What Can Be Done From An Angle Grinder With Your Own Hands

Fun things you can do with an angle grinder?

  • Circular saw (wood carving, if you attach a chisel with a special cutter, it is easy to adjust the depth of the saw);
  • Sharpening machine (sharpener for refueling a drill, grinding surfaces, cleaning and grinding metal, sharpening tools, knife sharpener);
  • Milling machine;
  • Wall chaser;
  • Grain crusher.

Homemade electric cultivator

What Can Be Done From An Angle Grinder With Your Own Hands

Those who are engaged in agriculture, as a rule, have in their arsenal such a technique as a cultivator. With the help of this equipment, it is possible to process the soil without turning out large layers of earth, not disturbing its fertile layer. The only and significant drawback of such a device is its price. Because of this, farmers in our country often use a hand or electric cultivator, which is made by hand from an angle grinder.

Required tools and materials

When starting to manufacture a cutting machine, it should be understood that the accuracy of its work is directly related to the stability of the structure. Therefore, the choice of a material of a certain thickness is dictated not so much by the requirements for the strength of the case, but by the need for its rigidity.

Before starting work, you need to prepare:

  • Profile pipe “square” (25x25x2.5 mm);
  • Profile pipe “rectangle” (40x20x2.5 mm);
  • Metal sheet 4–5 mm thick;
  • Ball bearings No. 202, 203 or 204. 2 pcs.;
  • Calibrated bar with a thickness equal to the bore diameter of the inner bearing race (up to 100 mm);
  • Bar with a diameter of 8-10 mm;
  • Metal bus (20×4 mm);
  • Bolts and nuts with M8 or M thread.

Of the tools you will need:

  • Angle Grinder;
  • Drill or drilling machine, set of drills;
  • A set of dies for cutting metric threads;
  • Open-end keys;
  • Welding machine.

For the manufacture of the machine, it is better to choose an angle grinder from a well-known manufacturer

The main unit of the cutting machine is the angle grinder. It is not recommended to use a “small” angle grinder designed for cutting discs with a diameter of up to 125 mm and a power of up to 500-600 W. Remember that the larger the diameter of the cutting wheel, the more versatile and reliable the machine will be.

The choice of power tools is also due to the wide variety of grinders on the market. Since such equipment is not standardized, the cutting machine is built for a specific model and size of an angle grinder. If the equipment is unreliable, then in the event of failure, it will be difficult to install another angle grinder in its place without the need to rework the mounts and the swingarm. That is why it is better to choose products from trusted manufacturers. Makita, Bosch and so on.

Cut-off machine / column of angle grinder

Cutting disc machines are very often used in the field of metal processing, mechanical engineering, furniture production, in the woodworking sector. This equipment is also suitable for household use. it is used as a very handy tool to carry out various works in the garage and workshop.

It is convenient to perform a variety of tasks on a cutting machine:
divide the metal profile into pieces of the required length;
cut sheet metal;
make the same type of workpieces in large quantities in a short time;
cut ceramic tiles;
cut parts at any angle, get cuts of the required length and depth.

Trimmer from angle grinder

Homemade trimmer using an angle grinder is not particularly difficult to manufacture. Its only drawback is the need for electricity, and a long extension cord. To make a trimmer from an angle grinder with your own hands, you will have to build a long and durable handle, from one edge of which, with metal clamps, you could fix the tool in question.

However, it would be best to play it safe and make a special metal mount with wheels for the installation of an angle grinder. At the top of the mount, a piece of pipe should be welded to connect a long plastic or wood handle. An important feature of the angle grinder trimmer is that for cutting grass, it is best to use not a line, but a thin cable.

Lawn mower from angle grinder

A lawn mower from an angle grinder has more reliability and safety. Such a tool for cutting grass is very stable and easy to use, it does not need to be carried in your hands all the time. There are countless designs of homemade lawn mowers and schemes on the Internet. However, they all boil down to the same.

