Best Cabinet Table Saw – Top 5 Picks (Tested & Reviewed). Cabinet makers table saw

Best Cabinet Table Saw – Top 5 Picks (Tested Reviewed)

Looking for the best cabinet table saw for your next woodworking project? You’ve landed on the right page.

To help you choose a cabinet saw that suits you and your project requirements, we have reviewed five cabinet saws along with their features and how those features will help you in your project.

We managed to arrange some cabinet saws from our professional woodworking friends to test and review thoroughly. Additionally, we bought some cabinet saws and used them on small wood projects to see what they offer.

Best Cabinet Table Saws – Detailed Review

detailed review ↴

This is a 3-horsepower, 10-inch, and 13-amp cabinet saw with an upper part of cast iron and a base made of steel. After testing this cabinet table saw in detail, we confirm this one to be powerful, as it runs through almost everything you need to do.

This cabinet saw has a unique safety feature, protecting your hand or finger. If your finger touches the blade, it will stop the blade down.

The T-square of this cabinet saw is smooth working and easily adjustable (It was fun to use). Additionally, calibrating was also simple.

The 45-degree tilt of the blade is amazingly smooth, and we could comfortably use the blade up and down. The company claims that the dust collector collects 99% of the dust, but I think the claim is significant because some particles are always left. (But, still, it collects a considerable amount of dust)

We liked the 52-inch rip capacity because it will be smooth and excellent for working with plywood and crosscuts. The handles are standard; you will have to reach out to them as the table is significant in front of the actual space.

Additionally, it has an easy roll system which allows easy movement in the space, as it has wheels built. However, you won’t be able to rip anything under ¾-inch. Under the table, it has a switch that overrides the motor when it overheats.

In case you did not pull out any nail from the board while whipping, it has a bypass in which you can check. You can touch the blade to know if it’s conducting or not. (it has a sign which tells if it’s performing or not). The bowls and locks work smoothly!

However, as it is a sticker, the measuring tape comes off. Also, it has to be attached to the steel, which could be challenging to manage. Also, the trip piece comes off from the wood.

detailed review ↴

This is a rigid Biesemeyer-fence-made cabinet saw that provides an accurate fence system. This one is not used for any usual cabinet saw but for 3HP or greater saws. We tested it for the very reason of being a powerful 5HP.

This cabinet saw is 650 pounds (less vibration), 5 HP, and 52-inch Biesemeyer fence and is ideal for cabinet making, crosscutting, or panel ripping.

It is a 10-inch left tilt Unisaw blade size saw with a unique feature that makes changing blades easy and efficient. This push-button arbor lock needs only a wrench to work with. This is because of the larger blade opening.

According to some of the consumers we interviewed, it has a unique feature of fine-tuning blade bevel because of a bevel dial that eases it. It also provides accuracy within ¼-inch, providing more stability working in the area.

As it comes with a single cast trunnion system, there is no continuous vibration during operation, and it works as a vibration controller. You can easily adjust the blade height with dual front cranks

This 1-phase, 60 Hz motor is powerful and can handle demanding environments too.

detailed review ↴

The box has a cabinet table and cast iron parts, a low profile riving knife, a blade changing tool, and a plastic push stick (cheap). It also has a blade guard system, anti-kickback paws, and another riving knife.

The saw comes with accu-fence, which we liked a lot, as it is smooth and sliding and is excellent for stability. It has a miter gauge which can go up to 60 degrees either way, and a t-track bar (aluminum made), which allows easy adding of jigs.

It has a cabinet with a powerful machine of three-quarter horsepower, which can efficiently run on mere 115 volts; it was pretty convenient. This 330-pound saw works at 4200RPM speed.

The cabinets have cast iron wheels on their sides of 7-inch that also have handles: one is for adjusting blade height, and one is for adjusting blade angle. (smooth and easy rolling).

It has floating leaves which ensures to cover the blade (10-inch when you use it. Additionally, the blade is thin and curved, which cannot be used with any two-splitter, which the saw comes with, but you have to purchase the third one yourself.

Powermatic has a green light indicator which tells the saw is on when you pull the large button, but it needs a key to keep accidents ON/OFF happening. It also has a dust port on the back side which collects the dust from the shroud with the help of a hose connected to them.

The thing we liked is that this 1-3/4HP motor has a poly-belt which helps in reducing the vibrations and enhances efficiency. Due to this, it has only 80 decibels of sound level. This is an ideal saw for shop owners.

detailed review ↴

This is another Poly-V drive belt system cabinet table saw that works as a sound reduction: it is a quiet and efficient working table saw with a 10-inch table blade.

As we tested this cabinet saw by borrowing it from one of our friends, we did more research and to be honest, this is an amazing table saw with 3HP, which has about 50 inches of rip fence and provides high performance and a full range of high ends.

This is helpful in a manner that the T-square allows simple adjustments of screws and cursor

During our testing, we confirmed that this is an efficient operating saw as it comes with an integrated arbor lock, a real reason behind it (which also allows Rapid blade change). It also comes with a quick-release riving knife. Also, most users are satisfied as they consider it a robust cabinet saw in the market.

This large cast iron table measuring about 29 x 42 inches provides a lot of space and allows large projects to be done at it. Additionally, aligning the miter slot in the cast iron table is easy because of its convenient mounted all-steel cabinet.

The hand wheels of the saw are eight-inch in diameter, allowing easy adjustments in the height of the blade and bevels. As it is a left-lift machine, you can tilt away the blades from the fence. Additionally, it prevents the piece you are working on from getting trapped between the fence and the blades.

Additionally, this is a 3Hp motor working cabinet saw, which is rigidly mounted under the table mechanism.

It has a magnetic on/off switch to give protection from any power fluctuation or restarting after power cutoff/on. Lastly, it has an anti-kickback pawl with a riving knife and a high-tech modular blade to enhance efficiency.

The riving knife and dust shroud are mounted on the same cast-iron boss, allowing the consumer to blade through height and bevel changes to maintain effectiveness.

detailed review ↴

This is the last cabinet saw we would recommend using, as we researched it while testing. According to our testing, it’s best for shop owners. For additional information, we interviewed some woodworking professionals who use Shop Fox

After talking to them, we can conclude: that this one is a high-power 3HP motor-based cabinet saw capable of many tasks. It has a 50-inch rip capacity which can even rip the center of plywood (standard one).

The table has adjustable legs, a steel tubing frame, and a round top. This table is precision ground and polished cast iron table.

It comes with a quick-release riving knife, a blade guard, and splitters. The most special thing about it is its wide-span glide T-fence system which has a camlock and a phenolic face.

