How to hang a mower rotary mower. How to make a device with your own hands for a tractor

Rotor mower for a walk.behind tractor

Neva motoblocks are today one of the most popular and widely used types of agricultural equipment for household and farm. A rotary mower for a walk.behind tractor is often used as a hinged equipment installed on this unit. This type of device is a supporting mechanism and several rotating disks equipped with special blades. This design has high reliability and ease of use, and it is also most preferable for intense and safe operation.

The mower hayfield is designed to carry out the following types of work:

• mating of meadows;
• mowing cereals;
• mowing plants with a thick stem;
• removal of weeds and small shrubs;
• put in order of lawns and roadside sections with vegetation.

Varieties and device

Depending on the design features of the mowing, I am two types: rotary and segment.

Rotary

For these mechanisms, disk devices act as working elements. They are quite productive and absolutely safe during operation. Neva rotary mowing for a walk.behind tractor can lay mowed plants in even rows, due to which their subsequent drying is greatly simplified and the need for the use of foriles and rakes disappears. The unit of this type is used for mowing vegetation on the sidelines and slopes of roads, as well as to remove grass in the territories of private courtyards and estates. Rotor.type mowles can be single.disc and double.disc. Their mount to the walk.behind tractor is carried out in the front of the device. How their activities are carried out? Twisting the moment from the operating engine is transmitted to the power shaft, which in turn, through a wedge.shaped belt, interacts with the working bodies. Further, under the influence of centrifugal force, the legs of the discs are in contact with the surface of the grass and cut it off. To protect the discs from stones and solid objects, the design of the unit provides for protective covers.

Segmented

Segment.type mowals are devices that include a frame and cutting components (fingers) interconnected by special fasteners. The principle of the functioning of such an unit has similarity to the work of classic scissors: one part of the mechanism is in a stationary state, and the other makes straightforward movements. left and right. When the torque from the motor block is transmitted to the mower, then progressive vibrations of scissors and plants that fall between their fingers occur quickly and neatly cut off. Thanks to the rational form of the device, the vegetation is laid on both sides of the unit. As a result, uniform rolls are obtained, for the cleaning of which additional devices will be required, such as forks and rakes. A segmented mower for a walk.behind tractor Neva is capable of carrying out its activities in areas with a complex line of relief with mowing grain and herbal crops. The displacement of the working component of the mower in relation to the walk.behind tract can be about 20%.

Rotor mower

Neva rotary mower for the walkover is designed to mow grass, shrubs that have a stem with a diameter of up to 1 cm. Small grass is located on the surface with uniform rows, this simplifies its collection and drying. Due to small sizes and compactness, the equipment is easily transported.

Motoblocks and aggregated with hinged rotary mowers in front, from the drive of the units through the wedge belt.

The rotary mower is available in two versions:

Both options are suitable for Neva.

Rotary attachments are widespread in farmers, t.to. copes with a large volume of work and perfectly tolerates complex irregularities on the surface.

A single.disc rotor braid

The rotary mower with 1 disk is represented by the KR-05 model, specially released (St. Petersburg) for the Neva motornote.

The design of the model is compact, simple, consists of 1 large disk that allows maneuvering and mating grass, shrubs in complex places.

Rotor KR-05 mower has the following technical characteristics:

• Movement speed-2-4 km/h.
• Productivity. 0.15 ha/h.
• Capture width. 560 mm.
• Disc rotation speed. 2500 rpm.
• Mowing height. 1000 mm.
• Car weight. 30 kg.
• Machine dimensions. 700x700x680 mm.

Suitable mowel for the Neva motornote (MB-2, MB), Kadwi, Oka.

• compactness;
• mobility;
• ease of use;
• simplicity of design;
• high security;
• simple installation on a single tractor;
• high maneuverability;
• affordable price.

From the reviews of users it is clear that it is not as effective as a mower with 2 disks, but in maneuverability and work in limited spaces leads.

