Trimmer Electric Champion Et1004a

A type of lawn engine, such as a trimmer, It is divided into several main categories: gasoline, battery, mechanical and electric. Each of them has a unique structure.

In gasoline ICE the fuel mixes with air until it enters the cylinder and then ignites from the spark of the spark plug. The power is regulated by the amount of mixture supplied, using the knob or gas pedal. A gasoline engine has a high speed and specific power with relatively low noise. Differs in simplicity of design. The main disadvantage. Fuel consumption.

Electrical engine It is issued not only by environmentally friendly work, but also by significantly lower noise level. For the electric motor to work, it is necessary to connect it to a power source, for example, a voltage of 220-380 volts to the mains.

The advantage of the battery type engine is that you do not need a permanent connection to the mains. The tool allows you to carry out intensive work until the battery runs out.

Electric starter designed to bring trimmer in working condition. This start-up system is the most modern and convenient; it allows you to start work by pressing the electric starter button or by turning the ignition key without resorting to physical force. The main components of this system. This is an electric motor (starter) and a battery. An electric motor, having received an electric impulse from the storage battery, is launched and, having created a torque, by means of various mechanisms, betrays it to the main components of the internal combustion engine, bringing it into working condition.

The number of revolutions of trim motors. This is the minimum or maximum possible number of shaft revolutions that can be allowed for normal engine operation. It is measured in revolutions per minute (rpm). Exceeding this parameter or a long operating time at maximum or minimum speed, leads to rapid wear of engine components. At high speeds, power and fuel consumption increase.

Trimmers are gasoline, electric or even rechargeable. They are equipped with engines that have different location. Most petrol trimmer models have top engine. Top engine trimmers are more practical, properly balanced and have high power, which is great for intensive lawn processing. Such engines have good cooling and are equipped to the maximum from mechanical damage and moisture.

With engine bottom, As a rule, electric trimmer models are available. They are characterized by low power and small overall dimensions. They are also poorly cooled and have some limitations on the duration of work. They have no protection against moisture and mechanical damage.

Voltage lawn machinery such as trimmer, measured in volts (V) and shows the required power level of the electrical network, as well as the level of insulation of electrical equipment. Transmission, distribution and transformation is carried out in accordance with the requirements of consumers and the capabilities of sources. The voltage values ​​for the network are established by GOST.

Trimmer Electric Champion Et1004a

Modern trimmers designed to care the lawn, depending on the model can be equipped with various cutting elements, which can be used for mowing a variety of vegetation.The most common attachment is considered fishing line or, as it is also called cord. The main purpose: mowing grass, in not very neglected areas (it is convenient to bypass fences, trees, buildings). It is wound on a special head, with the release of a pair of ends that serve as a cutting tool. They can be from 0.8 to 5 mm thick. Thick fishing lines are used on powerful gas trimmers and can cut large weeds, thick stems of dried grass and soft young growth of small shrubs. Fishing line up to 2 millimeters is mainly used on electric trimmers, as they have a less powerful engine and design.According to the method of release, fishing lines are divided into: manual, semi-automatic (cord is pulled out of the head when the operator presses it to the ground) and automatic (fishing line is pulled out to the desired length when gaining speed). In the latter case, there is a large consumption of fishing line, so the most popular are semi-automatic models.In the case when it is necessary to cut thicker grass or shrubs, a knife or disk is used. The knife can be made of plastic or metal and have a different number of blades. For the most difficult work (shrubs, small young trees), metal discs with a large number of teeth are used. Some models of trimmers can be equipped with a nozzle with a saw (height cutter), which is designed to cut tree branches.The ability to use knives and a blade depends on the engine power and trimmer design, you must strictly follow the instructions. On models with a curved bar, fishing lines and small plastic knives can be used.Metal knives and discs are used on straight-bar trimmers. Since this design is safer for the operator (the greater the distance from the cutting head, special handle, stop). When a knife or disk collides with a hard surface, it is often thrown back. In addition, a heavier tool creates a greater load on the nodes and components of the trimmer.

Trimmer handle Designed for convenient trimmer control. It can be equipped with additional buttons that are responsible for the operation of the tool. The handle can be of various shapes: D-shaped, J-shaped, U-shaped, Y-shaped.

For instance, D-shaped handle great for handling small areas, but at the same time it requires high maneuverability from the operator. J-handle prevents approach to a bevel gear. This handle is ideal for working with a grass knife. The combination of these elements will make your work more productive and convenient.

Y and U shaped handles. The most popular trimmer handles, which are great for mowing in open space, while the mowing movements will be similar to the mowing movement of an ordinary scythe.

Thickness used fishing line on the trimmer, mainly depends on the type and power of the engine. So, fishing lines with a thickness of 1.2. 2 mm are used on trimmers, and on trimmers equipped with more powerful and unpretentious gasoline engines, powerful and strong fishing lines with a thickness of 2.4-3.5 mm are installed, which can cope with thick stems, weeds and dead wood. If you use a fishing line with a thickness greater or lesser than specified in the technical specifications of the trimmer, then rapid wear of the components and components of the power plant is possible.

Trimmer heads are divided by type fishing line on the auto, semi-automatic and manual. Semi-automatic type, is the most convenient and popular today, as the other types have their own nuances. For example, automatic feeding quickly consumes fishing line, unlike manual and semi-automatic. This type is perfect for users who value quality and speed in their work, but at the same time forget about saving. Manual feed of the fishing line significantly slows down the process of mowing grass. To replace the fishing line, you need to stop working, turn off the trimmer, then manually extend the ends of the cord.

Weight. This is the mass of the machine in the assembled state (measured in kilograms). Despite the apparent insignificance of this parameter, it is worth paying attention to this important property of garden equipment. Weight affects mobility and quality lawn machinery. Too much weight can cause difficulties when unloading and loading into a car. A more heavy-duty vehicle may be required. Larger weight requires a more powerful engine with high fuel consumption. However, with a small mass, problems may arise, for example, with the quality of mowing the lawn.

Trimmer shoulder strap It is designed for comfortable wearing, and it will allow you to easily and quickly perform work, protect against accidents and reduce fatigue during prolonged use. It provides an even distribution of the weight of the device over the human body, which allows you to hold the trimmer for a long time in comfortable conditions. All straps and clamps are securely locked in a comfortable working position.

The CHAMPION ET1004A trimmer is used on garden sites to care for lawn and small shrubs. The tool is equipped with a powerful electric motor, providing high performance. As a cutting element, a fishing line and a knife are used, which allows you to cut off thick, hard grass and small bushes. The trimmer is convenient to use thanks to the P-shaped handle, it makes the tool control reliable and prevents slipping. The collapsible bar of the trimmer makes its storage and movement simple and convenient.

›The design of the handle of the trimmer R-shaped that does management reliable and convenient
›The presence of a special casing prevents the escape of dirt, grass and stones to the operator
›The trimmer motor is protected by a robust housing, this ensures its frequency and makes it possible to mow wet grass.


Simple and reliable
The ability to select a cutting element.