Which Gasoline Should Be Poured Into a Husqvarna Trimmer

What kind of gasoline can I use in a Stihl chainsaw?

The operation of any chainsaw, a wide selection of which is presented at zakazik.Ua/products/benzopila.html, is provided by a 2-stroke engine, the design of which does not require an oil pump. That is why only a mixture of gasoline and oil is poured into them. In its pure form, the use of gasoline is strictly prohibited.

Proportions of the mixture for refueling Stihl chainsaws

Specific proportions should be indicated by the manufacturer in the operating instructions. Quite often, it is written in them that it is necessary to fill in gasoline of the AI-95 brand. But the octane number in domestic fuel in most cases is reached by various additives, which significantly reduces its quality. Therefore, it is recommended to use AI-92 brand gasoline to refuel modern Stihl chainsaws.

Oils are selected specialized for a 2-stroke engine, corresponding to the power class of a chainsaw. The best option would be a mixture of the same brand Stihl. They have red (mineral) and green (synthetic) colors.

A fuel mixture of gasoline and oil is prepared in strict compliance with the manufacturer’s recommendations. For Stihl chainsaws, the proportions are usually 1:50, that is, 20 grams of oil must be added to 1 liter of AI-92 gasoline.

You can measure the amount of oil by any means. A syringe or some measuring utensils. But the most convenient to use are dispenser bottles in which Stihl oils are available.

Important Tips

In order for the Stihl chainsaw to work productively for many years, you must adhere to the following recommendations:

  • Gasoline should be fresh, not from a canister a month ago.
  • It is forbidden to use oils for 4-stroke engines. It will not completely burn out, which will lead to the formation of soot and the early failure of the cylinder-piston group (CPG).
  • In a 2-stroke engine, oil should burn without residues, therefore it is more advisable to use “synthetics”, which is characterized by the formation of a smaller amount of combustion residues and smoke.
  • When diluting the mixture, it is better to add more than the recommended amount of oil, but within a reasonable range. 5 grams of excess per 1 liter of gasoline will not lead to coking. Larger amounts can cause carbon deposits and damage to the CPG. If you pour 5 grams less than indicated, this is fraught with overheating of the piston and cylinder.

Which gasoline is best for a chainsaw and why: expert advice

Everywhere and everywhere they write and discuss issues related to the choice of oil for a chainsaw, someone recommends only the original, but for someone “everything is fine” and on ordinary Lukoil 2T! They also raise a lot of questions about mixing gasoline with oil. The process of preparing the fuel mixture for a chainsaw has any more or less human resource. But no one ever raises the importance of using gasoline in a chainsaw! Why? Indeed, all technicians and engineers know how the use of high-octane gasoline affects engines designed to work on low-octane! A chainsaw is no exception!

How much gasoline is stored

During long-term storage, gasoline evaporates (regardless of brand), sediment precipitates at the bottom, it loses its properties, in other words, it deteriorates. It is worth knowing that it’s not so much the gasoline itself that ignites as its vapor. Therefore, if in the garage there is a canister with gasoline from last year, then think about whether it is worth it? Better leave it to light a bonfire for a barbecue.

Which Gasoline Should Be Poured Into a Husqvarna Trimmer

The use of “stale” gasoline for a chainsaw entails many problems:

  • Difficult start;
  • Decrease in maximum power;
  • Increased wear of engine parts of a chainsaw.

It is worth remembering that the prepared fuel mixture (gasoline with oil) is stored for no more than a month, after which time it should be disposed of. Using the old mixture increases the wear of the engine parts of the chainsaw. Do not forget about it!

Octane number

This is where the fun begins. Is it possible to refuel a chainsaw 95 with gasoline? In all chainsaw operating instructions, manufacturers indicate in bold: “Do not use gasoline with an octane rating higher than 92 to prepare the fuel mixture”. It is understandable, but not visible to everyone, because from time to time, chainsaws with a burned-out cylinder are brought to service centers!

Let’s figure out which gasoline to put into a chainsaw, and which not! For all two-stroke engines, saws need to use 92 gasoline, the tool is designed for it. Pouring 95 gasoline into the engine, detonation will begin to occur (pushing the piston into the counter-travel), something like a micro blow that will occur at almost every crankshaft revolution. About 98 gasoline, I think everything is clear, the effect will be even stronger, and it will already be mini strokes.

Dirty gas

Some owners of chainsaws are sure that if the tool works in constant dust (there is even an air compensator in the carburetor in case of a clogged air filter), it means that gasoline with pieces of rust can be swallowed and mining with small pieces of metal will go to the chain lubrication, right?

This is another common misconception never use gasoline from the bottom of the canister (all the more rusty). The chainsaw has a carburetor in which there are small channels that can clog from these small particles, which in turn will lead to breakage of the chainsaw and contacting a specialized workshop.

To summarize

In order for the chainsaw to serve for many years, never pour old gasoline into it, and you do not need to use brand 95 and especially 98 gasoline to prepare the fuel mixture, only 92. Also, do not forget about the purity of gasoline. No clothes!

I hope now you are not wondering which gasoline is suitable for a chainsaw and which is not very good.

Which Gasoline To Pour Into A Stihl 180 Chainsaw

Which gasoline is needed flood to the chainsaw

Hello! Glad to see you again, dear readers and subscribers of the Andrew Noack Blog. Who has anyone at home chainsaw, he already knows exactly what gasoline and how to fill it. Alas, to the one who only wants to acquire such an aggregate for himself, the article will seem amusing.