Double.disc rotor mower

For mowing rude, grassy vegetation, grain crops, small bushes in large areas, a hinged mechanism with 2 disks is more often used. It works effectively on a flat surface without obstacles: trees, holes, hills, fences. It works worse on irregularities, it is more difficult to operate, but farmers use it in small areas, roadsides, slopes with a small side inclination and steepness.

The mowed grass is evenly laid in separate rows, is dried naturally and collected.

For the Neva walk.behind tractor, a rotary dawn with 2 disks is used, the manufacturer of which is the Kaluga Engine OJSC.

The principle of action of the mowing room to the Neva Neva Motobobka.

There are 4 knives on the disks, which are attached by slate. When the disks rotate towards each other, a centrifugal force is created, pushing the knives. Cutting blades operate as long as the engine of the walk.behind.

Kosba with 2 disks significantly increases the area of ​​mowing. For dawn, it is 80 cm and is an excellent indicator.

The height of the height of the grass mowing is carried out using special sling.

Dawn for the Neva walk.behind tractor has the following characteristics:

• Machine dimensions. 810x930x780 mm.
• Weight. 33 kg.
• Processing width. 800 mm.
• Operational speed. 2.87 km/h.
• Mowing height. up to 1000 mm.
• Productivity. 0.2 ha/h.
• The speed of rotation of the cutting disk is 2370-2635 rpm.
• Adjustable mowing height-3-10 cm.

The disadvantages of rotary mounted mezanism dawn are as follows:

• The need to carefully check the device before starting. Incorrect knife mounting can lead to increased injuries.
• Constant control of movements.
• The presence of restrictions on mowing grass. It should be up to 1 m and erect.

According to users, the dawn mowel is characterized by quality, reliability, trouble.free work.

Rotor braid KR 05

It remains the only option for installation on the uniform tractor Neva. Setting up a mowing, its installation belong to maximum simple operations: it is immediately ready for work. Based on a single cutting knife-clip closed with a protective screen. This design allows you to protect the twigs, stones, which often come across in the grass. Even a schoolboy will cope with the connection to the walk.behind tractor, there is nothing complicated about it.

Specifications

Further, the main technical indicators of the Rotor brand Kr 05 to Neva motoblocks are briefly given: Neva

• weight. 30 kg;
• Dimensions. 70 (height) × 70 (width) × 70 cm (length);
• working speed of movement (medium)-2-4 km/h;
• productivity-0.1-0.15 ha/h;
• knife installation height. 4 cm;
• Dangerous rotor rotation zone. about 60 cm.

When working mowers with the Neva motornote, special attention should be paid to knives, the performance, the service life of the equipment depends on them. In this model, the cutting rotor is made of high.quality carbon steel, hardened and sharpened by the factory way. The result is an inexpensive and practical tool that allows you to cut not only grass, but also small shrubs. Of course, the knives will dull over time, but they are good to sharpen in domestic conditions. To do this, disassemble the mitch, taking off its lower part, unscrew the rotor and replace it with a new one (or sharpen, and then put it in place).

Wirax and Lisicki mowel, Polish hinged. how to put a cylinder for lifting yourself

Agricultural equipment has long and firmly entered the familiar life of a rural resident. over, it does not matter whether he is engaged in agriculture at a professional level or not. One way or another, everyone is faced with the need to acquire such a technique, because the farmer’s work is very difficult, which is not always able to cope with his own hands.

And if you take into account the coarse of large agricults and farms, then there you just can not do without such technology. Therefore, in recent decades there has been an extraordinary demand for various sowing, tractor, soil and other types of equipment.

Various mowers for a tractor gained considerable popularity, allowing to process large areas, mating grass and various crops. Large agricultural companies promptly reacted to such a tendency, expanding the vector of their development to the production of such units and devices.

At the moment, three categories of main manufacturers of rotary mowers for tractors note: European companies, domestic manufacturers and Chinese equipment. Each category has its pros and cons, for example, Chinese manufacturers provide their equipment at very favorable prices, significantly different from European.

