Which is better benzo or saw

The main difference between a chainsaw and a saw

The principles of operation are similar, mainly power supplies differ.

The chainsaw works by burning a fuel mixture.

saw from the mains.

If you plan to use the tools in the forest, in an open area or in a facility where electricity has not yet been supplied, there are no alternatives to a chainsaw. If a saw is needed for a summer residence, an electric model is also suitable.

Comparison of characteristics

Parameter name Description
Mobility According to this characteristic, the chainsaw is ahead of the electric one. Since it does not depend on electricity, you can take it with you to the forest, hunting or fishing. The main thing is to stock up on the fuel mixture. Even in domestic conditions, the saw is less mobile, because its cord can make it difficult to use. In addition, the electric model cannot be used during a power outage, as well as in wet weather.
Power If we compare household models, then electric and gasoline models are approximately the same in power. However, professional gasoline saws are more powerful than any electric saw. They can cut even frozen wood.
Duration of work Chainsaws last much longer. up to 8 hours. In the instructions for the saws, it is recommended not to exceed 20 minutes of use.
Working conditions The chainsaw can be used in almost any environment. Only frost can become a serious obstacle to work. Saws are more complicated: they cannot be used in the rain or in wet weather. But they are indispensable when working indoors, since they do not emit harmful exhaust gases, they emit a minimum of vibration and noise.
The cost It is cheaper to buy and maintain a saw than an electric one. Electric models are 2 times cheaper than petrol models of the same power. In addition, there is no need to purchase gasoline and engine oil for electric saws. Of course, you also have to pay for electricity, but it is always cheaper than gasoline. Electric saws also have fewer components and spare parts than gasoline saws.

What parameters should you pay attention to when choosing a chainsaw?

Power. For small jobs. cutting branches and small trees. a chainsaw with a power of 1.5 kW is suitable. For example, this CHAMPION 237 chainsaw. If you need to cut thicker logs, pay attention to saws with a capacity of 1.8 kW.

Engine volume. The more this indicator is, the more power the chainsaw has. However, you should not chase the volume, because with an increase in volume, the number of necessary consumables also increases.

Bus length. The longer the bar, the greater the saw potential. For everyday tasks, a tire of 30-35 cm is enough, for logging and construction needs. at least 40 cm.

The weight. The lightest devices weigh 5 kg. The most powerful ones are up to 8 kg. Take this into account when choosing a weight that is comfortable for yourself.

Noise level. Usually it reaches 110 dB, so it is better to purchase ear protectors.

Accessories. Most requested features. safety brake, extra long boom and exhaust gas purging system.

Features for choosing an electric saw

Power. The weakest saws are from 1.2 kW. For professional, you need at least 1.8 kW.

Bus length. Same as gasoline saws.

The weight. Electric saws are lighter than gasoline saws. The lightest models weigh 4 kg.

Noise level. Even the loudest models reach less than 100 dB. You can work without headphones.

Accessories. Most requested features. chain sharpener and start button lock.

But regardless of which saw you decide to buy, the models that we selected in Maxidom will become real “magic wands” for you!

Chainsaw or saw: which is better and how to choose?

which, better, benzo

The hand saw only performs minimal functions. That is why, when completing a set of tools for a rack or use in the country, the question arises: which is better, a chainsaw or a saw. Both tools have merit. Therefore, when selecting them, it is worth deciding which criteria are more important to you. We’ll talk about this below, but first, let’s find out how these types of tools differ.

Velvet bells will give you coziness: everything about gloxinia

Home Craftsman’s Arsenal: A Hand Tool That Must Be.

Choosing a coolant for the heating system of a country house

Chainsaw or Saw? What’s better?

Every professional builder should take the process of choosing a saw responsibly. The same rule applies to amateur craftsmen. But people are faced with an important question. Which is better: a chainsaw or a saw? Let’s try to understand this issue in more detail.

Chainsaw: tool features

This chain saw is in demand among people. It works thanks to the presence of an internal combustion engine in the structure, which is connected to a chain. A simple mechanism of a classic look has an increased level of reliability.

The chainsaw is presented on the modern market in several main types:

  • household tools. Chainsaws of this type are suitable for occasional use. The gasoline tool is lightweight and small in size. Most often, a chainsaw is used to prepare a small amount of wood for kindling the stove. The basic capabilities of a gasoline saw are limited, since it is recommended to use it no more than two hours a day;
  • professional chainsaw. this tool is suitable for felling trees. A chainsaw of this type is quite powerful and multifunctional. You can use it up to 16 hours a day without interruption.

