Trimmer calm fs 38 how to fill the line

10th May 2021

Benzokosa Calm Fs 38 How to Refill the Line

Stihl manufactures various cutting tools with gasoline and electronic engines: chainsaws and saws for special purposes, brushcutters, electronic scythes, brush cutters, lawn mowers, and of course drilling tools, washers, sprayers and other equipment. The company was based in Germany and currently has consulates in 160 countries.

Benzokos Calm you will like more different power and purpose: from a light trimmer for trimming the lawn to a large massive professional tool. Next, we will consider several of the favorite models of the Stihl petrol cutter.

Lightweight petrol cutter Stihl fs 38 type “portable trimmer” is suitable for lawn care and lawn mowing in small areas.

Technical properties of the fs 38 model:

power. 0.9 liters. from.,
engine volume. 27.2.7 cubic meters. cm,
two-stroke engine,
weight. 4.1 kg,
tank size. 0.33 l,
working part. AutoCut C5-2 head,
plowing width. 255 mm,
easy start system,
primer.

Stihl FS38 Line Trimmer Spool Rewind

The bar is curved, there is also a D-shaped handle, which is easily adjusted and installed in a rational position. Includes glasses.

The Stihl fs 55 gas cutter is well suited for everyday tasks on a suburban area: mowing grass around trees, trimming lawns, fighting weeds with snowballs. She can mow old hard grass, nettles, reeds, thin bushes.

power Stihl FS 55. 1 hp.
engine volume. 27.4.5 cubic meters. cm,
two-stroke engine,
weight. 5 kg,
tank size. 0.33 l,
working parts. knife, fishing line,
processing width. 420 mm for the line and 255 for the knife,
primer that pumps fuel into the carburetor for a quick start after idle.

How to correctly change #cord (line) on the trimmer \

The set includes a strap for two shoulders, goggles to protect the operator’s eyes. The bar is even, the handle is “bicycle” and is adjusted using a screw.

The Stihl FS 130 brushcutter is equipped with a 4-stroke 1.9-horsepower Stihl 4-MIX engine with a working volume of 36.3 cm, which of course is filled with the consistency of gasoline and oil, as well as two-stroke engines. Such an engine emits less harmful substances into the atmosphere than two-stroke engines, while ensuring a low noise level. Air filter with long-life cardboard filter element does not require frequent maintenance.

The weight of the device is 5.9 kg, cutting is carried out with a fishing line, in other words, with a knife. The width of the swath with a knife is 23 cm, with a fishing line. 41 cm. The Stihl FS 130 petrol cutter has a straight bar and a “bicycle” handle, which can be simply turned at a right angle for storage and adjusted in height; for this purpose, unscrew the central screw. Includes double shoulder strap and goggles for eye protection.

high power,
reliability,
copes not only with the grass, at the same time with the bushes.

The following is called a disadvantage:

heavy weight, long-term mowing with the Stihl brushcutter is difficult,
if you need a little repair right away after purchase.

The stihl fs 250 brushcutter is a powerful semi-professional machine, suitable for mowing dry and hard grass, large thickets, also copes with shrubs and small trees.

power. 1.6 kW
engine volume. 40.3.2 cubic meters. cm,
2-stroke motor,
weight. 6.3 kg,
tank size. 0.64 l,
tool. a knife that mows grass by 255 mm, there is an option to install a head with 2.7 strings,
Elastostart system for easy starting,
primer for pumping fuel into the carburetor allows you to quickly start the petrol cutter even after a long idle time.

Calm FS-38 common disease

Includes a shoulder strap and goggles for eye protection, a detachable “bicycle handle” that can be rotated parallel to the bar for storage, the bar is even. Height adjustment of the handle is carried out without additional tools, just unscrew the screw. For our client, the controls are next to each other. on the handle.

As the main advantage of the Shtil FS 250 gas mower, users note the highest power and its ability to mow virtually anything. The disadvantages include an awkward suspension ear, high line consumption and strong vibration.

The Stihl FR 131 T knapsack gasoline scythe is a professional tool suitable for work in inaccessible areas and in places where the terrain is difficult. The shoulder strap makes it easier to carry the device, in particular for a long time, and greatly simplifies the work, because the instrument itself is quite heavy. 9.6 kg.

4-stroke 4-MIX engine,
power. 1.4 kW
motor volume. 36.3 cm3,
fuel tank. 0.71 l,
cutting element. metal knife with a diameter of 230 mm,
of course primer,
easy start system ErgoStart,
cardboard filter,
automatic decompression system,
anti-vibration system,
radial handle allows you to mow in inaccessible and tight spaces.
thanks to the collapsible bar in the disassembled view of the brushcutter, the Stihl FR 131 T simply fits into the storage bag.

