How to lubricate a trimmer’s blades for oil grass. How to lubricate the machine: step -by -step instructions

How can you grease the hair cutting machine at home

Each self.respecting mistress has a hair cutting machine in stock to cut and correct the hairstyle of her relatives and not rarely friends. Many unmarried men have this hair care tool, since beards have become popular recently, and caring for it requires special attention. Carrots for haircuts gained popularity in everyday life and began to be used far beyond the boundaries of beauty salons and hairdressers, as they are simple in circulation and are simple in their device. An important plus is that its price does not bite, and a huge assortment allows you to choose exactly the device that is suitable for your requirements. But, as with any electromechanical device, it must be monitored and maintained, otherwise the machine will become unusable. In this article we will talk about how to lubricate a hair cutting machine.

On the shelves of stores of electrical appliances, you can find goods for every taste and wallet. The same applies to purchases in online stores. Cars are autonomous, power supply from the network and with combined. It is better to choose a typewriter of the middle price category, so you can be confident as the sharpening of knives and guarantees that the manufacturer gives.

We disassemble the knife unit for thorough cleaning

This is what most beginners are afraid of. and in vain! It is not difficult to disassemble the knife block yourself, besides, without this, you can’t see a really clean knife.

If you have a machine with a fast.removable knife block, then you are lucky. the knife is easily removed, and all you have to do is brush the hairs of the hairs, put on a knife and continue to work. Do not forget to check if silicone lubricant is enough on an eccentric. it is also important to monitor this, because all moving parts in the typewriter are prone to wear from intensive work and require proper care.

What is a trimmer for grass?

Trimmer for grass. a compact car for a beard and mustache. But, the design has some features, thanks to which the removal of hairs is possible from open, closed, inaccessible, sensitive sections of the face, neck.

The number of operations ongoing depends on the device, the presence of nozzles in the kit. Regardless of the configuration, any model quickly, carefully:

• will haircut a beard and mustache;
• will put the bikini zone in order;
• will remove hairs from the nasal sinuses, ear shells;
• levens a fishing line for a trimmer of eyebrows if necessary.

Modern models have a wider functionality: self.substituting knives, a built.in vacuum system for absorption of cut hairs.

Reference! When choosing, it is recommended to take into account the technical parameters of the device, read the management guide, also for yourself the purpose of the purpose of the device, the degree of necessary intensity when hairy haircut.

Varieties

Given the rating for 2018, the best trademarks of the Trimmers are recognized:

with quite wide functionality. The characteristics that deserves attention include: the presence of a bilateral blade to eliminate hairs up to 5 cm in length, equipping the device with 4 nozzles for cutting hair and beard in different ways, cleaning the working head in a wet (dry) method, the presence of a built-in battery for the device for operation Autonomous. This is an ergonomic, stylish, easy.to.operate trimmer for grass with the possibility of using a professional device when exit from a shower. In arsenal. 1 working nozzle. The trimmer for the grass did not differ in high functionality, but is able to remove the hairs up to 21 mm in length. In the configuration. a working head with the ability to work in 1 of 7 modes, taking into account the length of the beard, the battery capacity to ensure uninterrupted operation in autonomous mode. This is a simple device with the presence of an energy.intensive built.in battery affordable, reliable, inexpensive trimmer for grass for beard. Deserved the recognition of the brand BT 320. The components include: a working nozzle with exhibiting up to 20 different positions, the ability to cut hairs up to 10 mm from different parts of the face due to the easy settlement of the working head, giving the right position. The machine is weightless, comfortable when holding in your hands. Equipped with sharp blades. The work of the device is possible in wet, dry mode. With deduction on the 4th line of the rating, thanks to a high.class device. E875E brand device is classified as a professional class. In the configuration. a working head with the ability to install in 15 positions for cutting hair up to 5 mm in length with removal in hard.to.reach places. The device is made of plastic. The device is cleaned in dry mode.
• Rowenta, in particular the TN-3600 brand device with a waterproof body. In the configuration. a rotating working head for haircuts of hair up to 5 cm in length. The device has an excellent device with impeccable work in 4 modes, up to 4-5 hours in a row, the presence of wear-resistant strong blades with a titanium coating. The device is convenient to care for, operation. One of the best trimmers with standard nozzles, a device for use as shaving of a beard and hair haircuts, regardless of length, can be used at the time of acceptance of the shower.

Suitable lubricants

If you choose which oil to lubricate the machine, then priority should be given to specialized products. Often manufacturers provide it with the device. Such oil is made of purified oil. It is a fatty fluid without a smell that differs from the machine analogue. In fact, such products are both lubricants and a means for cleaning and caring for knives.

The oil from Moser, which produces cars, is also popular. “Oster”, “Dewal” do not lag behind him.