Such a chain tool has the following advantages:

  • the chainsaw does not require connection to a power source;
  • such a chain saw is suitable for use in different conditions;
  • professional chainsaws are powerful enough, so they can compete with electric options;
  • a gasoline chain saw can work for a long time without interruption;
  • gasoline tools have a high level of reliability and long service life.

Among the disadvantages of such saws are the following points:

  • a gasoline tool during operation is harmful to human health, since it emits exhaust gases;
  • professional chainsaws make loud noises during operation;
  • a gasoline chain tool creates vibrations that make the work process more difficult;
  • gasoline saws will have to be filled with gasoline, which is fraught with additional waste.

It is also worth remembering that starting a gasoline engine in subzero temperatures is quite problematic.

Chainsaw or Saw? What’s better?

Features of saw operation

The modern saw combines the basic functions of a chainsaw with the advantages of electric tools. The chain rotates by means of a gearbox which is connected to the motor. Modern saws are supplemented with automatic-type saw head lubrication. The electric saw motor is protected from overheating by a special relay, which will allow you to work in intensive mode.

A professional saw has the most important parameter. the power level of the electric motor. It is on him that you need to pay attention to when choosing a saw. The higher the power level, the more productive the tool itself will be.

The main advantages of the saw, which directly affect the choice of people, are as follows:

  • the saw weighs a little, and its dimensions are very compact, which facilitates the process of performing work;
  • the saw does not emit gases harmful to human health and nature into the air;
  • it is very easy to use the saw;
  • the cost of the tool is affordable;
  • during operation, the electric motor emits a minimum of noise, so the saw will not cause your discomfort;
  • the saw is easy to start, which will allow you to avoid problems in the process of starting it;
  • modern saws, the choice of which is very wide, practically do not vibrate, so it will be much more convenient for you to use them.

But the saw is not without its weaknesses. The main points are the following:

  • saws need a power source for stable operation;
  • tools are afraid of precipitation and high levels of humidity;
  • you need to take breaks every 15 minutes so that the saw does not fail;
  • saw service life is low.

The final choice of a saw depends on the characteristics of the tasks assigned to you and on the frequency of use of the tool. It is necessary to carefully read all the above features of chainsaws and saws, so as not to make a mistake. Only in this case, you will quickly cope with any work without experiencing any particular difficulties.!

Petrol saws

The chainsaw has been well known to us for a long time. She saws well, is reliable and durable. Among other advantages, we note:

  • Autonomy of work. Take a can of gasoline and some oil with you and you can work anywhere.
  • Higher power and performance compared to saws (with similar dimensions). With the help of a chainsaw, you can work with materials of different thickness.
  • Large selection of models. You can find a chainsaw in every size, power, and configuration. Depending on the planned operating conditions (preparation of firewood for a bath, for example), you can choose the best saw for yourself without overpaying for unnecessary opportunities.

It is impossible not to note the weighty disadvantages of gasoline saws:

Benzos. What can be done? SDF and the Scottish Drug Deaths Taskforce Webinar

  • The presence of exhaust and, as a result, the inability to work indoors.
  • Significant level of noise and vibration during the operation of a gasoline engine.
  • High operating costs associated with the purchase of fuel and oil.
  • High requirements for fuel quality (or accelerated engine wear).

Gasoline or saw. what’s better?

Consider the second party to the dispute.

Electric saws

The main advantage of the electric motor is its operational low cost. Lack of fuel costs (in any case, as large as for gasoline models) makes the saw much more economical.

  • The saw with an electric motor is more convenient to use, as it has less weight, lower noise and vibration levels.
  • The absence of exhaust makes it possible to work indoors, which can be an important advantage when carrying out finishing and renovation work in the house.
  • The price of saws is lower than the price of gasoline saws.

The negative features of such models include the following:

  • Possible engine overheating. In this regard, the work requires frequent technological stops for cooling.
  • Relatively low power and low load variability. If the saw is focused on small objects, it will not be able to cut logs. With a gasoline saw, this trick could have worked.
  • Power supply binding.
  • Sensitivity to voltage surges and other network factors.
  • Reducing the safety of working in high humidity conditions.

Chainsaw or saw. which is better?

If you have your own house with a plot, a summer cottage, or at least a bathhouse, you will find something to cut. This is best done with an automatic chain saw, which can be gasoline or electric. To make it easier for you to decide what to choose a chainsaw or a saw, consider what the advantages and disadvantages of these options are.

