Variable Speed Aeg Angle Grinder
AEG WS 13-125 XE
- Angle Grinder
- power 1300 W
- disk rotation speed up to 11000 rpm
- disc diameter up to 125 mm
- weight: 2.4 kg
The best deals for the AEG WS 13-125 XE
Reviews of AEG WS 13-125 XE
Advantages:
1. Regulator of revolutions
2. Soft start
3. Speed stabilizer
4. Quick release nut
5. Quick adjustment casing
6. You can put brushes from makita with “shooting”
7. Vibration damping handle
Disadvantages:
1. Noisy, but not annoying, since there is noise during operation anyway
2. Heavy and not as comfortable to hold with one hand as other 125s, but this is a fee for power
Comment:
Just a great model. Considering all the goodies for this price. it’s a nugget. Analogues with the same bells and whistles are twice as expensive.
I have been using it for more than half a year. I stroked with aezhka several meters for wiring, respectively, after work, the tool was covered in cement dust inside the case. After complete disassembly (except for the gearbox housing) and cleaning, the flight is normal!
Disadvantages:
1. Under the paint, dust and sand are visible on metal parts.
2. Openings for air intake to the drive of the angle grinder.
Advantages:
Only positive benefits
Disadvantages:
Not caught. excluding weight. But there is nowhere to go. Power in 1300
Advantages:
enough power for any kind of work.
Comment:
power is enough for any kind of work cutting, grinding. speed control is a very necessary thing. high quality, it is pleasant to work with such a tool.
Advantages:
Everything an angle grinder should do, all functions are at their best. The price is very pleasing. Cord 4 meters. Decent quality, German.
Disadvantages:
I can only find fault with the weak-to-touch fastening of the electric wire to the body. We’ll see, but it’s not critical.
Comment:
Smooth start, support and speed control. super, especially after bad cars. On the old angle grinder, the sander vibrated horribly. On this one, the same disk works almost smoothly, does not shake. Very satisfied.
Advantages:
Excellent value for money / functionality!
She worked in serious intensity for over a year. I would have worked for 2-3 years if not for the negligent attitude towards the typewriter and the “left” brushes.
Disadvantages:
It does not cut itself, you have to take it in your hands)
Comment:
She worked for more than a year in production on Monday. Saturday in different hands in the shop (in the hands of the owner it will work 2-3 times longer).
Everything except the anchor. The anchor died because of the left brushes. The rest of the machine is in excellent condition.
Comfortable in the middle hand and lies more.
Enough power for its size.
I definitely recommend taking into account the price of competitors.
Advantages:
Speed control
speed control (maintains the set number of turns regardless of the load)
very fast disc change and instant casing adjustment without the use of tools
fits well in hand
Disadvantages:
– did not find
Comment:
Great choice!
I was always afraid to work with angle grinders, especially after the case when the disc scattered and flew into the face. Then it was lucky, and Bosch was without injuries, but since then I have avoided the angle grinder.
But there was a need to cut the car body. After comparing all the models, I came to the conclusion that this model with its characteristics, given its cost, will probably be the best! I was right! I put 2800 rpm due to the rpm support function. cuts like clockwork! In this mode, it works quietly, there are no vibrations! It’s not scary at all if you skew the disc. it will just stop. At this speed, he will not inflict injuries (of course, glasses or a shield are needed). I don’t understand why angle grinders need 11,000 rpm?
Advantages:
Power,
smooth start,
anti vibration handle,
speed regulator,
keyless nut,
keyless protective cover
long (4m) rubberized power cord.
Disadvantages:
If you dig:
power button, you can accidentally turn off the tool if you work without a handle and hold the body with both hands (but such buttons are on most small angle grinders).
The diameter and weight are large, it is difficult to work with one hand, but this is a consequence of the powerful engine. But for safety reasons, the angle grinder can only be operated with two hands.
Comment:
I bought for polishing a log house. We needed a machine with a speed regulator, because the wood needs to be sanded at low speeds.
The price was acceptable, I took it for 5000 plus. I polished about 250 m2 of logs. everything is alive, the brushes are almost not worn out. There are no backlashes in the bearings yet. They do not buzz. Rubberized cable. THING, most of the work fell on freezing temperatures, the cable becomes denser, but bends, does not break in the cold,
I tried to cut a little, when cutting, a keyless nut and a keyless protective cover are very convenient.
I also liked the anti-vibration handle, I now wear it on the second angle grinder of a larger diameter.
Works itself out by 110%. I recommend!
Advantages:
Price, quality, versatility, 3-year warranty, not heated.
Comment:
Worked with many angle grinders. Both with and without speed control.
From an angle grinder 125mm with functions: starting current limitation, overload protection, speed control, speed stabilization system. Is the cheapest! Blue Bosch and Metabo are 20% more expensive. Makita has no such models at all.
It was AEG 13-125XE that I bought as a multifunctional tool. Because there was a nozzle with a dust extraction and a slider nozzle for a straight cut at an angle of 90 degrees. Thus, the angle grinder turned into both a sander and a circular dust-free.
About sanding wood. if the area of the treated surface is not large, then no problem, but if the area is large (log house, bathhouse), it is better to use USBM, for example Makita SA7000C or AEG SE 12-180, they have a diameter of support plates up to 180mm (more capacity), you can use 125 and 150 diameters.
The fact is that the angle grinder and polishers have different gearboxes (namely, gears). polishers at low speeds have a large torque (you can press, press shamelessly).Angle grinder is designed for cutting metal, so it has a crazy speed (if the pressure will slip, you can burn it during prolonged work, the wood will burn, and finally the slots will merge on gears)
Although. if under the project. for slaughter. an angle grinder is also possible))
In general, something like that. I recommend AEG 13-125XE to everyone! price quality!
Advantages:
Sufficient for small jobs. Lightweight yet powerful. Quick change of circles and of course a long cord. Recommended for use.
Advantages:
Works softly. RPM plus minus, suitable for fine work.
Disadvantages:
Heavy at first. And then I got used to it.
Comment:
Good working tool.
Advantages:
Powerful for both cutting and grinding, speed control, keyless nut, long cord.
Disadvantages:
The case is a bit “thick”, but the power compensates for everything. Although this is subjective, whoever has large palms does not care.
Comment:
An excellent machine for universal use. Price-quality unrivaled. If you need a 125 lap dry car for various jobs. you can safely take
Advantages:
Quick-clamping nut, quick-detachable protective cover, soft start, adjustment and maintenance of speed.