In practice, hairdressers also use mineral or synthetic oils with a low viscosity indicator. Such materials are available in price and penetrate well inside the lubricants. Silicone lubricant (for example, Silicon-Electric Oil), designed for electric products, can also be quite effectively used.

It is strictly prohibited by vegetable oil lubrication. At best, the machine will jam, and in the worst. you need to buy a new. It is safer to work “for dry”. At home, when there are no lubricants at hand, it is permissible to use Vaseline oil or children, for example, Johnson Baby.

Lubrication algorithm

To lubricate the device yourself, you will need to go through a number of simple stages. To apply oil, you will need an oil or a syringe with a needle. The algorithm of actions during operation is as follows:

• With the help of a brush, clean the blades of the working tool from the hair remaining on them after cutting;
• Wipe the knives using soft wet wipes or a rag for this;
• According to the instructions to the device, a little oil is applied to the corresponding points (a couple of drops will be enough);
• In order for the lubricant to be distributed with an uniform layer on the surface of the knives, turn on the machine;
• wipe the surface of the tool to remove excess oil.

It is necessary to clean the machine from the hair thoroughly, because, mixing with grease, they will speed up the exit of the device. It is recommended to apply oil in three places: at the edges and in the center.

SCARLETT, VITEK, Philips and others are lubricated according to this scheme. Only the way of removing blades differs only. Also, some products have special holes for lubrication, while disassembling them is not required.

Apply oil directly to the comb is a mistake, because the remaining smallest particles of hair will quickly blunt the cutting edge of the tool.

The whole process of lubricating the haircut machine is shown on the example of the Moser 1400 in model

Lubrication of No hair haircuts with oil does not take much time. In this case, you should carefully treat the blades so as not to get hurt. Regular procedure is one of the factors that ensure the legal capacity of the device for a long time. Despite the wide range of products of this kind, the lubrication algorithm for different models is the same.

Buying a hair cutting machine will help to save significantly on visiting a hairdresser. In addition, this acquisition will facilitate the care of the beard and backed, and will also help the child to haircut in the conditions comfortable for him. An important criterion for choosing a suitable model is the material of the blades, because the speed and quality of the haircut depends on it. It is this element and its features that our article is devoted to.

How to lubricate the machine

First, the device must be cleaned as much as possible from the hair. Ideally, and should not stay at all, otherwise, having mixed with grease, they can harm the engine for hair cutting machines.

When the device is cleaned of garbage, wipe the knives with a damp cloth. Then you can apply a lubricant. It is better to do this with an oilcock, but if it is not at hand, then a medical syringe with a cut needle is suitable. With oil, you need to drip in the place of maximum contact of the rubbing surfaces, in the middle of the static knife and on the sides.

Now you should turn on the device for a short time. so that the liquid is distributed over the surfaces. Excess composition is wiped with a napkin. It is also worth adding oil inside the mechanism. If the design is not collapsible, then there should be special holes on the lid through which the liquid is filled.

Timely maintenance of the hair cutting device will significantly extend its operation. do not forget to lubricate the rubbing surfaces more often.

Silicone.based lubricants and petroleum jelly

Silicone lubricant is a universal composition that is in the Arsenal of almost any repair master. It is made of polydimethylsiloxan. hypoallergenic material suitable for caring for electrical devices. It differs in viscosity. It can be determined by marking PMS. 100, 200, etc.D. The larger the number, the higher the density. The indicator should not be too big.

Silicone lubricants can be stored for a long time. they will not thicken and will not lose properties. This is a convenient lubricant that does not cause skin irritation that protects the metal from corrosion. It can be considered an optimal alternative to special oils.

Vaseline.based lubricants can be found in pharmacies. If they are too thick (so often), they can be diluted with gasoline used in lighters. Vaseline lubricant is applied to blades with an oil or a syringe without a needle. The machine is thoroughly cleaned from the hair with a brush before processing.

How to clean and grease a hair cutter

Before cleaning and lubricating the hair cutting machine yourself, you need to perform a few simple actions. To apply the lubricant, you will need an oilcock, if it is not, then a syringe with a needle is suitable. The whole process of cleansing the device from the hair must be carried out very carefully so that the remaining hair, mixing with lubricant, does not disable it.

Slust of actions when lubricating the machine

This sequence is a certain algorithm of the necessary actions:

• a special hard brush, usually attached when buying a machine, clean the hair left after a haircut from all the blades of the device;
• Wipe the knives with a soft, damp cloth, preferably having an antibacterial effect;
• apply to the appropriate points for a drop of oil;
• turn on the machine for a few seconds for better distribution of oil along the cutting surfaces;
• Turn off the device, wipe all the surfaces with a dry cloth, removing excess oil.