The Shtil company also produces electronic and battery scythes, accessories and cutting tools for the current situation, personal protective equipment.

Motocars attract with their own mobility. they are independent of the outlet, they are taken independently even where there is no electricity, although this species also has its own difficulties and shortcomings. Among the “Shtil” petrol cutters, you can easily and simply find a suitable model for different tasks.

We carry out the winding of the fishing line

Slowly completed disassembly of the spool-spool without losing its spare parts allows you to proceed to the main task. winding fishing line into the reel. Technological features of the spool design and the number of working antennae determine the sequence of actions.

Coil with one working tendril

The most common option and easy sequence of actions:

The dimensions of the reel and the length of the unique factory winding determine the recommended length of the line for winding. 2. 5 m.
One end of the line is inserted into the fixing technological hole located inside the spool.
The fishing line is wound on the drum in the reverse rotation of the spool on the trimmer product direction. usually, on the inner side of the bobbin, an arrow indicates in which direction the winding is being carried out.
A small section of the fishing line is left free to bring it out. it is fixed in a special groove on the inner side of the bobbin, created to hold the winding when assembling the bobbin into working condition.
The left end of the line is passed through the hole on the outside of the bobbin.
The bobbin halves are assembled and put on the trimmer bar.

How to correctly replace the line in the mowing head, the reel of the STIHL FS 55 brushcutter

How to tuck the line into the trimmer reel calm

How do I load the line into the trimmer spool? Video instruction

The guaranteed output of the factory trimmer refueling will inevitably require a line change. Having a very rough idea of how to thread the line into the trimmer reel without the help of others, the newcomers are reluctant to take up this business. How to wind the line on the trimmer reel, how to thread the line into the trimmer reel. Autocut for stihl fs 55 trimmer line threading into the trimmer reel 2 part line winding on. But with some abilities, mastering this simple science does not present any difficulties, and the similar annotation presented below will greatly facilitate this process.

Coil with two working tendrils

In this type of spool, you should determine the number of grooves for winding the line, lying on the inside of the spool:

one groove. both antennae are wound together in one groove;
two grooves. each antenna is wound on an individual groove.

For both cases, a line with a length of 2-3 m is taken.In single-groove reels, the line is pulled into a through hole, its ends (antennae) are folded together and aligned, after which they are wound in the opposite direction of rotation of the bobbin on the rod side. inside the arrow usually indicates the correct direction of winding. If there are fixing grooves, the ends of the fishing line are threaded through them or held with the fingers of the free hand, they are threaded into the through hole of the outer half of the bobbin, the spool is closed and attached to the trimmer bar.

The difference in line winding in double-groove spools is that initially a 2-5 m long line segment is folded in half (to determine the middle fold), and the fold loop is inserted into a special groove between the grooves. Both antennae of the fishing line are wound each along its own groove, fixing the antennae and assembling the coil is similar to the above option with one groove.

The first execution of this procedure, perhaps, will seem long and rather laborious, but with time and experience this task will be solved much faster and easier.

The video below will clearly show how to thread the line into the trimmer spool and wind it correctly. this operation is not difficult and with some patience it will certainly be crowned with success:

We carry out the winding of the fishing line

Sluggishly completed disassembly of the spool-spool without losing its spare parts allows you to proceed to the main task. winding the fishing line into the spool. Technological features of the spool design and the number of working antennae determine the sequence of actions.

How to put the line in a calm mower. FS-38

took out the mower from the barn, but there was no line in it, I had to put the line and on the occasion took off a small

Coil with two working tendrils

In this type of spools, you should find the number of grooves for winding the line, lying on the inside of the reel:

one groove. both antennae are wound together along one groove;
two grooves. each antenna is wound on a personal groove.

How to refill a STIHL FS38 Auto Cut 11-2

The difference in line winding in double-groove spools is that initially a 2-5 m long line segment is folded in half (to determine the middle fold), and the fold loop is inserted into a special groove between the grooves. Both antennae of the fishing line are wound each along their own groove, fixing the antennae and assembling the coil is similar to the above option with one groove.

The first execution of this procedure, perhaps, will seem long and rather laborious, but over time and experience, this task will be solved much faster and easier.

Coil with two working tendrils

In this type of spool, you should determine the number of grooves for winding the line, lying on the inside of the spool:

one groove. both antennae are wound together in one groove;
two grooves. each antenna is wound on an individual groove.