Comment:
Took to work with one hand on porcelain stoneware and tiles, since the existing two-hand 150 disc was not suitable for this. Thanks to the quick release attachment and guard adjustment, the transition from cutting disc to grinding cup is a matter of seconds! Very satisfied.
Advantages:
Smooth start, ergonomic handle, quick disc fixation, adjustable guard, speed control, long cord, low price.
Disadvantages:
It heats up at low speeds, the retaining nut bracket broke off, it was worth turning it with a slight jamming with pliers. There is no speed stabilizer, it stops immediately under load. The power key began to stick, the machine continues to work in the off position. There was a knock in the gearbox when the power was turned off.
Comment:
It’s worth its money, all the listed disadvantages apply to any angle grinder with similar characteristics, because everything is now of very mediocre quality. Considering that they ask for a little for this machine. it’s the best of the worst. The machine works in difficult conditions, participating in the polishing and finishing of the log house. I tried to grind on it with nylon brushes at low speeds (the log burns higher). The motor heats up almost immediately, the stabilizer does not hold speed at all, if you press it slightly, it stops immediately. Therefore, I use it on the sidelines, as an auxiliary one with other equipment and try not to turn it below average speed. For sanding, it is better to use a polisher with a different gear ratio. By design. a vacuum cleaner, pulls all the dust into itself from below and throws it out through the holes in the gearbox cover. The bottom holes, in my opinion, are small and unfortunate. I cool it for about 5 minutes after working at the highest speed, while dust accumulated in the internal cavities is flying out. I haven’t disassembled it yet, but I started tapping the gearbox after turning it off. I am personally strained by the start key, it is not always fixed the first time, and just as easily you can hook it on and off when working. The best solution. drown her into the body. In addition, recently it has started to stick when disconnected, continuing to twist the angle grinder. There were never any problems with the wire, although it fell and hung on my cord more than once. Let’s see how long it will last, but if it breaks down, I will most likely take the same.
Advantages:
convenient. I took it because I used the identical one for more than three years and was very pleased
Comment:
cut granite, porcelain tiles, tiles, wood, polished, polished.
Advantages:
Power,
smooth start,
anti vibration handle,
speed regulator,
keyless nut,
long rubberized power cord.
Disadvantages:
If you dig:
power button, you can accidentally turn off the tool if you work without a handle and hold the body with both hands (but such buttons are on most small angle grinders).
The diameter and weight are large, it is difficult to work with one hand, but this is a consequence of the powerful engine.
Advantages:
Fits comfortably in the hand
Flat reducer
Moderately sensitive overload protection
Smooth start
Good weight distribution
Disadvantages:
The anti-vibration handle is unstuck until the end is only halfway, but still not pleasant.
Flimsy dust boot of the wire, it is clear why the wire breaks at the base.
Quick release nut (washer)
Comment:
In general, very good emotions from the use of this angle grinder, when I chose to subtract that someone doesn’t like the backlash of the spindle, I didn’t see any backlash in mine, I compared it with the dummy 5030, the same way. What pleased AEG withstand intense loads with heavy equipment, worked for 4-5 hours without turning off with hairy cups with steel wire, ripped off the paint, the cup weighs about 300 grams, diameter 110mm, worked fine, but the gearbox heats up, but not critical, maximum degrees 45. I pressed the cup in particularly inconvenient places until the electronics cut off, I really liked the sensitivity to overloads, as necessary, no more, no less. Then I grinded her paving slabs with turtles on granite on dry, I erased the 4th discs on dry (or re-grinded from 200 tiles, again for 3-5 hours without turning off), there was a lot of dust, grinded in the garage and when between times it was necessary to saw off the metal I changed the rig and gave it maximum speed, accumulated dust flew out of the ventilation holes in a column, but it worked and continues to work. I have a normal attitude to the instrument, I just have the opinion that the instrument should work for you. For the money, a great choice. By the way, many people write that a self-locking nut is a topic, I did not really understand it, it happens that a disc for metal will clamp and unscrew it for this bracket, well, it’s not possible because the lever has a shoulder equal to the diameter of the washer and poor two fingers trying to crank this “super invention” as a result of which you have to hold the disk lock button with one hand, and the other for the disk itself by inertia. the backlash in the helical gear in a couple of mm is to unscrew this washer, in general, maybe I did not understand what and do what is wrong, but the washer with a bracket enrages, I also unscrew the usual one, but there is at least a possibility to insert a key, and then if the circle only cobras from knipix help grind off
Comment:
Excellent angle grinder for frequent use.
Advantages:
Clamping nut by hand, speed control, soft start, shutdown when clamping the disc, the guard moves quickly at the touch of a button
Advantages:
smooth start, speed control, constant electronics. protected from biting the disc, the protective casing rotates almost 360 degrees (I’m left-handed it’s convenient) powerful not to warm up competitors are more expensive.
Disadvantages:
on button not credible absence from unintentional switching on no case
Comment:
this is the first angle grinder, but I managed to grind it and cut it and clean it up and cut the tree, I’m happy
Advantages:
Quickly clamping nut (no wrench needed to loosen when biting and spilling the disc)!
Maintaining power at rpm!
Smooth start!
Disadvantages:
I would also like to have plastic protection for the standard one (like on hilti)
Comment:
I bought already 2 (as a gift to my father-in-law)!
1 have been using for more than a year, no complaints about work or quality! Super machine for the money. I advise everyone!
Advantages:
angle grinder is an exact copy of WS 12-125 XE which has been one of the best-selling models for a long time and that says it all. Convenient to hold in hand, self-tightening nut, speed adjustment, shutdown in case of overload in one word, you can not imagine better. advise.
Advantages:
Everything an angle grinder should do, all functions are at their best. The price is very pleasing. Cord 4 meters. Decent quality, German.
Disadvantages:
After a year of work in the “housing estate”. The on-off button burned out. My colleagues and I made an additional button on the body plus blue electrical tape. I can only find fault with the weak-to-touch fastening of the electric wire to the body. We’ll see, but it’s not critical.
Comment:
Smooth start, support and speed control. super, especially after bad cars. On the old angle grinder, the sander vibrated horribly. On this one, the same disk works almost smoothly, does not shake. Very satisfied.
Advantages:
Convenient and powerful angle grinder
Comment:
The angle grinder is very satisfied, works smoothly without vibration, lies in the hand.
