DIY backpack belt for motorcycles. How to put a shoulder belt for a trimmer for grass

A belt for a trimmer for grass from China. characteristic and design of the product, price, video

Working a trimmer is much more convenient and easier to use a special belt. Thanks to him, the operator can mow large sections of grass without pain in joints and muscles for several hours in a row. The design of the biceps belt is designed so that the lawn mower is kept using the mounts itself. without the help of hands. She will only need to set the direction, and she will do everything else herself. About how to correctly attach a belt to a trimmer and set it up for yourself to facilitate the load, and it will be discussed in this material.

The exploitation of braids for grass is quite complicated without a number of additional accessories, including the cutting headset, as well as a shoulder belt and a casing that protects the operator’s legs from stones and herbs. Each of these devices plays an important role in the configuration of a trimmer for grass, so special attention should be paid to the study of their characteristics and choice.

Classification of the headset for trimming

Owners of local areas often use different knives and discs to care for the territory. Their main function. fight large weeds and old dried bushes. In most cases, manufacturers use the following materials for the manufacture of knives:

The knives of the trimmer for grass also differ in the type of cutting edges. The headset can have 4.8 or more teeth that are at the same height or one above the other. In addition, the blades have a carbide.melting tip or with holes inside the teeth.

The cutting set can also be made in the form of several blades or to have the shape of a solid disk to which strong metal teeth are attached.

The choice of a knife depending on the conditions of use

When choosing a cutting headset, you should pay attention to the material from which it is made. As a rule, metal gadgets are used to combat especially large weeds. However, plastic knives can handle most wild plants. In addition, the plastic has much less weight and greater elasticity, and the blades and discs of the trimmer for the grass create a lower load on the engine and the drive tool.

The lawn mower will not start or start, but stalls. What is the reason?

To understand this, you need to know the principle of operation of the unit as a whole. It happens so, just purchased, a new saw is not started, and running around the service centers begins, in such cases it is recommended:

Carefully read the instruction manual; In detail to study the method of first factory and run.mowing; Try to understand the principle of the product; How to pump gasoline and so on.

The quality of gasoline is poor; improper proportion of gasoline and oil; clogging of the filter of thin cleaning; The spark disappeared.

The lawn mower is not started after winter

In such cases, it is necessary to conduct maintenance of the unit. Remove the fuel system, including filters (air, fuel), disassemble the carburetor, clean each node, rinse. Pour the filters with air

Pay attention to the quality and octane fuel number

One more fact must be taken into account that with the long storage of diluted fuel mixture, it falls working qualities, which also leads to the consequences in which the lawn mower will not start. Therefore, it should be diluted with portions, that is, the amount of a mixture that is produced at a time. The operating instructions clearly describe and are given clarifications on the proportion of mixing gasoline and oil. Straighten compliance with the correct proportions will at least save you from several questions, why the lawn mower will not start and what to do in such cases.

The lawn mower is not started on a cold

When starting a cold motor, it is not recommended to press the gas. Having tilted the lawn mower so that the air filter is on top, click on the fuel suction button 5-6 times, install the function of switching functions to the Start position, pull the starter’s cord several times until the motor starts up. After a few seconds of the engine, turn off the start system.

The lawn mower is not started on hot

If the lawn mower was recently at work and did not have time to cool down but did not want to start. press the gas trigger, sharply pull the starter’s cord several times until the engine is started and only then the gas trigger is released. If a lot of time has passed and the lawn mower managed to cool, then it must be started as with cold. If the above methods did not help, the lawn mower did not start, then you should contact the service center.

  • Blog
  • About the service center
  • Served brands
  • Diagnostics and repair prices
  • Delivery
  • Spare parts
  • Contacts

Repair and service of garden equipment.

Specialized service-comprehensive warranty and post-warranty maintenance of garden and communal equipment of world manufacturers! We sell spare parts with delivery throughout the trimmer for grass. How to adjust the ranks of a trimmer for grass

Adjust the height of the hook of the smynet belt of the trimmer for the grass with a handle of the shoulder straps so that the trimmer knocked down to the ground is placed parallel to the surface of the site (strictly horizontally). When working with a saw trimmer for the grass, adjust the height of the hook (with a tightening of the shoulder belts) so that the sawy disk of the trimmer for the grass is tilted little forward relative to the surface of the earth.

Moving the ear for hanging braids for grass on a trimmer belt for grass or back, equalize a trimmer for the grass so that when the steering wheel is released, the knife of the trimmer for the grass is near the very surface of the site, but does not go to the grass. For sawing bushes and young trees, a trimmer for the grass with a saw drive of a bureau for the grass must be equalized so that when the steering wheel is released, the car hung on the hook horizontally land. Attach.

