Cleaning a lawnmower carburetor. How to Clean a Craftsman Lawn Mower Carburetor: Step-By-Step

How to Clean a Craftsman Lawn Mower Carburetor: Step-By-Step

It’s not unusual for a carburetor to stop functioning correctly because it has gummed up causing the fuel jet to become clogged or the float to become stuck.

Old fuel can be the main cause of a carburetor not working. Making sure you’re running the right gas through your Craftsman mower and only using fresh gas will help minimize the negative effects on the carburetor.

Symptoms of a Bad Craftsman Mower Carburetor

When your carburetor is acting up, it is no longer able to correctly regulate the fuel-to-air mixture required by your Craftsman’s engine. You could experience these symptoms:

• Mower won’t start
• Engine backfires from running lean
• Engine sputters and runs rough
• Engine surges
• Consumes too much fuel

This post may include affiliate links. Purchases made through these links may provide a commission for us, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

Follow all safety instructions provided in your equipment operator’s manual before diagnosing, repairing, or operating. Consult a professional if you don’t have the skills, or knowledge or are not in the condition to perform the repair safely.

Steps to Clean a Craftsman Lawn Mower Carburetor

If you have a fuel system problem and have confirmed you are getting a good supply of fuel to the carburetor, perform one more step to confirm you need to disassemble and clean your carburetor.

Remove the air filter from the air filter housing. Spray carburetor cleaner into the air intake and start your Craftsman mower. If your mower starts, runs, and then dies, you should disassemble your carburetor and clean it.

Gather Tools Supplies

• Pliers
• Screwdriver
• Socket/ratchet set
• Carburetor Cleaner
• Thick wire
• Needle nose pliers

Take Photos

Most people have a cell phone available nearby. It probably has a camera on it making photo-taking a quick easy process. If you have one of these, you should use it to document steps.

Even if you have a great memory, I highly recommend you take multiple photos of your carburetor before and during the tear-down process.

You will be working with many small parts. It will be good to have photos to reference to make sure you put your carburetor back together the correct way. You’re better off taking these photos and not needing them over not having photos at all.

Shut off the Fuel Supply

Stop the fuel flow on your Craftsman lawn mower. Use the fuel shut-off valve located on the bottom of your fuel tank. If you don’t have a valve on your mower, crimp the fuel line.

Remove the Throttle Choke Cable

Detach the throttle and choke cables from your carburetor.

Remove the Air Filter Housing

Remove the hardware that attaches the carburetor to the air filter housing so it is detached.

Remove the Craftsman Mower Carburetor

Slowly remove the springs from the carburetor. Do not stretch the springs or you’ll have to replace them. You may have to twist the carburetor a bit to get the springs to come off the carb.

Be careful not to rip the gasket between the engine block and the carburetor or you will have to replace it with a new gasket.

Remove the Carburetor Bowl

Now locate the bowl on the bottom of your carburetor. This is the place a small amount of fuel is collected once it leaves the fuel tank. Have a rag available to soak up any remaining fuel in the bowl.

Remove the screw located at the bottom of the bowl and lower the bowl to remove it from the carburetor. You will find a gasket located around the bowl. It looks like a rubber Band.

Do not get any carburetor cleaner or other substance on the gasket as it will ruin it. If you do, the gasket must be replaced before the bowl is reattached.

Check the Stem for Clogged Holes

You will find a stem that hangs down in the center of your Craftsman’s carburetor. The holes in the stem can become clogged with the gumming of old fuel. With a flashlight to better see the holes, use a thick wire to unclog them.

Remove White Crusty Buildup and Gumming

Check the other component in your carburetor along with the carburetor itself for additional gumming and a white crusty buildup.

Remove the gummy deposits along with as much of the crusty material as possible using a carburetor cleaner. Note: It is almost impossible to remove all the crusty material.

Reassemble the Carburetor

Once you have finished cleaning the carburetor in your Craftsman lawn mower and ensured all the components are in good working order including your float needle and float, go ahead and reassemble the carburetor.

Reverse the steps you went through when you removed your carburetor. Use the photos you took earlier for reference.

Add Fresh Fuel Allow It to Fill the Fuel Bowl

Make sure you aren’t running old fuel through your Craftsman or you may soon run into the same problems with your carburetor. Use the right type of fuel and allow your fuel bowl to fill with fuel.

Replace or Rebuild Your Craftsman Carburetor When Cleaning is Unsuccessful

Sometimes cleaning your carburetor doesn’t make it carburetor function correctly. You may have small components in your carburetor that must be replaced or old fuel has caused so much damage you need to replace the carburetor.

Rebuild or replace your carburetor. You will need to have your engine model and spec available to ensure you order the correct part(s). Craftsman uses other manufacturers’ small engines in their mowers.