A chainsaw is one of the most comfortable and versatile household units. Before use, it is necessary to prepare the fuel mixture. However, in order for the unit to work correctly, it is necessary for our client to follow the manufacturer’s advice. Any model is personal, so which petrol to fill in a chainsaw?

Under the brand

For modern brands, for example, Husqvarna, Partner, Makita, Echo, Stihl AI-92 gasoline will do. Now just a huge number of people complain about the early breakdown of chainsaws due to disgusting gasoline. Because some specialists advise flood in such AI-95 chainsaws. In addition, a good AI-95 can “burn the piston”, and in addition, a number of people found a compromise and connect the AI-95 to the AI-92. Then it all depends on the properties of gasoline and ultimately decide for you.

For Russian instruments, Ural, Friendship is recommended to take petrol AI-80. It is important that the fuel consumption is the smallest.

Making the mixture: important proportions

Using a two-stroke engine, spotless fuel is purchased separately and mixed with oil, often in 1:50 proportions. It is structurally unrealistic to install an oil pump in such an engine, therefore pouring unsullied gas into a chainsaw is strictly prohibited! The manufacturer shows the proportions, quantity and certain brands in the operating instructions.

What type of gasoline to pour in a stihl 180 chainsaw.

Principal moments during the manufacturing:

  • Russian chainsaws work with oil M8-V, M-12TPU, M8-V, TP, MGD-14M. Sometimes apply foreign options;
  • Proportions: 3.5.5 L of FI-80 gasoline per 100 g of oil;
  • Foreign models are characterized by the lowest fuel consumption. They work on foreign oils, and their proportions become 1:40 or 1:50.

Fuel mixture

You may also like

    Lawn mowing: is it necessary to gas or work evenly? Creator: Leonid Kotvitsky Posted: Jun 17 2017 Viewed: 177,250I liked it: 908I didn’t like it: 142Also: how to set up work on a fixed throttle stick youtube tags: # lawn mowing #.

    Can I mow a wet grass cleaner While living in a private home, it’s easy to keep track of a systematic lawn care schedule. Even in wet weather, wet grass can be mowed with a lawn mower or trimmer a day after it dries. Th.

    What oils for trimmers need to be used? Today there are few people who use a conventional scythe in their garden. This “grandfather” method is practically not found. Yes, and many have no idea how to deal with her.

    Why does the chainsaw stall when I press on the gas: prerequisites and solution There are often cases when owners of chainsaws encounter their breakdown and it’s completely unprincipled which model of this kind of technology is, because the nature of breakdowns is practically the same for everyone.

    What to do when petrol trimmers do not start? Petrol trimmer is a surprisingly necessary tool with which you can cut out not only a small clearing in front of the house, but also a large lawn. Unfortunately, in this world there is nothing.

    The chainsaw starts up and stalls. Owners of chainsaws from time to time have to face the fact that the saw, for no apparent reason, stops working normally. To understand why the chainsaw stalls under different operating modes, also.

    To correctly prepare the fuel, a list of additional tools is useful:

    Some Russian automobile industries, such as Stihl, immediately make measuring tanks for a more comfortable measurement of fuel consistency.

    Various Russian automobile industries produce oils of various colors. Manufacturer HP produces a reddish liquid. Greenish tinted oil is a premium synthetic sector. For the Husqvarna chainsaw, it is necessary to take the oil of the corresponding brand. It has the highest price, good quality and has a greenish or blue color.

    Gas station of the Stihl MS180 Chiansaw, petrol and butter.

    Chainsaw Stihl MS180 A couple of points what really, what kind of water do you need flood in chainsaw. Always keep an eye out.

    The main thing is to correctly calculate the proportions of the mixture. Excess oil can form soot on pistons and candles. Excess gasoline can cause engine failure or scoring on the pistons. Each manufacturer gives its proportions to models of different capacities.

    To mix the components, you will need the above accessories. Also on sale you can find special canisters with two holes for oil and gasoline. Everything is very simple here, pour in the ingredients, tighten the lid tightly and mix by tilting the container. You can use glass and plastic bottles.

    Water or dust should not enter the fuel mixture.

    Good to know

    Fuel must be prepared for 3 gas stations. After all, storing a large amount of fuel can adversely affect the operation of the chainsaw. A mixture can behave differently, because many factors will influence it. As a result, your household appliance can be seriously damaged, which will entail financial costs.

    You may also like

      Adjustment of the carburetor for lawn mowers can be done with your own hands; lawn mowers, like all gasoline powered tools for the garden, are not difficult to maintain. It is possible and necessary to repair, configure without the help of others. For example, adjusting a carb carb.

      Changing the oil in a lawn mower with a four-stroke engine. Author: OKO master Published: April 25, 2016 Views: 43,167Like it: 342Like it: 22about changing the oil in a lawn mower with a four-stroke engine. Youtube tags:.

      Tiller Neva 6.5 hp Motoblocks Neva. One of the most famous devices of this category in the Russian market. They are designed to work in small areas. Together with additional equipment, this technique is used to perform various tasks.

      With the advent of summer, many owners of household plots are concerned about the issue, knitted then, how to put the knife on the trimmer. Relevant are the questions of why and when purposefully replacing the line on the lawn mow with a stronger cutting element. In…

      Tips for repairing a Stihl MS 660 chainsaw I got a Stihl MS 660 chainsaw, a number of questions have ripened: Is it necessary to disassemble the saw after work (it costs not working a week, from weekends to weekends) or is it enough to shake off the sawdust with a big brush,…

      Alvin Straight Alvin Boone bluntly (October 17, 1920. November 9, 1996) was an American man who became known for traveling 240 miles on a lawn swing from Lawrence, Iowa to the Blue River, Wisconsin, to visit his sick brother.