So, chainsaw or saw. which is better?

It depends on the intended use. If you need a saw solely for tidying up the garden and home repairs, then it is better to purchase an electric model. If you seriously expect to harvest firewood with it and carry out other heavy work, then the best choice is a gasoline saw.

Performance

The performance of the saw is determined by the amount of work done in a certain period of time. The performance of a saw is mainly influenced by two factors: the power of its motor and the quality of the cutting attachment. If you are choosing a saw for your garden needs and do not plan to use it every day, then opt for low-power household chainsaws or non-professional grade saws. power up to 2 kW. For a small construction site and other summer cottage works, semi-professional units are suitable. from 2 to 3 kW.

In this case, an important nuance should be taken into account: with the same engine power declared, gasoline engines are much more efficient than electric ones. The gasoline engine has a much higher efficiency, that is, the engine power is almost completely transferred to the cutting part, but the electrical efficiency is much lower. Thus, an electric saw with a power of 2.5 kW will give the same result and effect when working as a gasoline saw with a power of up to 2 kW. In addition, electric saws are mainly equipped with motors up to 2 kW (less often up to 2.5 kW), that is, they are always positioned by the manufacturer as amateur. The lower performance of the saws is compensated by their low weight and ease of use.

But gasoline saws can have a built-in engine of very high power. even up to 6 kW, but this is already a professional type, used mainly for felling. Powerful chainsaws are mostly heavy and oversized, they are difficult to handle, so they are completely unnecessary for a summer resident and an amateur gardener.

If we compare the cutting parts of saws with different types of drives, then chainsaws often have a longer bar. It is convenient to cut thick trees or logs with a dyno tire. it can make a deeper cut, but an electric saw with a short bar runs faster and puts less stress on your hands. If there is a choice between two saws (gasoline and electric) with the same performance, then for small boards and cutting branches it is better to take a saw with a shorter tire. This will increase your cutting speed and make your job easier.

What is better than a chainsaw or a saw?

The thesis that a saw is a necessary tool for every owner of a private house or summer resident no longer requires proof. A comfortable and high-quality saw is one of those tools that you should always keep close at hand. It is needed to cut branches in the garden, shape the crown of trees or bushes with a saw, it is indispensable for repair and construction work: installing a frame on the roof, erecting gazebos, verandas, not to mention preparing firewood for a stove, fireplace or even for a barbecue. Since hand saws and hacksaws have long been a thing of the past, the question remains today: Which chain saw to choose, gasoline or electric-?

The main selection criteria:

The main difference between a gasoline and an electric drive is obvious: the gasoline engine works autonomously, and the electric motor is tied to the mains, and the radius of its operation is limited by the length of the power cable. Based on this, even an inexperienced user understands that it is possible to go deeper into the forest in order to cut down a tree only with a chainsaw. An electric saw will also be a useless toy on a construction site where there is no electricity or when cleaning trees in a remote garden area. But all these are extremes, and in the case when there are no problems with electricity, and the proposed work is being carried out near the house, then why not choose a light and low-noise electric saw, which, moreover, does not smoke and does not smell like fumes?

The question of choosing a saw drive always remains relevant, therefore, in order to make the right choice, it is worth determining the range of your needs and capabilities. Try to sort out in your head the main tasks and loads that you plan to perform with the saw. What is the expected rate of use of the tool? Will it be periodic work or daily workload? Will you be able to carry out maintenance in a timely manner? Do you have enough money to constantly refuel your chainsaw with expensive gasoline? And finally. what is the price of a saw that is acceptable for you personally? After answering these questions, the choice of the tool is yours, and we propose to compare the five main parameters of gasoline and electric saws.

Reliability

An electric motor is always easy, simple and understandable, but a gasoline one is undoubtedly more reliable. The very design of the internal combustion engine is such that its endurance and reliability is higher in all existing parameters. It has high revs, for the manufacture of a gasoline engine, durable and wear-resistant materials are used, which allow you to work with a saw in rain, heat and cold.

Gasoline engines have more advanced cooling and overheating protection systems, there is an air filter, all kinds of fuel and oil level control sensors are built in, so its service life is greatly increased compared to an electric motor of the same power. With proper operation, an internal combustion engine works well for a dozen years, withstanding longer and more complex loads that are beyond the power of an electric motor. That is: to build a bathhouse and sawing thick logs, buy a chainsaw, and for household repair work near the house and inside it or to prepare firewood for a fireplace. an electric one.