The first execution of this procedure, perhaps, will seem long and rather laborious, but with time and experience this task will be solved much faster and easier.

Coil with two working tendrils

In this type of spools, you should find the number of grooves for winding the line, lying on the inside of the reel:

one groove. both antennae are wound together along one groove;
two grooves. each antenna is wound on a personal groove.

The difference in line winding in double-groove spools is that initially a 2-5 m long line segment is folded in half (to determine the middle fold), and the fold loop is inserted into a special groove between the grooves. Both antennae of the fishing line are wound each along their own groove, fixing the antennae and assembling the coil is similar to the above option with one groove.

The first execution of this procedure, perhaps, will seem long and rather laborious, but over time and experience, this task will be solved much faster and easier.

We carry out the winding of the fishing line

Automatic line winding on a spool

There is a type of reel in which the automatic mechanism winds without the help of others. from the user it is enough to just fill the line correctly. How do I load the line into the trimmer spool? Video instruction. How to remove the spool from the trimmer? How to wind the line in order to tuck the line. The fishing line is passed through a hole on the inside of the body, its antennae without winding are threaded through the hole on the outer body, the reel is assembled, and when the winding button is rotated, the fishing line is wound from the inside without the help of others. In such a spool, it is unrealistic to make the winding wrong: the mechanism itself will determine the correct direction, since it can only rotate in one direction.

The warranty production of the factory trimmer refueling will inevitably require line replacement. Having a very rough idea of how to thread the line into the trimmer reel on their own, beginners are reluctant to take up this business. However, with some skills, mastering this simple science does not present any difficulties, and the similar instruction presented below will facilitate this process as much as possible.

Coil with one working tendril

The simplest option and uncomplicated sequence of actions:

The dimensions of the reel and the length of the original factory winding determine the recommended length of the line for winding. 2. 5 m.
One end of the line is inserted into the fixing technological hole located inside the spool.
The fishing line is wound on the drum in the opposite direction of the spool rotation on the trimmer product. as a rule, on the inside of the reel, an arrow indicates in which direction the winding is carried out.
A small section of the line is left free to bring it out. it is fixed in a specialized groove on the inner side of the bobbin, designed to hold the winding when assembling the bobbin into working condition.
The left end of the line is passed through the hole in the outer part of the reel.
The bobbin halves are assembled and put on the trimmer bar.

How to put the line in a calm mower. FS-38

took out the mower from the barn, but there was no line in it, I had to put the line and on the occasion took off a small

Preliminary preparation

First, to wind the fishing line, you need to remove the spool (bobbin, spool) from the trimmer. certain actions will depend on the complexity of the configuration and the type of the product itself:

small electronic trimmers with a working position of the motor and coil at the bottom usually have side buttons on both sides of the bobbin. When pressed at the same time, the upper part of the reel, together with the inner content for winding the line, is detached, while the lower part remains on the trimmer. It is better to parse the bobbin on a flat, smooth place so that the spring included in the structure does not jump out and is not lost;
electronic and gasoline trimmers with a curved shaft without the ability to install a knife, usually have spools with a special wing: in similar designs, hold the spool in a fixed position with one hand, and turn the locking reel on the shaft with the other wing nut counterclockwise. How do I fit the line into the trimmer? How to thread the line into the trimmer spool. It is clear how to load the line on the trimmer. After disconnecting the nut, the entire bobbin is removed.
electronic and gasoline trimmers with the ability to install a knife on a straight bar (for example, Calm trimmers) have a hole under the reel. For the rod to remain stationary, a screwdriver or other suitable object is inserted into this hole, and with unhurried rotation, such mutual placement is achieved when the screwdriver goes inside the hole and the bobbin is fixed. After that, the coil body is scrolled clockwise (with a left-hand thread) and removed from the trimmer.

For the second and third options, the coils, depending on the design, are disassembled by different methods. In bobbins with a lamb, a lamb is turned inside out, in coils with latches, the latches are pressed and one part of the coil is released from the other. How to fill the line in how to properly cheap line. 2. On your site. If the halves of the bobbin are connected by thread, then it is enough to turn them by hand in the opposite directions until they are completely unscrewed.