      Sometimes even capacity can affect fluid quality. Plastic and glass react with gasoline, which can create a risk of sudden ignition.

      It is important to remember that in the event of a chainsaw breakdown due to a poor-quality or incorrect mixture, the unit will not be able to repair the warranty.

      The finished liquid can not be stored for more than a month, because the oxidation process takes place. After working with the chainsaw, you need to use up the remaining fuel, turn off the engine and remove the remaining fuel mixture.

      Fuel consumption

      One of the most important questions that arises for the owners of the saw tool, because everyone wants to know what to count on.

      The volume of almost all tanks is approximately 500 ml. If the power of the chainsaw is 2 kW, then the flow fuel mixture will be approximately 1.2 liters per hour of work. Simply put, such a tool can work at maximum speed for half an hour without a break. If chainsaw not so powerful, then its tank volume will be smaller. So the user can independently control fuel consumption.

      Over time, the user will learn how to service his tool without any help. The main task will be to maintain the economic unit in good, working condition, using high-quality fuel mixtures. Observe safety rules when preparing flammable liquids. This will help to preserve the tool, and also not harm yourself and the environment.

      Helpful hints:

      1. Sometimes it’s better to pour a little oil than sorry. If you give a little more oil than indicated in the instructions, then nothing bad will happen. The formation of carbon deposits is possible in cases of large quantities of oil and if the specified proportions are not observed;
      2. It is better to store the finished mixture for a month and not more, because for some reason it will lose its quality;
      3. Proper shutdown. Be sure to use or drain the contents of the tank, so you can extend the work of rubber and plastic seals;
      4. Do not use oil designed for mopeds for chainsaws, because it is designed for low revs.

      The correct operation of your equipment is entirely up to you. First, do not disdain the manufacturers’ signs or, as a last resort, the directions on the oil packaging. This will help to avoid unpleasant situations. Not always a neighbor knows what is best for doing. The cheapness of oil and gasoline is not an indicator of high quality, because breaking a tool can be much more expensive (about 80% of the cost of a chainsaw) than the money saved on a fuel mixture.

      Topic

      Andrey Noak was with you, until we meet again on the blog!

      You may also like

      Which Gasoline To Stihl AURAMM.Ru Chainsaw

      How to correctly refuel a chainsaw

      • Fuel Consistency Preparation
      • Chainsaw refueling sequence
      • Features refueling chainsaws

      Incorrect operation of any instrument not only significantly shortens its service life, but also makes it potentially traumatic. In particular, this applies to devices with initially the highest risk of injury, which includes a chainsaw.

      Chainsaw device diagram.

      Tool operation always begins with its preparation for work. How can I pour gasoline into a Stihl chainsaw? What to pour gasoline into a chainsaw what to fill. In the case of a chainsaw, it is first to refuel it. What kind of gasoline should i put in a stihl chainsaw? Although refueling a chainsaw by itself is not an overly complicated operation, its incorrect or inaccurate execution can become a prerequisite for a severe threat of tool breakage and personal injury.

      Fuel mixture preparation

      Virtually all the engines of the chainsaws currently available are push-pull. In practice, this means that for their normal and non-hazardous operation, not pure gasoline is needed, but a fuel mixture of gasoline with the addition of engine oil in a certain proportion. This is a feature of all two-stroke engines: they are lubricated during operation by oil entering the cylinders simultaneously with the supply of gasoline.

      The optimal ratio of engine oil and gasoline in a mixture for a chainsaw is considered to be 1:50.

      Typically, the octane rating of gasoline and the recommended brand of oil, which is preferable for optimal engine operation, are indicated by the manufacturer of the chainsaw in the instruction manual attached to it. Pour in not clean gasoline, but in mixture with which gasoline to pour into the chainsaw.) C. How can I pour gasoline into a Stihl chainsaw? What to fill in a 2-stroke engine oil. The same manual also indicates the optimal ratio of engine oil and gasoline, and this ratio is not static and depending on the type of oil varies in the range from 1:25 to 1: 100. What kind of gasoline is needed, so which gasoline should be poured into a chainsaw? Husqvarna, Partner. But in the vast majority of cases, the ratio of 1:50 is used, and quite often this ratio is used when there is no instruction manual (for example, when buying a used chainsaw).

      But such actions still cannot be considered completely justified. How to pour gasoline into a Stihl chainsaw? What to fill in the oil volume, but in. The engine of a modern chainsaw can operate at a maximum speed of 13.5 thousand per minute, which leaves no room for experiments with its lubrication. Which Stihl chainsaw should I use with 92 or 95 petrol? What kind of gasoline to pour into a chainsaw, they are not designed for chainsaws, why do we need manual. The only thing that is justified is to allow when preparing the fuel mixture for a used chainsaw, in which the engine is already very worn out, to increase the initially recommended amount of motor oil added to gasoline by 5-6%.

      Read also

        The correct proportion of oil and gasoline for a chainsaw The proportion of oil and gasoline for a chainsaw is very important for the durability and reliability of the device. The required proportions directly depend on the type of saw and the mode of operation. It is necessary to find the type of chainsaw.