Another thing that is most liked is the T-slot miter gauge which also comes with a fence extension and flip stop, which means you can adjust it according to your project size. Additionally, it has a magnetic switch with overload protection, making it safer to use.

This left-tilted blade can run on AC voltage with a single phase and 12.8A.

The overall weight of the cabinet table is about 579 lbs with the dimensions of 82″ L x 45-1/2″ W x 40″ H, which is quite a quality and performing one. It comes with a 4′ dust port

Things to consider While Choosing the Best Cabinet Table Saw

Build Quality

The most important thing to notice is the quality of the saw table. Why? This is because a good quality table will allow stable and smooth working. It will not only give excellent results but will ensure little to no sound or vibrations coming front he saw while it is turned on.

Be careful when choosing a table saw just based upon price, as if you choose a lower quality saw table, there could be a lot of vibration from the saw that could negatively impact your working results.

Power

The motor’s power needs to be high enough, otherwise, it could overheat or damage itself. If you are going to do continuous sawing or sawing through thicker woods, then ensure that you choose a high-quality motor with high power.

We would personally recommend choosing a 3-5HP cabinet table saw!

Stability

The stability in the table saw for cabinets comes from the weight and the build quality. It’s worth it to pay more for higher build quality and a higher weight table, as the weight determines stability and stability provides smoother sawing and less chance of mistakes.

The table saws for cabinets discussed in this article are primarily above 400 to 600 pounds, which may seem heavy, they provide stability as well. At minimum, we would recommend at least 200 to 300 pounds for sarters.

Rip Capacity

The table saw rip capacity determines the maximum width of wood that it can cut. It is the maximum distance from the saw blade to the fence on the side of the saw’s table. The fence is an adjustable, verticle barrier to help secure a board or piece of wood in place on a table saw while you use the saw. While more commonly placed on the right side of the table, many table saws have a table fence that can be switched to the left side of the table as well, or removed entirely.

The most common rip capacities are 28, 30, and 50 inches. These are ‘half-width’ measurements, menaing if your table saw’s rip capacity is 28 inches, then you will be able to cut a board up to a maximum total of width of 56 inches.

Rip capcity also factors into the table saw’s price, as the larger the rip capacity, the higher the price.

For enthusiasts, 18 or 20 inches will be enough, while for professionals, the minimum rip capacity should be at least 24 or 28 inches.

Blade Teeth and Thickness

Besides the table saw blade diatmeter, the two key factors for choosing a blade are it’s number of teeth, usually labeled as ‘Xt’ and the blade teeth thickness, usually measured in fractional inches and labeled as “kerf”, which is designates a standard thicknesss.

A standard 10-inch diameter blade comes with 40 teeth (40t) and generally has a blade teeth thickness of 1/16” kerf (0.7 inches). But more teeth does not mean greater cutting ability, in fact, the opposite can be true, as more teeth require a more powerful motor to push through a piece of wood. The same goes for the blade teeth thickness.

Jobsite VS Cast Iron Table Saw

Most table saws for cabinets usually comes with a blade, but, sometimes, these can be ‘starter’ blades, useful only for an average piece of wood and a shorter lifespan before becoming dull. You can still use them, but we would recommend investing in a set of higher quality blades, especially made for the types and thicknesses of the wood.

Auto-Stop and Brake Systems

Choose a cabinet table saw that has an auto-stop or brake system. They typically work by employing a metal or aluminum brake into the spinning blade that can stop it 5 milliseconds and stopping power to the motor. Combined with electricity sensors (the human body is conductive) the newer auto-stop systems, such as SawStop, will stop and snap the blade away as soon as it detects electricity, such as from your fingers or another body party.

Price Consumer Reviews

Finally, we recommend to do your research before choosing and looking at the user ratings and Комментарии и мнения владельцев, both on Amazon and for your online hardware or home improvement store. These reviews are the most important because they help you know items that the manufacturers might never tell you.

Tips for Using a Cabinet Table Saw

Motor Power and Blade Thickness

Using blades with different thicknesses on a table saw also depends on the motor power and the thickness of the wood object.

A thicker blade requires a more powerful motor and thicker wood also requires a more powerful motor. Generally, we recommend only using thicker blades if your table saw motor can produce 3hp or greater.

Motor Cooldown is Important

Using your table saw continuously can cause the motor to overheat or even become damaged. Therefore, we recommend sawing, or ripping, one board at a time or maybe a few boards at a time, and then allow the motor to cooldown for a few minutes.

Placement

You need to position your cabinet table saw in a comfortable location in which you can work conveniently without being bothered by the surroundings or your workpiece being bothered,

Experience and safety

You need to be experienced enough to use this machine without getting injured. In this community, within minutes, many people get into accidents. So, work and practice on small projects to get a hold.

We would recommend using gloves and safety glasses while working. And never try to clear out the small pieces while running the saw.

Final Words

Hopefully, we have given you all the information you need to choose the best cabinet table saws. If not, make sure to re-read the buyer’s guide and start looking for models that come with the features that we listed.

We understand that buying a cabinet table is a big investment. So, take your time and do your research. If you want a good table saw then make sure to pick one of the saws we have listed here.

Other than that, we hope we helped you to make an easier decision, and hopefully, you learned something new today.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.

The 10 best table saws for every skill level, no matter your project

Email icon An envelope. It indicates the ability to send an email.

Email icon An envelope. It indicates the ability to send an email.

Email icon A stylized bird with an open mouth, tweeting.

Flipboard icon The letter “P” styled to look like a thumbtack pin.

Link icon An image of a chain link. It symobilizes a website link url.

• Best overall
• Best heavy-duty
• Best portable
• Best budget
• Best hybrid
• Best cordless
• Best jobsite
• Best mini
• Best for DIYers
• Best for contractors
• What to look for in table saws
• How we selected table saws
• Table saw FAQs

When you buy through our links, Insider may earn an affiliate commission. Learn more.

Whether you’re an occasional DIY-er or a professional craftsperson, a reliable table saw is an essential piece in your tool collection — just like a good cordless drill or sturdy ladder. The best table saw is one that’s both efficient and accurate. In short, it should allow you to rip and crosscut boards and sheets to your precise measurements in just a few seconds.

Table saws typically use a circular saw blade that rises from the bottom of the table, which remains stationary while you run your wood piece through it. This exposed blade makes these machines extremely dangerous, so you’ll want to look for safety features along with efficiency when choosing a table saw.