You can order a replacement carburetor or rebuild kit online, at your local Craftsman dealership, or at an authorized engine dealership.

Fill Your Fuel Tank with Fresh Gas and a Fuel Additive

Run a good supply of fresh gasoline through your gas-powered Craftsman lawn mower. Don’t let it sit in your mower for long periods of time. Use a fuel additive to stabilize like Sea Foam Motor Treatment in your fuel to minimize future fuel issues.

Read more about using Sea Foam as a fuel stabilizer and why it is what I use in my lawn mower.

Cleaning Your Craftsman Carburetor Didn’t Solve Your Problem

If cleaning your carburetor didn’t solve your problem and you still have problems in your fuel system. Check out my article, This is Why Your Craftsman Lawn Mower Isn’t Getting Fuel.

If you aren’t sure it is a fuel system problem, I have put together a list of common Craftsman mower problems and solutions where I address starting, fuel system, smoking, overheating, cutting problems, and more. You can find it at Common Craftsman Lawn Mower Problems.

Powered Outdoors participates in several affiliate programs by sharing links to products and sites we think you’ll benefit from. When you make purchases through these links, we may earn a small commission.

How to Clean a Riding Lawn Mower Carburetor

To clean a riding lawn mower carburetor, you will need to remove it from the engine, disassemble it and then use compressed air and cleaning solution to remove dirt buildup. First, disconnect the spark plug wire and shut off the fuel valve. Next, remove the bolts that hold the carburetor in place.

Take out any gaskets or filters associated with the carburetor before separating its components. Clean each component using pressurized air and spray-on cleaners designed specifically for carburetors. Finally reassemble all pieces of your carburetor before installing it back onto your riding lawn mower’s engine by reversing these steps.

• Step 1: Remove the air filter
• First, remove the air filter from your lawn mower by unscrewing it and then pulling it out of its housing
• Make sure to wear protective gloves while doing this, as engine parts may be sharp or dirty
• Step 2: Unscrew the carburetor cover
• Find the carburetor located on top of your riding lawn mower’s engine and unscrew its cover using a screwdriver in order to access the internal components
• Step 3: Disconnect any electrical cables connected to the carburetor
• There might be one or more electrical cables connected to your carburetor that must first be removed before proceeding with cleaning it
• Loosen them gently with pliers, but do not pull them off entirely yet – just enough so they can move freely without disconnecting from their port completely
• Step 4: Clean all individual parts of the carburetor separately with a cloth dampened in warm water mixed with dish soap solution until all dirt has been removed from each part thoroughly
• Ensure that no dirt is left behind when cleaning these components, otherwise you risk jamming up your riding lawn mower’s engine later on when trying to start it back up again after cleaning its carburetor!Step 5: Reassemble all pieces back together once everything has been properly cleaned and dried off completely
• Start by reattaching any electrical wires disconnected earlier (if applicable) followed by putting back together each piece of the disassembled unit into place one-by-one according to instructions provided in order for proper assembly of this component takes place correctly upon reassembly

How Do You Clean a Carburetor on a Riding Lawn Mower Without Removing It?

To clean a carburetor without removing it, the following steps should be followed: 1. Disconnect the spark plug wire and battery cable. 2. Use compressed air to blow out dirt and debris from around the outside of the carburetor and any openings that can be seen.

Pour some cleaner into a spray bottle and saturate all accessible areas of the carburetor with it. 4. Allow cleaner to sit for five minutes before using compressed air again to remove any remaining residue or debris from inside or outside of the carburetor components.

Reconnect spark plug wire battery cable once cleaning is complete, then start engine allow to run for several minutes before use.Cleaning your riding lawn mower’s carburetor without removing it can help keep your machine in good condition for many years!

How Do I Clean a Carburetor on a Riding Lawn Mower?

Cleaning a carburetor on a riding lawn mower is an important maintenance task to ensure it runs at peak performance. Here are the steps: 1. Drain existing fuel from tank and replace with fresh fuel.

Disconnect air filter, spark plugs, and choke cable from the carburetor. 3. Detach the bowl nut located beneath the carburetor and remove float assembly parts for cleaning in solvent or compressed air if necessary. 4. Use a small brush to clean all visible areas of dirt or debris around gaskets and sealing surfaces on the body of the carburetor itself before re-assembly with new components as needed according to your operator’s manual instructions; use only manufacturer recommended parts when replacing components that have been removed during cleaning process to prevent damage or malfunctioning due to improper fitting parts being used instead).

After completion of re-assembly, reconnect all disconnected components back onto their original positions and test ride lawn mower for proper operation before returning it into service mode again for continued use afterwards!

How Do I Know If My Lawn Mower Carburetor is Clogged?