        How to dilute gasoline with oil for a chainsawHow to dilute gasoline for a chainsaw? As gasoline for a chainsaw, gasoline with the highest octane rating is used: AI-92 or AI-95. To dilute gasoline for a chainsaw 1 liter of gasoline, add 30 g of special.

        The proportions of oil and gasoline for chainsaws, the choice of oil, abstract The observance of the correct proportions of oil and gasoline for chainsaws makes it possible to avoid the vast majority of troubles arising from this inventory. With all this, select the lubricating.

        The proportions of oil and gasoline for chainsaws, the choice of oil, abstract The observance of the correct proportions of oil and gasoline for chainsaws makes it possible to avoid the vast majority of troubles arising from this inventory. Here, pick up lubricants.

        What gasoline needs to be poured into a chainsaw Glad to see you again, dear readers and subscribers of the Andrew Noack Blog. Everyone who has a chainsaw at home, he already knows exactly what gasoline and how to fill it. But the one who only wants to acquire.

        Experiment: how long a Chinese chainsaw 4500 on clean gasoline will last / chainsaw on clean gasoline Even such a fairly economical chainsaw was able to be destroyed not immediately, but slightly by sweating. In what proportion mix new gasoline with oil.

        For the sentence of the fuel mixture, it is advisable to use a special container with tags on the body.

        Ratios indicate the number of parts of gasoline per 1 part of oil. If you translate the ratio of 1:50 into a more familiar system of measures, then this means that 1 liter of gasoline needs 20 ml of oil. What kind of gasoline should i put in a stihl chainsaw? Clean gas, do not try to pour.) C. The fuel mixture is prepared in compliance with the specified proportions in a certain sequence.

        First, oil is completely poured into the iron tank, then half of the required volume of gasoline is added to it. Which gasoline to pour into which gasoline to fill in the chainsaw is Husqvarna oil. It is not recommended to use plastic cans or plastic bottles for this, since their material can react with gasoline, quickly oxidizing. Stihl chainsaw which gasoline is the Stihl chainsaw which gasoline is what they write in. Then the poured oil and gasoline are thoroughly mixed until a uniform color of the mixture is obtained, only after that the second half of gasoline is added, bringing its amount to the required volume.

        Stihl which gasoline to use 92 or 95?

        Chainsaw Stihl MS180 A couple of points about which fluids to fill in chainsaw. Always keep an eye out.

        Refueling Stihl MS180 Chainsaws, gasoline and oil.

        Chainsaw Stihl MS180 oil dispenser. Please advise what brand of gasoline you need to fill in an alpine chainsaw (Stihl 180). What gasoline to fill in a chainsaw of a popular brand. A chainsaw is a convenient unit that can solve a lot of everyday problems. We make a mixture. Life hack Often have to make a mixture for chainsaws and hank.

        Ideally, to extend the service life, the oil specified in the manual should be used to prepare the fuel mixture, especially since many manufacturers of chainsaws simultaneously produce their own oils developed and adapted specifically for these tools under their own brand.

        Chainsaw refueling sequence

        In order to avoid any unpleasant incidents during start-up and later during operation of the refueling chainsaw, it is necessary to strictly observe the rules and sequence of refueling:

        When refueling the chainsaw, the throat is directed upwards and wiped dry, and the fuel is poured into the funnel, all the covers are carefully clogged.

        • Refueling requires a clean and even surface;
        • Do not refuel near fire sources;
        • The necks of the fuel and oil tanks should be facing up during refueling;
        • Before refueling the neck of the tanks, wipe with a clean, dry rag;
        • The fuel tank cap must be removed with extreme care to prevent spills of fuel residues;
        • Fuel in the tank must be filled slowly and accurately, it is better to fill with a funnel;
        • Oil in the oil tank must also be filled with extreme caution;
        • The cap of the refilled tank must be screwed up to the stop and fixed with a latch to prevent its spontaneous unscrewing;
        • Refueling tanks must be absolutely airtight; it is strictly forbidden to run a refueling saw if there is the slightest leak;
        • You can not start the chainsaw at the very place where it was refueled: you need to move at least 2 m;
        • Do not smoke or use open flames while refueling.

        Remember that compliance with these simple, but very important rules is the key to your safety during refueling and later on when working with a chainsaw.

        Features refueling chainsaws

        You can’t use gasoline lower than A-92 for refueling imported chainsaws, and A-76 is suitable for domestic products. Immediately before pouring the mixture into the tank, it must be shaken again directly in the container until a uniform color is obtained.

        Chainsaw needs to be refilled carefully, without spilling mixture past the fuel tank.

        Read also

          The correct proportion of oil and gasoline for a chainsaw The proportion of oil and gasoline for a chainsaw is very important for the durability and reliability of the device. The required proportions directly depend on the type of saw and the mode of operation. It is necessary to find the type of chainsaw.

          How to dilute gasoline with oil for a chainsawHow to dilute gasoline for a chainsaw? As gasoline for a chainsaw, gasoline with the highest octane rating is used: AI-92 or AI-95. To dilute gasoline for a chainsaw 1 liter of gasoline, add 30 g of special.

          The proportions of oil and gasoline for chainsaws, the choice of oil, abstract The observance of the correct proportions of oil and gasoline for chainsaws makes it possible to avoid the vast majority of troubles arising from this inventory. With all this, select the lubricating.

          The proportions of oil and gasoline for chainsaws, the choice of oil, abstract The observance of the correct proportions of oil and gasoline for chainsaws makes it possible to avoid the vast majority of troubles arising from this inventory. Here, pick up lubricants.

