What Gasoline To Fill In The Husqvarna Trimmer

Gasoline for lawn mowers: which one to choose and how to dilute? Use a specific brand of gasoline for lawn mowers and dilute it with special quality oil. What fuel can I put in a two-stroke trimmer? Maintaining the correct proportion of the mixture will extend the service life of your equipment.

Fuel ratio

If the mixture is diluted correctly, for example, following the instructions below, the equipment will serve you for more than one year without serious technical breakdowns. At the same time, fuel consumption will be low, and the result of work will be high. The fuel preparation process must always be the same and constant. It is better to use the same ingredients always, without changing the brand indicated by the manufacturer.

It is not worth adding a lot of oil, it can damage the operation of the engine, but you should not save on it either. To maintain the correct proportions, always use the same measuring container, so as not to be mistaken with the quantity. Medical syringes can be used to measure the oil, but some manufacturers, along with the oil, provide a measuring container with risks in the kit.

The most correct ratio of oil to gasoline is 1 to 50, where 50 is the amount of gasoline and the amount of oil is 1. For a better understanding, let us explain that 1 liter is equal to 1000 ml. So, to get a ratio of 1 to 50, divide 1000 ml by 50, we get 20 ml. As a result, only 20 milliliters of oil need to be added to 1 liter of gasoline. To dilute 5 liters of gasoline, you need 100 ml of oil.

In addition to maintaining the correct proportion, you must also follow the mixing technology of the ingredients. In no case should you just add oil to the gas tank. It is better to follow the following step by step instructions.

• To dilute the mixture, you must prepare in advance a container in which you will mix gasoline and oil. This can be a clean metal or plastic canister with a volume of 3, 5 or 10 liters to make it easier to calculate the amount of oil. Do not use drinking water bottles for this purpose. They are made of thin plastic that can dissolve from gasoline. Use a special measuring container to measure oil. But if there is none, then, as already noted, medical syringes with a large dosage will do.
• Pour gasoline into the canister, without adding a couple of centimeters to the full volume. In order not to spill gasoline, take a watering can or insert a funnel into the neck of the canister. Then take the required amount of oil into a syringe or measuring device and pour it into a container with gasoline. It is not recommended to do the opposite. Pouring gasoline into oil.
• Close the bottle tightly and stir the mixture. If, during the preparation of the mixture or its mixing, part of the fuel spills out, you must immediately wipe the canister with a dry cloth.
• Be sure to follow fire safety measures. Dilute the mixture away from fire and never leave leftover fuel or used materials within easy reach of children.

What gasoline can I put in the trimmer?

Before determining which gasoline to fill the trimmer, it is necessary to define some of the concepts used.

• Trim tabs can be with four-stroke or two-stroke engines. Four-stroke trimmers are the most powerful and complex in design, lubrication of parts of its engine is carried out by an oil pump. The engine runs on pure gasoline. For two-stroke units. Simpler ones. Preparation of a fuel mixture consisting of gasoline and oil is required. It is due to the amount of oil in the fuel that the rubbing parts in the cylinder of this engine are lubricated.
• To prepare the mixture, you need a certain grade of gasoline AI-95 or AI-92. The brand of gasoline depends on its ignition speed. Octane number. The lower this indicator, the faster gasoline burns and the greater its consumption.

Many models of lawn mowers have two-stroke engines that run mainly on AI-92 gasoline. The fuel for them must be mixed independently. It is better to pour gasoline of the brand specified for it by the manufacturer into the lawnmower, otherwise the trimmer will fail faster. For example, with AI-95 gasoline, the engine will overheat quickly, and when choosing AI-80, the fuel mixture turns out to be of very low quality, so the engine will work unstable and with low power.

In addition to choosing a brand of gasoline, when preparing a fuel mixture for lawn mowers, you need to use a special oil designed specifically for two-stroke engines. Semi-synthetic and synthetic oils work well for lawn mowers. Semi-synthetic oils are in the middle price range, suitable for such equipment from any manufacturer, they lubricate the necessary elements of the motor well. Synthetic oils are more expensive, but they will keep the engine running longer. In any case, when buying equipment, you should carefully read the instructions, since sometimes the manufacturer gives recommendations on the use of specific brands of oil.

