn mower does not develop momentum. But in most cases, the situation is even easier than it seems to be the 1st gaze.

In fact, circumstances, this is when the lawn mower stalls at high speeds. There are quite a lot of these circumstances.

Another is the presence of defects in the power system.

In this case, the lawn mower will stall at idle. I did not give any tangible result. Why is a Chinese lawn mower not developing momentum. Why does my lawn mower not develops momentum. Why the lawn mower. I can’t from the ground.And the revolutions are gaining from the floor. Dilems with the power system may lead to a drainage or incorrect carburetor adjustment.

Low quality fuel use

The benzotrimer does not gain speed in case of poor.quality fuel. He may stop or not start at all. To check the quality of the fuel, you need to inspect the candles. They are the main indicators for solving problems with the combustion chamber.

In the presence of sediment, a raid, plaque, the old fuel merges, and another, high.quality.

or gasoline cutter should be filled with good quality gasoline and the fuel brands that the manufacturer indicated in the technical passport of the device.

For your information! Candles should be thoroughly cleaned of plaque, and only after that they are again placed in the combustion chamber.

What to do if a benzotrimer is not gaining momentum

If you once purchased a trimmer for grass, working with gasoline, then you probably had to face the problem of turning on a trimmer for grass, as well as a problem as a benzotrimer does not gain momentum

That is why this article has been created.

Fiskars Reel Mower Update

So, what to do if a trimmer for grass, working for you for several years, suddenly just stops gaining momentum

, and the motor is simply stalling? In this case, you and I should consider a number of problems related to stopping the work of the motor.

The motor may stall under various circumstances. The lawn mower does not develop speed, the reason. | Funnycat.TV. Sometimes the reason for the incorrect operation of the trimmer for grass working from gasoline is the clogging of the air filter.

It is the filter that is one of the most important reasons why the operation of a gasoline trimmer for grass may stop

Various garbage very often gets into it, particles of dust that also clog the filter, so it needs to be cleaned and washed every month, and maybe more often, it all depends on what power the gasoline trimmer has for the grass, as well as then how often do you use this device.

Immediately after you started

To another reason why the trimmer for the grass starts and immediately stalls, the fuel valve can be attached. To restore gasoline circulation in the fuel system, it is enough to dismantle the valve and eliminate pollution.

The problem may be a malfunction of the ignition module, but with such a malfunction it is best to contact a specialized center.

The trimmer stalls for the grass: the causes and elimination of the problems of Was Last Modified: July 22nd, 2021 By

Read angular grinder with a revolution regulator 125 choice

The unit can stall immediately after the launch, if the carburetor is sipped or incorrectly configured. this causes an uneven supply of fuel. The result is that the device begins to vibrate clearly. To eliminate problems, the carburetor is reconfigured, acting according to the instructions for the mechanism.

The engine also stops when the valve supplies fuel clogs. In such cases, it is enough just to clean it. If the lawn mower at first earned, but then immediately stalled, then possible fuel to the carburetor unit enters some difficulty. The weakening of the valve helps to solve the issue, which provides free circulation of the mixture in the system.

The stop can also be caused by air leaks in the presence of mechanical damage to the hose (holes, cracks) that fuel fuel fuel. In this case, the drive should be added to the drive to quickly drive air bubbles from the system.

User manual

Particular attention should be paid to how to properly carry out the first start and run.in gasoline mowing. Competent actions will allow the maximum operation of the trimmer for the grass and reduce the costs of its maintenance and repair

Before you first start the device, you will need to carry out several preparatory actions. Their list includes a visual assessment of the state of the gearbox and the preparation of a high.quality fuel mixture, taking into account what kind of oil should be poured in accordance with the instructions and recommendations of the manufacturer.

It is on the composition of the fuel that experts and experienced owners of gasoline trimmers recommend fuel. In situations with two.stroke engines, unlike four.stroke, components will be gasoline and oil

Read how to unscrew the clutch on the Stihl chainsaw

The proportions are indicated in the relevant instructions attached to the technique, or on the labels of combustible materials. In annotations, among other things, the type of fuel and motor oil recommended by the developers indicates.

After all the nodes of the trimmer for the grass are examined and the fuel is properly prepared, you can proceed directly to its launch and the subsequent run.in the ICE. This process includes the following steps:

The lawn mower must be placed in a horizontal plane on the maximum flat surface;
The lever that controls the air damper is transferred to a closed position;
Using a primer, fuel is pumped to the carburetor (several movements are enough);
the ignition is turned on by the corresponding switch;
The launch cord should be pulled out as smoothly as possible until the resistance is felt;
the launch of the device is carried out by several sharp jerks of the cord;
After the engine has started, you should open the air supply.

In some situations, a trimmer for grass may not start or immediately after starting to stall. In such cases, it is necessary to slightly open the air supply to the carburetor and repeat the attempt. After a positive result, you should let the motor work at least 5 minutes in idle mode.

Using the lever, the air supply should be set in such a way that the reel with a fishing line or the knives remain motionless. After the full heating of the motor, the damper is opened by the transfer of the aforementioned lever into a position marked by the ON badge, and for 20-30 seconds, the gas regulator is half-clamped. At the next stage, the trigger is released, and the trimmer for the grass works at idle for approximately 40 seconds. Such manipulations are repeated for 10-15 minutes, after which it is necessary to take a 20-minute break.