          What gasoline needs to be poured into a chainsaw Glad to see you again, dear readers and subscribers of the Andrew Noack Blog. Everyone who has a chainsaw at home, he already knows exactly what gasoline and how to fill it. But the one who only wants to acquire.

          Experiment: how long a Chinese chainsaw 4500 on clean gasoline will last / chainsaw on clean gasoline Even such a fairly economical chainsaw was able to be destroyed not immediately, but slightly by sweating. In what proportion mix new gasoline with oil.

          For the same reason, do not fill the tank completely, you need to leave at least a finger of free space in it.

          To control the level of the fuel mixture in the tank, it is released with transparent walls.

          Chainsaw fuel system: 1. Fuel filter, 2. Carburetor, 3. Manual pre-pump.

          The fuel tank capacity of a 2 kW chainsaw (which corresponds to 2.7 hp) is slightly more than 0.5 liters. With constant operation with maximum load, the average fuel consumption is 1.2 l / h. It is easy to calculate that one refueling is enough for about half an hour of intensive work. How can I pour gasoline into a Stihl chainsaw? What kind of gasoline to pour in for a chainsaw. How can I pour gasoline into a Stihl chainsaw? How to pour gasoline into a Stihl chainsaw? Flood. For less powerful chainsaws, in which the tank volume is less, and the operating time at one gas station is reduced.

          In addition to refueling the fuel tank, the design of the chainsaws provides another tank, which also needs to be refilled at the same time as refueling. Gasoline to prepare the fuel mixture in a chainsaw which to pour? In gasoline. To dilute gasoline into a chainsaw, what brand of gasoline to pour? In the stihl saw. This tank is designed for special chain lubrication oil. It’s easy to distinguish between them. The fuel tank’s logo is usually shown on the lid of the fuel tank, and a stylized image of a drop of oil on the oil’s cover.

          Manufacturers of chainsaws for chain lubrication produce branded oil containing special additives that help keep it on the chain. But it is quite expensive, so the owners of chainsaws in order to save often replace it with gear or motor oils.

          Such a replacement is not welcomed by manufacturers of chainsaws, but does not have a noticeable negative effect on the operation of the tool, except for a slightly higher replacement consumption compared to the original oil.

          The flow rate of these two tanks is adjusted so that the oil production in the oil tank is slightly behind the production of the fuel mixture. What kind of gasoline to pour in a chainsaw and others. How to pour gasoline into a Stihl chainsaw? In other words, when the fuel tank is completely empty with a properly adjusted carburetor responsible for fuel consumption, a little oil should remain in the oil tank. Stihl chainsaw which gasoline to pour? On a Stihl chainsaw, which gasoline is ideal. If the fuel mixture is produced much faster than the oil for chain lubrication, then this is a clear signal to check the operation of the engine, primarily the carburetor.

          A chainsaw has long been one of the most sought after tools. But such popularity cannot make it less traumatic. Learning to prepare a fuel mixture for Stihl chainsaws, what kind of gasoline to pour into a chainsaw? Therefore, in its operation, care and adjustment can not be trifles. Knowing how to properly handle a chainsaw, and applying this knowledge in practice, you will protect yourself from serious injuries and injuries.

          You may also like

          What gasoline to fill in a chainsaw

          Hello! Glad to see you again, dear readers and subscribers of Andrew Noack’s Blog. Everyone who has a chainsaw at home, he already knows exactly what gasoline and how to fill it. But to someone who just wants to buy such an aggregate, the article will seem entertaining.

          A chainsaw is one of the most convenient and versatile household units. Before use, you need to prepare the fuel mixture. But for the unit to work correctly, you must follow all the manufacturer’s recommendations. Each model is individual, so which gasoline should I put in a chainsaw?

          Under the brand

          For modern brands, for example, Husqvarna, Partner, Makita, Echo, Stihl, AI-92 gasoline is suitable. Today, just a huge number of people complain about the premature failure of chainsaws due to poor gasoline. Therefore, some experts recommend pouring AI-95 into such chainsaws. At the same time, a good AI-95 can “burn the piston”, and again some people find a compromise and mix AI-95 with AI-92. In general, it all depends on the quality of gasoline and ultimately you decide.

          For domestic tools, the Urals, Friendship, it is recommended to take AI-80 gasoline. It is very important that fuel consumption is minimal.

          Making the mixture: important proportions

          When using a two-stroke engine, clean fuel is purchased separately and mixed with oil, often in proportions of 1:50. It is structurally impossible to install an oil pump in such an engine, so it is strictly forbidden to pour clean gasoline into a chainsaw! The proportions, quantity and some brands of the manufacturer are indicated in the instruction manual.

          Important points in the cooking process:

          • Domestic chainsaws work with oil M8-V, M-12TPU, M8-V, TP, MGD-14M. In some cases, you can use foreign options;
          • Proportions: 2.5 l of FI-80 gasoline per 100 grams of oil;
          • Foreign models are characterized by minimal fuel consumption. They work on foreign oils, and their proportions become 1:40 or 1:50.

          Fuel mixture

          To properly prepare the fuel, you will need a list of additional tools:

          1. A plastic or metal container for diluting a substance;
          2. Measured bottle for gasoline;
          3. Dispenser;
          4. Syringe;
          5. Watering can for pouring a chainsaw into the tank.

          Some manufacturers, such as Stihl, immediately make measuring tanks for more convenient measurement of the fuel mixture.