To determine if your lawn mower carburetor is clogged, there are a few key signs to look out for: Difficulty starting – A clogged carburetor can make it difficult or impossible to start the engine. Poor running performance – The engine may run erratically and/or at reduced power due to lack of fuel being delivered.

Unusual noises – If the carburetor is blocked by debris, air won’t be able to properly mix with fuel causing strange sounds from the engine.If you suspect your lawn mower’s carburetor may be clogged, it’s important to take steps immediately in order to avoid further damage and ensure optimal performance.

What are the Symptoms of a Dirty Carburetor?

A dirty carburetor may lead to a variety of engine issues. Symptoms include: Poor fuel economy

Difficulty starting the engine Rough idle or stalling when coming to a stop Excessive exhaust smoke, especially black smoke

If you experience any of these symptoms, it’s likely that your carburetor needs cleaning and servicing.

How to Clean a Carburetor on a Riding Lawn Mower Without Removing It

Keeping your lawn mower’s carburetor clean is essential for it to run properly. If you don’t want to take apart the entire carburetor, there are still some steps you can take to make sure it stays in good condition. Begin by removing the air filter cover and air filter from the engine.

Then use a spray cleaner or compressed air to blow out any dirt or debris that has accumulated inside of the carburetor. You can also remove any clogs with a thin wire brush or needle nose pliers if necessary. Finally, replace both the air filter and cover before running your mower again!

How to Clean a Lawn Mower Carburetor

Regularly cleaning a lawn mower’s carburetor is essential for its longevity and proper functioning. To clean the carburetor, first remove the air filter and spark plug, then unscrew any fittings to access the carburetor. Next, use a brush or rag to wipe away any dirt buildup in and around the ports of the carburetor.

Finally, use an approved cleaner to spray into each port before reassembling all parts back into place.

How to Clean a Carburetor Without Removing It

Cleaning a carburetor without removing it is possible and can be done by first spraying the entire assembly with an aerosol-based cleaner. After waiting for the cleaner to break down any built up grime, dirt or grease, use a small brush to gently clean away any residue that remains. Be sure not to put too much pressure on the delicate parts of the carburetor as this could cause damage.

Once all debris has been removed, rinse off with water and reassemble your carburetor in its original state.

Lawn Mower Carburetor Problems

A common problem with lawn mower carburetors is clogged jets, which can be caused by a buildup of dirt and debris in the fuel tank. This can lead to poor engine performance and difficulty starting your lawn mower. To fix this issue, you should clean out the carburetor following the manufacturer’s instructions or have it serviced by an experienced technician.

Additionally, make sure that you’re using fresh gasoline and changing spark plugs regularly to help prevent future carburetor problems.

Clean Carburetor Lawn Mower Craftsman

Craftsman lawn mowers are known for their reliability, but even the best machines need maintenance from time to time. One of the most important maintenance tasks is cleaning your carburetor, which helps prevent buildup and keeps your engine running smoothly. To do this you’ll need some basic tools such as a wrench and screwdriver, along with some specialty products designed specifically for cleaning out a Craftsman lawnmower’s carburetor.

With these items in hand, you can clean your carburetor easily and keep it running strong for years to come!

Lawn Mower Carburetor Repair

A carburetor is an essential part of a lawn mower’s engine system, as it manages the flow of air and fuel into the combustion chamber. If your lawn mower isn’t running correctly, it could be due to a malfunctioning carburetor. Repairing or rebuilding your lawn mower’s carburetor can often solve this problem and get your machine up and running again in no time.

It’s best to consult with a professional if you don’t have experience working on small engines; however, there are many online tutorials available for those who wish to take on the task themselves.

Lawn Mower Carburetor Cleaner Home Depot

Home Depot carries a range of lawn mower carburetor cleaners to help you keep your mower running smoothly. These products can clean buildup from the carburetor and other engine components, restoring peak performance and fuel efficiency. They are available in both aerosol spray cans and liquid form, depending on your needs.

Make sure to read the product label carefully before using any cleaner to ensure it is suitable for use with your particular type of mower engine.

How to Clean a Small Engine Carburetor Without Removing It

Cleaning a small engine carburetor without removing it is possible with the right tools and process. You’ll need a good quality carburetor cleaner, an air compressor, and some basic mechanical knowledge. First, use the air compressor to blow out any dirt or debris that has accumulated in the carburetor’s body.

Then spray down all of its components with the cleaning solution. Finally, use compressed air to dry off all of the parts before reassembling them back onto your small engine.

Conclusion

In conclusion, cleaning a riding lawn mower carburetor is an important part of maintaining your machine. By following the steps outlined above, you can keep your engine running smoothly and efficiently while also avoiding costly repairs. With regular maintenance, your riding lawn mower will be able to serve you for many years to come.