Advantages:
Cuts well. Keeps turns. Excellent angle grinder
Disadvantages:
Expensive, bought on the advice of a friend.
Advantages:
Smooth and quiet operation, powerful, fits perfectly in the hand
Disadvantages:
The cable hardens a little in the cold. On Bosch, the rubber cable insulation is much softer
Comment:
the switch is standard, like all famous manufacturers
Advantages:
An excellent model, ample power with adequate weight.
Disadvantages:
The power button is quite unreliable. often accidentally touches. the handle attachment diameter is small does not inspire confidence
Comment:
I did a lot of things. mostly wood skins. for a month of daily use for a couple of hours a day, no complaints. Before that, Metabo we 9-125 has something to compare with. AEG is much better. a couple more points to fix and generally excellent
Advantages:
A vibrating pen, a long wire, the case is neatly made, sophisticated electronics for your money, a quick-detachable protective cover, a nut without a key, bearings and armor of the rotor and stator
Comment:
You can find the price for a kathora, the competitors will not have this
Advantages:
Convenient. soft operation of the engine, handle, powerful, speed regulator, metal gear housing, not plastic., durable plastic housing, comfortable start key. smooth start. Interesting design of the protective cover, clamping nut. Optimal price-quality ratio.
Comment:
This is the second AEG instrument in my workshop. with three angle grinders. Used mainly for grinding parts. An extremely convenient and undoubtedly high quality tool, for this price, most likely there is no better. If the choice is in the 125mm segment, then this machine is a must for consideration. Over the past 20 years I have owned five “angle grinders”
Disadvantages:
For my work, the power is 1300 watts. this is the face value, and often you need the maximum. but this is no longer a problem angle grinder
Comment:
Angle grinder AEG WS 13-125 XE worked for me on not the most difficult type of work. cutting metal pipes with a diameter of 50mm and a wall thickness of 2mm. (a disc for metal with a thickness of 1.5 mm). coped with the task perfectly. When cutting tiles with a disc on concrete, the speed controller came in handy. everything works well. When it was required to work with a scraping disc for metal (and it is known to be heavy.) I used a more powerful DeVolt angle grinder (1500W). she has been helping me out for about 5 years and has never let me down, but power has a downside. not even a mass, when you work all day holding an angle grinder in one hand, the torque of such a powerful angle grinder strains your hand to numbness and when you sometimes change the angle grinder, you rest without stopping work. Yes, and professionals note. Guys, productivity is greatly increased when you have a special tool for each type of work. Change discs on one angle grinder, either for cutting or for cleaning. well, you understand me. Yes, AEG comes with a keyless nut. I have never used a key on ordinary nuts either, but it is somehow nice here, now let’s see how long it will live and whether it can handle it when the disk is “bitten”. but she has the ability to use the standard key. Good luck to everyone at work and remember about safety!
Small one-hand angle grinder 125mm Titan BSUM7125
Large 230mm metal angle grinder Titan BSUM20230
Professional.
Why the lower limit is not lowered to a minimum?
The variable speed angle grinder gives you more options for grinding and polishing, but not cutting. Deep scratches are not removed at high speeds. The fur coat or foam pad attached to the rubber support-sole will be torn off, the rubber platform will start to smoke, the polish will fly off the rig. Traces of burning will remain on the wooden blank, and the plastic will soften and melt.
Impact with felt, foam rubber, wool, sisal or polymer-abrasive wheels is performed at low, but different speeds and the wider the speed range of the angle grinder, the more possibilities for processing.
However, the cooling system of the angle grinder electric motor depends on its rotation and at low speeds, the motor, especially under high load, quickly overheats.
For professional models of most manufacturers: AEG WS12-125 XE, Makita 9562CRV, Flex LE 14-11 125, the lower limit is 2800 rpm. On a household tool, you can find 1000 rpm, like the Titan PSUM11125E. The operation of such an angle grinder requires more attention from the user and periodic activation at maximum idle speed to increase the flow of cooling air.
Powerful 230mm Titan Large Angle Grinder BUSM26230
angle grinder 230 mm Sturm AG9524P
Large angle grinder.
Inconvenient for making precise cuts, for example, cutting pores in welded seams of thin-walled pipelines. The 6.7 kg weight, like that of the GA9040RF01, is more difficult to control for the accuracy of the immersion depth. Cutting discs of large angle grinders start from 2 mm thick, as opposed to 0.8 mm for small 125 models.
Even a physically strong worker can hardly cope with the force of a jerk, when the rig is jammed. But cutting depths up to 85 mm, in one plunge without turning the workpiece, can only be performed by large angle grinders, such as DWT WS22-230 D or Titan BSUM20230. Cutting through is more hindered by the dimensions of the case. You can go a little deeper by tilting the angle grinder, but the cut will no longer be perpendicular to the surface.
From the first AEG angle grinder to modern models
There is no doubt about the high quality and reliability of the AEG angle grinder for one simple reason: it was this company that became the first manufacturer of this tool in the 40s of the last century! The Bulgarians later bought a license from the Germans, giving birth to the famous “socialist” version of the instrument that got its name. Of course, since then, the company’s products have undergone many changes. And this concerns not only the improvement of a number of characteristics, but also purely external changes: in 2009, AEG underwent a rebranding, drawing attention to their products with a bright orange design. Also, the company is constantly working on expanding the range of manufactured tools.
How AEG products evolved
Today the German company AEG is one of the world leaders in the field of mechanical engineering and power engineering. The company is also engaged in the manufacture of various products for home use. Meanwhile, the company’s history is much more turbulent than one might think now. Before and during the First World War, AEG was one of the main manufacturers of weapons. This company appeared back in 1883, starting its activity with the manufacture of electric lamps according to a patent obtained from Thomas Edison.
angle grinder (angle grinders) AEG
Simple and efficient sanding with quality tools
An angle grinder, better known in everyday life as an angle grinder, is a universal tool. and therefore extremely common. It owes its colloquial name to the times when this coveted tool was in short supply. in Soviet times, an angle grinder, capable of greatly facilitating men’s work, was made into an angle grinder. Fortunately, today such an assistant is available to everyone, it is used for grinding and cutting a variety of materials and is relevant in a wide range of works. from body repair to construction. Accordingly, a number of modern companies are engaged in the release of the tool. In particular, the angle grinder is becoming a popular choice, angle grinder AEG.
angle grinder (angle grinders) AEG
Features of AEG grinders
Angle Grinder The AEG angle grinder excels at cutting, sanding and sanding a wide variety of materials, making it a versatile tool for a variety of tasks. Thanks to the special handle, they are easy to handle and guarantee less vibration compared to their counterparts. This tool will serve efficiently and for a long time thanks to the presence of a flat metal gear. The same characteristic provides an excellent view of the work surface, which makes working with the AEG angle grinder comfortable.