Adjust the shoulder belts of a trimmer for grass (braids of the harness) so that the load is distributed moderately on the shoulders (check by pressing the handle hook of the trimmer for the grass).

Route about the parameter belt of the Husqvarna grass. On the design features of the belt suspension (harness), which simplify and make the mowing with a motorcycle, a trimmer, a benzocosa, a Husqvarna bumpy. wide shoulder straps and an elastic belt, rapidly unfastening locks (carabiners) in the event of a fire or at least any other situation requiring a briskly. exemption from a trimmer for grass. On the universality of belts for guys and ladies.

Such Range belts of a trimmer for grass from Husqvarna (Balance 35/55, Balance X, Balance XT) can be used on all trimmers, benzocoses, motorcycles, electric cosecs, and bureaus.

The automatic parking barrier outside is very similar to a mechanical parking barrier. But the difference, certainly, is. Control of automatic parking barriers is executed using a remote control or button.

Passive but energy.efficient window (principles of calculation)

The window is a weak place in the shell of the structure, since the heat transfer resistance in any case is less than that of other enclosing structures. The task of a passive house is to reduce, as it could be, heat loss. Accordingly, the warmest house is used in a passive house.

People who have long lived in the Land of the Rising Sun say that before buying or renting a dwelling, the Japanese will usually come to the room with the device and determine the intensity of all probable radiation, including even electric.

We make a kosher anvil from a piece of rail

Store bite and have to think: how to make an anvil with your own hands.

It should be noted that the anvil is subjected to huge shock loads and the effects of the highest temperature. Therefore, she must own.

We translate the battery of the NI-CAD AKB in LI-Ion batteries

I will immediately say that your native power supply is left as a charger and for new batteries. But the old batteries that you had in your battery drill can safely dispose of. because.

Assembly of a cultivator

If there is a cottage or just a land plot, then the cultivator will help facilitate soil processing. Traditionally, a chopper is used for these purposes, but working with it takes a lot of time and effort. The use of the cultivator will reduce labor costs, and the whole process will take a smaller time period. Factory.made equipment is expensive, therefore, with limited funds, the question arises about the independent assembly of the cultivator. For this, both gasoline trimmers for grass and electric cos are suitable for this.

To create a simple sample of technology, you should stock up on such tools and materials:

  • corner grinder with a set of disks (suitable diameter. 125 mm) for metal;
  • drill with drills of various diameters;
  • welding apparatus;
  • electrodes;
  • an electrician or a hacksaw for metal;
  • An emery machine with two abrasive circles of different granularity;
  • functioning gasoline trimmer;
  • forks;
  • pipe made of steel suitable in diameter for the shaft of motorcycles;
  • manual tools: keys, hammer, pliers, core, roulette and marker;
  • a sheet of metal with a thickness of 3 to 5 mm and a minimum of 1010 cm.

The manufacturing process begins with the working part. For this purpose, the curved rods of garden foriles will serve. Their recommended length is from 10 to 15 cm. this is enough to carry out loosening the soil.

The working nozzle is made in the following sequence:

  • The teeth of the forks are flattened to a width of 1 cm;
  • on the sandpaper, using a circle with a small abrasive, cutting cutters;
  • Using an electrician, a circle with a diameter of 10 cm is cut out of the metal;
  • process it on the emery machine until it reaches an almost perfect form;
  • At equal intervals, prepared mills are welded to the metal circle (recommended quantity. 3).

With more than 3 pieces, the number of mills, the load on the equipment increases greatly.

The recommended power of the gasoline engine should be two horsepower (about 1.5 kW) or more.

At the next stage, it is necessary to attach the cutter for weeding for a trimmer for grass. The process is greatly simplified in the presence of a reverse thread located at the end of the shaft of the motorcycles, on which the manufactured working part is simply wound. To do this, a pipe with a nut is pre.welded to the cutter.

In the presence of locksmith experience and welder skills, redoing a trimmer for grass in a cultivator is quite simple. Financial costs at the same time insignificant. If the work is used in an electric hood, then you will need to think about the extension cord so that it takes out throughout the processed area.

How to use a trimmer correctly

Garden trimmers for grass are effective. Newchers think that it is easy to work with a lawn mower, because you just need to include it in a socket or pour fuel, but this is not entirely like that.

The efficiency of the garden tool and its service life directly depend on operating conditions. Therefore, before using a trimmer for grass, you need to perform preparatory work.

The lawn with which you need to mow the grass is carefully examined. Be sure to remove glass and large stones. Having flew out from under a working mower, they can injure a person. They remove the wire from the lawn, because it can be wound on a rotating element, break a mower.