Coil with one working tendril

The most common option and easy sequence of actions:

The dimensions of the reel and the length of the unique factory winding determine the recommended length of the line for winding. 2. 5 m.
One end of the line is inserted into the fixing technological hole located inside the spool.
The fishing line is wound on the drum in the reverse rotation of the spool on the trimmer product direction. usually, on the inner side of the bobbin, an arrow indicates in which direction the winding is being carried out.
A small section of the fishing line is left free to bring it out. it is fixed in a special groove on the inner side of the bobbin, created to hold the winding when assembling the bobbin into working condition.
The left end of the line is passed through the hole on the outside of the bobbin.
The bobbin halves are assembled and put on the trimmer bar.

Performance properties

The STIHL FS 38 portable trimmer belongs to the amateur class. It is intended for the care of small garden areas. Such brushcutters become indispensable helpers if it is necessary to tidy up the territory where it is impossible to use a wheeled lawn mower. For example, in hard-to-reach places, under trees and bushes, near flower beds and fences. The scythe is equipped with a simple and reliable 2-stroke engine of its own production. Carrying out work on a mixture of gasoline and engine oil. This engine provides simplicity of design, operation and service. As well as high working power and torque.

Design features

The STIHL FS 38 brushcutter is equipped with two handles. One of them is integrated into the body of the unit. it contains controls, an on / off button and a gas trigger. The other is a height-adjustable circular handle located on a curved shaft. This provides the operator with maneuverability when working. In the design of this model, the brushcutter does not have a gearbox, as a result of which it is more budgetary. FS 38 is equipped with a manual fuel pump. It supplies fuel to the carburetor and makes it easier to start a cold unit. The model in question already has a comfortable mowing head as standard. The line is threaded into it directly on the unit; you do not need to remove or disassemble anything. Due to this, threading the line has become more convenient and easier. To increase productivity, you can additionally purchase a mowing head with polymer knives, as well as a reinforced one with a line. This will allow you to work faster with tough grass.

STIHL FS 38 portable trimmer. budget option

STIHL is a German brand for the production of high quality equipment, electrical equipment and tools. The founder of the company is Andreas Stihl. It was formed in 1926 in Germany. The company gained fame and recognition of professionals for the release of a reliable and high-quality line of chainsaws on the world market. Today, products under this brand are sold in more than 160 countries around the world.

Specifications

Trimmer type STIHL FS 38. portable. The mowing width in 1 pass is 38 cm. The tool in question is equipped with a gasoline two-stroke engine with a power of 0.90 l / s. The working volume is 27 cubic meters. see The maximum engine speed reaches 9500 rpm. The fuel tank is designed for 0.33 liters. The material of the deck and body is made of wear-resistant plastic. The bar is curved and the handle is D-shaped. With its dimensions, the brushcutter weighs only 4.1 kg. The line has a thickness of 2mm.

Mowing width, cm	38
Engine	two-stroke, gasoline
Power, l / s	0.90
Engine speed, rpm	9500
Fuel tank volume, l	0.33
Working volume, cube / cm	27

Scope and application features

The trimmer is the best replacement for the manual braid, which has served people for centuries. But technology does not stand still. The main area of application of the considered trimmer model can be considered mowing grass and weeds in the local area. However, there are many other places where the brushcutter is considered an indispensable tool. In places where it is impossible to use a conventional wheeled lawnmower, a hand trimmer can easily handle. It is lightweight and very easy to use. For swathing hard-to-reach places, such as fences, trees and bushes. it is simply impossible to come up with a better tool.

Advantages and disadvantages

One of the most significant advantages of the STIHL FS 38 trimmer is that it can assume a service position, in which it is more convenient to change the cutting attachment and wash the cover. This model is the lightest brushcutter in the entire trimmer range. Due to this, the user can easily cope with large volumes of work with minimal effort. Also, an important advantage of this model can be considered its lightness and compactness. This allows you to transport it on almost any type of equipment. The manual fuel pump allows the unit to be started even after long periods of inactivity and in cold weather conditions. The height-adjustable D-shaped handle ensures pleasant and comfortable working even for a long time.

Price

Transmission benzotrimmer, 26mm, 7 tooth

Trimmer PATRIOT TR 230M

Gas Trimmer Reducer, 28mm, 9T, Assault!

Trimmer FORWARD FBC-452/2600 Main

Trimmer Husqvarna 129R

Trimmer PATRIOT PT 555

Trimmer Husqvarna 128R

STIHL trimmer spool (FS 38, 45. FSE 60, 71, 81).