New on the market
Since the early days of the tools release, AEG has focused on expanding the range and introducing new technologies. So, it was this company that at one time made the first portable instruments. This trend is still relevant today. Thus, one of the newest AEG angle grinders is the AEG WS 24-230 V model, designed for professional use, which has collected all the achievements of the company over the past years. This angle grinder is designed for continuous grinding and cutting of large volumes of material without interruptions to cool the tool.
angle grinder (angle grinder) AEG
- FIXTEC keyless nut. work safety and quick change of equipment
Power: 1300 W
Disc diameter: 125mm
Speed: 2800-11500 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Long network cable (2.5 m). for freedom of movement
Power: 800W
Disc diameter: 125mm
Speed: 12000 rpm
Maintaining constant speed under load: no
Soft start: no
- Protection of the engine from abrasive dust. for safe working with stone
Power: 2200 W
Disc diameter: 230 mm
Speed: 6600 rpm
Maintaining constant speed under load: no
Soft start: no
- Double insulated and dustproof for harsh environments
Power: 1000W
Disc diameter: 125mm
Speed: 11500 rpm
Maintaining constant speed under load: no
Soft start: no
- Compact slewing gear for confined spaces
Power: 800W
Disc diameter: 125mm
Speed: 12000 rpm
Maintaining constant speed under load: no
Soft start: no
- Anti-vibration handle and keyless safety guard
Power: 1200 W
Disc diameter: 125mm
Speed: 11500 rpm
Maintaining constant speed under load: no
Soft start: no
- Save time on tool changes. no wrench required
Power: 1300 W
Disc diameter: 125mm
Speed: 2800-11500 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Maximum safety: double insulation and protection against accidental starting
Power: 1300 W
Disc diameter: 125mm
Speed: 2800-11500 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Dust protection for engine. safe handling of concrete and stone
Power: 2200 W
Disc diameter: 180mm
Speed: 8500 rpm
Maintaining constant speed under load: no
Soft start: no
- Smooth starting and overheating protection extend engine life
Power: 1520 W
Disc diameter: 125mm
Speed: 2600-11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Safety: protection against accidental starting prevents injury
Power: 2400 W
Disc diameter: 230 mm
Speed: 6000 rpm
Soft start: yes
- Smooth starting for jerk-free start-ups and reduced wear on the motor brushes
Power: 2200 W
Disc diameter: 230 mm
Speed: 6600 rpm
Maintaining constant speed under load: no
Soft start: yes
- Soft start for jerk-free operation
Power: 2400 W
Disc diameter: 230 mm
Speed: 6600 rpm
Soft start: yes
- Special system dampens vibration up to 50%. less hand fatigue
Power: 1000W
Disc diameter: 125mm
Speed: 11500 rpm
Maintaining constant speed under load: no
Soft start: no
- Powerful grinder with the ability to work on stone and concrete
Power: 2200 W
Disc diameter: 230 mm
Speed: 6600 rpm
Maintaining constant speed under load: no
Soft start: no
- Smooth start. start of work without jerks and increase the service life of the brush unit
Power: 1520 W
Disc diameter: 125mm
Speed: 2600-11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
Power: 1200W
Disc diameter: 125mm
Speed: 11500 rpm
Maintaining constant speed under load: no
Soft start: no
- Convenience and safety: slewing gear and protection against accidental starting
Power: 800W
Disc diameter: 115mm
Speed: 12000 rpm
Maintaining constant speed under load: no
Soft start: no
- Overheating protection for long and productive work
Power: 1520 W
Disc diameter: 125mm
Speed: 11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Safety: LLO function prevents accidental activation
Power: 700W
Disc diameter: 115mm
Speed: 12000 rpm
Maintaining constant speed under load: no
Soft start: yes
- Gear housing can be rotated in 90 degree increments to operate at any angle
Power: 800W
Disc diameter: 125mm
Speed: 12000 rpm
Maintaining constant speed under load: no
Soft start: no
- Special system dampens vibration up to 50%. less hand fatigue
Power: 1000W
Disc diameter: 115mm
Speed: 11500 rpm
Maintaining constant speed under load: no
Soft start: no
Power: 1200 W
Disc diameter: 125mm
Speed: 11500 rpm
Maintaining constant speed under load: no
Soft start: no
- Special system dampens vibration up to 50%. less hand fatigue
Power: 1000W
Disc diameter: 125mm
Speed: 11500 rpm
Maintaining constant speed under load: no
Soft start: no
- Supplied without battery and charger. you do not overpay.
Disc diameter: 125mm
Battery type: Li-Ion
Spindle speed: 11000 rpm
- Supplied without battery and charger. you do not overpay.
Disc diameter: 125mm
Battery type: Li-Ion
Spindle speed: 11000 rpm
Disc diameter: 125mm
Battery type: Li-Ion
Battery capacity: 6 Ah
Spindle speed: 11000 rpm
Disc diameter: 125mm
Battery type: Li-Ion
Battery capacity: 5 Ah
Spindle speed: 11000 rpm
- Includes two HD batteries, 6 Ah each!