How To Locate and Clean The Carburetor On A Lawn Mower? | A Beginners Guide

Like a car engine, the carburetor on a lawn mower helps the engine run. It ensures that a proper mix of gas and air enters the engine cylinder to allow for proper combustion, increasing overall fuel efficiency. In addition to overtime wear and tear, the carburetor of a lawn mower is also prone to damage from the lawn debris that can clog up the air filters, thus limiting the carburetor and lawn mower’s function. In this article, find out where is the carburetor on a lawn mower.

Keeping the carburetor of your lawn mower clean, well-maintained and in good shape is very important. It is a great way to save yourself some money, increase the lifetime of your mower and avoid unnecessary headaches and hassles down the road.

However, mower engines are quite compact, and most people often find it very difficult to locate various engine components, especially the carburetor.

Generally, the carburetor of a lawn mower is located behind the air filters, and it is often blocked from the view. So, you can start by looking for a square-shaped or circular filter housing. This filter housing usually contains a foam or paper filter. In addition to that, you can also locate the carburetor by tracing the fuel pipeline coming from the gas tank of your mower.

That said, lawn mowers come in a range of shapes and sizes. Depending on the lawn mower you have and its manufacturer, the location of the carburetor can vary.

So, you will need to understand a lot more about mower carburetors before you can precisely locate them, and we are here to help. So, let’s get started!

Lawn Mower Carburetor 101

Before we get into locating and fixing the carburetor of a lawn mower, it is important to understand what a carburetor is, how it works, what it looks like and why taking care of a lawn mower carburetor is essential.

What Is A Lawn Mower Carburetor?

The carburetor is an essential part of a gasoline-powered lawn mower’s engine. It regulates the flow of fuel from the gasoline tank and air from the environment in a correct combination. However, unlike the carburetor system used in a vehicle, the carburetor of a lawn mower is generally placed in a horizontal position.

In addition to that, the carburetor of a lawn mower also does not have any throttle butterflies. The carburetor is the lungs of a lawn mower, and it is a complex device with multiple connections. These connections typically include air lines, fuel lines and exhaust lines.

What Does A Carburetor Do In A Lawn Mower?

You might already know that any gasoline-powered engine burns fuel to generate power. However, what you might not know is that the fuel must be mixed in a correct ratio with air to yield maximum energy and fuel efficiency.

This is where the carburetor comes in; the carburetor of a lawn mower determines how long the engine has been running, the speed at which the mower is moving, the type of train that you are crossing and then adjust the balance of fuel and air accordingly.

If the carburetor of a lawn mower is not working correctly, the engine of the mower can still run; however, the fuel efficiency and engine power will be significantly reduced.

How Does A Lawn Mower Carburetor Work?

The carburetor of a lawn mower has two chambers. One chamber is known as the carburetor’s bowl, which stores fuel that will be injected into the second chamber, known as the combustion chamber.

As you might have already guessed by now, fuel mixes with air and burns in the combustion chamber.

A float pin in the carburetor’s bowl regulates the amount of fuel that enters the combustion chamber. In the combustion chamber, a spark plug ignites the air and fuel mixture, which produces thrust that, in turn, pushes the piston of the mower’s engine.

The piston then rotates the crankshaft, and this is how the blades on a mower spin.

What Does A Carburetor On A Lawn Mower Looks Like?

The carburetor of most lawn mowers looks very similar. Usually, it is a medium-sized metal component with springs and levers.

Carburetor can be rectangular, round or bowl-shaped. If you hold a carburetor in your hand, you will notice that it has two main openings. One opening is for air intake, and the other is for the exit when.

However, not all lawn mower carburetors look similar. For example, carburetors are now available in the market that are made of plastic, and some of the latest lawn mowers are using them.

Also, the fuel bowl on these plastic carburetors is not as pronounced as the conventional gas bowls in the older models of the lawn mowers.

Where Is The Carburetor Located On A Lawn Mower?

The carburetor of a lawn mower is typically hidden from the view. It is typically present inside or behind an air filter which in some cases has a hood on top. over, the location of the carburetor varies depending on the type of lawn mower and its manufacturer.

However, if you know what you are looking for, finding the carburetor of a lawn mower is not difficult. You can locate the carburetor by simply tracing the air filter or the fuel lines. Here’s a complete guide on how to locate the carburetor of a lawn mower:

Park The Lawn Mower

Park the lawn mower in a comfortable, preferably flat spot so that you do not risk accidentally rolling over the lawn mower. Also, ensure that the ignition is turned off and the engine is cool so that you do not risk burning yourself in the process.

Remove The Engine Hood

As already stated, not all lawn mowers will have engine hoods. It is usually the riding lawn mowers that come with an installed engine hood. So, if your lawn does not have a hood, you can skip this step. The hood is used to protect the engine.