I’ve worked as both a residential and commercial carpenter. Our top 10 picks of the best table saws are based on my experience using a range of table saws, along with input from three experts: Nick Yahoodain, the owner of Advanced Builders and Contractors, Simon Dauphinee, a professional contractor and owner of Made By Hand, and Dan Aikins, carpenter and owner of Katy Roofing Co.

Our top picks for the best table saws

Best overall: DeWALT 10-Inch 15-Amp DWE7491RS Table Saw. See at AmazonThe DeWALT 15-Amp DWE7491RS combines portability and power in a rugged, easy-to-use package, and its extendable fence can fit large boards and sheets.

Best heavy-duty: SawStop Industrial Cabinet Saw. See at AmazonThe large size and impressive SawStop Industrial Cabinet Saw safety feature make this saw an ideal option for busy woodworkers, and the rugged construction ensures that it can withstand heavy use.

Best portable: DeWALT DWE7485 Compact Jobsite Table Saw. See at AmazonDespite its small size and benchtop design, the DeWALT DWE7485 still has many bells and whistles found on larger saws and, at 53 pounds, is light enough to transport.

Best budget: Worx WX572L BladeRunner Portable Table Saw. See at AmazonIf you don’t have the budget for higher-end options, the Worx WX572L BladeRunner could be a suitable substitute. It has a wide blade selection and small frame for easy transport.

Best hybrid: Shop Fox W1837 Open-Stand Hybrid Table Saw. See at AmazonIf you’re looking for a freestanding cabinet-style table saw but still want some maneuverability, the Shop Fox W1837, and its rolling castors could be exactly what you’re looking for.

Best cordless: Milwaukee M18 Fuel 18-Volt Table Saw Kit. See at Acme ToolsThe Milwaukee M18 Fuel 18-Volt Table Saw Kit is just as powerful as similar corded models, allowing you to perform a wide range of cuts from anywhere.

Best jobsite: SawStop 15 Amp 120-Volt 60 Hz Jobsite Saw. See at AmazonThanks to its blade-braking safety mechanism and 15-amp motor, the SawStop 15 Amp 120-Volt 60 Hz Jobsite Saw brings maximum safety and productivity to your jobsite.

Best mini: MicroLux Mini Tilt Arbor Table Saw. See at AmazonThe MicroLux Mini Tilt Arbor Table Saw packs the convenience and accuracy of a table saw into a tiny tabletop model, making this option great for hobbyists and crafters.

Best for DIYers: Grizzly Industrial 2 HP. See at AmazonThe Grizzly Industrial 2 HP combines the power and functionality of a contractor-grade table saw into a smaller, more manageable package.

Best for contractors: Skilsaw 10 Inch Heavy Duty Worm Drive Table Saw. See at AmazonThe extra large wheels and powerful motor of the Skilsaw 10 Inch Heavy Duty Worm Drive Table Saw strike the perfect balance between portability and performance.

Best overall: DeWALT 10-Inch 15-Amp DWE7491RS Table Saw

Pros: Includes push stick, integrated dust collection system

I’m a huge fan of this saw, which I used frequently during my time as a residential and commercial carpenter. Yahoodian and Aikins also love this DeWALT model, as it’s light enough to transport relatively easily but still heavy enough to provide the sturdy work surface you need when ripping even oversized boards.

Dauphinee says it’s been his go-to saw for years. “I have used equivalent models by Bosch, Hitachi, and Makita, and I think this table saw is by far the best,” Dauphinee says. The onboard storage features make the DeWALT 15-Amp DWE7491RS even more convenient, as it has specific compartments for storing the power cord, push stick, blade guard, wrenches, and miter gauge. I’ve found that when you have safety items like push sticks close at hand, instead of in a drawer somewhere, you’re much more likely to use them.

Even though the DeWALT DWE7491RS is relatively compact, you can adjust its fence to accommodate 32.5 inches to the right of the blade. A rack and pinion system makes it simple to manipulate the fence and lock it securely in place at your preferred measurement. You can even flip the fence to the opposite side. A collapsible frame makes it easy to store the DWE7491RS when not in use, and the wheeled base lets you roll it dolly-style around your shop. Dauphinee says the stand holds up well over time. “My current unit is still sturdy after hundreds of setups and breakdowns over the last 5 years I’ve owned it,” Dauphinee says.

Best heavy-duty: SawStop Industrial Cabinet Saw

Pros: Blade stops in contact with skin, comprehensive dust collection

Cons: Very expensive, may be too bulky for a smaller garage or shop

I’m a big fan of how the design of the SawStop Industrial Cabinet Saw prioritizes dust collection, which is especially important for larger saws that will likely handle large quantities of lumber. It advertises 99% dust collection, utilizing shrouding both above and below the table systems to ensure you’ll have as little cleanup as possible. However, the most important part of this saw is its SawStop safety feature. Yahoodian stresses the value of this feature, which stops the blade immediately — within five milliseconds — if it comes in contact with skin and then drops the blade below the table. This won’t totally prevent any injuries, but it will reduce the risk of a catastrophic injury.

The cast-iron table makes this saw rugged enough to stand up to frequent use in a busy workshop. Designed with maximum precision in mind, it ensures a flat surface within 0.01-inches. This construction adds to its hefty weight, so you’ll probably need an extra set of hands to help you out. Thanks to a foot pump that raises the saw onto four wheels, you can wheel it around your shop. This makes it a convenient option if you might need to move it out of the way quickly to get more space.

All these features add up, and the hefty price tag makes the SawStop best suited to those who will get a lot of use out of it. Dauphinee hasn’t used this saw specifically, but he did say it has a great price for a stationary shop table saw.

All these features add up, and the price makes the SawStop best suited to those who will get a lot of use out of it.

Best portable: DeWALT DWE7485 Compact Jobsite Table Saw

Pros: Sturdy construction, good value for the price

Cons: Does not have a wheeled base

If you plan on transporting your saw frequently or want the option to store it away when not using it, the DeWALT DWE7485 comes recommended by Dauphinee. He says it’s a great tool even though it’s smaller than our pick for best overall table saw. The DeWALT DWE7485 is powerful enough to rip through plywood, thanks to its 5800 RPM speed and 15-amp motor. Plus, it comes with a push stick, wrenches for blade changes, and a miter gauge.

Though it’s light enough for one person to carry, it’s still heavy enough to remain stable on your work surface. Its rubber feet help make it even more sturdy and can also prevent any dangerous sliding or slipping on your work surface. Its size also makes it convenient to store or put in your trunk. Thanks to its rack and pinion fence, you can expand its smaller surface area to fit 24.5 inches to the right of the fence. Its metal roll cage also acts as a handle, making it possible to carry the saw with one hand.