Gasoline for lawn mowers: which one to choose and how to dilute?

For those people who have a summer cottage or a country house, very often there are difficulties with the overgrown grass on the site. As a rule, it is necessary to mow it several times per season and get rid of thickets. A wide range of garden and vegetable garden equipment is currently on the market. One of these assistants can be attributed to a lawn mower, in other words. A trimmer. For effective and long-term operation of such equipment, it is necessary to fill it with high-quality fuel or properly prepared fuel mixtures.

Features of the Husqvarna 128R lawn mowers

• Convenient two-handed oblique control handle. Resembles the shape of a bicycle handlebar. The two-handed grip is optimal for long work, the load is evenly distributed between the two hands and your back will not hurt from overload.
• E-Tech II system. Designed to reduce the emission of harmful substances into the environment, in accordance with EU environmental standards, and does it perfectly. But on top of that, fuel consumption is reduced.
• It is completed with a spool with a fishing line, ideal for mowing light grass, and a steel knife that will cope with tall, hard grass, medium shrubs, tree growth. In short, you choose the optimal attachment for your work.
• Ergonomics of management. At the highest level, all control is literally in your hands, this is the on-off switch and the gas lever.
• To make it easier to start the engine, the Smart Start system is installed on the unit (reduces the torque), now you can easily start the trimmer with ease.
• We recommend setting the line on the trimmer head no more than 2.4 mm.
• Modest dimensions and weight 4.8 kg. Will allow you to transport easily and there will be no difficulties with storage.
• Electronic ignition system, provides easy engine start.
• Since a two-stroke engine is installed on the gasoline trimmer, the unit is fueled with a mixture of AI-92 gasoline plus a fuel additive. The proportions of the mixture are 1 proportion of additive and 50 (or 40) proportions of gasoline, i.E. 5 (or 4) liters of gasoline are mixed with 0.1 liters of the additive, depending on the brand of the additive. Be sure to observe the proportions of the mixture, the engine resource directly depends on the quality of the mixture. And it is recommended to store the finished mixture for no more than 1 month, so calculate how much you use the mixture before mixing so that you do not pour it out later. Filling the lawn mowers with clean gasoline and running on it will cause the piston group to jam. In this case, the warranty does not apply.
• Solid steel shaft that transfers torque from the motor to the gearbox. As a result, the reliability of the unit is increased.
• Complete set: spool with fishing line, steel knife for cutting dense thickets and small bushes, three-point backpack shoulder strap (the load of the scythe is evenly distributed over two shoulders) and plus plastic thigh protection.
• One year warranty from the date of purchase.

A great 2-stroke lawnmower for semi-professional use in medium-sized areas, perfect for areas with uneven landscapes, when working on the lawn, along fences, paths and roads, around houses and in hard-to-reach places where lawnmowers cannot mow. Equipped with a high quality 1.1 hp engine. This scythe can be classified as a farmer’s tool class, which is suitable for both landscapers, landscaping specialists and simply for needs in their garden.

Specifications

Engine rated power	0.8 kW. / 1.1 hp
Cutting equipment	fishing line / metal knife.
Mower class	farmer (semi-professional).
Rod type	one-piece straight.
Drive shaft	hard steel.
Handle (steering wheel)	bicycle (two-handed).
Mower control	The throttle lever is on the steering wheel. The ignition button is on the steering wheel.
Steering wheel adjustment	horizontally and vertically.
Engine starting	manual starter.
Easy engine start	is (Smart Start).
Fuel type	AI-92 gasoline additive.
Fuel tank capacity	0.4 liters.
Engine capacity	28 cm3.
Engine model	Husqvarna.
Engine’s type	two-stroke with the E-Tech II system (reduced harmful exhaust and fuel consumption).
Engine cooling	airy.
Line cutting width	45 cm.
Possibility to install additional equipment	not.
Equipment	– Spool with line. Metal knife. Knapsack shoulder strap. A set of keys. User’s manual.
Packaging	cardboard box.
Manufacturer country	Sweden-USA.
Weight	4.8 kg.
Guarantee	1 year.

