The spark is missing on the Oleo-Mac lawn mower. What to do if a gasoline lawn mower does not start
Remove the starter of the engine of the Lawn mowed by SPARTA 25
Repair of the starter of a gasoline trimmer for grass may be required at the most inopportune moment. In this case, you can solve the problem in two ways: replace the broken part or change the entire node. The latter option will cost more. To repair the device with your own hands in most cases, you need only a screwdriver with an appropriate tip from the tools. Repair work will not take much time and do not require special knowledge. It is enough to know the device, the principle of operation, the nuances of the assembly-disassembly of the starter on the trimmer in order to achieve the desired positive result.
The device and principle of operation of the starter on the trimmer
The gasoline engine is, in principle, the main part of the motorcycles its power lies in the range of 0.5-2.5 liters.With. The movement from it is transmitted by the shaft located inside the hollow bar, and then through the gearbox, consisting of gears, already a fishing line or a knife (working body).
Also, the lawn mower has the following elements:
- protective casing;
- a belt designed for ease of use of the device;
- Starter serving for launching a gasoline internal combustion engine.
All parts of the motorcycles are presented in the photo further.
The starter on the trimmer is an integral part, which performs the engine starting into operation. It is shown separately in two photos below.
The starter mechanisms of various models of the benzos work according to the same principle: during the launch of the ICE, the protrusions marked in the photograph above the number 1 are included in the hook with dogs 3. When the engine begins to work, they return to their previous position due to the effects of centrifugal. Similar role is also played by wires 2.
What To Do With Your Lawn Mower In Winter. Ace Hardware
The process of returning to the initial position of the elements of the mechanism occurs due to the presence of a spring screwed around the axis. It unfolds when the rope is pulled. After releasing the cord, it is drawn and winding due to folding the spring. During the launch of the ICE of the lawn mower, the triggering mechanism turns its shaft until it starts to work (starts).
To date, gasoline motorcycles are equipped with two types of starter mechanisms:
The first option is much more common.
The starter on the trimmer can function without breakdowns for a long time. It is impossible to unambiguously indicate the deadline. Everything is determined by the initial quality of the device and compliance with the rules of handling it.
Oleo-Mac Sparta 25 gas station is missing
Italian company “Oleo-Mac” is the favorite of the Euro consumer market for the sales department of garden technology. The company began its active activity in 1992, when it merged with the EFCO concern. Today, Oleo-Mac‘s visitor, you can safely call a trimmer for the grass “Oleo-Mac Sparta 25”, which is made of various models and capacities.
Oleo-Mac Sparta 25 lawn mower is comfortable and ordinary in operation. Even a lady or a child will be able to cope with the management of the unit. The area recommended for the mowing by the plant is recommended in 15 acres. The stronger model “Sparta 37” produces mowing within the range, which is 20 acres. Thanks to the innovative bearings, installed in the Oleo-Mac Sparta 25 benzocerus reduced the level of noise and vibration to the limit. In addition, these bearings do not need lubrication.
This gasoline model is designed only for the most demanding buyers who want to see the aggregate exact technical properties. Thanks to the engine, which works in two.stroke mode, a trimmer for grass can be operated in a saturated mode. It is completely suitable for mowing thick grass and the highest weed.
The unit belongs to the level of professional equipment. Specifically it is made by the brand the longest. This fact is caused by the fact that the trimmer for grass is distinguished by subsequent advantages:
- the highest performance (a box made of Aluminium withstands huge loads);
- Large power (2.4.1 horsepower);
- makes both the mowing of grass, weeds, and a cut of the bush (there is a chance of installing a special knife);
- The economy of the motor (a flooded tank is enough to work for a period of 45 minutes).
The model is not whimsical and does not even ask for a common repair. Now such an unit is not a luxury (luxe), but the need for many personal owners and communal prems.
Repair trimmer for grass Stark 25
Probably the owners of the trimmer for the grass are wondering: “Do I often need to lubricate the unit?””. The answer to the question is specific: “Yes!””. Each detail makes its own function, when working, they are subjected to thermal and mechanical stress, because it remains to make our client the places of contact of the parts must be often lubricated.
As technical lubricant, both a watery consistency and half.liquid, both are also called the type of suspension. For detailed information, you need to contact the annotation from the manufacturer’s factory.