You will have to remove the engine hood to reach the mower’s carburetor. The hood is usually attached to the mower’s body by hood latches. Just release the hood latches on both sides, and you will be able to see all parts of the engine.

Locate The Air Filter

The carburetor of a lawn mower is usually located beneath or behind the air filter. So, you will have to first locate the air filter of your lawn mower, which is often encased in a filter housing.

Depending on the shape of the carburetor, the housing of the air filter can be square or round. The air filter housing is usually located on the side or top of the mower’s engine, and it has slits or holes in it for air intake.

The filter housing is usually attached to the carburetor by screws or fasteners that hold the filter in its place. The filter is usually made up of paper or foam.

The function of the air filter is to prevent dust and lawn debris from entering the carburetor. All in all, finding the filter housing is the key to finding the carburetor of the lawn.

Locate The Gas Tank

Another way of locating the carburetor of a lawn is to trace the gas tank and fuel lines of the mower. For most lawn mowers, locating the gas tank is an easy task.

It is the place where you add gasoline. However, there are some lawn mowers on the market that, just like cars, have the filling cap and gas tank in a different location.

Some lawn mowers also have their gas tank covered. Nonetheless, a gas tank is very easy to locate due to its characteristic shape.

If you can locate the filling cap, you can quickly locate the gas tank by tracing a fuel line to it. From there, it would be straightforward to locate the carburetor of your lawn mower.

The carburetor is usually located next to the fuel tank at some height below it.

Pinpoint The Mower Carburetor

Once you have located both the air filter and the gas tank of your lawn mower, locating the carburetor is easy.

A carburetor is a metal object underneath, beneath, or behind the air filter with springs and levers. These springs and levers regulate the flow of air and fuel into the carburetor for efficient combustion.

If you look closely, you can clearly see that the carburetor has two large holes in it. One of these holes is from where the air enters the combustion chamber of the carburetor.

In the combustion chamber, it is mixed with fuel and then ignited. Due to ignition, the temperature rises, air expands, and it is forcibly ejected through the second hole.

Also, the carburetor of a lawn mower is usually black, lies in the center of the main body and has connections with nearly every essential part of the mower.

However, not all lawn mowers have the same-looking carburetor. The size and shape of the carburetor varies greatly with mower types and mower manufacturers, as described below.

Carburetors On Walk-Behind Mowers

Walk-behind mowers usually come in four different variations. Depending on your needs and requirements, one type might work better for you than the others.

Below we have described the different types of walk-behind mowers and their uses. Following that, we will discuss how you can locate the carburetor of a walk-behind mower.

Electric Walk Mower

As apparent by the name, an electric walk mower runs on electricity. It will not have a carburetor as it runs on an electric motor. Such mowers are suitable for small properties.

Self-Propelled Mower

When you have a large lawn or a big area to mow, self-propelled mowers come in handy. Self-propelled mowers come in two variations: 1) Front-wheel drive and 2) Rear wheel drive. Front-wheel drive lawn mowers are suitable for lawns that are even or flat.

Whereas rear-wheel drive lawn mowers are suitable for lawns with a slope or a lawn located on a sidehill. Nonetheless, both lawn mowers are great for mowing large areas.

How To Locate The Carburetor On A Walk-Behind Lawn Mower?

For most walk-behind lawn mowers, you will find the carburetor on one side of the main body. It is located near the base of the lawn mower. Once again, tracing the air filter and fuel lines is the key to locating the carburetor of a lawn mower.

However, if you are having trouble finding the carburetor of your walk-behind lawn mower, we suggest that you look for the round or square filter housing. It is usually located on the side in walk-behind mowers, though sometimes it might be on the top.

The manufacturers usually make it easy to locate and remove the filter housing so that lawn owners can easily swap filters independently. Once you have located the filter housing, you can pop it open to access the lawn mower’s air filter.

There might be a few screws, latches or bolts holding the filter housing above the carburetor in its place. Ensure that you do not lose the screw or bolts when removing the housing.

Carburetors On Riding Mowers

If you have a very large turf or need to mow a very large area such as a sports field turf, walk-behind mowers just do not cut it.

For such situations, you will need a riding lawn mower. It is more powerful than a walk-behind mower, and you can sit on top of the machine while mowing for easy maneuvering and movement.

Like walk-behind lawn mowers, riding lawn mowers also come in multiple variations. We have described different types of riding mowers in the text below.

Make sure that you know which type of riding mower you have so you can refer to the correct part of this article:

Zero Turn Radius Mower

A zero-turn radius mower has a turning radius that is effectively zero. It can literally turn on a dime and is known for its speed and maneuverability.