The basis. for its manufacture, you can adapt an old unnecessary wheelbarrow to a kravchuchka or make it yourself from a piece of thick plywood, sheet steel and other materials. An angle grinder is securely fixed on top of the base, the shaft of which is threaded through the hole, down.

An adapter for installing sharp knives, which can be made from a thin steel sheet, is securely fixed on the shaft of the angle grinder. By the way, the design of such a lawn mower has already been described earlier, in the last issue of a construction magazine, an article about homemade products from the washing machine.

From above, it is better to immediately cover the angle grinder with a sealed case to avoid grass and debris from getting into the engine and gearbox. To control a homemade lawn mower from an angle grinder, you also need to provide an on / off button on the handle, in a convenient place, or an outlet for connecting an extension cord.

Where to use a burned-out angle grinder

An anchor angle grinder, if it cannot be restored, for example, when the lamellae or winding are damaged on it, it can be used to make a nozzle adapter for a screwdriver, drill, etc.

In principle, for this, the anchor has everything we need, namely:

  • Smooth surface and round shape;
  • A rod to catch on;
  • Sanding belt slots.

The principle of operation of such a drill bit is very simple.

You take and install it in the chuck, after which you start processing various workpieces with the nozzle. They can be made from materials such as wood, plastics, metal and even glass with ceramics.

Homemade from an angle grinder with a burnt out anchor

The motor and gearbox of the angle grinder can be made great attachments for work in the home workshop. But what if the motor of the angle grinder is completely out of order.

For example, I had one case when after buying an angle grinder, after a few days the armature winding was damaged. I don’t know what they did there, but since then I don’t buy cheap angle grinders.

In general, when cutting metal, an unpleasant smell of burnt plastic came out of the body of the angle grinder. Then sparks and the characteristic sound of an anchor jamming. Having disassembled the angle grinder, I found out that the armature winding was badly damaged, probably, the wire began to cling to the body during operation.

Just like that, buy cheap low quality angle grinder. They will not mention the manufacturer of the angle grinder, but I will only say that it is ours, domestic. In general, without thinking twice, I decided where to use an angle grinder with a burnt out engine. What happened, see below.

What homemade products from an angle grinder can be made?

Considering the high speed of the engine and its power, as well as the presence of a special gearbox, excellent machines and accessories come out of the angle grinder.

Perhaps you need to start with homemade products that will definitely come in handy in the household, for example, a homemade trimmer.

Work on the wireframe and ruler

The simplest frame will consist of frames mounted on one axis. The lower one must be fixed on the platform. If the tool is large, metal is best. An angle grinder is screwed to the upper frame, which will rotate vertically according to the principle of a pendulum. A spring is required to lock the home position.

A fastener is welded to the lower frame, which will consist of a clamping angle and a clamp. Measuring parts should be provided in the machine. In this case, a movable ruler with a stop is better suited. It is welded to the pipe.

Self-development to a cut-off machine

The simplest homemade product is a machine made from a small angle grinder. The work will be accompanied by a minimum of costs, and the manipulation will take a few hours. The outlet structure will be a long metal tube that serves as a handle and frame.

A transverse metal bar with two holes for fastening the tool is welded to one of the ends. On the same side, the pipe is fixed to the angle piece on the movable shaft. The first one can be fixed to the work table or to the floor in the work room. If you are faced with the question of what can be made of an angle grinder, you can perform a cutting machine following the described algorithm. According to him, on the opposite side of the mount, it is necessary to fix the spring, which will ensure the return of the structure to its original position. At the end of this stage, you can use your homemade product. It will only be necessary to correctly install the device.

This version of the machine is the simplest solution for metal processing, while complex work will require precision, therefore, the design for solving such problems must be made more stable, which means that work will have to be approached more thoroughly.

Making a miter box

You now know what can be done from a burnt-out angle grinder. But if the tool is not out of order, and you want to expand the range of tasks it performs, you can make a miter box. For this, the table top is made to rotate. This will allow you to cut a baguette, plinth or profile from different materials at a certain angle.