Oleo-Mac Sparta 25 gas station is missing
The well-known Italian brand Oleo-Mac was founded in 1972 by Arielo Bartolly. From the very beginning of its existence, the enterprise began the active development of high.quality agricultural machinery. At the same time, the company not only set up the production of its own high.quality technology, but also took up the active expansion and popularization of its brand in the world. As a result of an effective policy, in just 20 years, the Italian manufacturer was able to redeem the control packages of shares of 30 smaller enterprises, and successfully combine them into one large industrial holding.
Today, Oleo-Mac is engaged in intensive production of cultivators, gasoline and electric chain saws, lawn mowers. Separate attention among all products of the company deserve gasoline trimmers for grass from the Sparta line. From their market analogues, they are stable when working under variables and constantly high loads, ease of maintenance and a long.term working resource. Another important advantage is the relatively low price of Oleo-Mac Sparta motorcycles. This makes it possible to purchase high.quality Italian technology to anyone who wants.
Reviews about Oleo-Mac Sparta 25
Advantages: comfortable, light, gasoline does not spend it very, safe.
Comment: I take care of my site carefully. This lawn mower became a reliable help. Easily copes with vegetation. You can additionally install a bitch. Starting the first time.
Advantages: assembly quality. There is nothing to complain about. The necessary tool includes. Poster perfectly.
Disadvantages: I will not generalize. I got a problem with a candle. Since candles for benzos are not sold in every Selpo, it took too much time to eliminate
Comment: The instruction is certainly overloaded (3 models in one), but I personally did not cause any particular difficulties. Here the initial launch caused a problem, for about 20 minutes he sorted out various options for the position of the damper and the gas key while it started up. Podged half an hour. He stopped once, on the hot started up “from Poltychka”. Three hours later I was going to continue. She refused to start. He turned the candle. Wet. Put on the wire, pressed the candle to the case, pulled the cord. Sparks are not visible. By the way, Torch candle. I have never heard of this. The next day I went, bought a new. Again I had to play with the damper and gas, but no more than a couple of minutes. After that he was bitten by everything where he did not climb with a lawn mower (hundreds). Excellent. We are already collected from us, judging by the manufacturer’s seals in the warranty coupon.So far, I put 3 stars, because the candle greatly ruined the impression. Husqvarna’s lawn mowed immediately and no emotions, except for great pleasure, did not cause. Let’s see what will happen next
Advantages: high quality, the best in its class.
Disadvantages: heavy for its cubature, vibration, high cost of spare parts and repair.
Comment: worked this oblique nine seasons. Kosha approximately hectares per season. I spent a hundred liters of gasoline [two bottles of oil]. With a scythe, no problems, replaced only the fuel filter and the comb, which he broke about the stump. Average consumption 1 liter of gasoline per 10 acres. The starter is located in front. Completely start the shoulder. There are enough power, but backward, without stock. The gearbox is strong and reliable, survived 20 strokes on stones and stumps, though the disk was bent over with chamomile. It always starts without problems. As far as I know, this is a semi.professional mower. Does not overheat, you can safely work out the gas gas in the floor in any heat. In this price range, this is the best choice, at least it is a cut above its main competitor. Khuskvarna 128. Feel free to take it to care for a plot of no more than 20 acres, if more, I would recommend looking at other 35 cubes mowers. Now I sell it because it became necessary to mow large areas and I was missing power.
Advantages: perfectly mows only fishing line with a square section. It starts to hot with a half. very cool.
Disadvantages: for some reason it starts to be bad for some reason, maybe I have not yet been embarrassed. The paraphernal belt could also include in the kit, as well as a funnel and a canister for mixing gasoline. The vibration is tangible.
Comment: after an electric trimmer for grass, this braid for grass is just a fairy tale. I cut 10 acres never shut the grass on the reel and did not block it. Although grass is 1.5 meters high and nettle. a fishing line for a trimmer included high.quality, but it is not enough. Buy fishing line for a trimmer only with a square section. mows gorgeous. The rest of the fishing lines stick together inside the coil, even a native fishing line for a trimmer twisted Silent. Be sure to buy headphones, after a whole day of the mowing, the right ear stalls a little. Glasses or mask are required. will fly into the eye will not seem a little. Vibration is very noticeable, but you get used to it. Beautiful braid for grass, impressions are only positive.
Advantages: A wonderful thing. I myself did not expect
Disadvantages: what disadvantages can be after seven years of use? Last fall, the cord is confused. Began to start on cold.