It should be borne in mind that all the above evidence is relevant only when comparing saws from well-known brands that have proven themselves in the market for high-quality technology. Therefore, a good German electric saw is a priori more reliable than a cheap Chinese chainsaw.

Economy

With today’s record gasoline price hike, electric and cordless saws will undoubtedly be cheaper to operate because they do not require constant filling of gasoline, oil changes and periodic maintenance or replacement of engine parts. long-term operation The savings are explained by the fact that gasoline engines have an increased service life, that is, they can work for several years without forcing you to buy a new saw.

Performance

The performance of the saw is determined by the amount of work done in a certain period of time. The performance of a saw is mainly influenced by two factors: the power of its motor and the quality of the cutting attachment. If you are choosing a saw for your garden needs and do not plan to use it every day, then opt for low-power household chainsaws or non-professional grade saws. power up to 2 kW. For a small construction site and other summer cottage works, semi-professional units are suitable. from 2 to 3 kW.

In this case, an important nuance should be taken into account: with the same engine power declared, gasoline engines are much more efficient than electric ones. The gasoline engine has a much higher efficiency, that is, the engine power is almost completely transferred to the cutting part, but the electrical efficiency is much lower. Thus, an electric saw with a power of 2.5 kW will give the same result and effect when working as a gasoline saw with a power of up to 2 kW. In addition, electric saws are mainly equipped with motors up to 2 kW (less often up to 2.5 kW), that is, they are always positioned by the manufacturer as amateur. The lower performance of the saws is compensated by their low weight and ease of use.

But gasoline saws can have a built-in engine of very high power. even up to 6 kW, but this is already a professional type, used mainly for felling. Powerful chainsaws are mostly heavy and oversized, they are difficult to handle, so they are completely unnecessary for a summer resident and an amateur gardener.

If we compare the cutting parts of saws with different types of drives, then chainsaws often have a longer bar. It is convenient to cut thick trees or logs with a dyno tire. it can make a deeper cut, but an electric saw with a short bar runs faster and puts less stress on your hands. If there is a choice between two saws (gasoline and electric) with the same performance, then for small boards and cutting branches it is better to take a saw with a shorter tire. This will increase your cutting speed and make your job easier.

Reliability

An electric motor is always easy, simple and understandable, but a gasoline one is undoubtedly more reliable. The very design of the internal combustion engine is such that its endurance and reliability is higher in all existing parameters. It has high revs, for the manufacture of a gasoline engine, durable and wear-resistant materials are used, which allow you to work with a saw in rain, heat and cold.

Gasoline engines have more advanced cooling and overheating protection systems, there is an air filter, all kinds of fuel and oil level control sensors are built in, so its service life is greatly increased compared to an electric motor of the same power. With proper operation, an internal combustion engine works well for a dozen years, withstanding longer and more complex loads that are beyond the power of an electric motor. That is: to build a bathhouse and sawing thick logs, buy a chainsaw, and for household repair work near the house and inside it or to prepare firewood for a fireplace. an electric one.

It should be borne in mind that all the above evidence is relevant only when comparing saws from well-known brands that have proven themselves in the market for high-quality technology. Therefore, a good German electric saw is a priori more reliable than a cheap Chinese chainsaw.

What is better than a chainsaw or a saw?

The thesis that a saw is a necessary tool for every owner of a private house or summer resident no longer requires proof. A comfortable and high-quality saw is one of those tools that you should always keep close at hand. It is needed to cut branches in the garden, shape the crown of trees or bushes with a saw, it is indispensable for repair and construction work: installing a frame on the roof, erecting gazebos, verandas, not to mention preparing firewood for a stove, fireplace or even for a barbecue. Since hand saws and hacksaws have long been a thing of the past, the question remains today: Which chain saw to choose, gasoline or electric-?

The main selection criteria:

The main difference between a gasoline and an electric drive is obvious: the gasoline engine works autonomously, and the electric motor is tied to the mains, and the radius of its operation is limited by the length of the power cable. Based on this, even an inexperienced user understands that it is possible to go deeper into the forest in order to cut down a tree only with a chainsaw. An electric saw will also be a useless toy on a construction site where there is no electricity or when cleaning trees in a remote garden area. But all these are extremes, and in the case when there are no problems with electricity, and the proposed work is being carried out near the house, then why not choose a light and low-noise electric saw, which, moreover, does not smoke and does not smell like fumes?