I always try to prioritize safety when making my tool choices, which is why I love the power-loss reset switch on this saw. This invaluable safety feature prevents the machine from automatically restarting if you temporarily lose power. Automatic restarts can be extremely dangerous, and I’ve had several close calls when working with older power tools that don’t have this mechanism. The transparent guard that fits over the blade also increases the safety of this tool and reduces the chances of potential injury.

Best budget: Worx WX572L BladeRunner Portable Table Saw

Pros: Blade replacement is much cheaper than circular saw models

Cons: Relatively short blade not ideal for thicker boards, not durable enough for everyday use

Even though this saw uses a jigsaw blade instead of a circular one, it can still perform the same cutting functions. It’s an affordable option if you need to make rip or cross-cuts. It can even make miter cuts from 0 to 60°. My favorite feature is its two mounting holes, one on either side, which allow you to bolt the saw down to your workbench. If you decide to keep it mobile, the rubber non-slip feet should provide a nice, sturdy foundation while you cut.

Best Cabinet Table Saw in 2022. Top 5 Cabinet Table Saws Review

The jigsaw blade is appropriate for projects like intricate woodworking cuts and scroll sawing. It comes with five different saw blades that you can switch out without a tool, unlike circular saw blades that usually require a wrench to remove or install. You can use the saw with aluminum, tile, and steel in addition to wood.

While the smaller blade and limited work surface mean this saw probably won’t work efficiently or quickly enough if you need to rip long boards, it will probably do the trick for smaller tasks. The blade also gives the Worx a small frame and weight, making it great if you struggle with heavier tools. Plus, despite its budget price, this saw still has a 1.25-inch dust collection port. You can connect a shop vac hose directly to the saw, minimizing the amount of sawdust you need to clean up afterward. Less dust increases visibility, which should lead to more accurate cuts.

Best hybrid: Shop Fox W1837 Open-Stand Hybrid Table Saw

Pros: Heavy-duty riving knife, four-inch dust port

Cons: Expensive, takes time to assemble

Hybrid table saws provide the stability and durability found on cabinet saws, but they tend to be more compact and easier to move around your workshop. The mobile base of the Shop Fox W1837 makes it fairly simple to move, making it a good option if you don’t have a lot of room in your shop. Just push down on the foot levers, and two castors lower to the ground. It’s also small enough to move around without too much effort.

The design of the transparent blade guard allows you to maintain a full view of the blade and the material you’re cutting. This guard increases overall cutting safety without sacrificing much in terms of visibility, and it also cuts down on flying wood chips and other debris.

The oversized on/off paddle switch of the Shop Fox W1837 will also come in handy for emergency shut-offs. Plus, anti-kickback pawls help make sure whatever you’re running through the blade only travels in one direction — in the event of kickback, they’ll slow down or stop the workpiece. This saw is also relatively compact for a cabinet model.

Best cordless: Milwaukee M18 Fuel 18-Volt Table Saw Kit

Pros: Comparable power output to corded saws, can lock it out with mobile app, includes Rapid charger, five-year warranty

Cons: Limited running time, very expensive

If you don’t want to rely on having outlet access at your jobsite or just don’t feel like hassling with an extension cord, the Milwaukee M18 Fuel 18-Volt cordless table saw could be just what you need. With the included 12 Ah battery, this saw — which has as much power as a 15 amp corded saw — can cut 600 feet per charge. The all-metal frame is rugged enough to handle tough jobsite environments, and the included stand allows you to set up practically anywhere.

It also offers bluetooth connectivity, a feature not typically found on power tools. When combined with a mobile app, this connectivity allows you to monitor the saw’s use, send an alert if it leaves the area, and even lock out the saw remotely. This safety feature could be extremely useful on jobsites that may have young children running around.

Of course, the limited runtime of a cordless tool may not be the most practical option for longer, all-day projects. But if you already have a Milwaukee M18 Fuel tool collection on hand, you could use those extra batteries to extend the runtime.

Best jobsite: SawStop 15 Amp 120-Volt 60 Hz Jobsite Saw Pro with Mobile Cart Assembly

Pros: Wheeled cart collapses for easy storage, multiple safety features

Cons: Expensive, relatively heavy

Safety is especially important on a busy jobsite, where other workers, extension cords, and other equipment can all increase the chances of injury. This jobsite saw combines the convenience of a portable saw with the invaluable safety benefit of SawStop’s blade-braking technology: The blade will immediately stop if it comes in contact with skin.

Additionally, the saw is designed for easy use, and you can raise and lower the blade with a single turn of the handwheel. Plus, thanks to the dust collection blade guard, you’ll always have a clean, unobstructed view of your workpiece. The wheeled stand allows you to quickly transport the saw around your jobsite and use it without access to a work surface. You can collapse the stand when not in use, and it tips forward so you can store the saw vertically.

Though the saw doesn’t come cheap, its safety features could help prevent an expensive emergency room visit and lost income — which may make it worth the investment.

Best mini: MicroLux Mini Tilt Arbor Table Saw

Pros: Variable speed blade, compact size, can use with plastic and metal

Cons: Not useful for large wood pieces, limited cut depth

The small work surface of the MicroLux Mini Tilt Arbor Table Saw isn’t practical for large projects, like those that might require a cabinet table saw. But it’s the perfect size for working with smaller pieces that require a more precise, focused touch. This saw weighs just 11 pounds and has a 1.5 x 14 inch footprint, which makes it extremely convenient to transport and store.

Despite the small size, the MicroLux comes with many of the bells and whistles found on full-size models. It features a tilting arbor for cuts up to 45 degrees, a table extension, and a variable-speed blade you can use to cut metal and plastic as well as wood. This functionality makes it a perfect tool if you work with craft projects that involve multiple material types. The included 80–tooth blade is also versatile enough that you can use it with lighter woods like balsa as well as traditional hardwoods up to an inch thick.

Best for DIYers: Grizzly Industrial 2 HP

Pros: Large dust port, removable start key for safety, quick-release blade guard

Cons: Somewhat expensive

The straightforward operation and high-quality construction of this Grizzly table saw make it a great choice for DIYers who want to dive into larger-scale woodworking projects. Plus, unlike the heavier duty, contractor-style table saws, it’s still light enough that you can move it around your workspace without much hassle.

A 2 HP motor makes this saw powerful enough to easily rip through sheets and create smooth, accurate dadoes. It also features a micro-adjustable fence system that allows for extremely precise cuts, and the fence’s T-shaped design can accept a variety of jigs and other useful accessories.