However, the low price is perhaps the only advantage of such models. If you need a really high.quality product, then your choice should fall either by equipment that is characterized by the optimal combination of price and quality, or for European models. Of course, the price of them will be slightly higher, but for quality, as we know, we always have to pay more. About a wise approach to the question of how to choose a lawn mower we will tell you here.

Modern production technologies and advanced technological enterprises located in Europe allows this quality to demonstrate to fully. One of the most famous manufacturers, popular among farmers, is the Polish company Wirax, which produces various agricultural machinery, including rotary mowers for tractors. You can find out about a segmented mower for a tractor, which is an excellent alternative to Wirax mowers in this article.

Safety safety precautions for a homemade rotary mowing

In this article you had the opportunity to find out how you can make a rotary mower with your own hands. In fact, as you have seen yourself, there is nothing particularly complicated in this process, therefore, even a professional can easily cope with this kind of manipulation. However, if you do not want to take risks and start with a small one, we bring to your attention a manual gasoline mower for the grass.

The most important thing in the manufacture of a rotary mower is that you are extremely carefully repelled from our advice on both regarding manufacture and safety.

You may also be interested in the article Home.made sawmill with your own hands.

The model range of units

Consider the most popular models. Rotor KRM-1 Rotor Rotor Power for mowing agricultural cultures and herbs on a flat surface. The tool can be installed on the motoblocks Belarus. The device is not suitable for industrial use on the farm.

• Weight. 45 kg.
• Dimensional dimensions. 930x660x420 mm.
• Capture width. 600 mm.
• Cut height. 40 mm.
• Speed ​​- 2.5 km/h.
• Performance. 1500 m²/h.
• Resource. 1200 hours.
• Knife rotation frequency. 2300 rpm.

L-501 braid is designed to mow the grass and lay it in the wrap. Work is carried out through rotation of 2 rotors with a cutting device. To protect against stones, the tool is equipped with a protective device. The braid is compatible with tractors of the traction class 0.9 and 1.4 tons. The L-501 D model differs in that it can work on slopes at an angle up to 45 °.

• Weight. 430 kg.
• Dimensional dimensions. 3650x1050x1150 mm.
• Productivity. 1.4 ha/h.
• Speed ​​- 8 km/h.
• Capture width. 190 cm.
• Cut height-3-6 cm.
• Rotor rotation speed. 1900 rpm.
• Manufacturer. OJSC Lidselmash.

Roting KRR mowels have a belt drive of rotors. Capture width is 2.4 m. Thanks to the belt drive, you do not need to use lubricants. This reduces operating costs and reduces the weight of the tool. Units are used to mow high.yielding plants, processing slopes.

Thanks to the use of round rotors, knives deformation in a collision with stones and other obstacles is excluded.

In the device, knives with a cutting edge of enhanced strength are used in the device. Such a cutting tool ensures the efficiency and safety of the work performed. Rotation devices rotate at a speed of 3,500 rpm and provide a cut rate of up to 90 m/s. This makes it possible to effectively mow grass and plants with high productivity without damage to the roots.

A strong system of hitching and balancing the device allows you to work on an uneven relief and exert the least pressure on the ground. You can regulate the balance of the transverse beam and knives. The device used the hexagonal belt of the HBB-5450 brand, which is produced by Indian. Such belts were developed by the company’s specialists specifically for a rotary mower, taking into account the features of the instrument drive.

• Belt drive.
• Productivity. 2.8 ha/h.
• Capture width. 2.4 m.
• Engine power. 35 liters.With.
• Speed ​​- 15 km/h.
• The number of working discs is 5.
• The height of the cut in a horizontal position is 40-70 mm.
• The frequency of rotation of the working discs is 3500 rpm.
• Screw instrument screw.
• Knife speed. 90 m/s.
• Weight. 460 kg.
• Manufacturer. Agramak.

DIY segment mower

The process of manufacturing a segmented haymaking looks like this:

• Drawing up a frame frame. for this we take metal bars with dimensions of 1.5 x 1.5 x 1.2 cm and drill 12 holes in each of them. Their diameter should be suitable for M8 bolts;

A similar mower can be done with a grass collector or rake-linters, adding additional functions to it-mulching grass, turning hay.