After that they move to the installation of the cutting system. There are trimmers for low.power grass on sale, which use only a fishing line for a trimmer. It is designed for mowing juicy and soft grass. But there are models with a capacity of more than 1 kilowatts on which metal knives are installed. They cut sowing and other hard weeds, trim the young shrub.

In order to replace the cord with knives, you need to unscrew the mounting nut, install the cutting element. Then the nut must be returned to the place, tighten it with the key.

The operator must take care of his safety. Mow grass in tight protective clothes. Special glasses are used to protect the eyes, they will protect from dust, grass and flying garbage. Hands are covered with gloves.

The electric trimmer for the grass is included in the network, and the battery models are charged for several hours before starting operation. Fuel is poured into a gasoline mower.

The mower is kept so that the spool or knife is located parallel to the ground. When the tool is installed in the correct position, the motor is included. After the grass is bewildered, the mower is turned off.

How to cut the lawn so that it turns out to be even

So that the grass on the lawn is trimmed evenly, it is necessary to lower the mower as low as possible during operation. The site must be divided into squares. You need to work, moving clockwise. In this case, the hay will always lie on the left without interfering under the feet.

How to wear a belt

If the tool has a shoulder mount, before starting work it hangs on the shoulder. The trimmer for the grass is fixed on both shoulders if it has a backbone mount.

The model with a bicycle handle is held with 2 hands, the D-shaped handle is wrapped in palm. The belt must be worn so that it is convenient, then the back will not get tired.

How to refuel a benzotrimer

Motokos working on gasoline are with two.stroke and four.stroke engines. The first option is much more common. What are the differences between them:

in trimmers with a 2-tact engine, the response to press the inclusion lever is faster (for this reason the lawn mower is mainly equipped with this type of engine); A tool with a two.stroke engine will be much easier, as well as easier to maintain; Fuel consumption in a two-stroke engine is higher than in a 4-stroke with a similar power by about 30%; The 4x-stroke engine is more environmentally friendly, since the fuel in it burns completely and is not thrown into the atmosphere, as well as its noise level is much lower; And the most important distinguishing feature is the refueling: a 2x-stroke engine is equipped with one common tank, where gasoline mixed with butter is poured; 4x-tacte has a separate gas tank and a tank for motor oil.

Homemade TRIMMER BIKE !?

For refueling, it is necessary to use fresh gasoline AI-92 or AI-95 and high-quality motor oil for garden equipment (for 2x- and 4-tact engines, manufacturers produce different oil). Oil can be used mineral, semi.synthetic or synthetic.

The proportion of gasoline and oil for trimmers with a 2x-tact engine can be found from the instructions for a specific model. Usually it is 50: 1, in some cases, proportions of 25: 1 or 40: 1 are recommended. Prepare the fuel mixture in a separate container with accurate observance of proportions. Never pour the liquids “by eye” directly into the tank without mixing them in advance. Detailed instructions for mixing a benzomalam, with video and description, can be found on our website here.

Types and differences of cutting nozzles for motorcycle

Most often, lawnmands are used along with cutting fishing. The latter can have different thicknesses, however, regardless of this parameter, all the fishing lines available on sale are used mainly to mowing young grass.

If the gardener needs to mow large weeds or clear the old dry shrubs, then in this case you will need to use a knife for a trimmer for grass. Metal or plastic can be used for its production. The metal product is used to equip more powerful motorcycles, while a plastic cutting element can be installed exclusively on electric and gasoline trimmers for grass, with a capacity of up to 1.2 liters. With.

All knives available on sale are divided among themselves according to the number of teeth for cutting.

On sale you can find cutting elements with so many teeth:

  • 2 teeth. this knife for motorcycles is designed to mow young and soft grass;
  • 3 teeth. a cutting element is used to mow young solid grass and small weeds;
  • 4 teeth. products of this type are well suited for quick feed blank;
  • 8 teeth. a suitable knife for fast blank of dry grass and straw;
  • 10 teeth. this device is designed to mow thick wild shoots and young shoots of wild trees. Most often, this shift knife is used by housing and communal services for clearing densely overgrown sections along roads and railway tracks;.
  • 24 tooths. this shift knife for a trimmer for grass quickly and efficiently clears the shrubs, as well as the stem stalks of weeds;
  • 26 teeth. used for low and even mowing of large old weeds and shrubs;
  • 40 teeth. designed to cut young trees, the thickness of the stems of which does not exceed 3-4 cm. The cutting nozzle of this type has a rather large weight, so installing it on an electric trimmer for grass is not recommended.

Knives, in the design of which there are more than 40 teeth, are called discs. The disk for the lawn mower is most often installed in cases where the gardener needs to quickly remove the thick shoots of large weeds and wild shrubs. In most cases, the discs for a trimmer for grass are used only with a sufficiently powerful tool. These cutting elements with carbide attacks easily cope with young shoots of trees, the thickness of which reaches 5 cm.