The table top is installed at an angle, the corresponding disc is mounted, then the cutting is carried out, which turns into a pleasure. With the help of such a homemade machine, you can cut paving slabs diagonally, thereby diversifying the ways of laying it.

Features of making homemade products from a broken tool

The angle grinder is not an eternal thing, so after it breaks down, you can use the equipment for other homemade products. Sometimes it happens that a motor or gearbox breaks down. The body may break or the gear teeth may be cut. However, you should not rush to throw away the device. One of the two units of the angle grinder can still work.

If you’re deciding what to do with a broken angle grinder, the engine should be considered. But due to its high speed, it is not often suitable for rework. This part of the angle grinder can be used as a basis only if an engraver is made. You will need to cut off the gearbox and fasten the chuck to the shaft for different nozzles, there are a huge number of them on sale.

If you are still interested in the question of what can be made of an angle grinder that has an engine flying, you can use a gearbox. It is metal, compact and has a powerful bearing on the output shaft. Due to the existing threaded connections, the gearbox has good mounting possibilities. The reducer can be mounted on a drill using a special adapter. But on such tools, the cut-off wheel can be source of danger. Therefore, it is recommended to adapt the gearbox to situations that are far from the original function of the angle grinder. For example, you can make a sander for wood flooring. You can comfortably carry out this dusty job thanks to the speed control and bevel gear. Large area can be covered with a wide disc, which speeds up the process.

Quite often, home craftsmen think about what can be made from an angle grinder gearbox. The tapered assembly is compact, so it can be used for a variety of tuning and adjustment tasks. For example, to adjust the working table on the machine. The gearbox is widely used to create outboard motors. The issue of sealing the propeller shaft can be solved by sealing. Outside the gearbox, an additional oil seal can be installed on the propeller shaft under the trim ring. But in the case of motorized bicycles, an oil seal is not needed.

But if you are still interested in the question of what can be made of an angle grinder, you can use its gearbox by transferring torque to the wheels. The described unit is installed on the wheel axle. Applying a traditional chain, a protective standard casing, you can adapt it as a geared motor holder. The electric motor is not limited to using an internal combustion engine. The angle grinder gearbox in this case will be able to withstand even high loads.

When thinking about what can be made from an angle grinder, you might consider making a coffee grinder. It is suitable for lovers of an active lifestyle who prefer from time to time to sit in the silence of the forest with a cup of fragrant freshly brewed coffee. You don’t have to think about the engine, because the mixer has a special shaft that rotates custom nozzles.

Electronics

In order to make the work more convenient, the design should be supplemented with a switch button or a start pedal. In the first case, a low-voltage relay is used, through which voltage will be supplied to the instrument. This uncomplicated design will allow you to free your hands and achieve an even cut without the use of a vice. On this you will also save time, because you do not have to make accurate measurements.

Making a machine with a bed

You can also make a cutting machine from an angle grinder. For this, the following tools and materials should be prepared:

  • Profile pipe;
  • Steel corner;
  • Metal sheet;
  • Welding machine;
  • Drill;
  • Channel;
  • Bearings;
  • Shaft;
  • Pipe;
  • Spring;
  • Relay pedal.

If desired, the sheet of metal that will go to the platform can be replaced by chipboard. The stove will become an easier option. There should be several bearings, they should be the same. If you think about it, welding can be replaced with solid bolts, which is what you need a drill for. This option will allow you to disassemble the machine if necessary.

Making a wall chaser

What can be made of an old angle grinder? This question is often asked by home craftsmen. But if your angle grinder is working properly, you can make a chasing cutter out of it. By using equipment without modification, you put yourself in danger. In order to avoid risk, you can make a nozzle with a solid base, it will allow you to make cuts in the walls for the entire diameter of the disc.

This addition is a foot in the form of a stop that allows you to move the tool along the wall. The efforts will be uniform. When you make such a device, take the time and install a closed cover, which will be complemented by a branch pipe for connecting a vacuum cleaner.