The detailed process of their manufacture is presented in the video.

Popular models of hinged rotary braids

KRM 2-00.000. The model is designed to work with the Belarus-09N motor blocks on areas with a complex surface. Mowing width up to 740 mm, cut height 10-40 mm. The power of the gun is sufficient for the cut of wild heterogeneous herbs, ennoble abandoned areas. This type of hinged braids is used to work in large territories. The product is supplied in full set in disassembled form.

KRM-2. The equipment has performance up to 2000 m2/h, therefore it is widely used in the city economy and in personal plots. The model effectively copes with wild and seeded herbs, cuts stems to a height of up to 40 mm. Designed for aggregation with the Belarus motornote, works from VOM.

KRM-1. 30 kg mower more lighter than models of the second series. Cut height 3-5 cm, capture width 60 cm. The model is light, compact, maneuverable, well suited for caring for a personal plot, a lawn near the house, for mowing grass on the sidelines and small platforms. The braid is aggregated with the Belarusian, Agros motor blocks using a gear shank.

WM 1000. Light hinged gun, which can easily be transferred along the site. It is great for hay harvesting in small volumes, for preparing the garden for landing work. The height of the modification of the model is up to 70 mm, the speed of 4 km/h against 2.5 km/h for more massive devices.

Technical characteristics of the KRN-2 rotary mower.one

We advise us to read our other articles

• Unoic tractor centaur MB 1080D
• T-40 tractor
• PPO plow 8-40
• Minitor Scout T-15

• Capture width, m 2.1;
• Performance, ha/hour up to 2.5;
• Working speed, km/hour to 15;
• Number of rotors, pcs. four;
• Cut height, mm (minimum.) 40;
• Mass, kg 535;
• Dimensional dimensions in the transport position, mm 1620x3480x1330.

The parameters of the technical plan

Below are the characteristics that the rotary mower “Dawn of the Kr.05.000 “. The parameters for the KR are indicated in the brackets.05.000-03 and Zari-1:

• Motoboblock power. 5 (7/6) horsepower.
• Capture in width. for all models it is 80 cm.
• Working rate maximum. 4 (4/3) km/h.
• The maximum height of the cut is 7 (7/10) cm.
• The height of the processed grass to the maximum. all modifications of 1 m for all modifications.
• Performance. 0.2 (0.15/0.2) ha/hour.
• Resource. 2400 (2400/2635) of rotations per minute.
• Length. 80 (81/49.2) cm.
• Width. 93 (93/84) cm.
• Height. 54 (78/43) cm.
• Mass. 31 (33/28) kg.

Modernization or refinement

The main disadvantages of any braid that can be bought at the store are:

• insufficient strength of the structure;
• insufficiently rigid fixation to the walk.behind tractor;
• ineffective sharpening of knives;
• ineffective lubrication of rubbing parts;
• insufficient ski length;
• lack of defense of the operator;
• the impossibility of comfortable movement.

To increase the rigidity of the structure, pipe and other elements are welded to the braids on the bolts that remove excessive mobility of the frame. If the standard mount does not provide enough rigid fixation of the attachment equipment to the chassis, then it is redone, eliminating all the backlash. The method of alteration and refinement depends on the design of both devices.

The standard knives have no notes, so instead of them are used by homemade dampers, sliced ​​from old sickles or knives of various agricultural machines, and then balanced so that vibration does not appear after installing them.

Reducers are often supplied with gearboxes without sufficient lubrication, especially often this happens with Chinese and devices.

In order not to disassemble the gearbox each time, a tawnnik is cut into its side or upper wall from a car, for example, gas 2410, then once a month or season through it is served a suitable lubricant.

Facial devices equipped with standard skiing are well suited for even areas, however, where there are pits of various sizes, their lengths are not enough, so the braid can fail, which will lead to a damage to the knife and possible breakdown of the shaft. Therefore, those who are forced to mow grass in uneven areas welcome extension cords to standard skis, so that the mowing passes without incident.