The question of choosing a saw drive always remains relevant, therefore, in order to make the right choice, it is worth determining the range of your needs and capabilities. Try to sort out in your head the main tasks and loads that you plan to perform with the saw. What is the expected rate of use of the tool? Will it be periodic work or daily workload? Will you be able to carry out maintenance in a timely manner? Do you have enough money to constantly refuel your chainsaw with expensive gasoline? And finally. what is the price of a saw that is acceptable for you personally? After answering these questions, the choice of the tool is yours, and we propose to compare the five main parameters of gasoline and electric saws.

Which one to choose? ELECTRICAL SAW or CHAINSAW

Economy

With today’s record gasoline price hike, electric and cordless saws will undoubtedly be cheaper to operate because they do not require constant filling of gasoline, oil changes and periodic maintenance or replacement of engine parts. long-term operation The savings are explained by the fact that gasoline engines have an increased service life, that is, they can work for several years without forcing you to buy a new saw.

What is better than a chainsaw or a saw?

The thesis that a saw is a necessary tool for every owner of a private house or summer resident no longer requires proof. A comfortable and high-quality saw is one of those tools that you should always keep close at hand. It is needed to cut branches in the garden, shape the crown of trees or bushes with a saw, it is indispensable for repair and construction work: installing a frame on the roof, erecting gazebos, verandas, not to mention preparing firewood for a stove, fireplace or even for a barbecue. Since hand saws and hacksaws have long been a thing of the past, the question remains today: Which chain saw to choose, gasoline or electric-?

The main selection criteria:

The main difference between a gasoline and an electric drive is obvious: the gasoline engine works autonomously, and the electric motor is tied to the mains, and the radius of its operation is limited by the length of the power cable. Based on this, even an inexperienced user understands that it is possible to go deeper into the forest in order to cut down a tree only with a chainsaw. An electric saw will also be a useless toy on a construction site where there is no electricity or when cleaning trees in a remote garden area. But all these are extremes, and in the case when there are no problems with electricity, and the proposed work is being carried out near the house, then why not choose a light and low-noise electric saw, which, moreover, does not smoke and does not smell like fumes?

The question of choosing a saw drive always remains relevant, therefore, in order to make the right choice, it is worth determining the range of your needs and capabilities. Try to sort out in your head the main tasks and loads that you plan to perform with the saw. What is the expected rate of use of the tool? Will it be periodic work or daily workload? Will you be able to carry out maintenance in a timely manner? Do you have enough money to constantly refuel your chainsaw with expensive gasoline? And finally. what is the price of a saw that is acceptable for you personally? After answering these questions, the choice of the tool is yours, and we propose to compare the five main parameters of gasoline and electric saws.

Reliability

An electric motor is always easy, simple and understandable, but a gasoline one is undoubtedly more reliable. The very design of the internal combustion engine is such that its endurance and reliability is higher in all existing parameters. It has high revs, for the manufacture of a gasoline engine, durable and wear-resistant materials are used, which allow you to work with a saw in rain, heat and cold.

Gasoline engines have more advanced cooling and overheating protection systems, there is an air filter, all kinds of fuel and oil level control sensors are built in, so its service life is greatly increased compared to an electric motor of the same power. With proper operation, an internal combustion engine works well for a dozen years, withstanding longer and more complex loads that are beyond the power of an electric motor. That is: to build a bathhouse and sawing thick logs, buy a chainsaw, and for household repair work near the house and inside it or to prepare firewood for a fireplace. an electric one.

It should be borne in mind that all the above evidence is relevant only when comparing saws from well-known brands that have proven themselves in the market for high-quality technology. Therefore, a good German electric saw is a priori more reliable than a cheap Chinese chainsaw.

Performance

The performance of the saw is determined by the amount of work done in a certain period of time. The performance of a saw is mainly influenced by two factors: the power of its motor and the quality of the cutting attachment. If you are choosing a saw for your garden needs and do not plan to use it every day, then opt for low-power household chainsaws or non-professional grade saws. power up to 2 kW. For a small construction site and other summer cottage works, semi-professional units are suitable. from 2 to 3 kW.