Oil selection and fuel mixture for lawn mowers

So, have you finally become the owner of a petrol lawn mower or lawn mower? And your imagination is already creating images of how you courageously cope with the dense grass. However, the dream of a “perfect lawn” remains a dream, when the question involuntarily arises: what oil to use and what are the proportions of mixing it with gasoline?

You can find a lot of information on the correct preparation of the fuel mixture on the Internet. This topic is actively discussed on forums and other thematic resources. But, despite such an active discussion, there are many inconsistencies that have to be dealt with.

In fact, it doesn’t matter what technique is used, it can be a lawn mower, a lawn mower or a chain saw, they are united by a one-two-stroke gasoline engine. Unlike the 4T, it does not have an oil sump. It requires the preparation of a special fuel mixture, consisting of gasoline and oil. The resulting liquid is fed directly to the engine (carburetor). In the process of use, all actively working parts are thoroughly lubricated, contributing to trouble-free operation under all operating conditions.

Lawn Mower Engine Oil

Depending on the chemical composition, lubricants are divided into the following main groups:

Mineral. They are made on the basis of oils obtained from petroleum distillates. They are characterized by high viscosity and require frequent replacement. The material is intended for low power appliances with an air cooling system. Recommended for use in warm weather.

Semi-synthetic. They represent a kind of “golden mean”. They are based on a mixture of mineral and synthetic oils. A similar lubricant can be used in 2T and 4T engines, gardening and other equipment with air and liquid cooling.

Synthetic. They are made on the basis of special synthetic components containing esters. They are characterized by low viscosity and long service life. Can be used all year round, regardless of temperature conditions. Ideal for demanding, demanding applications with constant variable performance.

Any two-stroke oil, due to its 20% solvent composition, mixes well with fuel and has the feature of complete combustion. Their second characteristic feature is the color, which can be green, red or blue. Of course, this does not mean that some lubricant is better, but some worse. This is done solely so that it is convenient for the user to distinguish oil from pure gasoline.

The required parameters of oils for 2T engines are prescribed in the requirements of API TC JASO FC, API TC JASO FC ISO GD and API TC JASO FC E-GC. The most widely used classification systems are API. Based on this, 2T engine oils are divided into 4 large groups:

Ta. Suitable for household appliances with an air cooling system and an engine volume of no more than 50 cm3.

Tb. Used for more powerful equipment with an air cooling system and a motor volume of 50.200 cm3.

Tc. Used in technology with high demands for oil quality. It is a high quality lubricant for two-stroke engines of 50.200 cm3. Great for lawn mowers, lawn mowers, trimmers, chain saws and other garden equipment.

Td. For outboard boat motors with liquid cooling.

Most suitable material for 2T motors of API-TB and API-TC class. However, it is necessary to refer directly to the product passport, where the manufacturer indicates the brand of engine oil recommended for its equipment.

Important! For lawn mowers, lawn mowers and other 2T gardening devices, there is a special engine oil for two-stroke engines with an air cooling system and the mark “for gardening equipment”. Do not use lubricant for 2T liquid-cooled engines. Also not recommended for outboard engines, motorcycles and other equipment.

Lawn Mower Oil to Gasoline Ratio: Why is Accuracy Important?

All of us in childhood loved to “cheat”, so the process of preparing a fuel mixture is not only simple, but also interesting. First of all, it is worth considering the fact that the proportions of the mixture may be different. This depends on engine configuration, oil markings and manufacturer recommendations. The fact is that with an insufficient amount of lubricant, the cylinder and piston heat up, which leads to shallow scuffing of all rubbing surfaces and, consequently, to the failure of the cylinder. Piston group. Well, in the case of its excess, on the contrary, we get coking of the piston ring and the formation of a large amount of carbon deposits.

And even in spite of the fact that there is a generally accepted mixing ratio of 2% (for every liter of gasoline, 20 ml of lubricant). The proportions in the mixture are still recommended to be kept exactly.