          Different manufacturers produce oils of different colors. Manufacturer HP produces a red liquid. Green shade oil is a premium segment of “synthetics”. For Husqvarna chainsaw you need to take the oil of the appropriate brand. It has a high cost, good quality and has a green or blue color.

          The main thing is to correctly calculate the proportions of the mixture. Excess oil can form soot on pistons and candles. Excess gasoline can cause engine failure or scoring on the pistons. Each manufacturer gives its proportions to models of different capacities.

          To mix the components, you will need the above accessories. Also on sale you can find special canisters with two holes for oil and gasoline. Everything is very simple here, pour in the ingredients, tighten the lid tightly and mix by tilting the container. You can use glass and plastic bottles.

          Water or dust should not enter the fuel mixture.

          Good to know

          Fuel must be prepared for 3 gas stations. After all, storing a large amount of fuel can adversely affect the operation of the chainsaw. A mixture can behave differently, because many factors will influence it. As a result, your household appliance can be seriously damaged, which will entail financial costs.

          Sometimes even capacity can affect fluid quality. Plastic and glass react with gasoline, which can create a risk of sudden ignition.

          It is important to remember that in the event of a chainsaw breakdown due to a poor-quality or incorrect mixture, the unit will not be able to repair the warranty.

          The finished liquid can not be stored for more than a month, because the oxidation process takes place. After working with the chainsaw, you need to use up the remaining fuel, turn off the engine and remove the remaining fuel mixture.

          Fuel consumption

          One of the most important questions that arises for the owners of the saw tool, because everyone wants to know what to count on.

          The volume of almost all tanks is approximately 500 ml. If the power of the chainsaw is 2 kW, then the consumption of the fuel mixture will be approximately 1.2 liters per hour of operation. Simply put, such a tool can work at maximum speed for half an hour without a break. If the chainsaw is not so powerful, then its tank volume will be smaller. So the user can independently control fuel consumption.

          Over time, the user will learn how to service his tool without any help. The main task will be to maintain the economic unit in good, working condition, using high-quality fuel mixtures. Observe safety rules when preparing flammable liquids. This will help to preserve the tool, and also not harm yourself and the environment.

          Helpful hints:

          1. Sometimes it’s better to pour a little oil than sorry. If you give a little more oil than indicated in the instructions, then nothing bad will happen. The formation of carbon deposits is possible in cases of large quantities of oil and if the specified proportions are not observed;
          2. It is better to store the finished mixture for a month and not more, because for some reason it will lose its quality;
          3. Proper shutdown. Be sure to use or drain the contents of the tank, so you can extend the work of rubber and plastic seals;
          4. Do not use oil designed for mopeds for chainsaws, because it is designed for low revs.

          The correct operation of your equipment is entirely up to you. First, do not disdain the manufacturers’ signs or, as a last resort, the directions on the oil packaging. This will help to avoid unpleasant situations. Not always a neighbor knows what is best for doing. The cheapness of oil and gasoline is not an indicator of high quality, because breaking a tool can be much more expensive (about 80% of the cost of a chainsaw) than the money saved on a fuel mixture.

          Topic

          92 or 95th, how much and what kind of oil should be added to the fuel and how to dilute the mixture correctly

          A chainsaw is simple to set up and is needed in a private household. The device cannot fully work if you do not use the correct fuel mixture, which should be able to cook.

          Chainsaw device

          Each chainsaw has different technical data and can perform a different job.

          Powerful saws are suitable for felling centuries-old trees, small chainsaws are more suitable for performing various work in a private household:

          Kuznetsov Vasily Stepanovich

          The design of the chainsaw is simple, there is not even a gearbox, a two-stroke power plant is functioning, it has one gas cylinder.

          Standard chainsaw blocks:

          1. Power point.
          2. Clutch
          3. Ignition unit
          4. Carburetor.
          5. Fuel block (tank for oil and fuel).
          6. Filters for cleaning incoming air.
          7. Starter.
          8. Chain.
          9. The tire.
          10. Chain brake
          11. The mechanism of tension.
          12. Chain lubrication element.

          For each chainsaw, high-quality fuels and lubricants are required, namely they provide long-term productive functioning of the unit. What kind of gasoline for chainsaw to fill in, in what proportions?

          Simple oils are suitable for domestic chainsaws, foreign chainsaws need more complex fuel mixtures that have undergone thorough cleaning.

          Chainsaw owners are primarily interested in fuel consumption. The volume of the fuel tank is usually 550 ml. Let’s say the device’s power is only two kilowatts. In one hour of operation, such a unit will consume 1.25 liters. If the tool operates in afterburner mode, then the fuel may last for 20-30 minutes of continuous operation.

          Fuel selection

          How to choose fuel for a chainsaw. This is not an unimportant issue, the success of the unit’s operation directly depends on it. According to existing canons, good gasoline for a chainsaw is not considered leaded, but high-octane from a trusted manufacturer. The cleaner the fuel, the better. If gasoline was stored in the canister for a year and a half, then this will adversely affect the nature of the device, so the substance should be prepared just before the start of work.

          It is recommended not to use low-octane fuel, to completely exclude inexpensive oils from the circle of attention of dubious quality. It is not necessary to use leaded fuel, it significantly reduces the resource of the power plant.