The 4-inch dust port also helps cut down on post-project cleanup — a real time-saver if your workshop contains other equipment you don’t want covered in sawdust. The Grizzly is also designed with durability in mind, and the cast iron table and trunnions ensure it can easily withstand the regular wear and tear of a typical workshop.

Best for contractors: Skilsaw 10 Inch Heavy Duty Worm Drive Table Saw

Pros: Powerful motor, can support 150 pounds, 16-inch wheels for easy transport

Cons: Heavy, bulky size may not be convenient for smaller areas

With a heavy-duty stand that doubles as a rolling cart, this Skil table saw provides the stability and mobility that contractors need to perform accurate cuts from anywhere. Thanks to 16-inch wheels, you’ll have no problem maneuvering the saw up and down stairs and over curbs, and the rubber feet help keep it from slipping or sliding around while you operate it. These huge wheels also allow you to push the entire unit into a truck bed without having to dismount the saw.

The powerful worm-drive power train provides an impressive amount of torque to help you perform even heavy-duty cutting tasks with ease. Plus, the rack and pinion design helps you easily make quick fence adjustments. Plus, the saw’s 3 ⅝-inch maximum cut depth prepares you for a wide range of cutting tasks. As a contractor, you’ll likely also appreciate the 2 ¼-inch dust port elbow, especially if you frequently work in finished or client-occupied spaces.

What to look for in table saws

Type: The best table saw for your needs will likely depend on your project as well as the space you have.

• Benchtop: The smallest type of table saw, these are designed to rest on top of a workbench.
• Contractor: These saws have a wheeled stand you can easily move around a jobsite. They’re larger than benchtop models but still compact enough to transport in a vehicle.
• Cabinet: These heavy, stationary table saws have powerful motors and a lot of table space. Thus, they require a significant amount of floor space.
• Hybrid: These saws look similar to cabinet models, but they’re typically smaller, lighter, and less powerful. Some have rolling casters that allow you to roll them around your workspace.

Motor: Table saws can have two different types of motors, direct drive or belt drive. Direct drive motors connect directly to the saw blade and are more efficient than belt-drive motors. They’re generally found on smaller, lighter saws like benchtop and contractor saws. Belt-drive motors use a V-belt to transfer energy from the motor to the blade, and their increased power makes them common in larger saws like cabinet and hybrid models.

Basic components: Although all table saws use roughly the same design, understanding their basic components can help you choose the best table saw for your project. The table and the blade of your table saw indicate the size of the workpiece you can cut effectively and the depth of the cuts you can make. Essentially, the larger the table, the more surface area you’ll have to support your workpiece, and the larger the blade, the thicker material you can cut. Most table saws use a 10-inch blade, while smaller models can use 8.25 inch blades. The number of teeth on the blade will also indicate the type of cut it’s best suited for, with more teeth meaning smoother cuts. Most table saws should feature a blade cover for safety and dust collection.

The rip fence, miter gauge, and bevel gauge allow you to accurately create a variety of cut types. The fence is a long moveable guide you can lock into place at precise distances from the blade, providing a stationary wall to set your workpiece against as you cut. A miter gauge allows you to create clean, accurate miter cuts — cuts angled across the width of a board — and a bevel gauge allows you to tilt the blade itself to a specific angle for bevel cuts.

Safety: As someone who’s seen the effects of table saw injuries firsthand, I’m always looking for additional safety features or design elements that reduce chances of injury during operation. The best table saws will include features like blade covers, automatic shut-off switches, a dedicated sawstop mechanism, and riving knives that reduce kickback injuries.

Power: The more power a table saw has, the easier job the motor will have cutting through your material. Thus, table saws with greater horsepower (HP) require less effort from you and result in a smoother, cleaner cut. While lower HP models (¾ to 1 ½ HP) are fine for lighter-duty tasks, you’ll want more power if you plan on using your saw for everyday use or need to work with dense wood. It’s worth noting that some saws will provide their power specs in amps instead of horsepower, which can make it challenging to compare different models.

Weight: Although all table saws are fairly heavy, some are lighter than others. When choosing the best table saw for your needs, you’ll want to check the weight to make sure you can move and transport it safely. If you’re purchasing a stationary cabinet saw, weight is less of an issue.

Rip capacity: Table saws are perfect for making rip cuts, and rip capacity indicates how far the fence can extend from the blade. This number will tell you the width of wood the saw can cut effectively. If you plan on cutting especially large items, like full plywood sheets, make sure to choose a saw with a rip capacity of at least 24 inches.

Size: It’s important to make sure your table saw will fit in your garage or workshop, so you’ll want to double-check its precise measurements before making your purchase. Even if you’re getting a smaller benchtop model, it’s still best to measure your work area first so you know it will fit. Taking a few extra minutes ahead of time can save you a big headache down the road.

Dust collection: Table saws can generate a lot of dust, and a good dust-collection system can help ensure your workspace stays clean and minimize cleanup time at the end of the day. Many of the best table saws feature a dust port you can connect to your shop vac or other dust-collection system. Just make sure the diameter of the dust port is compatible with your equipment.

How we selected the best table saws

As a residential and commercial carpenter, I’ve used a wide variety of table saws. That includes massive, standalone 10-foot models in a woodshop and portable versions that can travel to and from job sites. I kept this experience in mind when choosing the best table saws. I also also reached out to three experts to add even more professional insight.

Nick Yahoodain is the owner of Advanced Builders and Contractors, a professional home remodeling company in Los Angeles and has been in business for nearly 16 years. His expertise helped us better understand the different types of projects table saws are used for.

Simon Dauphinee, professional contractor and owner of Made By Hand, shared his experience with a wide range of table saw types and sizes and helped explain their specific features.

Dan Aikins is a carpenter and owner of Katy Roofing Co, a site connecting local customers to a local roofing pro. His professional background provided valuable insight into the types of table saw cuts and their effect on different materials.

Table saw FAQs

What is a table saw best for?

Table saws work best for performing “rip cuts” or long cuts along the grain of a wood piece. Their large platform keeps the wood supported as you work, which, when combined with the adjustable fence, allows you to make accurate cuts. They also do a great job making crosscuts (cuts across the grain), which covers a wide range of carpentry and woodworking projects.

What is a good table saw for beginners?

If you’ve never used a table saw before, you probably want to use a contractor saw. They provide the stability needed to maintain proper control while you work but don’t require the space or financial commitments of larger options. The best table saw for first-timers will also come with safety accessories like push sticks. Regardless of which saw you choose, it’s essential to keep in mind that all table saws are extremely dangerous machines. It’s always a good idea to consult someone with experience to walk you through the basics instead of diving right in on your own.