In this case, an important nuance should be taken into account: with the same engine power declared, gasoline engines are much more efficient than electric ones. The gasoline engine has a much higher efficiency, that is, the engine power is almost completely transferred to the cutting part, but the electrical efficiency is much lower. Thus, an electric saw with a power of 2.5 kW will give the same result and effect when working as a gasoline saw with a power of up to 2 kW. In addition, electric saws are mainly equipped with motors up to 2 kW (less often up to 2.5 kW), that is, they are always positioned by the manufacturer as amateur. The lower performance of the saws is compensated by their low weight and ease of use.

But gasoline saws can have a built-in engine of very high power. even up to 6 kW, but this is already a professional type, used mainly for felling. Powerful chainsaws are mostly heavy and oversized, they are difficult to handle, so they are completely unnecessary for a summer resident and an amateur gardener.

If we compare the cutting parts of saws with different types of drives, then chainsaws often have a longer bar. It is convenient to cut thick trees or logs with a dyno tire. it can make a deeper cut, but an electric saw with a short bar runs faster and puts less stress on your hands. If there is a choice between two saws (gasoline and electric) with the same performance, then for small boards and cutting branches it is better to take a saw with a shorter tire. This will increase your cutting speed and make your job easier.

Economy

With today’s record gasoline price hike, electric and cordless saws will undoubtedly be cheaper to operate because they do not require constant filling of gasoline, oil changes and periodic maintenance or replacement of engine parts. long-term operation The savings are explained by the fact that gasoline engines have an increased service life, that is, they can work for several years without forcing you to buy a new saw.

Security

In terms of safety, chainsaws are ahead of electric ones due to the lack of an electric cable, which you have to constantly pay attention to. In wet and rainy weather, the saws must not be operated, as well as in damp rooms.

Regarding possible injury by the cutting part. the saws are absolutely identical, you can only get injured in case of gross violation of the operating rules.

Lever for instant stop of the chain in case of kickback. It is equipped with both electric and gasoline chain saws.

Ultimately, it is quite difficult to determine which is better than an electric or chainsaw. It all depends on the specific tasks and operating conditions. Judging by the prevalence and popularity of tools, then both varieties of chainsaws have the right to life and do an excellent job with their tasks. It is only important to buy a quality tool, not cheap fakes.

Preparation and maintenance

saws are more convenient when preparing for work. It is enough to install the saw headset, fill in oil and plug into the socket. At the same time, most high-quality saws are equipped with quick-release devices that allow you to tighten the chain or replace it in a few minutes.

Quick-release chain tensioner.

With chainsaws, this is more difficult. semi-professional and professional saws are equipped with traditional clamps on nuts, which cannot be disassembled without a key. And the chain is tightened with a screwdriver or a special hex wrench. It takes a little longer, but the settings are guaranteed to hold tight.

Conventional chain tensioner.

Preparation of a fuel mixture for a chainsaw takes several minutes. special containers with graduations allow you to mix gasoline and oil in a given proportion in any amount. As a rule, one tank filling is enough for 40-50 minutes of work. Having prepared 2.3 liters of fuel in the morning, you will be provided with it for the whole working day. Prepare the mixture for future use, it should not be for several days, with prolonged storage its properties deteriorate.

Complexity of maintenance and use

What’s better. chainsaw or chain saw

Chainsaws are among the most common among woodworking tools. This is determined by their performance, compactness, and relatively low cost of consumables. Practically only an endless toothed chain interacts with a tree, the resource of which is quite high, and only periodic sharpening is required from maintenance.

There are two types of chain saws. gasoline and electric. The first set in motion the saw chain using a two-stroke gasoline air-cooled engine with a power of 1.5. 5 kW, the second. an electric motor with a power of up to 2.5 kW. If we compare the consumption of fuel and electricity, then for gasoline and saws, the cash costs for cutting 1 m 3 of material will be approximately the same.

But to determine which is better than a chainsaw or a saw, it is necessary based on a set of characteristics, and not just the cost of fuel or electricity. Purchase costs, maintenance, ergonomics, maintainability and ease of use are equally important factors influencing the choice.

Power and performance

As already mentioned, the power of saw engines rarely exceeds 2.5 kW, and for chainsaws it can reach 5. 6 kW. But even a 2.5 kW saw cannot be compared in performance with a gasoline of similar power. The fact is that at an average load, the saw can work continuously for up to 40 minutes, after which it must be turned off for 20 minutes so that the motor cools down.

Chainsaws do not have this problem, if you do not take into account the cheap household tools. Semi-professional and industrial ones do not require such stops and can work 8 hours a day practically without stopping. The time for refueling and oil does not count. this operation takes several minutes. It is worth considering that oil is also poured into the saws.