Comment: Seventh season of operation from the first to the last grass. The braid for the grass is constantly at work. The site is huge. To everything, the wife mows a row in strawberries, potatoes (15 acres). Advice. Do not forget to fill the lubricant into the gearbox every spring. Buy a fishing line for a only round section. I refuel 95m gasoline from the first day. The oil is very strict. 20 cubes (syringe) per liter. Do not overheat, let’s cool her.
Advantages: It copes well with hard grass and weeds. Economical in terms of fuel. 1 refueling is enough for 12 acres. The handle is comfortable, T-shaped. The trimmer for the grass is not heavy, I have 6 acres, my hands do not get tired of holding, sometimes even my wife begins to mow
Comment: The kit includes a knife and a fishing line for a trimmer. I put a fishing line for a trimmer when you need to mow the lawn grass. A knife for more complex tasks (for high grass and weeds). Get better according to the instructions. I used the whole last season intensely, two times a week, I did not let Nirazu.
Advantages: very light, comfortable. I have been using 7 years, I have been mowing 2 hectares per year.
Disadvantages: Twice changed the full carburetor. There is no longer such traction as it was before, you need to change the ring
Advantages: easy and quiet, hands do not get tired.
Disadvantages: starting through dancing with tambourine. The engine is weak for thick grass.
Read how to assemble a trimmer for the grass of Parma BTK 052
Comment: I bought back in 2014 for 9 with a penny of thousand. After the Chinese “Zenith” 2 l.With. This is a heavenly pleasure. Easy, there is no vibration from the word at all. After the Chinese, his hands tinged for another half days. Nothing rattles and does not unscrew. The muffler is made correctly. for a kosar, she works quietly. The factory is comfortable, you can even remove the belt without removing.But the engine 1 l.With. Weak. Flower beds mow the very thing, but if the grass is high, then the braid for the grass gets in. It is necessary either in two passes (first half then under the root) or disk. The disk, by the way, mows very well on small gas.It did not build that it should be started on a cold on a special. And if I missed something or then he sunk it, then it is very difficult to start.I was used to starting cold 2t engines like this: I pumped up, pushed the damper and backup. From the second or third time everything starts up.And this braid for grass has an additional position of the damper and gas fixation. it is important. So start the cold as it is written in the instructions.
Advantages: mows wonderful, with wormwood and nettles copes with a bang with a fishing line
Disadvantages: Very strong vibration.You have to pull out a fishing line for a trimmer with your hands (although we can wrap it somehow wrong)
Advantages: high-quality materials, nice to hold in your hands, a comfortable T-shaped handle, power 1 liter.With. more than enough. Compared to an electric scythe 1500 watts, this seems much more powerful. Assembly tools are attached.
You need to do a little research. Acceleration of the device is initiated. It is necessary to assess the serviceability of the engine at maximum speed. When the engine works, this means that pressing an accelerator develops speed up to 15,000 rpm.
If this does not happen or the speed increases too slowly, the screw with labeling L should be used. He rotates counterclockwise. Moderate movements should be observed, since the turn should not exceed 1/8 of the full circle.
How to set up maximum speed
To limit this number, you must use a screw with marking h h. To increase the number of revolutions, turn it clockwise and reduce counterclockwise. The maximum frequency should not exceed 15,000 rpm.
An increase in this value will lead to stopping the engine engine, which will cause problems in the ignition system. The rotation of this screw should take into account the processes of ignition of the device. If you have the slightest malfunction, the maximum speed should be reduced.
What is a sapun and how it affects the causes of the impossibility of starting a chainsaw
Few people know from sawmills about the existence of such an element on a chainsaw as a sapun. This is one of the important details of the tool that is responsible for balancing the pressure in the fuel tank. The principle of operation of the cabin on the chainsaw is that when the amount of fuel decreases in the tank, a vacuum or vacuum occurs. The smaller the fuel in the tank, the higher the magnitude of the pressure, which becomes an obstacle to the passage of fuel into the carburetor. To reduce the pressure in the tank, a saapun is used, which is a valve that passes the air in one direction.