Disc diameter: 230 mm
Battery type: Li-Ion
Spindle speed: 5500 rpm
Disc diameter: 115mm
Battery type: Li-Ion
Battery capacity: 5 Ah
Spindle speed: 11000 rpm
- Rotary handle and 3-position auxiliary handle for easy operation
Disc diameter: 230 mm
Battery type: Li-Ion
Spindle speed: 5500 rpm
Power: 1200 W
Disc diameter: 125mm
Speed: 2800-11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Gear housing can be rotated in 90 degree increments to operate at any angle
Power: 800W
Disc diameter: 125mm
Speed: 12000 rpm
Maintaining constant speed under load: no
Soft start: no
- Long lasting: improved dust protection and milled metal gears
Power: 1200 W
Disc diameter: 115mm
Speed: 11500 rpm
Maintaining constant speed under load: no
Soft start: no
Power: 2200 W
Disc diameter: 230 mm
Speed: 6600 rpm
Maintaining constant speed under load: no
Soft start: no
- Protection of the engine from abrasive dust
Power: 720W
Disc diameter: 125mm
Speed: 10000 rpm
Maintaining constant speed under load: no
Soft start: no
- Additional vibration-proof handle
Power: 900 W
Disc diameter: 125mm
Speed: 11000 rpm
Maintaining constant speed under load: no
Soft start: no
Power: 1100 W
Disc diameter: 125mm
Speed: 11000 rpm
Maintaining constant speed under load: no
Soft start: no
Power: 2400 W
Disc diameter: 230 mm
Speed: 6600 rpm
Maintaining constant speed under load: no
Soft start: yes
Power: 1450 W
Disc diameter: 125mm
Speed: 11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
AEG angle grinders are ideal for grinding and cutting work in workshops, construction sites and renovations. Ergonomic design, light weight and 4 m long electric cable make the tool manoeuvrable and comfortable to work in hard-to-reach places.
Advantages of AEG Angle Grinder
- Reliability. quality components are used in the design, for example, closed-type bearings, a robust gearbox housing and other parts. Dust-proof vents are provided for efficient engine cooling.
- Safety. AEG angle grinder has a protective cover to prevent chips and sparks from entering the operator. Double insulation eliminates current flashovers to the case.
- Ease of tool change. due to the spindle lock, it is possible to quickly change the grinding and cutting discs. A number of tools have a FIXTEC quick-clamping nut.
- Convenience of work. in most models there is an adjustment of the speed of rotation of the disk, so it is easy to set up the tool to work with materials of different hardness. Also, the AEG angle grinder can be equipped with Digitronic electronics, which maintains a constant speed regardless of the load, ensures a smooth start, protects against overload (this feature is available on some models).
When to use the variable speed angle grinder
The main purpose is the processing of various materials. You need to grind metal at 2000. 3000 rpm, cut a stone at about 6000 rpm, for metal cutting you need to set from 7000 to 10,000 rpm. Wood is sanded at a minimum speed. from 2000 to 4000, depending on its density. If you try to work with wood at 6000 rpm, the part will turn black and the attachments will become unusable. But for cutting a bolt 15 mm in diameter, it will take already 8000 rpm.
angle grinder (angle grinder) with speed control
- FIXTEC keyless nut. work safety and quick change of equipment
Power: 1300 W
Disc diameter: 125mm
Speed: 2800-11500 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Maximum safety: double insulation and protection against accidental starting
Power: 1300 W
Disc diameter: 125mm
Speed: 2800-11500 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Automatic safety clutch Metabo S-automatic. for safety
Power: 1550 W
Disc diameter: 125mm
Speed: 2800-11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Best-seller! Long service life thanks to self-shutting off brushes
Power: 1500 W
Disc diameter: 125mm
Speed: 2800-10000 rpm
Maintaining constant speed under load: no
Soft start: yes
Power: 1300 W
Disc diameter: 150mm
Speed: 3000-9500 rpm
Maintaining constant speed under load: yes
Soft start: yes
Power: 1200 W
Disc diameter: 125mm
Speed: 3000-11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Super Joint System improves performance and safety
Power: 1200 W
Disc diameter: 125mm
Speed: 2800-12000 rpm
Maintaining constant speed under load: yes
Soft start: yes
- For heavy loads: SJS jerk protection and speed control
Power: 1400 W
Disc diameter: 125mm
Speed: 2800-12000 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Vibration Control on the handle dampens up to 40% vibrations
Power: 1700 W
Disc diameter: 125mm
Speed: 2800-11500 rpm
Maintaining constant speed under load: yes
Soft start: yes
- The Kick Back Stop system will instantly stop the engine if the rig is jammed
Power: 1200 W
Disc diameter: 125mm
Speed: 2800-11500 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Save time on tool changes. no wrench required
Power: 1300 W
Disc diameter: 125mm
Speed: 2800-11500 rpm
Maintaining constant speed under load: yes
Soft start: yes
- MetaboMarathon motor. overload capacity 20% higher than normal
Power: 1700 W
Disc diameter: 125mm
Speed: 2800-11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Slim handle fits perfectly in the hand. comfortable to work
Power: 950 W
Disc diameter: 125mm
Speed: 0-11000 rpm
- Engine speed control. for work with different materials
Power: 1250 W
Disc diameter: 125mm
Speed: 3000-12000 rpm
Maintaining constant speed under load: no
Soft start: no
Power: 1100 W
Disc diameter: 125mm
Speed: 3000-11000 rpm
Maintaining constant speed under load: no
Soft start: no
Power: 900 W
Disc diameter: 125mm
Speed: 2800-9000 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Long motor life due to automatic brush shut-off
Power: 1400 W
Disc diameter: 125mm
Speed: 2800-11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
Power: 1400 W
Disc diameter: 125mm
Speed: 3000-9500 rpm
Maintaining constant speed under load: yes
Soft start: yes
Power: 900 W
Disc diameter: 125mm
Speed: 0-11000 rpm
Maintaining constant speed under load: no
Soft start: no
- Smooth starting and overheating protection extend engine life
Power: 1520 W
Disc diameter: 125mm
Speed: 2600-11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
Power: 1100 W
Disc diameter: 125mm
Speed: 4000-10000 rpm
Maintaining constant speed under load: yes
Soft start: yes
- The aluminum-magnesium gearbox is resistant to damage and good heat dissipation
Power: 950 W
Disc diameter: 125mm
Speed: 3000-11000 rpm
Maintaining constant speed under load: no
Soft start: yes
Power: 900 W
Disc diameter: 125mm
Speed: 0-11000 rpm
Maintaining constant speed under load: no