How much oil to pour into lawn mower gasoline?

Everything is quite simple, with the right balance, the engine runs at full capacity, all parts are thoroughly lubricated and do not wear out. As a result, we get a confidently working technique that will last more than one season.

To know how much oil to add to your lawn mower, you need to familiarize yourself with the performance of the product. Proportional ratios can be presented as follows: 1:25, 1:40 and 1:50, which means 1 part of oil for 25, 40 or 50 parts of gasoline.

1 liter of gasoline = 1000 ml

To determine the required amount of oil for a ratio of 1:25, you need 1000/25 and we will get a ratio of 40 ml.

We carry out the same actions for the ratio 1:40 and 1:50:

1:40 (for 1 liter of gasoline 25 ml of oil)
1:50 (for 1 liter of gasoline 20 ml of oil)

To ensure the correct proportion of lawn mower oil, it is recommended to use a special measuring container (not plastic). Eliminate the possibility of dirt and water getting into the fuel mixture. This may affect its quality. It is better to start preparing the mixture with gasoline. Pour it up to the required mark, then add oil. For mixing, just a couple of tilts of the container The liquid quickly combines and acquires a uniform hue, which, depending on the structure of the oil, can be red, green, blue or other. After that, the properly prepared mixture is poured into the equipment fuel tank.

Before using the equipment, make sure that the tank cap is tightly closed. If you get more fuel, then the remainder can be stored in a special canister or mixing container (no more than 14 days). It is recommended to drain the unused fuel.

Important! Be sure to follow the safety instructions. Mix fluids outdoors to prevent corrosive gasoline fumes from accumulating indoors. Wear gloves and long sleeves. Do not smoke or ignite anything.

Petrol

Gasoline with an octane rating of AI-92 is considered the most popular fuel for two-stroke engines. Due to its relatively low cost, it is extremely rarely falsified. Therefore, not one hundred percent, but you can be sure of its quality. It is also permissible to use AI-95 fuel.

As for the storage of fuel, its period should not exceed 3 months. Over time, gasoline loses its properties, the resin becomes higher and a polymerization process occurs, which adversely affects the combustion chamber. The fuel mixture for lawn mowers made from low-quality materials settles in the form of carbon deposits, as a result of which the main components and systems of the engine suffer.

Recommendations for use and storage

The fuel is ready, poured into the fuel tank, the first spurt and the long-awaited start. However, if you want the equipment to work as long as possible, it is recommended to run it in for the first time. To avoid overheating the engine, it is recommended to adhere to the average load. After the main elements of the system have been thoroughly lubricated, the load can be increased.

Certain rules should also be followed when preparing the braid for off-season storage:

Drain the remaining fuel from the fuel tank and carry out the final run until the fuel is completely depleted. Then, pause operation and make sure the engine is completely cool.

Unscrew the spark plug carefully and add about 5 ml of lubricant. Pull the starter handle slowly to distribute the oil evenly inside the engine. After that, return the candle to its original state. Store equipment in a cool dry place.

What gasoline to pour into a popular brand chainsaw

A chainsaw is a handy unit that can solve a lot of everyday problems. It runs on fuel that you need to prepare yourself just before filling it into the tank. Those who purchased a functional device for the first time are interested in the question of which gasoline to pour into the chainsaw. Avoid breakdowns and extend the life of the device only if the manufacturer’s recommendations specified in the instructions are followed.

What gasoline to fill?

Modern brands of chainsaws (Husqvarna, Partner) from foreign manufacturers will run smoothly on AI-92 gasoline. It will ideally match the engine. The user manual may also show grade 95, but this must be filled with care. The quality of this gasoline is currently being questioned, its octane number is increased with the help of various additives. This is detrimental to the chainsaw engine, which can lead to a major overhaul of the unit. And its cost will be at least half the cost of a new model, excluding spare parts to be replaced.

Gasoline and oil proportions

In view of the two-stroke type of engine, fuel is purchased separately in a pure form, after which it is mixed with oil intended specifically for this engine version. Most experienced users mix the substances in proportions 1:50. In the photo you can see the popular high quality products used for the preparation of the fuel mixture.