Chainsaw chain speed is 25. 30% higher than electric chain speed. Accordingly, productivity increases as well. Taking into account the possibility of quick movement of the operator with the chainsaw around the construction site or along the board or log, which is difficult for the saw due to the presence of a cable, productivity increases even more. If we compare a chainsaw and a saw of the same power, then the performance of a gasoline one is slightly higher.

Design features of electric and gasoline chain saws

Difference in power, performance, saw headset and price

Chainsaw device

The basic unit of the chainsaw is a high-speed engine (12. 14,000 rpm) with a volume of 40. 60 cm3. A feature of such a motor is that gasoline of the A92 or AI95 brand is mixed with a special oil immediately before filling the tank. If you refuel the chainsaw with clean gasoline, the engine will fail a few seconds after starting.

Interlocked with the engine:

  • centrifugal clutch;
  • leading sprocket;
  • tire;
  • chain lubrication oil pump;
  • brake.

The engine is started with a recoil starter (lanyard). The handle of the chainsaw is equipped with an anti-vibration mechanism and a special inertial protection. if the saw chain gets jammed, it can be thrown back strongly, there is a real possibility of injury to the sawer. The protective arc, in contact with the operator’s hand, instantly stops the engine and eliminates the possibility of damage from the rotating chain.

Saw chains are used in several types, for their selection, the most often used classification is by step. the distance between the lower teeth meshing with the drive sprocket.

The chain thickness is in the range 1.3. 1.6 mm. For household and semi-professional saws, a chain with a thickness of up to 1.45 mm is sufficient, for professional ones used for felling wood, chains with a thickness of 1.5. 1.6 mm are required.

Tire.
2. Chain.
3. Inertial chain brake.
4. Cylinder cover.

Starter handle.
6. Safety trigger.
7. Throttle trigger.
8. Throttle lever.

Rear handle.
10. Oil tank cover.
11. Front handle.
12. Gas cap.

Working conditions and environmental friendliness

Comparing two tools. a chainsaw or a saw, many consumers pay attention to factors such as ease of use, as well as environmental friendliness.

the saws are quite easy to use: the tool is started by pressing one button. Quite lightweight and compact devices will become indispensable helpers for simple work: to cut something nearby at home, cut knots, cut thin logs. But when working with a tree with a denser structure, the saw power may not be enough.

You should also take into account the fact that the power tool can work continuously for only 20 minutes, since its engine heats up very quickly, while chainsaws work successfully without interruption for several hours.

Choosing a saw for work, you should be prepared for the fact that it will be possible to use it only under favorable weather conditions. Excessive moisture can damage the instrument. the saw is an indispensable tool for working indoors: the compact design in operation produces a minimum of vibration and little noise.

the saws are quite easy to use: in the process of work, it is enough to monitor the chain tension and the level of lubricant for this chain. When working with chainsaws, you should also monitor the lubrication of the engine itself.

Chainsaws run on a fuel mixture. The engine of the tool is started by means of a starter cord

For many users who have not experienced the use of chainsaws, the need to prepare a fuel mixture, monitor the quality and quantity of components, is a limiting factor in choosing this type of product. Manipulation of starting and maintaining the instrument is not as difficult as it seems at first glance.

For working in closed rooms, a chainsaw is not the best option: the fumes and exhaust gases emitted during the operation of the tool do not make it possible to spend a long time in an unventilated room

Chainsaws are less picky about weather conditions: light rain and even snow do not interfere with her work. But, at the same time, in severe frost, the chainsaw may not start at all, which cannot be said about the saw.

What is better than a chainsaw or a saw: a comparative review of units

The arrangement of a suburban area is impossible without the use of all kinds of tools. The issue of acquiring a saw, necessary for sawing firewood and boards, as well as other woodwork, at some point necessarily arises before the owner of a country house. Which is better than a chainsaw or a saw? Both tools are noteworthy. The only question is which one to choose. Each of the devices has its own advantages and disadvantages.

The power supply is the main distinguishing feature

Since the saw is powered by electricity, the use of this type of tool is possible only in places where it is possible to connect to the mains. It is convenient to work with such a tool at home, during construction. When working with a saw, difficulties may arise when it is necessary to carry out work not only in the immediate vicinity of the house, but also to process the entire area.