BTR-52 lawn mower

BTR-52 lawn mower is a gasoline trimmer for Nikkey production grass. This company is an official manufacturer of the technique for the garden and cottage. These devices are collected in Belarus, and the production and office of the manufacturer are located in the Scottish city of Edinburgh. The described model is very popular and is competing with the leading European brands.

The lawn mower is universal, equipped with two cutting elements: fishing line and knife, if necessary, you can replace one cutting element with another.

BTR-52 mower is designed to work in areas up to 700 square meters.m.

So the motor will not wear out quickly. The engine on the BTR-52 motorcycle is two-stroke, one-cylinder, power of 3.1 horses or 2300 watts.

Advantages of the lawnmand BTR-52

  • functionality;
  • quick launch;
  • the ability to choose the type of cutting element and replace it as necessary;
  • low weight;
  • mobility (do not need extension cords or constant recharging batteries);
  • You can easily find the necessary spare part to the trimmer.

How to adjust the mounts of motorcycles. Running belt

The comfort of the gardener and, as a result, the speed and duration of its work depends on the correctness of the mounting of the motorcycle belt. Many do not want to waste time adjusting the fasteners of a gasoline trimmer for grass on a biceps belt, and it may be justified if you need to crush the grass only on a small section or near the fence, but with huge areas the issue of convenience and endurance will become the main ones if we do not want to stretch the mowing for a certain number of days. In addition, the correctly adjusted attachment of the lawn mower will make it much safer to mowing grass. As for me, then you should figure out this issue.

What are trimmers for grass and motorcycles

The capabilities of a trimmer for grass or motorcycles determines the engine primarily installed on them. There are only two options here: electric or gasoline, and three varieties. three: an electric motor can receive power either from the network or from the battery. The “weight category” of the apparatus depends on the engine power.

The simplest are electric trimmers for grass. Since the engine is located below, its weight cannot be too large: it will be inconvenient to hold. These are models with a power of 300-600 watts, a fishing line with 1.2-1.6 mm. Purpose. mainly care for lawn grass.

trimmer for grass in the edge of the edge. The support wheel in this case is a huge help

In the weeds, the fishing line will increase greatly, but if you do not run, you can mow “soft” young weeds. There are no gasoline trimmers. the weight is too great.

Electric motorcycles have more power, a fishing line for a trimmer can be used thick. 2 mm or more diameter. On many it can really put a disk. It’s simple to work, one restriction is to mow only in a radius of several tens of meters “from the outlet”, and besides, you will have to control the extension cord. Power-about 1.0-1.3 kW, a large one may not withstand a power grid or extension cord.

Battery trimmers for grass and motorcycles appeared on the market relatively recently, but the direction is a very promising. Modern nickel-cadmium and lithium-ion batteries are capable of working on the same charge for several tens of minutes, this is enough to shield the areas calculated by several hundred square meters. For a small personal plot. quite enough.

The battery is located on the upper part of the trimmer for the grass, so that the engine can be either small or quite powerful, like small motorcycle. Usually the engine is placed below so as not to spend energy on rotation of the shaft, but there are models with a “motorized” layout.

Coil trimmer semiautomatic device, light refueling of the Denzel 96324 fishing line. price, reviews, characteristics, photo. Buy and

Convenience. independence from the network cable, the disadvantage is still a fairly high price. However, their cost is gradually falling, and many manufacturers produce entire lines of garden equipment capable of working from the same battery, so you can save on its purchase.

Electric models are also interesting in that among them (especially trimmers) the most diverse design solutions are the most diverse. The products are largely oriented to the “weaker sex”, convenience, lightness and beauty are equally important here.

The choice in the category of benzos is even larger, although the issues of design are fading into the background: the lawnmands in general are much more similar to each other. With a comparable power of electric and light gasoline motos, their weight is approximately the same, but the upper limit of the power of gasoline models is 34 liters.With.

However, these are not needed in everyday life, these are braids for grass for prolonged professional work. The most popular value of motorcycle power is approximately 1 kW for electric and 1 liter.With. (0.7 kW) for gasoline. In fact, these are the braids that are similar in power: the consumption is indicated for electric models, and the output power is indicated in gasoline.

What nozzle to use for mowing grass with a benzoca

The design of the gas station uses two types of cutting nozzles or milling. These are coils with fishing line, as well as steel or plastic disks. What is better to choose for work with a gas engineer. The site presents information on how to choose discs and fishing line for a trimmer for trimmers, as well as their types and design features. Briefly consider what types of cutting mills should be used on trimmers and benzocoses.