Important points to observe:

• Domestic chainsaws (Ural, Stihl, Druzhba) work with an oil component of the M8-B, M-12TPU, M8-B, TP, MGD-14M brands, sometimes foreign versions can be used; the recommended proportion is 100 g of oil per 2.5 liters of AI-80 gasoline;
• Foreign models (Husqvarna, Partner) run on foreign-made oils (1:50 or 1: 40), differ in a minimum consumption.

Useful Tips

Experts and manufacturers do not recommend storing large amounts of fuel and storing it for a long time. Oil and gasoline can behave differently in a mixture, it all depends on the brand, quality, degree of additives and additives. Oxidation and crystallization processes take place. The result can be disastrous and incur additional financial costs for the user: incorrect operation or engine failure.

What kind of gasoline should I put in my lawn mower?

What kind of gasoline should I put in my lawn mower? This question often arises from the newly minted owners of this technique. As a rule, this information is presented in the technical documentation of the device, but it is worth knowing about the possible options.

What gasoline to pour into the mower depends on the type of engine. It can be two- or four-stroke. Consider the features of both motors.

The fuel preparation process is quite simple: as a rule, for mineral oils, the ratio to gasoline is 1:32. 1:35, for synthetic. 1:50 as indicated on the package.

To keep your petrol lawnmower with fuel for the entire season, you only need to hover it once. To do this, take, for example, a five-liter canister and add 100 ml of oil to it. If this amount is not enough for you, repeat the procedure again.

What gasoline should I put in my four-stroke lawnmower?

And now let’s tell you what kind of gasoline to pour into a lawn mower with a four-stroke engine, the main difference of which is the presence of a crankcase. It contains oil for lubricating the engine, therefore, for this type of apparatus to function normally, it is enough to fill it with gasoline only. However, there are some peculiarities here. Since the equipment does not have an oil filter, which means that it cannot be cleaned, it must be changed approximately every 50 hours of operation.

As for the gasoline that you need to refuel the mower, it should not be of a higher grade than that recommended by the manufacturer of the equipment. Since the higher the octane number, the longer the fuel burns. This, in turn, can lead to significant problems and premature tool failure.

It is well known that gasoline is a very flammable substance and its vapors are explosive. Based on this, we recommend that you always follow a few simple rules that will ensure the safety of each user:

• Allow the engine to cool before refueling.
• Fill in only 92nd gasoline (not lower);
• Do not work with fuel if there is an open fire nearby, and smoking is also prohibited.
• To avoid exhaust gas poisoning, refuel and start up outdoors or in a well-ventilated area.
• It is not recommended to fill the tank completely; it is imperative to leave room for the “expansion” of gasoline, which always occurs when it heats up.
• Try to keep fuel away from your clothes and shoes.

In general, the maintenance of the gasoline engines of the lawn mower. A fairly simple matter that does not require any special knowledge and skills from you. For units with a two-stroke engine, you need to learn how to properly prepare the combustible mixture, as well as clean the air filter in a timely manner. For machines with a four-stroke engine, it is enough to change the oil annually and clean the air filter so that it will serve you faithfully for many years.

It is profitable and convenient to cooperate with us, because we:

If you still could not decide which gasoline to pour into the lawn mower, ask your questions to our specialists by phone: 7 (495) 135-29-39 every day from 10.00 to 20.00. They will provide all the necessary information for free.

What gasoline should be used for 2-stroke technology

My advice to you. Never listen to “Petrovich” or “Mikhalych” from a nearby garage, because he worked for 10 years at Kamaz. For you, the most important and authoritative adviser should be the instruction manual, which is attached absolutely with every chainsaw or lawn mower. Any instruction “black on white” indicates the type of fuel that must be poured into your vehicle.

And therefore, whatever “Petrovich” and “Mikhalych” tells you, the manufacturers of the equipment probably know better than them what gasoline their saws and scythes are designed for. So don’t be lazy, get out the instructions and read. On my own I will add that most two-stroke vehicles are designed for the A-92 brand of gasoline, but there are some models for which the manufacturer recommends using the 95th gasoline.