Lawn Tractor

A lawn tractor mower has its cutting deck located in the middle of the body. They usually have more power than the other types of riding mowers. Therefore, they are very suitable for mowing large expanses of land.

Rear Engine Riding Mower

It is the smallest of all riding mowers. Unlike the lawn tractor, it has its cutting deck located in the front, making moving around much more effortless. However, it is not as powerful as a lawn tractor due to its small size.

How To Locate The Carburetor On A Riding Lawn Mower?

Identifying and locating the carburetor is generally difficult in riding lawn mowers compared to walk-behind lawn mowers.

It is because riding lawn mowers are larger and more complicated. However, just like walk-behind lawn mowers, the carburetor of a riding lawn mower is located near the engine.

So, once again, you will have to locate the filter housing and the fuel lines of your riding lawn mower to reach the carburetor.

To do this, we highly recommend that you use the manual that came along with the mower to avoid any issues.

If you cannot make any sense of the things mentioned in the manual, a quick search on Google or YouTube can find you an article or video that can help you through the process of locating the carburetor on your lawn mower.

If you are still in doubt or do not want to risk opening the lawn mower on your own, you can always hire a professional to look at your lawn mower.

Do I Need To Clean The Carburetor On My Lawn Mower?

Other than regular wear and tear, the carburetor of a lawn mower is also prone to damage from the lawn debris.

Therefore, the carburetor of the lawn mower needs to be kept clean and in good shape. It directly supports the mower engine in its function, and without it, the lawn mower will eventually stop working altogether.

In many cases, when the lawn mower is not working correctly, the issue is nothing more than a clogged or dirty carburetor.

And if you just clean the carburetor of your lawn in such instances, it will start working again. Below is a list of some issues that result as a result of dirty or clogged lawn mower carburetor:

• Engine stalling while you are mowing the grass.
• Black smoke is coming out of the lawn mower’s muffler.
• Difficulty in starting the lawn mower.
• The engine is running turbulently or sputtering during mowing.
• Fuel efficiency decreases over time.
• Mower starting with a jump or shutting down while mowing.
• Engine overheating during the mowing.

If you have any of the issues mentioned above, chances are it is due to a dirty or clogged carburetor. So, you will need to clean it and here is how you can do it:

How To Clean A Carburetor On A Lawn Mower?

The first thing you need to do while cleaning the carburetor of your mower is to remove it from the mower’s main body. And, Please note that the below-mentioned instructions are only meant to be used as a general guideline. Refer to your lawn mower’s manual for the exact process of removing and cleaning the carburetor.

Removing The Carburetor

• Before cleaning the carburetor, it must be entirely removed from the lawn mower.
• Remove the engine cover if it is required.
• Remove the air filter housing and then the filters.
• Turn off the gasoline if possible. If not, make a crimp in the gasoline line.
• Remove the fuel line from the carburetor and be prepared for some spilling.
• If gasoline falls on the mower, clean it with a rag.
• Disconnect the carburetor’s choke and throttle links.
• Remove the carburetor from the mounting nuts with a sliding motion.
• Release the carburetor bowl, if needed, by unthreading the screws.
• This will release the carburetor bowl.
• Finally, remove the float pin to release the fuel float inside the carburetor.

Once you have taken out the carburetor from the main body of your lawn mower, you can move towards cleaning it. Here’s how to do it:

Cleaning The Carburetor

• In order to completely take out the carburetor of your lawn mower, you will probably have to unscrew the nuts and bolts all around it.
• Once you have done that, you will need to remove the gaskets, diaphragm and the metering plate attached to the carburetor.
• To properly clean the carburetor, ensure that the carburetor intake and outlet ports are fully exposed. Then, use a carburetor cleaner spray to clean it thoroughly.
• If there is a carburetor bowl, make sure that you clean it as well.
• If there are any signs of rust on the carburetor, use sandpaper to clean the rust.
• Following that, allow the carburetor to dry in the open air.
• Once the carburetor is dry, put all the parts together and ensure that everything is in its proper place and you have not missed anything.
• Put the carburetor bowl in its place, if needed and use a sliding motion once again to reinstall the carburetor in its original place.
• Tighten up the bolts and nuts holding the carburetor in its place.
• Reattach fuel lines as well as carburetor throttle links and choke.
• Also, clean the air filter and its housing and reinstall it in its place.
• If there is an engine hood, place it back in its place and you are done. Congrats!

How Do You Fix A Lawn Mower Carburetor?

Sometimes the issue with a faulty lawn mower is not a dirty carburetor but a carburetor that needs to be fixed.

So, if your lawn mower is not working even after cleaning the carburetor, there is an issue with the carburetor or any other part of the engine.

If you are sure that the problem is with the carburetor, you have three options to fix it.