If the intake hole of the cabin is clogged, then the air does not enter the tank, which means that the pressure begins to increase. There is a saepun on the lid of the fuel tank of the chainsaw (depending on the model), and if the two.stroke engine engine does not start, it is necessary to check the serviceability of the saapon. Moving in the malfunction of the soundtress is quite simple:
- Unscrew the gas tank cover. If air is pulled, then this indirectly indicates a malfunction of the pressure regulator
- Twist the gas tank cover, then repeat the attempt to start the motor. If the motor starts up, but after some time the work stalls, then the sapun needs to be cleaned
- There is another way to check the serviceability of the saapun. disconnect the fuel hose from the carburetor. If fuel does not intermittently flows out of it, then the device is properly. If the stream is weak and intermittent, then you need to clean the cabin on the chainsaw to start the engine
Sapun (fuel tank cover valve) is cleaned using a needle. If the cabin is buried strongly, then you will need to remove the filter element, and clean it. On different models of chainsaws, the location of the soundtress differs (on most models it is in the gas tank cover). Below the video shows the process of cleaning the soundtress on the example of the chainsaw of Husqvarna.
Graduation channel or muffler cleaning and impact on engine start
During the operation of the chainsaw on the walls of the exhaust channel and muffler, tarry deposits are laid. soot. Periodically, this dozen must be cleaned, but most of the tool owners recall this only after the chainsaw does not start. Why is this happening? The reason is that the burned products have nowhere to go, so the engine will not be able to start. When the exhaust channel is polluted, the chainsaw not only loses its power, but it also takes place independently of its stopping engine operation.
Deposits on the walls of the silencer arise as a result of such factors:
- Using low.quality gasoline and oil
- Incorrect ratio of gasoline and oil when preparing the mixture
- Long operation of the tool without preventive measures
With cleaning the muffler of the chainsaw of difficulties does not occur. The sequence of cleaning actions has the following view:
- To get started, the screwdriver mounts are displayed
- The cooling panel with a sealing gasket is dismantled
- Next, you need to remove the sparking
- The resonator body is disassembled
- Cleaning and washing of all elements from soot by kerosene or other cleansing liquids is carried out. This must be done exclusively in a respirator and glasses. Carcinogenic substances are very dangerous for humans
- Wait for the drying elements to dry
- Assemble in the sequence of reverse removal
When the walls of the exhaust channel will be cleaned, it is necessary to close the cylinder hole with a rag. This will exclude the likelihood of dust and sand. After cleaning the muffler and the exhaust channel of the chainsaw, you can proceed to start the tool engine. In this case, you will feel how the chainsaw will work at full power.
The structure of the lawn mower
Before repairing the device, it is necessary to understand what it consists of. There are many models of garden technology of different brands: self.propelled, self.propelled. They are all the same. Construction components:
- Platform on wheels;
- Gasoline engine (starter, carburetor, ignition and fuel supply system, air damper, filter, piston system, fuel tank.);
- A pen;
- Water.jet nozzles;
- Cutting elements (knives);
- Grass collector (container);
- A section of cutting fresh grass;
- Buttons, control levers;
- Corps (aluminum, steel, plastic).
The muffler of his clogging and the inability to start a benzotrimer
What else can be the reason that it is impossible to start a benzotrimer engine? Even before resorting to more cardinal actions, you should check the serviceability of the muffler or exhaust channel. This does not apply to new trimmers that have practically no special development. If the trimmer has been to the trimmer, and the tool has not been subjected to diagnostic measures, then the muffler is checked.
If the lawn muffler is clogged, then the exhaust gases have nowhere to go out, and therefore it is impossible to get the engine. In an instant, the exhaust channel cannot be clogged, therefore, the day before such signs should have been manifested:
- An increase in the sound of the motor, which is associated with overcoming high resistance with exhaust gases to release them
- Black smoke from a muffler is a dozen that settles on the walls of the exhaust system
- Unstable engine operation
- The motor stalls on its own when working at idle
Exclude or confirm this factor by inspecting the exhaust system. If the anti.icing mesh has significant clogging, then the reason for the impossibility of starting the engine is undoubtedly in the exhaust channel. The mesh must be cleaned, only this must be done carefully, since the black carcass is a very dangerous carcinogen that can provoke serious diseases of the human respiratory system. To clean the anti.icing mesh and muffler walls of the trimmer for grass, special tools should be used, and work using protective equipment.
The lawn mower is not started? Eliminate the most common reason
Chinese motorcycles headache for the owner, but still without them nowhere. The main problem is the difficulty of starting after a long downtime. If the lawn mower worked as a clock in the fall, but it does not start in the spring, then you must most likely disassemble the carburetor and clean its valve.
If the motor motorcycles refuses to start, then first of all you need to check the candle. If it is completely dry, then this means that the fuel is not supplied to the combustion chamber and the reason is in the carburetor. Immediately it is worth checking the candle and for the subject of a spark in order to exclude it from the reasons on all fronts.