For smooth movement with the tool around the site for outdoor work, you will need to purchase an extension cord several tens of meters long

In addition, during active movement, for example, during pruning of fruit trees, it is necessary to ensure that the cord from the power tool does not get tangled under your feet and does not fall under the operating saw chain.

the saw is more intended for construction work: it is convenient for it to cut wood lengthwise and cut thin boards. Saw cuts are even and smooth.

Due to the main feature of chainsaws. mobility, they are an indispensable tool for logging. Easy-to-use tools can be used in virtually any position

The main trump card of the chainsaw is autonomy. The chainsaw will become a handy tool for farming in rural areas, where power surges are not uncommon. Owners who practice outings in order to organize an active holiday: a picnic, expedition, hunting or fishing can always take a handy tool with them in the trunk of their car.

The financial side of the issue

If we consider the purchase of an electric or chainsaw from a financial point of view, then saws are a more economical option. The cost of saws is an order of magnitude lower than their “gasoline” counterparts.

At the same time, repair of saws in the event of a breakdown is most often carried out in workshops, while maintenance of the gas unit, as well as minor repairs, can be done independently: https://diz-cafe.com/tech/remont-benzopily-svoimi-rukami.html

Electrical appliances are more profitable than gasoline ones due to the fact that they do not need to purchase consumables such as gasoline and oil for the engine. In addition, the saw models are equipped with fewer components and spare parts than gasoline-powered units. Yes, the electricity needed to power the saw will contribute to the cost, but the cost of electricity is always less than the price of gasoline. Although economical models of modern chainsaws can reduce this price difference.

Regardless of what type of tool the owner chooses, the saw will become a real “magic wand”, facilitating the work of improving the site.

Which saw to choose: benzo or electric?

Gasoline or electric? This question arises before every potential buyer of a saw. Tired of manually sawing boards, storing firewood and doing minor construction work? It’s time to automate the process! There are many ardent supporters of both benzo and drank. Many owners of certain products will never give them up in favor of another option. But still, there are objective reasons to prefer this or that device to a particular user.

First you need to understand: both a chainsaw and a saw are well suited for various purposes. Both devices do an excellent job of cutting logs. To choose a tool that is more useful for yourself, you need to consider your working conditions.

Which is better than a chainsaw or a saw

For home. electric, for the yard. gasoline

Which saw will do the job well: a chainsaw or a saw? The answer to this question has long been found among the owners of the instrument. If you are going to work indoors or near it, there is no problem with carrying or supplying electricity. it is better to prefer a saw. And vice versa, if the front of the work. trees, garden, forest, bushes, remote from the house, then a gasoline product will be optimal.

For household chores, it is better to prefer a saw for several reasons.

  • Easy to operate. The owner has only two things to do: turn the device on and off from the outlet. You do not need to fill in gasoline, dilute it with oil, jerkily try to start the saw. When turned off, the work stops immediately, there is no need to drain the fuel.
  • Comfort. Even with the most intensive work, there is no smell of gasoline and smoke, and the noise is incomparably lower than on a gasoline analogue. This is very convenient for indoor work: not everyone can easily tolerate gasoline vapors.
  • No ICE breakdowns. The electric motor is much less finicky than the gasoline one. Poor quality fuel, incorrect proportion of fuel and oil, elementary wear of components. and the chainsaw won’t start. Only a master will be able to tell what exactly the breakdown is.

At the same time, there is no equal to a chainsaw far from home. Why?

  • Power. The chainsaw is more powerful than its electric counterpart: the chain spins faster, takes more powerful tree species and thicker trunks. Where the saw gets stuck, the gasoline one will cut even the largest branches and logs into firewood without any problems.
  • Practicality. Take such a tool with you to the garden, forest and even climb a tree with it. You won’t get tangled up in extension cords, won’t worry about carrying lengths or power outlets.
  • No dependence on electricity in the network. Periodically, the electricity goes out: if there is an accident on the mowing line, then it will be for a long time. With a chainsaw, work will not be idle: workers will usefully spend precious hours, and summer residents. weekend.

Which saw is right for you: electric or petrol? Correct answer. both. Each of them is good in certain operating conditions.

We have a wide range of tools for you. With the help of levels, multimeters, rangefinders and tape measures, you can make all the necessary measurements before carrying out construction work. Saws, planers, hammer drills and drills can help with joinery, frame assembly and flooring. Nailers, screwdrivers, wrenches, staples and pistols are also available. with them, you can significantly relieve your hands. Every home craftsman, specialist or construction team will find many useful tools that will simplify your work.