Soft start: no
Power: 950 W
Disc diameter: 125mm
Speed: 0-11000 rpm
Maintaining constant speed under load: no
Soft start: no
Power: 1200 W
Disc diameter: 125mm
Speed: 3000-12000 rpm
Maintaining constant speed under load: no
Soft start: no
Power: 750 W
Disc diameter: 125mm
Speed: 3000-12000 rpm
Power: 860 W
Disc diameter: 125mm
Speed: 6000-11000 rpm
Maintaining constant speed under load: no
Soft start: no
- Additional handle with anti-vibration system for safe working
Power: 1750 W
Disc diameter: 125mm
Speed: 2800-11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
- VTC technology. constant speed operation even under load
Power: 1500 W
Disc diameter: 125mm
Speed: 3500-11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
- Maximum safety thanks to the Metabo S-automatic safety clutch
Power: 1550 W
Disc diameter: 125mm
Speed: 2800-11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
Power: 900 W
Disc diameter: 125mm
Speed: 2800-9000 rpm
Maintaining constant speed under load: yes
Soft start: yes
Power: 1400 W
BIHUI 5″ Variable Speed Angle Grinder
Disc diameter: 125mm
Speed: 2000-6800 rpm
Maintaining constant speed under load: yes
Soft start: yes
Power: 1200 W
Disc diameter: 150mm
Speed: 3000-9000 rpm
Maintaining constant speed under load: no
Soft start: no
- Constant electronics maintains RPM under load
Power: 1700 W
Disc diameter: 125mm
Speed: 2200-10500 rpm
Maintaining constant speed under load: yes
Soft start: yes
- KickBack Stop system. turning off the tool when the disc is jammed
Power: 1800 W
Disc diameter: 125mm
Speed: 2800-12000 rpm
Maintaining constant speed under load: yes
Soft start: yes
Power: 900 W
Disc diameter: 125mm
Speed: 3000-11000 rpm
Maintaining constant speed under load: no
Power: 1200 W
Disc diameter: 125mm
Speed: 6000-12000 rpm
Maintaining constant speed under load: no
Soft start: no
- Long service life thanks to armored winding
Power: 850 W
Disc diameter: 125mm
Speed: 2800-11000 rpm
Maintaining constant speed under load: yes
Soft start: yes
Power: 1500 W
Disc diameter: 150mm
Speed: 2400-8400 rpm
Maintaining constant speed under load: yes
Soft start: no
Power: 1100 W
Disc diameter: 125mm
Speed: 11000 rpm
Maintaining constant speed under load: no
Soft start: no
angle grinder with speed control. a tool with the function of setting a certain number of revolutions of the grinding, cutting or polishing wheel to select the optimal rotation speed for a specific material.
Parameters for selection of angle grinder with speed control
- The range of rotation adjustment. primarily depends on the maximum diameter of the nozzle. The smaller the disc, the faster it spins. For angle grinders 115 and 125 mm with adjustable speed, this parameter ranges from 2800 to 10,000. 12,000 rpm. The 150 mm disc angle grinder has a narrow range from 2300 to 9000 rpm. Most of the angle grinder with a 180 mm disc can change the number of revolutions from 3000 to 8000 rpm.
- Power. household angle grinders with adjustable speed of not more than 1200 W can work with discs of 115. 125 mm. Perfect for work no more than 30. 40 minutes a day: cut metal, wood, plastic parts up to about 50. 60 mm thick, depending on the diameter of the case of the angle grinder itself. Professional models are most often used with discs of large diameters (150, 180, 200 mm) and work for 4. 6 hours without interruption with a high power of 2000. 3000 W. By the way, the price for such a tool is an order of magnitude higher than for household.
- The soft start system will increase labor safety, especially if the maximum speed is set, and will allow you to start work accurately. The constant rpm function is important when machining hard materials so that productivity does not drop when the disc hits the material.
angle grinder AEG
- Disc diameter: 125mm
- Soft start: yes
- Power, W: 1300 W
- Maximum speed: 11500 rpm
- Weight: 2.4 kg
- Speed control: yes
- Disc diameter: 125mm
- Soft start: no
- Power, W: 800 W
- Maximum speed: 12000 rpm
- Weight: 1.9 kg
- Speed control: no
- Disc diameter: 230 mm
- Soft start: yes
- Power, W: 2400 W
- Maximum speed: 6600 rpm
- Weight: 5.6 kg
- Speed control: no
- Disc diameter: 125mm
- Soft start: no
- Power, W: 1200 W
- Maximum speed: 11500 rpm
- Weight: 2.4 kg
- Speed control: no
- Disc diameter: 180mm
- Power, W: 1200 W
- Maximum speed: 4800 rpm
- Weight: 2.5kg
- Disc diameter: 180mm
- Soft start: no
- Power, W: 2200 W
- Maximum speed: 8500 rpm
- Weight: 5.1 kg
- Speed control: no
- Disc diameter: 230 mm
- Soft start: no
- Power, W: 2100 W
- Maximum speed: 6400 rpm
- Weight: 4.9 kg
- Speed control: no
- Disc diameter: 115mm
- Soft start: no
- Power, W: 1200 W
- Maximum speed: 11500 rpm
- Weight: 2.4 kg
- Disc diameter: 230 mm
- Soft start: yes
- Power, W: 2200 W
- Maximum speed: 6600 rpm
- Weight: 5.8 kg
- Speed control: no
- Disc diameter: 230 mm
- Soft start: yes
- Power, W: 2400 W
- Maximum speed: 6600 rpm
- Weight: 5.3 kg
- Speed control: no
- Disc diameter: 125mm
- Soft start: no
- Power, W: 800 W
- Maximum speed: 12000 rpm
- Weight: 1.9 kg
- Speed control: no
- Disc diameter: 230 mm
- Soft start: yes
- Maximum speed: 5500 rpm
- Speed control: no
- Disc diameter: 230 mm
- Soft start: yes
- Power, W: 2400 W
- Maximum speed: 6600 rpm
- Weight: 5.6 kg
- Speed control: no
- Disc diameter: 125mm
- Soft start: no
- Power, W: 1000 W
- Maximum speed: 11500 rpm
- Weight: 2.3 kg
- Speed control: no
- Disc diameter: 230 mm
- Soft start: yes
- Disc diameter: 125mm
- Soft start: no
- Power, W: 1000 W
- Maximum speed: 11500 rpm
- Weight: 2.3 kg
- Disc diameter: 125mm
- Soft start: no
- Power, W: 1500 W
- Maximum speed: 11000 rpm
- Weight: 2.5kg
- Speed control: no
- Disc diameter: 125mm
- Soft start: yes
- Speed control: no
- Weight: 2.5kg
- Maximum speed: 9000 rpm
- Disc diameter: 125mm
- Soft start: yes
- Speed control: no
- Weight: 2.4 kg
- Maximum speed: 11000 rpm
- Disc diameter: 125mm
- Soft start: yes
- Power, W: 1520 W
- Maximum speed: 11000 rpm
- Weight: 2.5kg
- Speed control: yes
- Disc diameter: 125mm
- Speed control: no
- Weight: 2.6KG
- Maximum speed: 11000 rpm
- Disc diameter: 125mm
- Soft start: no
- Maximum speed: 10000 rpm
- Weight: 1.9 kg
- Speed control: no
- Disc diameter: 125mm
- Power, W: 1450 W
- Maximum speed: 2600 rpm
- Weight: 2.5kg
- Disc diameter: 230 mm
- Power, W: 2400 W
- Maximum speed: 6600 rpm
- Weight: 5.3 kg
- Disc diameter: 115mm
- Soft start: no
- Power, W: 1000 W
- Maximum speed: 11500 rpm
- Weight: 2.3 kg
- Disc diameter: 125mm
- Soft start: no
- Power, W: 1100 W
- Maximum speed: 11000 rpm
- Speed control: no