          It is important to ensure that there is no alcohol in the fuel, any additives that may interfere with the operation of the power plant. Experts are still debating what is better than 95 or 92. The first has more stable detonation indicators, but most often they use the 92nd. The reason is simple: questions often arise by the 95th, it has a large number of various additives that adversely affect the operation of the saw engine. Microdetonation occurs (piston momentum in the opposite direction), which takes place with almost every revolution of the crankshaft. If the octane number is even higher (98), then the micropulse will become even more intense.

          The consequences of improper gasoline on the quality of the unit can only be negative:

          • The mechanism will hardly start.
          • Power will be minimal.
          • Wear parts will occur more intensively.

          Kuznetsov Vasily Stepanovich

          Gasoline from the bottom of the canister should not be refueled with a chainsaw. The carburetor’s wired channels have small diameters; if they become clogged, this will cause a chainsaw to break. All fuel should be carefully filtered before use. For domestic saws “Ural”, “Friendship” the fuel grade “80” is suitable.

          How much oil do you need to add to gasoline?

          Types of oils used for dilution in gasoline

          Chainsaws do not have oil pumps, so a combustible mixture alone cannot be used. You should carefully read the instructions that are attached by the manufacturer to each product. A lot of information on the Internet, finding it is not difficult.

          If there is no grease, then the saw will fail after a short time. It is recommended to carry out preventive maintenance of the unit, to fill in properly diluted fuel, in which case the tool will function for many years.

          Carefully read the recommendations from the manufacturer (see “Instructions”), they always sign in detail: what composition is required for the power plant. It’s not worth saving on oil, the benefit is small, and the resource of the engine can be significantly reduced. Repairing a tool is expensive, up to 85% of its cost.

          If you take, for example, a Husqvarna chainsaw, then unleaded gasoline with the first additive of brand 92 is suitable. If the composition has a greenish tint, this indicates that the product is of the Premium class. Ai-92 is the optimal product that may be suitable for such a device. On average, professionals are advised to add twenty to 50 ml of engine oil per liter. If the power of the unit is one and a half kilowatts, then only 25-27 ml of oil will be required.

          Kuznetsov Vasily Stepanovich

          If the tool is more powerful, then about 30 ml of oil is required, and in some cases even more.

          How to dilute engine oil and gasoline, in what proportions? This question arises for all users. First you need to stock up on containers:

          • Volumetric liter bottle
          • Dispenser and syringe
          • Watering can, which will allow pouring substance into the tank

          The process of mixing oil and gasoline is technologically simple. It is important to observe safety precautions so that static electricity does not accumulate, and not a drop of water enters the fuel.

          Types of oils used for dilution in gasoline

          What proportions should be done? Engines are mostly two-stroke, so the mixture is usually 1:50. Russian-made chainsaws operate with products of the following brands:

          For foreign counterparts, it is permissible to use two liters of gasoline per 80 grams of oil. Foreign saws are characterized by economical fuel consumption, the proportions of oil in them vary from 40 to 49 parts.

          Oil shades can vary significantly, this should be considered during operation. For example, HP produces a reddish color engine oil. If the composition has a greenish (sometimes blue) tint, then this is a sure sign that the product is synthetic premium. The quality of such formulations is high, the cost is also rather big.

          instruction: How to properly dilute gasoline with chainsaw oil

          The main task: correctly calculate the proportions, if there is too much oil, then soot will appear on the piston. Excess gasoline provokes seizure on the piston. The performance characteristics of the models vary quite significantly, which is why it is important to read the “User Guide”.

          Mineral oils are inexpensive, so they are most often used. Synthetic oils must be filled in if there are significant temperature fluctuations, they do not generate carbon deposits and have additives useful for dynamic assemblies.

          The Husqvarna company’s product is considered the highest quality, and Lukoil machine oil is in second place.

          Advantages of these oils:

          • Low consumption.
          • Preservation of quality.
          • The ability to maintain technological qualities for a long time.

          • They can work in extreme conditions.
          • There are no toxins.
          • The minimum amount of soot.

          Many professional tools use grease made using API-TB technology (USA). Also popular are products that are manufactured according to the JASO-FB technique (Japan).

          It is forbidden to use the substance if the package has a designation that it is intended for four-stroke engines. If the manufacturer of the oil is unknown, then it is better not to use it.

          What gasoline are you using for chainsaw?

          It is acceptable to mix oils from different brand manufacturers with similar characteristics. Mineral and synthetic oils are incompatible. “Standard” is considered to be the best oil for household chainsaws, and “Ultra” technical fluid is best suited for professional equipment.

          Some oils can successfully replace each other. For example, substances produced by Husqvarna and Stihl. Grease for scooter engines or motor boats is not suitable for chainsaws, the oil quality in them is low. If the proportions of oil and gasoline are not maintained, then the tool will quickly fail due to the abundant formation of soot.

          Kuznetsov Vasily Stepanovich

          If the power of the instrument is up to 1,500 watts, then 100 grams of engine oil is added to 4 liters of fuel. If the power is greater, then a proportion of 1:50 is used, that is, five liters will require 100 ml of product. Manufacturers’ recommendations vary widely; it is recommended that you familiarize yourself with such information first.

          Advantages and disadvantages of oil

          Any high-quality engine oil has its pros and cons

          Any high-quality engine oil has its pros and cons. Some experts argue that any chainsaw oil is suitable. This is not entirely true, almost any substance can be used for the Hurstavna chainsaw, but only transmission oil is required for the Stihl chainsaw. When choosing, you need to know the color of the oil well, a two-stroke engine requires a composition that has a reddish, bluish or greenish tint.