How many teeth are best for a table saw blade?

According to Dauphinee, the ideal TPI (teeth per inch) of a saw blade really depends on the application. “If you’re working with finished sheet goods, then the more teeth per blade the better. However, if you’re on site and need to rip framing lumber, fewer teeth are best.” he says. If you try to rip rough lumber with a high TPI blade, you’ll either stress the saw’s motor, burn the wood, or dull the blade, Dauphinee says. Aikins says that for a 10-inch blade, 40T or fewer works best for general purpose rough cuts, while 50T-60T “combination” blades make good middle-of-the-road blades for a broad range of cutting, and 80T or higher work best for cross-cutting hardwoods and sheet goods like plywood and melamine.

What saw blade makes the smoothest cut?

Generally speaking, a higher TPI blade will produce smoother cuts, although Dauphinee says that the material you’re cutting is also a factor. “A high TPI blade for plywood, when used on melamine, won’t produce the same results as a high TPI blade designed for that material,” he says.

How long should a table saw blade last?

The lifespan of a table saw blade depends on several factors, including how much you use it, the type of material you cut with it, and how well you maintain it, according to Aikins. He says that in a home garage or workshop, a blade should last at least one to two years before you need to sharpen or replace it.

What should you never cut on a table saw?

Table saws are primarily used for wood products, and while you can use them to cut metal with an appropriate blade, Aikins says that they’re not meant for brittle materials like stone, tile, or glass. Dauphinee says you should never cut cement boards, since they produce dust that’s both highly detrimental to the saw’s interior components and a pain to clean up.

How do you safely use a table saw?

A table saw’s design makes it one of the more dangerous woodworking machines you can use, and you’ll always want to treat the exposed blade with the utmost respect. Take care to pay attention to your surroundings, since slips and falls while cutting are a common cause of table saw injuries. Make sure to research push blocks and push sticks, as these safety tools can help keep your fingers away from the blade as you push wood through the saw. For added safety, also consider saws with auto-shutoff features that turn the tool off in the event of a power outage. If you’ve never used a table saw before, you may want to start by having an experienced friend walk you through best practices or watching tutorial videos on YouTube.

The 10 Best Table Saws for Woodworking 2023

A table saw is one of the most essential tools for woodworking and carpentry. Although it has many uses, its primary use is for ripping through sheet goods like plywood, MDF, OSB, and more. That’s why you’ll always find one or more with furniture makers, cabinet makers and home remodelers who make use of these materials for their projects.

If you’re trying to get a table saw today, you’ll find out that there are many options available to choose from. They range from simple mini units, portable / job site units to much more complex ones like hybrid, contractor and cabinet table saws.

Today, there are even cordless units that make use of battery power. Something that hasn’t always been available back in the day. Instead of plugging these into a power outlet, you have to plug in a battery, and off you go, ripping boards with it.

That means you can use these even in remote job sites without access to electric power or generators.

With the variety however, comes the difficulty in making the right choice. Which one is the best for your project? Which type of table saw should you choose?

Note: This post may contain affiliate links. If you make a purchase through these links, we may earn a commission at no additional cost to you.

After testing several units from different brands, we’ve selected 10 of the best and compiled a comprehensive list and review to help you choose.

What To Consider When Buying A Table Saw

Blade size / Cutting depth

Blade size is critical when choosing a table saw because it will determine how far into the material you can cut or the cutting depth.The blade size of table saws ranges from 7 inches to 12 inches. The most common blade sizes, though, are 10 and 12 inches.With a 10-inch blade, you have a maximum cutting depth of 3.5 inches; with a 12-inch blade, you can cut materials as thick as 4 inches.

A Good Straight Fence

The fence is one of the most crucial parts of the saw because the accuracy or positioning of the fence determines how accurate your cuts will be.Different fences come with table saws, such as rack and pinion sliding fence, T-square fence, and the classic fence as found in Grizzly and Shopfox saws.The fence that come with the one you choose should be easy to adjust to be parallel with the blade, in case it’s not parallel right out of the box.It should also be strong enough to stay in position once locked in place. So, make your choice carefully and ensure the model or type you choose come with the right fence.

Rip Capacity

Rip capacity is another important consideration when buying a table saw. This is the distance from the saw blade to the maximum extension of the fence.This determines how wide a material you can rip or cut with your saw. It also determines the type of projects you can handle with it.Rip capacity for table saws ranges from as small as 18 inches for portable models to as high as 60 for cabinet and sliding models.If you want to work with wide sheet goods, go for a higher rip capacity. On the other hand, you can go for 18, 24, and 32-inch rip capacities if you’re not working with very large sheet goods.

Power

Table saws make use of electric motors, which supply rotational force to the blades for cutting the materials you want to cut.These motors come in different sizes and have different power ratings in horsepowers. You can find saws with motors rated from 3/4 horsepower, one horsepower, 1.5, 2 to 5 horsepower, and above.How does this affect your choice? The higher the power ratings, the thicker the boards and harder the materials you can cut with it.With 3/4, 1.5, and 2 horsepower motors, you can cut lightly dense and thick materials up to 5/8 inches and maybe a little bit more than that.Going for machines with higher horsepower motors will surely be your best bet if you want to cut denser materials and use wider blades like 12-inch blades.

Size

Table saws come in different sizes, from small mini table saws to very big sliding types. This size is going to determine the type you go for.The size of your shop is also going to determine the size of the machine you can accommodate. Going for a small portable machine will be the right thing to do if you have a very small garage.On the other hand, if you have a vast dedicated workshop and can afford a cabinet or sliding model, you can go for it.

Dust Collection

If you’re working outdoors, dust collection might not be a priority, but if you’re working indoors in a workshop, it is very important.That’s why you need to ensure that the table saw you choose comes equipped with a suitable dust port you can hook to your shop vac.You should take note of that because some portable benchtop models don’t come with dust collection ports. Using something like that indoors will surely cause a huge mess and make your shop uncomfortable to work in.

Safety Features

Safety is very important when dealing with these types of machines. Ensure you choose table saws with essential safety features so you can operate the machine in peace.The stop switch should be conveniently located so you can quickly turn off the machine whenever you want or in case of an emergency. It would be best if you were not looking for it.It should come with blade guards, preferably transparent ones, so you can see the blade position as you work.