- Disc diameter: 125mm
- Soft start: no
- Power, W: 1200 W
- Maximum speed: 11000 rpm
- Weight: 2.3 kg
- Speed control: yes
- Disc diameter: 125mm
- Soft start: yes
- Power, W: 850 W
- Maximum speed: 10000 rpm
- Weight: 1.8KG
- Speed control: yes
- Disc diameter: 125mm
- Soft start: no
- Power, W: 900 W
- Maximum speed: 11000 rpm
- Weight: 2KG
- Speed control: no
- Disc diameter: 180mm
- Soft start: yes
- Maximum speed: 8500 rpm
- Speed control: no
- Disc diameter: 125mm
- Soft start: no
- Power, W: 1100 W
- Maximum speed: 12000 rpm
- Weight: 2.3 kg
- Speed control: no
- Disc diameter: 125mm
- Soft start: no
- Power, W: 900 W
- Maximum speed: 11000 rpm
- Weight: 2KG
- Speed control: no
- Disc diameter: 125mm
- Soft start: no
- Speed control: yes
- Weight: 1.84 kg
- Maximum speed: 9000 rpm
- Disc diameter: 125mm
- Soft start: no
- Power, W: 750 W
- Maximum speed: 10000 rpm
- Weight: 1.8KG
- Speed control: no
- Disc diameter: 125mm
- Soft start: no
- Power, W: 800 W
- Maximum speed: 12000 rpm
- Weight: 1.9 kg
- Speed control: no
Angle grinders AEG
For over 100 years, AEG Powertools has been creating tools for metal and wood working. The expanded assortment of the global brand is constantly being replenished with new, more perfect and unique models. In addition to improved ergonomics and high productivity, the machines and equipment have exceptional reliability and durability.
Each product unit contains several systems that ensure safety and an unprecedented guarantee of user protection.
Electric angle grinder AEG. guarantee of success
The expansion of the company’s model range is due to the introduction of innovative developments, each of which can be successfully called unique. The increased durability of all equipment units has made it possible to significantly extend the service life. Each successive model has the necessary degree of productivity and productivity, which allows them to be used on industrial sites, in construction or industrial workshops. The tool is capable of providing high speed processing of ceramics and metal, concrete and brick. The widest range of applications determines such a demand for universal equipment.
Tangible support from a German company
Angle grinders for maintaining professionalism
Each of the carefully thought out details meets the necessary safety standards in accordance with European requirements. The engine blocking button against accidental starting provides not only protection of the operator from disappearance and subsequent restoration of power in the network, but also of those around. The electric motor cannot start spontaneously without operator intervention. The oversized guard is equipped with a keyless clamping system. Now the technician can put on or remove the cover with one hand. Durable material reliably traps flying abrasive particles and protects the operator when cutting or grinding metal.
The AEG angle grinder, thanks to its powerful motor, operates at a high rotational speed of the cutting discs, which means that it gives the best characteristics for the speed of processing any surface. over, the low weight and small dimensions are intended for use with intense loads, including in confined areas and in narrow places. For the same purposes, a rotatable gearhead has been developed. The robust gear housing protects the internal mechanisms from collisions with obstacles and falls. Pre-machined gears ensure long-term use even in harsh conditions.
AEG angle grinders of modern design, can support the installation of several discs with different diameters, which expands the possibilities of the master. A spindle lock button with a safety mechanism is designed for quick tool change. The patented nut allows you to quickly and easily attach the desired disc. The soft start function ensures the correct acceleration of the rotating element, which has a beneficial effect on the quality of the operations performed and on the safety of the engine from overloads. The powerful motor is secured by a system that protects it from overheating. Large air vents help maintain the required thermal balance. The special coating of the motor windings prevents abrasive dust from entering the main parts of the machine.
the angle grinder of the presented brand has an anti-vibration system, which includes a special coating for the additional handle, rubber gaskets. As a result, long-term work of the foreman is accompanied by more comfort and less muscle fatigue. The second fulcrum provides confident control over the operation of the tool. Reduced body diameter facilitates better hand grip. An additional function of supporting the selected revolutions will allow the master to work without the use of physical efforts. The development of a flat body has increased the visibility of the working area and optimized the depth of metal cut.
The uniqueness of networkless aggregates
The AEG cordless angle grinder is a breakthrough in the field of cordless tools. High degree of freedom, no connection to stationary power supply. over, one battery pack is enough to use it in a whole line.
Li-Ion battery is designed for over a thousand working cycles, has increased voltage, no memory effect and large capacity, which increases the duration of continuous operation. The built-in charge level indicator will help the master monitor the discharge process and replace the battery pack in time.
AEG cordless angle grinders have the function of adjusting the rotation speed of the attachments. The regulator is located on the operating handle, on the power button. The large size of the key is designed for pressing with 2 fingers, which provides great ease of operation. over, small dimensions and weight allow you to hold the device with one hand. The LED backlight will help you cope with working in dark rooms and hard-to-reach places. Depending on the attachment, the tool is capable of performing various operations; the attachments are replaced without the use of special tools.
variable speed angle grinder
angle grinder is the most common name for angle grinders, which are widely used both in industrial and professional activities and in everyday life. The angle grinder gained its popularity due to its versatility, convenient use, as well as additional technical and functional characteristics, which are complemented by modern manufacturers.
Angle grinders are used for cutting surfaces and parts, cleaning, grinding (roughing and finishing), polishing surfaces. Among the materials that the device can handle, first of all, they call metal, concrete, wood, stone, plastic, etc.