  • To prick soft grass, a fishing line for a trimmer is used, which is wound on a drum or coil. Lines for a trimmer, unlike metal disks, is used where the grass grows next to trees, houses, fences and other obstacles. The fishing line for a trimmer allows you to produce high.quality grass mowing near the obstacles, while without violating the design of the tool
  • Metal knives. have 2, 3, 4 or more cutting parts, through which the grip of rough grass and thickets are carried out. Practice shows that the thicker the sprayed thickets, the more blades should have a mill
  • Metal discs with small teeth in an amount of 40-80 pieces-designed to prickly prickly vegetation. It can be rough grass, weeds, thick thickets and even small trees. The larger the number of teeth on the cutting nozzle, the higher the effectiveness of the tool in question
  • Plastic discs. are used mainly on electritrimers or batteries

The choice of cutting milling cutters depends on the location of the tool. If it is planned to work in the personal territory, then a fishing line for a trimmer is selected, and for injection of grass in the field or steppe, discs with 3-4 blades or more, as well as disks with small teeth are used.

Belt setting

To ensure the conditions of comfortable work, you need to be able to wear a rug belt correctly. This process requires a certain dexterity, but then, after adjusting the satchel for itself, it will be much faster and easier to worry.

Many models of trimmers are equipped with an ordinary oblique belt. However, for work, it is best to purchase a rug belt, which is specially designed for motorcycle. Thanks to a thought.out design, it evenly distributes the weight of the device for the whole body. The shoulders with a soft lining reduce the severity and relieve pain in the forearms. The hard back disperses the load between the upper and lower backs, excluding the lower back. The impact.resistant protection for the thigh prevents the contact of motorcycles with the foot so that it does not rub and transmit vibration. In addition, the belt provides:

  • Convenient transportation of a trimmer for grass;
  • Comfort during operation due to the ergonomicity of the spit position for grass relative to the body;
  • Safety in work. the paraphernal belt prevents the slipping of motorcycles from the hands at the time of the stabs of hard objects.

DIY grass trimmer belt

Working a trimmer is much more convenient and easier to use a special belt. Thanks to him, the operator can mow large sections of grass without pain in joints and muscles for several hours in a row. The design of the biceps belt is designed so that the lawn mower is kept using the mounts itself. without the help of hands. She will only need to set the direction, and she will do everything else herself. About how to correctly attach a belt to a trimmer and set it up for yourself to facilitate the load, and it will be discussed in this material.

Adjusting shoulder belts

So that the load is distributed evenly on the shoulders and back, you need to adjust the shoulder belts well. To do this, just tighten or relax the straps. they should not dig into the body or hang. You can understand how the weight will be dispersed, if you press with your own hands on a hook for suspension braids for grass.

How to correctly configure a belt of a lawn mower for yourself

Service centers often complain about consumers of household garden equipment, who still make mistakes at the stage of its assembly and the first launch and disable equipment. Of course, there is an instruction in the package, but either it is stupidly written, or it is read after the wrong assembly, when unnecessary details were found or, worse, a breakdown occurred. Meanwhile, there is nothing complicated in the assembly of household garden equipment. You just need to be careful. Let us give an example the procedure for assembling the Stihl FS 130 lawn mower, complementing our instructions with illustrations.

You need to start the assembly with the fact that open the box and check the package of the unit. If everything is in place, then we have to put the handle to the bar with the motor, put on the belt, attach a protective casing and cutting elements.

First you need to get the handle and unscrew the barbar, which attaches the upper part of the support, without giving up the springs.

We insert the handle into the nest and fix it without tightening it. We adjust the final position after the final assembly of the lawn mower.

We put on the control knob on the handle tube and tighten the mounting bolt. For this, the kit has a universal key.

All stihl fs gas troops are located on the handle. This is: a gas lever that protects against random turned on and the lever of turning off the unit, which is controlled by the thumb. At the modification, motokos with a D-shaped handle are located next to the engine on the bar.

Put a plastic protective casing. If it is planned to use only a knife, then for its operation we use part of the casing (in the picture it is painted with orange).

If the cutting fishing line is working, then a plastic skirt is additionally put on a protective casing and a knife is placed for cutting a fishing line. In some varieties of this model, the casing can be universal or two different casings are attached to the fishing line and the other for a knife.

Putting the skirt on the casing, you need to check the reliability of its fastening. Sometimes it may be necessary to fix this protection with another screw.

Now you need to put a knife for cutting fishing line and fix it with a screw.

It remains to install the coil, having previously tucked it with a fishing line. The coil is wound on the shaft (as in the illustration) or attached with a special nut. Keep in mind that the thread on the shaft is usually the left. How to refuel a fishing line for a trimmer to a coil read in the instructions.

If a knife is required, then instead of a coil we put it. The knife is equipped with a protective lid so that during operation it does not bury into the soil. After installing it, do not forget to scroll through this cutting element and make sure that there is no backlash.