• The first option you have is to get a carburetor repair kit. These kits are readily available, and they are inexpensive. For example, you can easily find a mower carburetor repair kit for about 20 or 30 US dollars on amazon.
• If you think that the carburetor on your lawn mower is beyond repair, do not worry. Carburetor replacements are readily available online and in hardware stores. A typical carburetor replacement can cost anywhere between 50 and 100.
• If you do not want to go through the hassle of fixing the carburetor on your own, you can take it to a professional, and they can fix it for you. The cost will vary depending on the work done and labor cost in your area.

Conclusion | Lawn Mower Carburetor

A lawn mower is a necessary piece of equipment when it comes to lawn care. However, what most people do not understand is that you have to properly take care of your lawn mower to keep it going and increase its life.

And keeping the carburetor of your mower clean and in good shape is vital to lawn mower maintenance.

That is why you should at least clean the carburetor on your mower two to three times a year; however, depending on the use, you might need to clean it more often.

Frequently Asked Questions (FAQs)

How do I know if my lawn mower carburetor is bad?

If the lawn mower has trouble starting or starts with a jump, overheats or stops working during the mowing, releases black smoke or increases fuel consumption, there is a big chance that the carburetor on your mower needs to be cleaned or fixed.

Can you use wd40 to clean a carburetor on a mower?

Yes, you can if you do not have the carburetor cleaner spray. However, we highly recommend that you use a specific carburetor cleaner spray.

What causes a lawn mower to start and then die?

If you are facing a situation in which your lawn mower starts and then quickly dies, there is a high chance that its carburetor needs cleaning or some sort of repairs.

Where do you spray carburetor cleaner on a lawn mower?

You need to spray the carburetor cleaner right in the middle of the carburetor. We suggest that you do it in pulses which is a much more effective approach to removing the debris.

How often should a carburetor be cleaned?

In general, you should at least clean the carburetor of your lawn mower at least two to three times a year. However, depending on the use, this frequency might need to increase.

How To Use Carburetor Cleaner On A Lawnmower

Owning a lawn mower means maintenance, as it can make all the difference when it comes to your lawn care. It’s a household essential for many, but it also requires its own attention to ensure everything keeps up and running. One of the trickiest sticking points for new mower owners is carburetor cleaner. Chorbie is here to provide a complete, step-by-step guide on how to use carburetor cleaner on a lawnmower to make certain you stay up and running. Read how you’re able to promote safety and quality in your equipment while keeping a tidy lawn.

Getting Started

The first step in any maintenance project on your mower is to understand what exactly you are cleaning and protecting. Using your lawnmower regularly will lead to sludge and debris to build up around your carburetor overtime. The grime that accumulates can greatly affect the mower’s ability to keep the engine running. In fact, without the ability to mix fuel and oxygen in the combustion engine, it will completely stop working. Allowing the problem of buildup to go unmanaged can lead to many more issues besides. In short, however, if you fail to maintain your carburetor, you will be buying an expensive new mower quite soon.

Simple Steps For Lawn Mower Carburetor Cleaning

Carburetor cleaner remedies the issue of problem buildup around your carburetor, affecting smoothness while running the engine. You’ll also increase the lifespan of your mower by using carburetor cleaner regularly and following these steps:

• Grab a screwdriver and your preferred cleaner
• Start by turning the mower off and letting the engine cool completely
• Remove the air filter on the same side that you find the carburetor

Now that you’ve removed the filter and allowed the engine to cool, you can turn to reveal the grime and buildup in the carburetor.

• Take off the carburetor cover and linkage to expose the inside
• Wait for the inside to dry out, and then start the engine
• Spray into the center of the carburetor as it is running.

Cleaning the carburetor while it’s running is best because it allows the cleaner to penetrate and clean the throat of the carburetor, removing deposits in the lower sections. Now for the last few steps:

• Shut off the engine and continue spraying to get extra buildup removed
• Replace the cover, linkage, air filter, and screw everything back in place.

How Chorbie Can Help

Taking care of your mower is essential to save time and money as a homeowner by avoiding costly replacements and frustrating maintenance issues. A clean carburetor helps, and Chorbie is just the expert to assist you in getting this task done. We bring many years of experience to simple and complex tasks for homeowners, giving them peace of mind, greater outdoor enjoyment, and saving time and resources by eliminating complex chores. Contact one of our experts today to see how you can get started in the right direction with all your lawn care and landscaping needs

How to Use Lawn Mower Carburetor Cleaner

Wondering how to use lawn mower carburetor cleaner? You’re in the right place.

Give your mower the care it needs to help extend its useful life. We’ll show you the steps to take in our complete guide below.