          To prepare the mixture yourself, you need to use heat-resistant grease, which has a well-known brand.

          The density of the product is affected by seasonality:

          • Air temperature.
          • Humidity.
          • The intensity of solar radiation.
          • Pressure.

          What are the features of different oils, You can find out by carefully examining the label on the container. In the absence of instructions or labels on the packaging, the use of such a substance should be discarded. At the same time, the performance characteristics of the oil should not change dramatically with a difference in temperature conditions.

          The specificity of the lubricating substance lies in the fact that it is optimally suited for engines with high revs that have air cooling. It is these power plants that are equipped with chainsaws. Oils of mineral origin have a reddish tint, and “synthetics” has a greenish tint.

          Do not use any substitutes, often among them counterfeit products (up to 20%) are found. It is quite difficult to distinguish a fake, it is required to have specially equipment.

          It is recommended that fuel be stored in metal containers. It is best to prepare the fuel mixture in a can.

          There are a large number of oils and each has its own characteristics.

          Consistency is made in the ratio:

          Kuznetsov Vasily Stepanovich

          There are almost no chainsaws on the market, which operate on a mixture in the ratio of 25: 1. After pouring a new mixture, the tool should idle for some time.

          Ttx of a mineral or organic oil intended for the chain itself is not suitable for preparing a fuel mixture. The finished product is poured into the tank (up to half), then mixed (the container must be tightly closed). Thus, a homogeneous composition is obtained. It is better not to cook the fuel ahead of time, it quickly loses its functional properties. At room temperature, the flammable liquid deteriorates within two weeks.

          Tips

          Tips and life hacks are extremely useful in practical work, consider some of them:

          1. It is convenient to use canisters with dispensers, while experienced people filter gasoline through suede. The cleaner the fuel, the more efficient the carburetor will work.
          2. Gasoline is able to actively evaporate, especially at high temperatures; a suspension that cannot be poured into the engine falls out at the bottom of the canister.
          3. It is recommended to cook fuel for no more than three operational refueling.
          4. The quality of the fuel can be affected by the material of the tank; PVC materials are especially active in the reaction.
          5. If the fuel mixture is poured of poor quality, the chainsaw can be removed from the warranty.
          6. When working, you should test the tightness of the containers and the rhythmic operation of the engine.
          7. One of the first signs of a malfunction is unjustified heating of the circuit.
          8. Before exposing the tool to severe stress, it should be tested at idle.
          9. The tank is enough for half an hour at work.
          10. In the second tank, there is still grease (residues) when it is over in the tank.
          11. If a large amount of smoke occurs during operation, it means that the fuel is of poor quality.
          12. During operation of the unit, do not approach an open flame.
          13. (distance up to 2 meters).
          14. Pouring fuel should not be “under the rim”, leave a little space.

          review: Which gasoline to use 92 or 95?

          Gasoline for chainsaw: which to pour?

          Since a two-stroke engine is used on chainsaws, where it is structurally impossible to install an oil pump, you cannot pour pure gasoline into a chainsaw! A fuel mixture of gasoline and oil is poured into chainsaws. The proportions for different saws are set by the manufacturer, a specific number is indicated in the instruction manual.

          The question is often asked: gasoline for a chainsaw, which one to pour? I will try to answer in more detail.

          Gasoline for chainsaw

          For domestic chainsaws (Urals, Friendship, etc.), AI-80 grade gasoline is used. Oils can be used domestic, such as M8-B (or early marking AC-8.10), M-12 TP, M-12TPU, MGD-14M. It is also possible to use oils from foreign manufacturers. In any case, the proportions when mixing oil and gasoline should be 1/25, that is, one hundred grams per two and a half liters of gasoline.
          For modern chainsaws from foreign manufacturers, the proportions are usually equal to 1/40 (100 grams per 4 liters of AI-92), 1/50 (100 grams to 5 liters of AI-92). Gasoline use grade AI-92. Often you can see that the AI-95 brand will be indicated in the instructions. But with our quality of this gasoline, the octane of which is overtaken by additives, I would not recommend using 95th if you are not sure about its quality.

          On the proportions of the mixture:

          How TO DEPART GASOLINE FOR CHAINSAW? Choice OF OIL, PROPORTION

          To measure the required amount of oil, you can use a syringe, a measuring bottle, a special dispenser or, for example, a bottle with a dispenser from Stihl.
          Oils from different manufacturers in different colors. As you can see in the picture above, the calm oil of the HP brand (mineral water) is red, the more expensive are synthetic green. Husqvarna oil can be green or blue.

          Remember! In THE EVENT OF THE CHAINSAW EXIT FROM THE SYSTEM FOR THE CAUSE OF FILLING AN INCORRECT MIXTURE, THE REPAIR WILL BE NON-WARRANTY!

          [important] Tips:
          It’s better to pour oil than not! If 1/50 is written, then when you pour 25 grams per liter, you will not be afraid, since coking in this case is unlikely. But if you add 15 grams per liter, it is quite possible that this will not be enough.
          Do not store the finished fuel mixture for more than a month (preferably less), as it loses its octane rating (gasoline “fizzles out”).
          Before the season, develop the entire tank to the end or drain to avoid loss of gasoline quality and wear of rubber and plastic seals.
          In no case do not use oils for mopeds. They are designed for lower speeds [/ important]

          Chainsaw refueling

          Finally, a on the procedure for refueling a Stihl MS180 chainsaw with a fuel mixture using a company canister.

          READ  How To Use A Lawn Mower Gasoline Line