Well, the last, the easiest, stage installation on the bar of a metal clamp, t.e. suspension belt mounts.

After the lawn mower is assembled, we put on a shoulder belt or a belt parallel suspension (depending on what is given in the kit) and drive them according to the figure. Pour the gasoline mixture, start the engine and go.

Fresh Комментарии и мнения владельцев. Grass trimmer belt. How to adjust Range Grass trimmer belt

Adjust the height of the hook of the smynet belt of the trimmer for the grass with a handle of the shoulder straps so that the trimmer knife lowered to the ground is located parallel to the surface of the site (strictly horizontally). When working with a saw trimmer disk, adjust the grass The height of the hook (with a lift of the shoulder belts) so that the sawy disk of the trimmer for the grass is tilted slightly forward relative to the surface of the earth.

Moving the ear for hanging braids for grass on a trimmer belt for the grass forward or backward, equalize the trimmer for the grass so that when the steering wheel is released, the trimmer knife for the grass is near the very surface of the site, but does not go to the grass. For sawing bushes and young trees, a trimmer for the grass with a saw drive of a bureau for the grass should be equalized so that when the steering wheel is released, the car hung on the hook horizontally land. Attach.

Adjust the shoulder belts of a trimmer for grass (braids) so that the load is distributed evenly on the shoulders (check by pressing the handle of the trimmer for the grass on the hook on the hook).

The video pro Range Husqvarna grass trimmer belt. On the design features of the belt suspension (harness), which facilitate and make a more safe mowing with a motorcycle, a trimmer, a benzocosa, a Husqvarna bush and an elastic belt, quickly unfastened locks (carabiners) in case of fire or any other situation requiring a quick release from Trimmer for grass. On the universality of belts for men and women.

Such Range belts of a trimmer for grass from Husqvarna (Balance 35/55, Balance X, Balance XT) can be used on any trimmers, benzocoses, motorcycles, electric cosecs, and bureaus.

Belt system

Only a good shoulder belt, redistributing part of the weight on the back and shoulders of the operator, can reduce the load on the hands when working with a fairly severe manual tool.

The shoulder system of the belts. For comfortable use of a relatively light household trimmer, a simple belt is enough for one shoulder. If you have to work with a semi.professional or professional class motorcycle, we strongly recommend that you look closely with belts.

Systems of paratrooper.type belts, although they are more expensive, but more evenly distribute the weight of the tool on the shoulders and back of the user, which means that they significantly reduce fatigue with many hours of weed fighting.

Such satchels are often equipped with special bags for storing cutting equipment, as well as tools that may be needed to repair a trimmer for grass in the field. And a special lining, which manufacturers supply the belt system, protects the thigh of the operator from burns in contact with the engine heated during operation and reduces the level of transmitted vibration.

belt, motorcycles, shoulder, trimmer, grass

2-stroke engine

Two.stroke engines in comparison with four.stroke, having less weight, operate in a higher speed speed, which provides greater performance. Of course, two.strokes “eat” more fuel and produce a lot of noise and exhaust, but at the same time bribe their unpretentiousness in the work. Work with a trimmer equipped with a two-stroke engine will have to start each time with the preparation of a gasoline-oil mixture, but if such an engine suddenly fails, reanimate it, most likely will not be difficult.

Household gasoline trimmers for grass

Household trimmers for grass are designed for mowing low grass in a relatively small area, the area of ​​which does not exceed 10-15 acres. As a rule, we are talking about caring for a lawn near the house. They are not capable of more: household trimmers for grass do not withstand long work, 1-1.5 hours a day. their limit. Thanks to modest power (not more than 1-1.5 l.With.) and dimensions of the engine, such a tool has low weight, which means that it can be used without special supporting belts.

Often, household trimmers for grass are equipped with a curved rod. The curved rod of a household trimmer for grass increases its maneuverability and allows you to easily cut grass in places, for example, around the bushes. However, due to this design of the bar, a flexible shaft is installed inside, which negatively affects the reliability of the tool. As a cutting element of a household trimmer for grass, a cord is usually used (a special fishing line for a trimmer), although plastic knives are sometimes included as an addition to some models as an addition.

How to wear a trimmer belt for grass correctly

Working a trimmer is much more convenient and easier to use a special belt. Thanks to him, the operator can mow large sections of grass without pain in joints and muscles for several hours in a row. The design of the biceps belt is designed so that the lawn mower is kept using the mounts itself. without the help of hands. She will only need to set the direction, and she will do everything else herself. About how to correctly attach a belt to a trimmer and set it up for yourself to facilitate the load, and it will be discussed in this material.