Again, strongly, I recommend not playing the guessing game. And see instructions manual, since the use of fuel that is not intended for the operation of your equipment can lead to overheating and various expensive breakdowns.

What gasoline and how much oil should be poured into
lawn mowers and chainsaws

This is one of the most common questions from my clients, so let’s take a closer look at this topic. For simplicity, let’s split this question into two sections: what kind of gasoline should be filled and how much 2-stroke oil should be added.

How much 2-stroke oil is needed for 1 liter of gasoline

Let’s immediately understand that if we are talking about oil in a conversation about 2-stroke technology, then this is an exclusively special oil that is added to the fuel. No other oil like 10W-40, 5W-30, etc. In two-stroke engines NOT USED. Failure to comply with this condition is guaranteed to lead to engine breakdown with a complete replacement of the piston group.

Now let’s figure out what kind of oil to pour and in what proportion to knead it.

If your equipment is under warranty service, then there is nothing special to think about. Pour oil from the manufacturer of which you have the technician.
If you have a Sadko chainsaw, pour their original oil, if GoodLuck, pour Goodluck two-stroke oil, etc., because if you do not comply with this requirement, you will simply be denied warranty service in the event of a breakdown of equipment.

Now let’s talk about the proportions of oil and fuel. As in the previous section, the main criterion for you should be the instruction manual, where the manufacturer indicates clear proportions of the mixture. For each brand of chainsaw or lawn mowers, the proportions may be different, since the equipment is designed for different working conditions and loads. Therefore, follow the recommendations of the equipment manufacturer.

If you use oils of the wrong brand as your equipment, then you should mix the fuel mixture based on oil manufacturer recommendations, as a rule, the proportions are indicated on the oil can.

I also want to focus on specific numbers, as users often misunderstand the numbers. For example, if the manufacturer indicates that oil and fuel must be mixed in a ratio of 1:50, then this means that 1 liter of oil must be added to 50 liters of fuel, that is, 1 liter of gasoline must be poured 20 ml. Oils, because very often a misunderstanding of these proportions leads to the fact that 1 liter. Pour 50 ml of gasoline. Oil, which leads to the formation of very strong carbon deposits, smoke and “throwing” of the candle.

For those who are not math friendly:

1:50 (for 1 liter of fuel. 20 ml of oil)
1:35 (for 1 liter of fuel. 30 ml of oil)
1:30 (for 1 liter of fuel. 35 ml of oil)
1:25 (for 1 liter of fuel. 40 ml of oil)

Output: always follow the recommendations of your manufacturer regarding the brand of fuel and the proportions of the mixture, if you are not sure about something. Contact the official representative of your brand (phones are always indicated on the warranty card).

Remember that the fulfillment of these conditions is the key to a long and stable operation of your equipment.

What gasoline is needed for a trimmer

Mototrimmers equipped with a two-stroke engine do not have a separate oil supply system for lubricating rubbing parts. Therefore, they need to be filled not with pure gasoline, but with its mixture with engine oil. Remember that the oil must be special, designed for two-stroke engines. Using automotive engine oil can damage the instrument.

Trimmers with a two-stroke engine should be filled with AI-92 gasoline. Of course, it will be able to run on gasoline with a higher octane rating. But when refueling with AI-95 gasoline, the engine will overheat and run unevenly.

Mix oil and gasoline in the correct proportion. If there is too little lubricant, seizures will appear on the surface of the piston and cylinder walls, then the piston ring will collapse, and the engine will jam. An excess of oil is not so critical, but it will also lead to unpleasant consequences. Carbon deposits will form on the piston, and the piston ring will coke, which will lead to a drop in power.

Usually, the proportions of gasoline and oil are indicated in the instructions for the tool. Many manufacturers prescribe a 50: 1 ratio. One part oil is poured into 50 parts of fuel. Therefore, there should be 20 ml of oil per liter of fuel. If the engine is worn out or the tool is under heavy load, the amount of lubricant can be increased to 25: 1 by pouring 40 ml per liter of gasoline.