Almost all braids are deprived of the operator’s protection, so a stick or stone that came under a knife can injure you.

To avoid this, stretch behind the plates under the engine of a target from a tarpaulin or durable linoleum.

Parts of the owners of such devices do not like to walk for a long time, so in addition to the hitch, the mowing is attached to the walk.behind tractor, turning the device into a self.propelled machine. After such an alteration, even the mowing of huge areas is not difficult, because the operator does not have to follow the mower on foot, because he controls her while in the cart’s seat.

How to install a rotary mower on a single tractor

How to make a mitch for a mini-tractor yourself? | Topica author: Seryoga

Gennady (Damiana) Options two. To come up with something own skill, how else it is called to make a copy of a standard tractor suspension mowing.

IVAN (Dorrie) This is true, I can see it with us one man made a mower. Mowing at a good level than factory

Musavir (eyulf) Seryoga, you are not slightly fit, our client is currently under the snow, but something is something.And I can show. I have at the moment a rotary belt, I dismantled it, preparation for the summer season, substitution of bearings, belt and.T.D to the article If you take closed bearings, have no lubricant at the moment, I burned now myself.If you are going to hang a mitten in front of you can perform a rotary

Gennady right here depends on desires.

Musavir (eyulf) Seryoga here are some details without which for you at the stage of producing mowers cannot be dispensed with, put unique or homemade/photo in the album of homemade products/

Zhenyaa (adalgisa) for a couple of years prepared moss for building a house, because the swampy site had to cut the moss with a saw of the huzcavarian, why did I like this considerable hearing process that the thought was born based on the chainsaws insignificant to make a mushroom for the grass, but before the project was implemented, but before the implementation of the project So it did not come (((maybe someone had experience, experimented? Recommend?

Read How to install an ignition on a benzo.c

IVAN (Dorrie) although why not? Stick the long-range chain (I have a skewed 6 in vain in the friendship of the old one), the canvas, accordingly, is, accordingly, the length of 2 plates is a gap for the chain. The main thing is to make fingers so that the grass when moving into the bundles is going to rest from them and the chain will be cut off. There is an option to experience just on a chainsaw on the canvas such fingers put and experience the process. If it goes and then it is possible to perform a huge mitch))))))))))))

Viktor (Klementyna) I doubt. Will it cut the grass, not tear? After all, the saw chain, especially the hook, is designed specifically for the wood rock. She cuts the chips from the tree, deepening the drink. And the grass can just tear and drag under the fingers.

Zhenyaa (adalgisa), although it is better to take Druzhbovskaya straight just to change the angle of sharpening and bring the lubrication of the chain. Try to carry out a saw on the grass at huge speeds to be perfectly cut off on the subject of lining the grass, and with segment fingers I think it will be even better than t.To. For grass, emphasis appears, rotary braids inertia knives chop grass. And naturally everything is known in practical experience! ))

Read Stihl 180 stalls idle reason

Rotor mowing mount to the Neva motor block MB-2

Homemade device for hard attaching rotor

mowers dawn kmotobo block Neva MB-2.

Alexander (Cristoval) in some places once on TV I saw this type with a chain mower

However, this homemade was either factory. I do not know. But I remember the mower perfectly

IVAN (Dorrie) make a non-spar, from a combine knife, one motionless canvas is placed, the 2nd with a drive from a crank, there is an option to even make a drive from a hydraulic motor

Tags: how to install a rotary mower

Motoblocks | Topica author: A

Lyud, tell me how the overstated oil level in the Carter of the ICE Lifan-168 is fraught with? When changing the oil, it immediately flooded about 800-850 ml., For work experience last season, I remember what I had to add, t to the motoblock in the slope, with the glitch engine, today I decided to immediately pour more. I tilted a slightly tilted tractor and added a bit than just a level! Whether or the danger of this?

A (ryouko) or it may be better to pour the norm, and with the left tilt, just turn off the level sensor? With a large level and inclination of the cylinder, you will always get a hydraulic.