You can also make sure that the motor itself is serviceable. To do this, having twisted the candle, you need to pour a syringe into a combustion chamber of several milliliters of gasoline. After this, the candle is twisted and the lawn mower is started. If everything is in order with the motor, then it will work for a few seconds. This will once again confirm that it makes sense to disassemble the carburetor.
Next, a plastic protective cover is removed along with an air filter. After that, 2 screws are twisted with a cross.shaped screwdriver, holding the air damper and the carburetor on the engine. Fuel tubes immediately break down.
From the side of the cap of the suction, you need to twist 4 screws with a screwdriver, and divide it into 2 halves. We are interested in half with suction. There is a valve from its inside in the center.
He often sticks out, because after evaporation of gasoline, with a simple on it, a viscous oil works as glue. To check it, you need to put a short thin tube and try to blow the air through it. If he is stuck, he will not be able to blow out in any direction.
Caliping of the valve is eliminated by a conventional match. Toothpicks are better not to use, since they are sharp and can harm. A match must be slightly rested on the valve and stir it. After cleaning the match, it will be blown up.
Fuel will be able to act, so it will work. Cleaning the valve is not a panacea for all motorcycles that do not start after downtime, but this helps in 8 cases out of 10. The remaining 20%, as a rule, are also associated with a carburetor, usually with a needle.
The lawn mower starts poorly? Adjust Magneto’s gap
As the experience of operating benzos, in particular Chinese production shows, they often have problems in the launch system, so they are often difficult to start. Problems are usually related to the flywheel magneto.
For those who are unfamiliar with this unit, we remind: this system consisting of ignition coil, spark plugs and flywheel with magnets. We have to deal with the clearance of Magneto, more precisely, with the gap of the ignition coil and its guaranteed exhibition. It is because of it that problems arise in Chinese units, which for several years were operated in domestic conditions or in the conditions of the Housingire. But it happens that even in new products it is difficult to start, especially for cold. And in this case, usually problems with the launch are related to the gap of magneto. Most people who operate the lawn mowers expose the Magneto gap of 0.4 mm, as recommended by many manufacturers. What will happen if this gap is adjusted and set 0.25 mm? It turns out that when it is reduced, the electric spark becomes thinner, smaller and practices every beat even with slow speeds of the Magneto flywheel.
That is, consciously reducing the gap, we thereby increase the likelihood of a normal launch of the lawn mower without any excessive physical exertion and shortness of breath even when starting a cold engine.
Gap and procedure for its exhibition in different cases
As a template, a strip of the required width and length carved from a conventional plastic bottle, for example, from under Pepsi-Cola, can be successfully used to put a gap of magneto.
It is only necessary to install it last, so as not to damage when carrying out repair work, using the same hair dryer for any purpose. After all, if it is crumpling from the effects of hot air, then there is no need to talk about the accuracy of the gap of Magneto. It is with the help of a spacer carved from a plastic bottle that you can with high accuracy set the Magneto gap 0.25 mm, since its thickness is exactly the same. To make sure of this, it is enough to fold the strip four times and measure its total thickness with a caliper, which will be exactly 1.0 mm. We put a spacer cut from a plastic bottle on the magnets of the Magneto flywheel, set the ignition coil in place and fix it with strong bolts of 8 by 8, after filling the holes with a thread on the case with a threaded latch.
We apply it on the bolts, twisting which, you must not forget to fix the terminal of the mass. It is better to use an electric screwdriver at the same time. We squeeze the bolts with a regular hand screwdriver with a hexagonal bat to the limit, since the use of a M-shaped hexagon can lead to a breakdown of the faces of bolts.
It remains, turning the flywheel with magnets, remove the plastic spacer and, continuing to rotate it, check the quality (uniformity) of the clearance when it turns from 0 to 360 degrees, which, with this approach, is ideal. Some use the Magneto’s gap folded by half a photochex leaf, which is also permissible, but the use of a spacer from a plastic bottle gives the best result. over, it can be used reusads dozens of times.