The Quick Answer

If you’re in a hurry, the following steps are the basics you need to know to use lawn mower carburetor cleaner:

• Get your lawnmower ready
• Remove its air filter
• Access the carburetor’s interior
• Spray the cleaner
• Remove extra buildup
• Put the mower back together

It might seem intimidating if you’ve never done it before, but using a carburetor cleaner on your lawnmower is a relatively simple process. Keep reading for a complete walkthrough.

Using Lawn Mower Carburetor Cleaner

Let’s take a deeper dive into using lawn mower carburetor cleaner. But first, a carburetor often gets clogged over time.

It’s critical that you clean it from time to time to prevent it from creating sludge which it then puts into the engine. That said, only a few quick steps are standing between you and a cleaner machine.

Get Your Lawn Mower Ready

When getting ready to use a carburetor cleaner, the first thing you need to do is prepare your lawnmower. It’s easy.

All this it entails is ensuring the mower’s engine is off. If you operated the mower recently, you also have to wait for it to cool down. After making sure the engine is off and cool, you can safely perform the following steps.

Remove the Mower’s Air Filter

When the engine is cool, it’s time to remove the mower’s air filter. The air filter is usually toward the top of the engine and located within a plastic casing. Sometimes the case lid snaps into place, while on other models, you’ll need a screwdriver to remove it.

Dust off the area around the air filter before removing it. The air filter helps keep dust and dirt from getting into the engine. You don’t want to accidentally create more of a mess while trying to clean the carburetor.

Access the Carburetor’s Interior

With the air filter and its casing out of the way, you should be able to see the connections and links running from the carburetor to other parts of the engine. You need to disconnect and remove these connections to access the carburetor’s interior.

Make a careful note of where and how these connections were attached. You’ll have to reattach them when you finish cleaning the carburetor. If you’re not confident in your ability to remember where everything went, it can help to take a picture with your cellphone.

Spray the Cleaner

Now that you have access to the carburetor, you can clean it properly. To do so, you’re going to want to start the lawnmower engine. When the mower is operating, spray the carburetor cleaner directly into the center of the carburetor.

A high-quality commercial lawn mower carburetor cleaner works best for this step. It might seem counterintuitive, but spraying the cleaner while the engine runs allows it to penetrate deeply and remove more debris. Exercise care to avoid spraying other parts of the mower’s engine while you work.

Remove Extra Buildup

As you’ve been spraying the cleaner, dirt might fall and stick to the lower throttle of the carburetor. If you see debris, remove it. Ensure the cleaner is reaching the carburetor’s throat. With that done, you can again turn the mower off.

It should still be relatively cool because it hasn’t been running long, but exercise caution just in case. Keep spraying the carburetor to remove any extra buildup.

Put the Mower Back Together

All that remains is to put the mower back together. First, reattach and replace any connections you undid to access the carburetor’s internal parts. If you took a picture before disassembling the pieces, take a look at it now. Make sure the links are securely attached to the correct areas.

Now, you can replace the mower’s air filter. Take a moment to knock some of the dust and debris off the filter, then put it back where it was. Reattach the air filter’s casing cover by snapping it into place or putting in the necessary screw.

Things to Consider

When you follow the above steps, the result should be a clean carburetor. Other things to consider include:

• Has it been a few years since the last time you cleaned the carburetor? Typically, it’s best to clean it once every season. If it’s been a while, expect more dirt.
• Do you have the proper protective gear? Gloves will help keep you safer and clean while you work.
• Do you disconnect the spark plug? If you don’t, you’re at risk for an electric shock.

Keep these considerations in mind while you work.

Frequently Asked Questions

You might still have questions after reading about how to use lawn mower carburetor cleaner. Read further to discover answers to some of the more common inquiries.

Is the Cleaning Process Different for Riding and Push Lawn Mowers?

The carburetor cleaning process should be similar between riding and push mowers. The location of the carburetor itself will vary slightly but not considerably.

You might need assistance if you’re working on a riding lawn mower, as some models have a dead man’s switch built in to stop the engine if there isn’t enough weight in the seat.

How Can You Tell the Cleaning Helped?

If cleaning the carburetor helped, your lawnmower should start up much more smoothly than it did previously.

What if the Lawn Mower Still Isn’t Working Well After Cleaning?

Sometimes, cleaning a lawn mower’s carburetor won’t noticeably improve its performance. If you’re still having issues, it’s best to contact someone specializing in small engine repair. An expert can diagnose and solve more complex problems.

Should You Use Lawn Mower Carburetor Cleaner?

Using lawn mower carburetor cleaner isn’t difficult. With the proper precautions, you can do it safely and efficiently. Doing so is an important maintenance activity, and it will help keep your lawn mower functioning at its highest level.

If you found this guide useful, consider taking a moment to look at more of our how-to guides for homeowners.