DeWALT Flexvolt DCS7485T1 Portable Jobsite Table Saw

DeWALT’s Flexvolt technology is no longer new, but it’s the type of tech that made this saw possible. The Flexvolt battery can change between different voltages, powering 60 volts and 20 volts max tools, depending on the type of tool you plug it on.This DeWALT DCS7485T1 is a 60 volts portable table saw. This model comes with a battery and charger, so you can easily power it up and get to work as soon as possible.The DCS7485T1 allows you to use the saw at any given condition. You get a battery-powered tool and the peace of mind that you can always switch to corded whenever you want.If you’re on a remote job site, this is the kind of tool you bring. It’s portable, and it’s battery-powered. On the other hand, if you’re in your workshop, you can always plug it directly into an outlet.Most DeWALT table saws use a rack and pinion fence, and this one’s no different. It uses a rack and pinion telescoping fence, which is relatively easy to use and adjust as needed. It’s also very accurate right out of the box.The DeWALT DCS7485T1 comes equipped with an 8-1/4 inch blade. This is not the largest of blades, but it’s ideal for DIY and job site rip cuts.Although small, it has a 24-inch rip capacity, which means you can rip down sheet goods like MDF and similar types of boards with great accuracy.One of the best things about it is that it’s quiet compared to other portable table saws and even circular saws I’ve owned.Setup is also straightforward and easy to carry out.

• It’s very portable.
• It’s quiet compared to similar saws of same size and range.
• Budget friendly.
• Flexible. You can use it with battery and also plug it into a power outlet.
• It’s easy to setup.

Where it can be improved

Skil TS6307-00 10 Inch Portable Jobsite Table Saw

Jobsite table saws range from a few hundred bucks close to a thousand. If you need one that performs really well, but your budget is pretty tight, then this Skil TS6307-00 might just be what you need.

It features everything you need to tackle projects of various sizes on the jobsite like quickly ripping large boards, and making consistent repeat cuts.

The fence it comes with is a rack and pinion fence which is pretty easy to adjust when making cuts. It’s fast and smooth.

Adjusting the blade to be parallel to the fence is also pretty straight forward. In fact, you can make micro-adjustments to ensure the cut is as accurate as possible.

Supplying the power is a 15 am motor with a no load speed of 4600 RPM, allowing you to cut through different types of wood, both hardwood and softwood with ease.

The Skil TS6307-00 jobsite table saw makes use of a 10 inch blade which allows a 3.5 inch maximum depth of cut and a 2.5 inch max cutting depth when beveled at 45 degrees.

As for rip capacity, it’s 25.5 inches to the right of the blade and 14 inches to the left of the blade.

It also accepts dado blades with a maximum width of 5/8 inches, allowing you to cut sluts or make dados on your material.

• For the price, it’s one of the best.
• Very accurate.
• Easy to adjust blade to be square with the fence or vice versa.
• For its size, it’s also very powerful. Cuts through different types of wood with ease.
• Build quality is good.

Where it can be improved

Bosch 4100XC-10 Gravity Rise Jobsite Table Saw

Apart from the other bells and whistles that makes the Bosch 4100XC-10 one of the best jobsite table saws out there, the easy to use gravity rise stand that comes with it is one special accessory that draws pro consumers to it.

The gravity rise stand is very easy to use. Setup requires just one step, and overall, it makes the table saw very portable with a wheel that makes moving it on the jobsite very simple.

Equipped with a 15 Amp 4.0 HP motor, producing a max speed of 3,650 RPM, the Bosch 4100XC-10 is capable of cutting through any wood stock you throw at it.

The 30 inch by 22.5 inch cast aluminum table top provides ample work surface to cut large boards with ease.

It features a solid and smooth gliding SquareLock rip fence that provides a 30-inch rip capacity on the table. The fence is very accurate and easy to use right out of the box.

A very good feature of the Bosch 4100XC-10 table saw is that it maintains the same speed under load. This ensures it cuts through materials easily without any hiccups. It also helps the blade stay true and accurate all the time.

Bosch includes safety features like a riving knife, anti-kickback paws and a transparent blade guide to ensure maximum safety duty operation.

• It includes a gravity rise stand which makes it very portable.
• Power is not lacking.
• The Squarelock fence is easy to use and accurate right out of the box.
• Maintains constant speed through cuts.

Where it can be improved

Wen 3720

The Wen 3720 got table extensions in either directions of the saw. Which is a really useful feature that creates a lot of support for the board you’re ripping and creates a lot of working space for you.

It’s got a good adjustable fence that rolls easily along the table. It’s easy to adjust and make cuts with it.

The Wen 3720 accepts a dado stack in case you fancy using your table saw to cut grooves for making joinery.

It comes with all the necessary table saw accessories, such as the blade, a tool free blade guard system, fence, a rolling collapsible table saw stand with wheels, miter gauge, push stick and a set of wrenches for making adjustments.

• Dual extension wings provides large material support.
• Fence stays aligned after adjustment.
• Very accurate.
• Comes with a stand, making it very portable.

Where it can be improved

Milwaukee 2736-21HD 8-1/4 Inch Portable Table Saw

As a professional contractor, general carpenter or home remodeler, you need a table saw that’s portable and convenient to use with or without access to electricity.

That is exactly what this Milwaukee 2736-21HD M18 FUEL powered table saw is designed for – jobsite applications. Just like any other cordless tool, you can’t beat the convenience of using a saw like this on the jobsite.

Apart from being convenient to use, it’s also very powerful. It comes equipped with Milwaukee’s POWERSTATE brushless motor that produces up to 6300 RPM of speed and higher even under load. This thing will cut through any wood you throw at it with ease. Pine, oak, maple, you name it. It cuts through them like a hot knife through butter.

Next is the battery. The M18 FUEL battery that comes with it can last throughout the day. It doesn’t run down easily and it charges quickly.

The Milwaukee 2736-21HD table saw comes with an 8-1/4 inch blade, and has a 24-1/2 inch rip capacity for cutting sheet goods. It can rip through 4×8 sheets of OSB or plywood with ease.

It comes with a rack and pinion fence system that’s fairly easy to adjust, with a dialed in scale to read and make fine adjustments before making a cut. The fence is a bit flimsy, but for a saw this size, it works pretty great.

The build quality is good. It has an all-metal frame which makes it very sturdy and capable of withstanding tough jobsite conditions.

It comes with a riving knife, a miter gauge, a push stick, and there’s onboard storage so you don’t misplace these accessories.

All in all, I’d say the Milwaukee 2736-21HD is the ideal table saw for you if you’re a pro carpenter, a contractor or woodworker in need of a very portable and convenient saw for jobsite projects. It’s very powerful, cuts through anything, and the battery does not disappoint.