 

• What gasoline is needed for a trimmer
• How to choose a lawn mower
• How to choose a petrol trimmer

The grade of gasoline suitable for a particular tool model is usually indicated in the instruction manual. If you ignore the manufacturer’s recommendations and fill the tank with fuel with the wrong octane number, over time, the device may simply fail. Trimmers are available with two-stroke and four-stroke engines. Their refueling and maintenance are significantly different.

Helpful hints:

1. Sometimes it is better to pour a little oil than to regret it. If you give a little more oil than indicated in the instructions, then nothing terrible will happen. The formation of carbon deposits is possible in cases of a large amount of oil and if the indicated proportions are not observed;
2. It is better to store the finished mixture for a month and no more, because for some reason it will lose its qualities;
3. Correct shutdown. It is imperative to use or drain the contents of the tank, so you can extend the work of rubber and plastic seals;
4. You should not use oil intended for mopeds for your chainsaw, because it is designed for low revs.

The correct operation of your technique is entirely up to you. First, do not disdain the manufacturers’ pointers or, in extreme cases, the instructions on the oil packaging. This will help avoid unpleasant situations. The neighbor does not always know how best to do it. The cheapness of oil and gasoline is not an indicator of high quality, because a breakdown of a tool can be much more expensive (about 80% of the cost of a chainsaw) than the money saved on the fuel mixture.

Fuel mixture

To properly prepare fuel, you need a list of additional tools:

1. A plastic or metal container for diluting the substance;
2. Measuring bottle for gasoline;
3. Dispenser;
4. Syringe;
5. A watering can for filling the tank of a chainsaw.

Some manufacturers, such as Stihl, immediately make measuring containers for more convenient measurement of the fuel mixture.

Different manufacturers produce oils in different shades. Hp produces a red liquid. Green oil is a premium synthetic segment. For your Husqvarna chainsaw, you need to use the correct brand of oil. It is of high cost, good quality, and is green or blue.

To mix the components, you will need the aforementioned additional accessories. Also on sale you can find special canisters with two holes for oil and gasoline. Everything is very simple here, pour in the ingredients, tighten the lid tightly and mix by tilting the container. Glass and plastic bottles can be used.

The fuel mixture must be free of water or dust.

Making the mixture: important proportions

When using a two-stroke engine, clean fuel is purchased separately and mixed with oil, often in proportions of 1:50. It is structurally impossible to install an oil pump in such an engine, therefore, pouring pure gasoline into the chainsaw is strictly prohibited! The manufacturer indicates the proportions, quantity and some brands in the instructions for use.

Important points in the cooking process:

• Domestic chainsaws work with oil M8-B, M-12TPU, M8-B, TP, MGD-14M. In some cases, you can use foreign options;
• Proportions: 2.5 liters of FI-80 gasoline per 100 grams of oil;
• Foreign models are distinguished by minimal fuel consumption. They work on foreign oils, and their proportions are 1:40 or 1:50.

Trimmer Husqvarna 128R

The popularity of the Husqvarna 128 R petrol trimmer is due to its superior quality, reliability, ease of use and, of course, reasonable price. It is a great tool for gardening. With its help, you can take care of local parks and courtyards.

One of the main strengths of the Husqvarna 128 R lawnmower is its powerful engine. It allows you to cut the grass as quickly as possible in a fairly serious area. At the same time, the lawn mower practically does not vibrate, as the manufacturer used a modern highly efficient shock absorption system. The operating noise of this model is minimal.

All Husqvarna petrol trimmers (including the Husqvarna 128 C) are equipped with Smart Start, which makes starting the engine easy, smooth and fast. One of the main advantages of the 128 R over others is the flexible shaft.

Those. Specifications
Husqvarna 128R

Power: 0.8 kW

Engine displacement: 28 cc

Fuel tank capacity: 0.4 l

Length without cutting head: 1695 mm

Cutting tool: fishing line / knife

Lawn mower Alpina B 28 D

2-stroke engine
Engine displacement, cubic cm 25.4
Power, h.P. 0.95
Weight, kg 6.6