Hook height adjustment

The most important thing is to adjust the belt so that the trimmer for the grass is at the right level from the surface of the earth. To do this, raise or lower the height of the hook, which is carried out by pulling the shoulder belts until the holder is lower than the hips by 10-15 cm (palm width). In this case, the knife of the attached braid for the grass should be parallel to the surface, that is, in a strictly horizontal position.

On a note! If the trimmer for the grass is attached too high, then this will greatly limit the capture of the grass.

Safety regulations

Among the safest and most popular trimmers, the products of German manufacturers (including Denzel) are especially appreciated, as they pay increased attention to quality and reliability. However, despite the brand and model, there are a number of rules that, when using a trimmer for grass, you need to clearly know and observe.

  • Before use, you must familiarize yourself with the instruction manual.
  • You can not work with a trimmer in a state of fatigue, illness, intoxication.
  • It is forbidden to use a braid in explosive and fire hazardous areas.
  • You can not mow during a thunderstorm and rain, as well as after the rain, when the grass is wet.
  • You can only work in daylight hours, in conditions of good illumination.
  • Only the type of fuel and lubricant, which is suitable for a specific model of a trimmer for grass, should be used.
  • It is not recommended to independently repair the tool.
  • Do not touch rotating or heated elements during operation.
  • You can not smoke and make fire in the process of mowing and t.D.

Important! When operating a trimmer for grass, there are other factors harmful to health: increased noise, vibration, exhaust gases, high temperature of some parts, flying branches, etc. To minimize risks, you need to use overalls, glasses and headphones.

If there are questions about the adjustment on a rug belt of a particular model of motorcycles, the answers can be tried to find in the operating manual attached to the products, or watch a video on the Internet, where it is clearly and accessible how to set up and adjust the belt along with a gas station.

How to make a belt for a trimmer for grass

How to mow grass with a trimmer for grass?

The main thing. properly adjust the three.dimensional belt so that the drum with hairline does not crawl on the ground.

Correctly prepare gasoline-oil mixture.

Do not use too thick a trimmer fishing line. She gains speed and overloads the trimmer for the grass.

Do not rewind too much hair on the drum and do not rewind it too much.

Stop from time to time and empty the basket.

Lubricate a trimmer for grass and gearbox (if any) grease.

The technique of trimming the trimmer for the grass is not very complicated and takes into account the need:

All details of the equipment. On the video, how to mow a trimmer for grass.

First of all, look at the area that you will have to mow. Cut the bushes or large flowers that cannot be cut.

Always start with a light zone without grass. See if there are slopes or ditches in this area. The easiest way to mow the slope.

Putting ECHO Shoulder Strap On

belt, motorcycles, shoulder, trimmer, grass

Determine the direction of the grass. It is easier to mow if the grass is tilted forward.

When it comes to clothes, always wear glasses and boots. Also, anti.vibration gloves do not interfere.

Use different knives depending on the density of the grass.

Another advice: try mowing at the same speed. This will make your mower longer. If you stop and immediately gain speed, the trimmer for the grass wears out faster.

First adjust the trimmer belt for the grass so that the drum does not touch the ground. In addition, it is important to remember that the trimmer for the grass will be overloaded due to thick hair, so do not overdo it with the thickness.

A lot of hair on the drum should not be twisted.

Do not forget to periodically clean the trimmer for grass.

Be sure to lubricate the cable with a consistent lubricant.

The trimmer for the grass is very convenient, because it can be used in a variety of places, including complex areas and trees. If you mow high grass, first start with the tops, then continue with the bulk.

Use a trimmer for the grass by purpose. Electric braid for grass (t.e. Trimmer for grass) is good that it copes well with his work in places. Therefore, a trimmer for grass can be used near trees, fences in embossed areas. And not only for mowing the lawn, but also for ordinary grass.

The main thing. This is so that the weeds do not have time to sow the seeds and mow them in time.

If you were not able to mow grass by the time she gave her ears, first mow the tops of your ears and burn them. And then mow the grass itself and put it in compost.

In almost all trimmers (except for special trimmers), a fishing line for a trimmer or a disk rotate clockwise. That is why it is better to mow grass from right to left (a movement that resembles the movement of a mowing). It can be mowed, slightly tilting.

The mowing should be calm movements, not jerks. Mow grass half the length of the hairline. If you capture more, a trimmer for the grass will be able to cope with this, but the grass can clog the space between the coil and the pipe.