• The battery lasts a whole day and charges quickly.
• It’s very compact. Very good for jobsite projects.
• Although it’s compact, it doesn’t lack in power. It will cut through any wood you throw at it.
• The build quality is good.

Where it can be improved

The Best Table Saw for the Everyday Handyman

DIYers, hobbyists, and pros are continually searching for the best and most reliable table saw to help master any woodworking projects that come their way, making them less tedious and more rewarding. We at Woodsmith Reviews are here to help guide your search for the highest-rated table saws of 2023. You should know that a table saw is known for delivering precise and clean cuts that no circular saw can offer. With such powerful tools, you will be able to make both ripped and angled cuts. As you’re scrolling through our picks, you’ll also be able to read through our buying guide about the features and key considerations to make when you’re looking to buy a new table saw. Keep reading to find the best table saws!

TL;DR We cut a lot of wood, so you can cut time off your search for the perfect table saw.

Finding a High-Quality Table Saw: A Buyer’s Guide

The importance of a table saw to the success of any woodworking project cannot be emphasized enough. A table saw, which is powered with the help of an electric motor, is a powerful tool that protrudes through the top of a specially designed table. This section will be termed the buying guide, and here we will be looking at all essentials worth knowing and considering in your search for your new table saw.

What Are the Different Types of Table Saws?

Table saws are categorized based on their design, power requirements, and capabilities. Here we will be dividing the different types into two main categories: Portable table saws and Stationary table saws.

Portable table saw

As the name suggests, these table saws are portable power tools. Portable saws are constructed using lightweight materials, and they are mostly powered using 15amp, 120 volts motors.

Now, let’s take a look at the different types.

Bench table saw

Bench table saws, or benchtop table saws, are compact and many times used by DIYers, beginners, and hobbyists.

These types of table saws do not take much space as they are designed to be fitted in a home garage or workshop. They are also light as they are made of lightweight weight materials. Among all this, the most distinguishing feature of this table saw is that it is usually mounted and often bolted to the workbench.

In addition to this, bench table saws are perfect for cutting materials like plywood, softwood, and plastic. When shopping online for table saws it is easy to confuse them with full-size table saws, to prevent this from happening, we advise you to always check their inch rip capacity, which is usually around 18 inches for a bench table saw.

Jobsite table saw

Jobsite table saws are common with contractors, and for this reason, can also be called contractor table saws. Like the bench table saw, these are also portable but are far more durable and power-efficient. Jobsite table saws can deliver more precise and deeper cuts than their bench counterparts.

Additionally, they feature foldable stands or legs and even wheels that make moving them around the workshop or job site easy.

Stationary table saw

Stationary table saws pack more robust accessories; they are bigger than portable table saws and are generally more suited for detailed professional cuts and jobs.

In addition to this, saws in this category have tables measuring 27 x 20 inches. It also makes sense to notify you that they are driven and powered by Belt drive motors.

Here are the two popular types of stationary table saws.

Hybrid table saw

From the name, you should know that this table saw is a combination of two different types. In this case, we have a combination of the cabinet table saw and the portable table saw.

Knowing this, it’s safe to say that hybrid table saws are a combination of the advantages of job site table saws and cabinet saws into one durable tool. These table saws are designed to look and function like cabinet table saws, but they weigh less.

Cabinet table saw

Cabinet table saws are very popular, and the reason for this is due to the amount of power they pack and their ability to cut through the thickest wood logs.

Table saws in this category are powered by 220-volt motors. These table saws are used in professional jobs. They also have their motor enclosed in the cabinet, which is below the surface of the extendable cast iron table. The length of the cabinet saw table here is more than enough to support large workpieces.

Besides the ones discussed above, you can use the sliding table saws to cut large panels like plywood or MDF.

Power rating

The power rating is crucial when selecting a table saw for any job. This power rating is an indication of horsepower and voltage rating.

For light woodworking jobs like shelving and cutting 5/8-inch-thick sheets, ¾HP – 1.5HP will do the job, but when it comes to cutting 2 inches-thick sheets, you will need 1-2 HP table saws. With that said, table saws in this category pack a 120V motor and draw an 18-24amps current.

Lastly, we have saw tables for heavy-duty jobs; we are talking about saws with the ability to cut wood that is more than 3 inches thick like Brazilian wood and ironwood. These saws run on 240V motors.

The drive system

One critical feature that will also affect the amount of power available to the table saw and its torque is the table saw’s drive system. There are two main types of drive systems: direct drive and belt drive.

Direct drive systems are popular with a portable table saw; here, the blade is connected to the motor directly. As a result of this, they will not produce as much power as the belt drive system. However, they have the advantage of being very quiet, requiring less maintenance, being portable, and ensuring efficient power utilization.

On the other hand, belt drives are popular with larger and more powerful saws. They produce more torque and are better when it comes to cutting thicker hardwood.

Fence and miter gauge

The fence is an adjustable component featured in every table saw, this component helps guide and hold the workpiece during the cutting operation. On the other hand, the miter gauge is a table saw-embedded device whose duty is to guide the miter slot in the aw.

With a miter gauge, making compound cuts will be easy, you only need to set the miter gauge of the saw at the angle and bevel you want.

It is also crucial that you know that there are different types of fences used by various manufacturers, of which the T-square fence, also known as the “Biesenmeyer Commercial fence” is the most popular. This fence is easy to operate and adjust.

Many of the other types of fences are specialty fences that are designed to the customers’ needs. Some feature magnifiers for better vision when changing the fence, and some are extendable; this means they can be folded depending on the size of the wood.

Inch rip capacity

When we say inch rip capacity, we refer to the distance between the saw blade and the fence. It is vital you first determine the correct width of the material or materials you will be working with when choosing a table saw. The broader the inch rip capacity, the better the saw will be at accepting and ripping wide wooden boards.

Safety

Safety is just as important as every of the other factor and features discussed in this section. We always advise prospective table saw buyers to make sure the saw passes a safety test.

Remember, these blades are rotating at 3-4 thousand RPM, and any mistake can cost you a body part or your life.

In all, look out for most table saws with blade guards and anti-kickback pawls, these will be particularly helpful in safeguarding those using belt-driven table saws. Founder of WoodWorking Clarity, Goodell David, says, “There is no amount of precaution that can protect you from freak accidents, so it’s great when your saw looks out for you.” Push sticks, riving knives, sensors, and magnetic switches are also essential safety devices that will not only protect you but protect your tool life in the long run.

Other important features to consider when choosing the best table saws include the cutting depth, the size of the blade, and the addition of a dust collection system.

Check the video from The Old House for some tips on using most table saws safely.