Petrol front trimmer FBC-521/2600

Trimmer Makita EM4350RH

Trimmer Oleo-Mac Sparta 381 T

Starter for trimmer 328 GRAMADION

Petrol front trimmer FBC-261/1100

ELITECH T 33P trimmer

Trimmer Makita DBC340

ELITECH BT 52 Premium trimmer

ELITECH T 26P trimmer

Petrol front trimmer FBC-522/2600

Trimmer PATRIOT PT 3355

Petrol front trimmer FBC-521/3000 Main

Electric trimmer FORWARD FGT-230/1200

PATRIOT PT 4355 Imperial trimmer

Petrol front trimmer FBC-522/3000 Main

Trimmer STAVR TB-1700LR

Trimmer Parma ET-1200

Trimmer STAVR TB-1400L

Garden trimmer Smallcut plus 350/23 (09806-20.000,00)

Everything you need for this article is HERE

From an old wind instrument, I cut a piece of copper tube 25 mm long with an inner diameter of 27 mm. With the help of emery and a file, I removed the ends.

Then, with a light hammer blow, he pressed the tube against the plastic housing of the pressure hose.

From a birch stick, he cut a pipe 10 mm long with an outer diameter of 27 mm. and also pressed it against the brass tube from above, up to the sleeve.

To secure the structure, he tilted the tube around the plastic with a sharp rod and used a hammer to press the edge along the wooden cork.

The first way

Line bent in half

The prepared segment (in this case, it is 4 meters) is bent approximately in half. one segment should be 15-20 cm longer, and inserted into a special slot located on the dividing partition.

The line is inserted into the slot

The line is wound in the direction determined earlier. This is done in an interference fit, the line is neatly distributed. In this case, you need to wind a segment that is longer in the section that is closer to the button.

There are designs that do not provide for dividing the coil into two sections. This does not change anything, the line is wound in a similar way. You just need to make sure that the segments do not overlap with each other.

The first should end that section, which is located at the bottom of the coil, i.e. the one closest to the fixing holes.

This tip fits into the corresponding hole in diameter. The line is securely fixed.

The line is securely fixed

A long segment is wound half a turn. There he is similarly fixed. In this case, the segment crosses another section of the coil.

A long segment is wound another half turn

The fixed ends of the coiled line are inserted into the holes of the trimmer spool body.

The fixed ends of the coiled line are inserted into the holes of the trimmer spool body

The coil is attached to the body. The ends of the fishing line are pulled with effort so that the fishing lines previously fixed in the holes of the reel jump out from there. It is easily identified by the characteristic sound (click).

The ends of the line pull up with effort

Button spool snaps into trimmer spool housing.

Stihl FS38 How To Refill Trimmer Line Spool // Trick To Make It Easier

Button spool snaps into trimmer spool housing

The line was changed successfully. In this case, you need to put it back on the trimmer and you can start mowing the grass.

It should be repeated, there is no need to remove the spool from the trimmer. this was done for clarity of the process of replacing the fishing line. You can disassemble the spool in place, wind it on the spool and put it back.

Line replacement completed successfully

Tips so that they do not hit the trimmer cover can and should be trimmed.

OVERVIEW OF EXCEPTIONAL TOOLS FOR MASTERS AND REPAIRS AND ALL FOR GARDENS, HOME AND CAT.

The dust cap wiped off the clamp nut body and the saw fell out. The pilot holes are clogged with grass and soil. Soaking and returning the bobbin manually does not help.

I really wanted to save money.

Method 2. two segments

Two coiled line lengths

fundamentally no different from the method The only difference is two wound pieces of fishing line, instead of one.

The end of each segment is folded

The end of each segment is folded.

Two special fixing sockets

There are two special fixing sockets on the coil (see picture above).

We begin to reel the fishing line

They cling to it with a hook formed earlier on the fishing line, and begin to wind the fishing line.

Winding is carried out in a special order

The winding must be carried out in the following order: first the lower line, i.e. the one that is closer to the fixing holes at the bottom of the coil, and only then the top one, i.e. the one that will overlap the bottom section.

The bottom line is reeling

The tips are cut into the holes in the trimmer spool body. They are pulled up until they click, which means that the line has come out of the latches.

The tips are threaded into the holes in the trimmer spool body

The coil is fastened into the body. The line in the spool has been replaced.

The line in the spool has been replaced

Sources:

http://chistayrabota.ru/kak-zapravit-lesku-v-katushku-trimmera-shtil/
http://trubymaster.ru/kak-zapravit-lesku-v-katushku-trimmera-shtil/
http://instrument.wiki/perenosnoj-trimmer-stihl-fs-38-bjudzhetnyj-variant/
http://san-lider.ru/leska/smena-leski-v-trimmere-stihl.html

Grass Trimmer calm, fill, line, trimmer