Before mowing the grass, first adjust the fishing line for a trimmer of hair growth and securely fix it in the cavity so that the fishing line for a trimmer of hair growth does not hang and does not go there. Here. Then refueled accordingly (if you do not have an electric trimmer for grass), which consists of special oil and gasoline. Then start mowing grass in slow (not fast) movement to the right and left. Do not try to cut the thick stems of plants often, since the fishing line for a trimmer of hair growth ends immediately, and you will need to reconfigure the coil. In places, the main thing is not to save gas)

Note. Some trimmers for grass do not have interchangeable cutting tools, so you can immediately start using them.

trimmer for pruning grass is performed by simple movements. It is important to remember that the cutting mechanism of the device rotates counterclockwise, so that the mowed grass reaches the already processed area. The first right to the left of us (so we cut the top of the grass). Second from left to right (so we remove the remnants of the grass).

It is better to divide the large area of ​​the processed area into squares and mow the grass, moving from one to the other outside each square.

When mowing grass on the slopes, it is recommended to mow from below, moving parallel to the slope. We got to the edge, returned, became a little higher. And we repeat the same route. to completely mow the site.

To mow grass in places where trees grow, it is better to use the mechanism of deforestation, and the mowing is necessary, bypassing the site around the perimeter, bypassing the tree around the barrel.

Homemade snowman

There have been a lot of options for creating snowplifiers based on a trimmer for the grass. The easiest way to modernize is the replacement of the knife by the rotor. Such a snowman works like a shovel, but it is simply moved in the snow: the device rakes it and takes it to the side.

For the implementation of the planned alteration, such materials and tools will be needed:

  • a lawn mower with a direct bar, at the end of which a gearbox is installed;
  • metal barrel, even beer, for example, from the Baltic drink;
  • a cutter from a trimmer for grass with many teeth (used to mow dense thickets of grass);
  • drill with drills;
  • Corner grinder and welding machine.

Instead of a barrel, you can use a thin sheet of metal (tin) 1.5 mm thick.

The assembly processing process is performed in the following sequence:

  • Cut in a circle, retreating from the lower part of 15 cm, a barrel;
  • They make a hole for the gearbox in the bottom of the motorcycles and drill 3 more small holes to fix its shield;
  • A square 10 by 10 cm is cut out to the side to throw snow through it;
  • A third of the open front of the barrel is closed with a piece of metal (tin), while the hole for the release should be located along the central braid fishing line;
  • make a rotor;
  • make a deflector who will direct the discharge snow in the right direction;
  • weld it to the body at the location of the hole for the emission of snow mass;
  • fasten the shoulder blade from the bottom;
  • Install the gearbox of motorcycles and fix it with bolts;
  • put a rotor like a simple working knife.
  • A strip is cut out of metal, the width of which is 15 cm, and the length is 30 cm;
  • Lightly bend the workpiece;
  • weld 10 cm high from the long sides of the side, so that the snow does not scatter at the output.

The rotor is made in the following sequence:

  • The rectangular stripes with a size of 25 by 10 cm are cut off from the metal sheet;
  • cut and grind the plates in the shape of the blades;
  • weld them with a cross to the disk from the motorcycle.

From the remains of the material make a shoulder blade. To do this, use a piece of tin 30 by 40 cm. The edges bend along the long sides to form a two.centimeter side. snowpocking mechanism should be used on full gas. this will extend the life of the device, because frequent gas presses lead to a breakdown of the motor. It is hard to connect thin metal with welding, because it easily burns it through and through. Therefore, an experienced welder must perform work.

Required tools, materials and details

The electric engine for a bicycle is powered by a battery, which, depending on the power of the unit (it is taken 0.35-1.2 kW), is enough from 30 minutes to 2 hours.

Two- or four-stroke gasoline engines are used to remake a bicycle. The last option consumes less fuel and is not so noisy during operation. The recommended power is from 1.5 liters.With., And the best option 2 l.With. When using a motor with a smaller parameter, the motorcycle bike will barely go or will not be able to move at all at all.

Rotational movement from an engine operating on gasoline to the bicycle wheel occurs using a belt or chain transmission. Because of this, you will need to make the following details:

  • Metal suspension in the form of a frame with sides to fix the motor on the bicycle frame;
  • The driven and leading pulleys or stars for attaching to the engine and wheel, respectively.

The use of chain transmission from the point of view of practicality is preferable than a belt, because the belt wears out faster, especially if it regularly gets wet.

For the implementation of the project, you will need to choose a suitable gearbox. After installing the pulleys, choose a belt of the desired size.

The dimensions of the frame under the engine depend on its dimensions. The suspension itself to the frame of the mototalosyped is fixed:

The last option in strength is the best if the welder is good. If the design of a bicycle frame allows, then the suspension is replaced with a clamp with which the engine is fixed. This fastening option is more practical. The method of fixing the motor should be comfortable, reliable and allowed to quickly remove it if necessary.

The performance of all the work with your own hands in the presence of an old, functioning trimmer for grass, a bicycle and a small set of tools will require the executor of time, as well as patience.