Read why not start a diesel unoic tractor

Ilya (Dieter) How Fucking Hydra Hydra is Water Water Vaszet a bit above normal is not a terrible oil to the oil is not comfortable

A (ryouko) hydro. This is a liquid. It is different, even like oil.

A (ryouko) just tolerate the sensor wire running on the sensor relay connector. There is certainly such a square box, this is the relay of the oil level sensor.

Ilya (Dieter) was heated on Honda with a periwarot of oil papadal on the phyrtor vasmore so the engine worked as in the beginning there was no sense of soil.made blue smoke as a paravoz

A (ryouko) what remains to make our client realized, thanks everyone!

Sergey (Tane) did not utter the most important threat, this is fraught with the failure of the crankshaft oil seals and a violation of the crankcase ventilation.

Tagir (Brijmohan) when the engine stalls on the left. However, it is not yet assigned to the reason. Lifan 6, 5 engine.

A (ryouko) it is better to make a separate topic, not just answers will be. Most likely, the oil level sensor works, or turn it off, or add little oil to the engine, 50 grams

The price of a rotary mower to a walk.behind tractor

Price scatter, as well as a list of manufacturers, is quite large. For example, and a similar, but less powerful Aurora Grass 1000 unit will cost 13 thousand.

Rostselmash equipment mowers of the industrial association agricultural

Together with a huge spectrum of specialized CX. The company produces a complex of trailed and hinged machines that agrigat with MTZ tractors for cleaning and harvesting green feed. The technique is distinguished by its innovative design, increased operational indicators and meets the advanced standards of the world level. The company’s products are successfully competing in the foreign market of agricultural. technology.

Cenific braids Strege 2100-2800 and Sapsun 2400

The modernized versions of the KRN mowel differs: high speeds of active discs providing cutting the stem without damage to the root system of culture, which increases the reproduction of the cultivated culture, the cutting segment has an innovative curved profile, allowing the stem, without chopping it, ensuring the quality of the harvested green mass, the machine has 5 comfortable lubrication points. The rotors are equipped with a safety cut device to protect the working beam from damage when clash with hidden items. Casing, a front.line form and a rotating drum on the extreme disk form a convenient roll for the selection of mowed grass. Machines are stable of height and cleanliness of the cut along the entire length of the cutting timber.

Sapsun 2400 mower is characterized by an additional installed shaft with V-shaped scourges that scare the grass throughout the working width, ensuring the speed and uniformity of drying the harvested feed.

Characteristics

Working body Shipye 2100 working bodies Sapsan working bodies Sapsan 2400

Practicing rotational mower Golder Berkut 3200

The machine attracts attention with its performance, an additional plot mechanism and the laying function in the green mass of the green mass. The plushchal organ is two rollers with specialized rubber cylindrical segments. With the wear of the central part on the ivy shafts, the extreme segments change places with the central. The position of the cutting organs relative to the ivy apparatus is regulated by the displacement of the beam with rotating discs. The degree of pluming of grass is regulated by a change in the gap between the rollers. The rotary gearbox of the machine allows us to carry out maneuvers with a minimum radius without disconnecting VOM, which significantly increases productivity. Reinforced frame and a fluid.former of the machine confidently withstand the loads when working on areas with high yields.

Specifications

• capture width 3.2 meters
• Productivity 4.5 ha/hour
• working speed of movement up to 18 km/h
• The speed of rotation of the active body is up to 3000 rpm
• The drive from independent VOM for 1000 rpm

Berkut working bodies 3200 replacement of roller segments

Sterh 2000 trailed rotor mower

The principle of operation of the cutting apparatus is similar to Cyrus1.5. The cut is carried out by a rotor with a spatula.type knives. The machine corresponds to the functions of the feed harvester, it can mow and grind cultures with a height of up to 1.5 m, while loading the mass into a nearby vehicle or trailer in the unit. The self.embarrassing knives of the cutting apparatus are made of high.strength alloy steel. Silo.pipeline control is carried out by hydraulics from the cabin of the tractor.