What can be done from an angle grinder with your own hands: homemade ideas

Angle Grinder. This tool is quite useful in everyday life and at work. With its help, you can perform a wide range of work. An angle grinder allows you to cut stone, metal, tiles, grind surfaces, etc. But many home craftsmen are wondering what can be done from an angle grinder with their own hands.

If you happen to be among those who wondered what can be done from a broken angle grinder, you can consider the examples provided above. Among other proposals, one should highlight: an engraver, a grinder, a boat motor, etc. With the help of the gearbox of the described tool, even a motorized bicycle can be modified.

How to make your own circular from an angle grinder

From time to time, a home workshop requires a tool such as a circular saw. However, for these infrequent tasks, buying a saw is not profitable. In this case, it is recommended to make a circular saw driven by an angle grinder. This option is much cheaper than buying a factory saw for a couple of hours. You can see an example of such a homemade product here.

Angle Grinder Powered Electric Bicycle

Today we will look at how to assemble a full-fledged electric bike with our own hands, using an angle grinder as a drive.

The author of this design is Alexander Kryukov. He, together with a company of like-minded people, assembled this model of a bicycle with their own hands from a grinding machine and scrap materials. You can read about this bike here.

Cut-off machine / column of angle grinder

Cutting disc machines are very often used in the field of metal processing, mechanical engineering, furniture production, in the woodworking sector. This equipment is also suitable for household use. it is used as a very handy tool to carry out various works in the garage and workshop.

It is convenient to perform a variety of tasks on a cutting machine:
divide the metal profile into pieces of the required length;
cut sheet metal;
make the same type of workpieces in large quantities in a short time;
cut ceramic tiles;
cut parts at any angle, get cuts of the required length and depth.

Homemade lawn mower

Instead of a new lawn mower, it is quite possible to assemble a model with your own hands. for this you need an angle grinder and straight arms.

Such a lawn mower is less powerful and with a small size. In most cases, instead of knives, special fishing lines are installed on it in order to cut the grass. this is shown in the photo. The mower from the angle grinder is convenient because the tool can be easily removed and used for its intended purpose. How to make a lawn mower from an angle grinder is described here.

Homemade wood trimmer

With the help of a miter saw, the summer resident will greatly simplify his life. A saw of this type is offered in all building supermarkets, but a proprietary cross-cut saw is very expensive.

In order not to buy such a tool, it can be assembled with a broach, using improvised material and old tools that almost every owner has in his arsenal. Now we will see how you can assemble a homemade miter saw with your own hands. An example of making a miter saw can be seen here.

What can you do with an angle grinder: DIY from an angle grinder

The angle grinder is excellent for use on a stationary machine and as a more accurate tool, and as a motor with a gearbox for all kinds of homemade products. The angle grinder is very often used for construction, repair, and installation tasks. an angle grinder is advantageous in that the number of applications increases with the number of attachments used.

Homemade electric cultivator

Those who are engaged in agriculture, as a rule, have in their arsenal such a technique as a cultivator. With the help of this equipment, it is possible to process the soil without turning out large layers of earth, not disturbing its fertile layer. The only and significant drawback of such a device is its price. Because of this, farmers in our country often use a hand or electric cultivator, which is made by hand from an angle grinder.

Do-it-yourself wall chaser from an angle grinder

The angle grinder can be used for tasks such as cutting cuts in a wall. These are cuts for laying wiring, pipes, and other elements. If you take a stock angle grinder for such work, it is very difficult to control the immersion depth of the disc. To solve this problem, a special frame can be made.

Such a frame is made in the form of a sole with a stop, with which the tool can be moved along the wall with a uniform deepening. Thus, the strobe of the desired depth will be learned. To make such a wall chaser, you need to remember about such details as a protective cover and a special dust collector. For the latter, a bag can serve, but it will be more convenient to connect a hose from a vacuum cleaner.

Angle Grinder , , , ,