Lawn Mower Will Not Start. You Will Never Guess Why
It remains only to install body parts and you can run the engine to test how it starts and works. Sometimes during operation, the ignition reel reels are deformed to the magneto housing, which does not allow you to reliably install it, since the holes in the coil and on the engine body do not coincide.You can, of course, try to straighten out the defect, but it will be more reliable to put a new coil, especially since it is not too expensive.All further actions are similar to the above case, unless the heads of fastening the spark plots can not be under the hexagon, but for the wrench and the cross.shaped screwdriver. But this does not change the essence of the matter: the tightening of these bolts should be guaranteed to be reliable, as in the first case. To evaluate the quality of the work done, it is necessary to make sure there is a spark between the electrodes of the candle visually after the final assembly of the engine. To do this, we connect it to the mass and begin to turn the engine using the starting device of manual or electric. The check for the spark has one nuance. If you sharply pull behind the kicks starter, then the spark will appear even with slightly faulty magnets of magneto and even completely non-working ignition coils. In this case, the presence of a spark is not yet an indicator of the serviceability of the ignition system.The quality of sparking can only be judged by its appearance, when the flywheel Magneto does not rotate too quickly, for which the kicks starter should not be pulled, but evenly and not to pull.
Only in this case, the engine of the benzotrimer or chainsaw will be started without problems, both in the morning and throughout the entire working day (respectively, the so.called hot or cold launch). If there is no spark with a slow movement of the starting device, then, most likely, you will have to change the ignition coil, set the gap of magneto or change the candle.The practice of putting a gap on benzos and chainsaws described above for five years has justified itself completely. There have never been complaints from users after such a repair. This really helps when starting not only Chinese gasosos, but also European and even branded. At all units, regardless of the manufacturer, putting the Magneto clearance 0.25 mm instead of 0.40 mm recommended by manufacturers, gives excellent results. Some people offer gaps 0.10-0.15 mm, but this. After all, there is a certain thermal expansion of the parts of the ignition system, the housing itself, the gas mower or chainsaw crankcase, and such a small gap can disappear altogether, which can lead to breakdowns (burning out), first of all, the ignition coils. Therefore, a gap of 0.25 mm is from all points of view optimal.
The trimmer for the grass is not started due to the malfunction of the carburetor
One of the most difficult reasons for the impossibility of launching a lawn mower is a carburetor. This mechanism is responsible for the preparation and good supply of the fuel-air mixture to the cylinder. If the carburetor is clogged or adjusted incorrectly, then the lawn mower may not start or work unstable. Detailed instructions on how to adjust the carburetor on a benzocosa is described in this material.
If the adjustment does not help restore the stable operation of the tool engine, or the trimmer for the grass does not start at all, then the carburetor should be removed and repair it. The entire repair of the carburetor is that you need to disassemble it, clean all channels and constituent elements. If necessary, replace the failed details. membranes, filters, etc.P.
If the suspicions fell on the carburetor, then you should pay attention to the following types of malfunctions:
- Canals and nozzles clogged. special liquids can be used for cleaning, however, it is best to disassemble the mechanism with its thorough flushing. The reason for the clogging of the channels and jackets of the carburetor is the storage of a tool with fuel in the tank
- Wear of the carburetor gaskets. rubber seals contribute to the fact that the tightness of the mechanism is disturbed, as a result of which the serviceability of the functioning is violated
- Memory of carburetor membranes. they are responsible for downloading fuel to the device
To make sure the CPG malfunction, you should check the compression, which is described above.
How to store a lawn mower and exclude problems with its launch
Its launch depends on the correct approach to storing a trimmer for the grass. over, this applies not only to winter long.term storage. How to store a trimmer for gasoline grass in order to warn yourself against problems with the difficulty of starting it, it is necessary to take into account a number of the following recommendations:
- Before you remove the tool in zipun for winter storage, you should drain the fuel from the tank. In addition, the remaining fuel is also required to remove, and this can be done by starting the engine, letting it work for a while until it stalls
- Store the tool preferably in a dry room
- Before starting the engine after a long pause for more than 2-3 months, you must first examine the candle electrodes, as well as check the main nodes-air filter, high-voltage wire, etc
- When operating the tool, it must be borne in mind that overheating of the motor negatively affects the operational resource, so you need to take breaks when working, especially if a trimmer for grass with a two.stroke engine is used to work. Units with four.stroke engines are not only more powerful, but also more hardy
- After winter, the first thing you need to do the following. pour a little oil into the candle hole, having previously moved the piston to the extreme dead point. This is necessary in order to lubricate the parts of the CPG when starting the engine, thereby excluding their quick wear
Only with the right approach to finding the reasons why the trimmer for grass does not start, you can independently find and eliminate the breakdown. over, for this you do not need to be a specialist at all, and to understand thoroughly in the design of gasoline units. Act in order in the sequence, which is presented in the material, and restore the performance of the lawn mower will be easier.