Characteristics

• Performance 38 t/h/hour
• The speed of the grinding apparatus 1000 rpm
• Aggregate with class 1 tractors.4 t/s
• The drive is carried out from the rear independent VOM tractor at a speed of 540 rpm

A hinged mowel for the red.hot road Cheege 184

The machine has unique functional and operational qualities. The cutting organ of the rotary type mowel with hammer knives is able to mow and grind shrubs with a stem thick of up to 35 mm. The width of the car capture is 1.8 meters. Rotor speed from to 2100 rpm. The braid is hung on the three.point tractor hitch. The design of the hydraulic drive rotary mechanism allows the machine to work in horizontal and vertical planes. The protective casing of the brush of the working organs of the machine eliminates the loss of crushed plants outside the sector of the cutting apparatus.

Chizh 184 with MTZ turning the working position of the car Chizh 184 Chizh 184

Communal mowers of the Rotation type KRS, DM-1800, KN-1700

A hinging equipment is designed for mowing and grinding grass and small shrub with a stem thick of up to 25 mm up to 1 meter high. It is used for the overclock of roadsides, railroad tracks, in garden parking sections and lawns. Aggregate with MTZ 80 brand tractors.82, MTZ 890.892 for the MTZ 320 tractor with a capture width of not more than 2 meters. Modifications of the machine have a capture width from 1.4 to 2.8 meters. Depending on the working width of the braid, they are equipped with two or three active rotors with four knives, rotors rotation speed 1000 rpm. The drive is carried out from the rear independent VOM with a rotation speed of 540 rpm. The height of the cut is set by the position of the support wheels or rollers. The machine is hanging hard on the three.point tractor hitch.

The traditional design of the cutting mechanism of the cereal harvesting combine harvesters has a segment-plot design. The principle of operation is the return progressive movement of the knife with cutting segments. Cutting is carried out by squeezing the stalks of plants between the cutting edge of the knife segment and the contradictory plate of a passive finger.

A similar design has a hinged segment braid for MTZ KPS.2.one. The design includes: a frame with a hinged device, a cardan drive shaft, a wedge-shaped transmission to a crooked gearbox providing a reciprocating movement with a knife, a beam equipped with passive fingers with contradictory plates and an active knife with cutting segments. The end of the beam is equipped with a shoe with a field board. To fix the beam in the transport position, the braid is equipped with a fixing rod. Similar design have segment mowers CS: Go-F-2.one.

Specifications

• The width of the capture is 2.1 meter
• Working speed up to 12 km/h
• Productivity 2.5 ha/hour
• Car weight 250 kg
• Minimum cut height 60 mm
• Aggregated with tractors of the traction class from 0.6 to 1.4 t/s
• Are given from the rear independent VOM tractor at a speed of 540 rpm

Along with hinged models, segment.type mowals have a semi.waist and trailer version with two or three cutting devices. The design of the braid is characterized by a frame with running wheels and a trailer device. Cutting beams with a drive mechanism are attached to the frame. The transfer of the unit to a transport or working position is carried out by remote hydraulic cylinders. So, models KPS-2-2.1b, KDP-4, KD-F-4 are equipped with two knives and a working capture of 4 meters. Model KTP-6, KP-F-6 with three cutting devices and a capture of 6 meters. Widely.powerful performance of finger braids today did not gain sufficient popularity due to the complex drive system and connection with the tractor when aggregated.

The advantages of segmented mowing machines include a fairly low cost, as well as simplicity of design and maintenance. The disadvantages of mowers are: the poor stability of the cutting mechanism for the emergency hit of solid foreign objects, the replacement of damaged segments requires complete dismantling of the knife, poor frontacon formation during bearding.

All of the above cars are actively aggregated with MTZ brand tractors. The presence of a mowing in the arsenal of the drive machine park provides loading and expands the functional use of the MTZ tractor in the enterprise. The work of mowers with Belarus tractors in agriculture can completely replace the need to acquire and maintain special feeding self.propelled vehicles, providing the enterprise with maximum economic efficiency. When choosing a model of the machine, the specifics and goals of application, working conditions, the amount of work performed are taken into account.