The quality of the work performed by the device is affected by its technical characteristics and indicators.
Pay attention
When buying an angle grinder, pay attention to the following specifications, which will indicate the capabilities of the device:
- Power angle grinder. The power depends on how the angle grinder handles the loads. For long and continuous work, give preference to more powerful devices. Thus, they will not break down during operation. But for household tasks, devices with an average power, a low-power angle grinder are also suitable. In addition, high-power angle grinders are designed more for professional activities and their cost is much higher.
- Diameter of the working cutting disc. This indicator will determine the depth of the hole and cut that will be created by the device.
- Rotation speed of the device. Affects the performance, as well as the speed of the task.
angle grinder with speed control
Next
Additional functions
As mentioned above, the angle grinder can be professional and household. Professional (as well as some household) angle grinders have additional advantages, besides power, in use. Among them is the ability to adjust the number of revolutions of the device. This function is important for both the professional and the home craftsman. It allows you to select the correct speed for the material, thickness and cutting conditions. So, for less durable surfaces, you can cope with the task with a small number of revolutions, but for a metal surface, select the maximum speed and maximum number of revolutions.
Also, the angle grinder is supplemented with the functions of protecting the device from voltage surges, maintaining a constant speed, protection against repeated switching on of the device, fuses against switching on. An important addition is a smooth start-up and shutdown of the device, due to which there is no discomfort in the form of a strong shock when the device is turned on.
DeWALT DWE4257
- Electric motor power. 1500 W.
- Disk rotation speed. up to 10,000 rpm.
- Disc diameter. up to 125 mm.
- Weight. 2.6 kg.
Very powerful and ergonomic angle grinder. A vibration-absorbing handle is installed. Own dust removal system. The position of the cover can be adjusted without a key. Long cable.
Most craftsmen recognize the decisive factors when choosing an angle grinder:
- Convenience of working with the tool.
Choosing a smooth start angle grinder: highlights
Before buying a power tool, it is recommended to clearly determine what scope of work will be performed with its help:
- Daily use for several hours a day.
- Periodic work: several times a week for 2-3 hours.
- The tool is needed for home use. as needed.
In the first case, you should pay attention to models for professional use: these are powerful (more than 2-2.5 kW) and ergonomic angle grinder with smooth start, speed regulator. But the cost of such an angle grinder will be high.
For periodic work, it is enough to purchase an average power machine. about 2 kW. If the work will be performed with thin or soft metals and alloys, then 1.5 kW will be enough.
For use at home, in the garage or in the country, it is better to get a small 900-1000 W angle grinder. This is enough for most jobs: car repairs or small metal structures.
Before buying a power tool, it is recommended that you pay attention to important little things
- Cord length. Power cables that are too short will make your work uncomfortable. Even with a portable extension cord at hand.
- Handle. For long-term work, choose an angle grinder with a vibration-absorbing handle. This will reduce fatigue during work.
- Model type (for right-handed or left-handed people). a number of manufacturers produce an angle grinder that can be convenient for left-handers. with a non-standard position of the handles.
- Protection attachment. the casing is fastened either by bolts to the case or by latches, which allows you to quickly change its position. The rigid mount will force you to unscrew and tighten the screws every time.
- Type of brushes. carbon elements can pass through the body, then they are changed without removing the plastic parts of the angle grinder, in 2 minutes. If the brushes are inside the angle grinder, you will have to disassemble the tool.
- Clamping nut. there are ordinary ones, which are wrapped with a pin wrench, and sometimes with quick-clamping nuts. they are tightened by hand.
You should also pay attention to whether there is a manufacturer’s service center near the place of residence. This is important if a professional tool is purchased, it may eventually require replacement of parts.
Possible date of occurrence
With proper maintenance and careful handling, your angle grinder will last much longer. The table shows the statistics of service workshops
AEG WS 13-125 XE
- Electric motor power. 1300 W.
- Disk rotation speed. up to 11 thousand rpm.
- Disc diameter. up to 125 mm.
- Weight. 2.5 kg.
Convenient quick-release nut allows for quick wheel change. The angle grinder itself fits perfectly in the hand. There is overload protection. The only negative is that the cable becomes rigid in the cold.
RWS angle grinder-125/900
- Electric motor power. 900 W.
- Disk rotation speed. up to 11000 rpm.
- Disc diameter. up to 125 mm.
- Weight. 2.1 kg.
The power of the angle grinder is enough for work at home and in the garage. Low noise level and the electric motor works without vibration. Acceptable price. The only negative is the short cord.
Features of the device. Differences between models
The angle grinder (angle grinder) appeared in the middle of the 20th century and quickly became an important tool for manual metalworking. Its advantages:
- Versatility: the tool allows you to cut, clean and polish.
- Increased processing speed compared to hand tools and machine tools. this applies to small amounts of work.
- Ease of maintenance. no adjustment of the angle grinder is required, and its maintenance consists in periodic cleaning, blowing from dust.
- Small size allows you to carry the angle grinder around the work area.
But there are also negative aspects:
- Large parts and structures are difficult to handle.
- 220 Volt network required. However, cordless angle grinder is available.
- Failure to follow safety precautions can easily cause injury.
The angle grinder is an electric motor that transmits torque to the main shaft with fixing nuts through a gearbox. Circles are clamped in them: cutting, cleaning, polishing.
Standard sizes:
A type
Diameters: external / holes for installation, in mm
It is recommended to purchase models with a soft start. this option increases the resource of the motor. After pressing the button, the engine does not immediately reach operating speed, but with a slight delay. that is, it unwinds smoothly.
Adjusting the speed of the electric motor expands the scope of the angle grinder. the tool can be used for grinding and polishing surfaces. These operations are carried out at reduced speed.
Bort BWS-950
- Electric motor power. 900 W.
- Disk rotation speed. up to 12000 rpm.
- Disc diameter. up to 125 mm.
- Weight. 1.8 kg.
The main difference between the power tool is the smooth operation of the engine. Reliable and not very expensive angle grinder. Suitable for home or summer cottage.
BOSCH PWS 1000-125 CE
- Electric motor power. 1 kW.
- Disk rotation speed. up to 11500 rpm.
- Disc diameter. up to 125 mm.
- Weight. 2.1 kg.
Medium power tool, suitable for home use. Includes a plastic case. Cons: average ergonomics. the body is too thick.