Repetition of the listed actions is further running in the ICE of the gasoline mowing. The next stage is the reducer of the gearbox, for the implementation of which you will need to choose the appropriate area with soft grass. The latter is mowed for 5-10 minutes with periodic pits (1/2-2/3 of the maximum revolutions). This cycle is repeated several times with an interval of 20-25 minutes.

Sooner or later, the owners of the trimmers have to deal with the need to change the fishing line for the trimmer. This is an integral component of the operation of such a technique. There are several ways to update the considered cutting element. The easiest option is the following manipulations:

Remove the head from a trimmer for the grass and carefully clean it;
reinforce the required fishing length (it is recommended 2-3 meters) and bite it off with nippers;
bend the fishing line for the trimmer so that one end is 15 cm longer than the other;
Place the jacket on the spike located between the grooves of the coil;
wind a fishing line for a trimmer simultaneously in two directions, temporarily fixing it in grooves (the winding direction is indicated by the arrow);
pass the ends through special holes in the lid;
insert a coil with a new fishing line in place and snap.

Often in the operation of the Stihl lawn mower, a carburetor adjustment may be required. In the presence of appropriate knowledge and skills, it can be carried out independently. At the preparatory stage, you need to thoroughly rinse the air filter. It is worth noting that this is strongly recommended to do every ten hours of operation of the mowing.

Setting is carried out by three screws, one of which is responsible for supplying fuel. It is twisted until the internal combustion engine starts to stall. Then you should unscrew the screw for a quarter of turning (if the engine stalled, then by 1/2). After starting the trimmer for the grass, they continue to turn off the same screw until the ICE begins to work stably at increased speeds.

The lawn mower stalls hot? There is a solution!

The lawn mower stalls hot-this means that there is already a certain amount of fuel for starting the engine, but after 5-10 minutes of operation, it stops working in the engine. This motor behavior indicates problems with the fuel filter.

This article will solve the case of a gas station when they stall at large gas speeds

When purchasing a lawn mower, you must be prepared for the fact that, as in all other similar tools, breakdowns may also appear in it that will require repairs.

But do not immediately run to the service center and pay big funds to the craftsmen who convince you of the presence of severe malfunctions in the device.

The lawn mower stalls at high speeds

Perhaps more and more a widespread complaint associated with gasoline trimmers sounds like this: “Lawn mowl

Naturally, a rather harsh fault may be a prerequisite for this. A two.stroke trimmer engine for grass does not develop turns stalling. lawn mower FS 130 give gas stalls. But in most cases, the situation is even easier than it seems to be the 1st gaze.

In fact, circumstances, this is when the lawn mower stalls at high speeds, there are quite a lot of these circumstances.

Why is a Chinese lawn mower not developing momentum?

gaining momentum. very frequent inconsistency and of course always has a common solution.In this.

Features of the work of a trimmer for grass

All trimmers for grass are classified according to the type of power: gasoline or electricity (electric network or battery). It must be emphasized that gasoline mowers in almost everything prevail their electronic and battery colleagues. Although they all make similar functions, differences in performance, dexterity and effectiveness are very noticeable. But the general mechanism of the work of all types of manual braids is practically the same as devices equipped with engines (two- or four-stroke internal combustion engines or electric motor), which drive the cutting installation (reel from the fishing line or iron disk). All elements are fixed on a straight or curved strip, including a trimmer handle for grass, on which the main buttons are placed.

Since the inconsistent of low revolutions is more often found with gasoline variations of the finish, they will pay more attention. So, the shield is very comfortable to use and is undemanding in maintenance. over, most of his defects are caused by the ignorance of the user of simple things, which are written in the instructions. Therefore, before starting the operation of the device, you should closely study the management of the manufacturer. Namely, to start the motor, you need to perform subsequent steps:

turn on the ignition button;
Press the silicone button a couple of times to pump gasoline;
close the air damper;
set the lever of the throttle in the position of the highest speed;
At first, make light jerks with a starter handle to feel the resistance of the motor, then sharply with a jump.

If the brush starts, but hung, it is necessary to put the air damper in the middle position and experience it again. When the engine starts to work, you need to slow down the gas and open the air damper for you, since the trimmer for the grass only works at the entrance.

Fundamentally! From how the trimmer for the grass works, depending on different influences of the environment. In hot weather, the device should give more time to cool down. When working in dense thickets or with the highest vegetation, the engine also overheats. Make five-minute breaks every 15-20 minutes.

Sources:

https://msmetall.ru/instrumenty-i-stanki/motokosa-ne-nabiraet-oboroty.html
https://msmetall.ru/instrumenty-i-stanki/benzokosa-ne-razvivaet-oboroty-glohnet.html
https://1-tools.ru/abrazivy/trimmer-ne-nabiraet-oboroty.html
https://novomoskov.ru/salon/dvigatel-benzokosy-troit-ne-razvivaet-oboroty-benzokosa-ne/
https://novomoskov.ru/tormoznaya-sistema/trimmer-pod-nagruzkoi-ne-tyanet-pochemu-benzokosa-ne-razvivaet-oboroty/
https://novomoskov.ru/rulevoe-upravlenie/benzokosa-ne-nabiraet-oboroty-pri-polnom-gaze-benzokosa-na-holostom-hodu/
https://nordtool.ru/dreli-i-pily/pochemu-trimmer-ne-nabiraet-oboroty.html
https://1-tools.ru/na-strojke/glohnet-trimmer-shtil-55.html
https://delta-instrument.ru/dreli-i-pily/trimmer-ne-razvivaet-oboroty-prichina.html

Lawn Mowers gaining, lawn, momentum, mower