What parts of the machine are applied to the oil

Lubricating parts of the machine, you can not pour or drip oil to any place. Lubrication needs to be processed only certain places of contact of the knives. Typically, oil designed for hair cutting machines is applied 1 drop to the next five points:

• 3 points on the gear side, in the place of the most dense contact of the knives, (2 along the edges and 1 in the middle);
• 2 points, from the side of the heel of the knives, also in the place of their most dense pressing to each other.

How to apply oil and how much it needs

It is best to lubricate the device with a special oil. If it is not at home, you can use the usual medical syringe. Droplets should be small. If you use a syringe, it is advisable to cut the needle to half. Then the droplets will be just the right size.

Advice! Before you start lubricating and cleaning the hair cutting machine, you must prepare in advance:

• a brush with a hard bristle;
• wet wipes, preferably with antibacterial effects;
• special liquid for washing blades;
• oil or special lubricant;
• Dry napkin or soft towel.

Suitable lubricants

It is better to use special oils for these purposes. Mineral, silicone and synthetic lubricants are suitable for lubrication. The main thing in this situation is that they have low viscosity.

People, showing their ingenuity, also use unusual materials to lubricate the machine. For example, petroleum jelly or baby oil. They cope quite well with the task. Some users opt for oils intended for sewing machines, since they are characterized by an affordable cost.

Important! Do not use vegetable oil for lubricating the haircut machine. You will only harm them the device. The device will surely jam or break.

Oil designed for lubrication of an electric machine, it is necessary that:

• clean the device from dirt;
• reduce friction, which is detrimental to knives;
• protect sharp elements from blunting;
• minimize the heating of the case;
• The device has served as long as possible.

Electric Procedure lubricant algorithm. general rules

To perform the procedure you will need an oilcock, you can also use a medical syringe. The working surface is recommended to be covered with unnecessary fabric or paper. In the process of lubrication, it is important to adhere to the rules common to any model of the rules.

After the haircut, you need to check the knives for hair residues and carefully clean. This procedure is best performed with a brush with a hard pile.

Important! The lubrication of poorly cleaned blades is fraught with quick breakdown of the cutting block.

So, the long service life of a hair machine for any price segment directly depends on the quality and timeliness of the care. It is better to lubricate the power tool specially designed for this oil. But when there is no required tool at hand, but there is a need for a process, oil can be replaced, but only for suitable compounds with low viscosity. You can clearly familiarize yourself with the process of lubrication of trimmers and haircuts for haircuts in the corresponding video.

How often to lubricate the machine

The machine must be cleaned from hair after each use. The gloomy machine is clogged and:

• The power of the motor sags, the device cannot cope with the hair, it can burn over time;
• The blades of the machine begin to “light” the hair;
• extraneous noise appears;
• a protective shutdown may work (burn the fuse).

Lubricate the device also after each haircut, in extreme cases, after two. If the parting lies for a long time without operation, it must also be lubricated before use.

Why is it necessary to lubricate the tool?

Oil for haircut machines helps:

• clean the working node from pollution;
• reduce friction between the tools when working tools, t. to. it destroys them;
• significantly reduce the speed of the cutting part;
• reduce the heating of the machine body;
• Increase the life of the instrument.

After using the oil, the haircut begins to pass well, without jerking.

As an option for maximum lubrication and cleaning, you can consider liquid for connecting nodes WD-40. It is sold in any store for motorists or even at outbuildings. The spectrum of action of the product is very wide, and it will not be difficult to find it. WD-40 is better to use with strong pollution of the machine. When working, the hands must be protected with gloves, since the liquid is aggressive. After lubrication, the cleaned tool must be wiped with a rag.

Consider further than to lubricate the haircut machine.

How to lubricate a haircut machine?

You go to the store and choose a high.quality hair cutter. Try the “new thing”: ergonomics, soft move, a large number of nozzles. what you need for work. Rejoice at a profitable investment, with pleasure you are engaged in hairdressing art but! Suddenly the device begins to give up positions. the result is no longer impressive, hairstyles are not as ideal as at the start of the use of technology.

A wave of indignation begins: “How so! Apparently, the machine is not so good! Houston, we have problems “. Is it so?

No panic! Even the coolest tool can suffer with improper care and operation. Hair cutting machines need regular lubrication. This procedure is very important for its excellent state.

Why do you need to lubricate the hair cutting machine?

Cars, like any other tool of the master, need to care. If you lubricate the device with special oil, then:

• The working node will not be polluted;
• reduce friction between knives (it destroys them);
• reduce the speed of the cutting parts of the cutting parts;
• reduce the heating of the case;
• Increase the total service life of the machine;
• make the move more smooth, soft.

Which oil to choose for lubrication of a haircut machine?

For hairdressers, you need to use professional care products. Special oil will be the best solution. It significantly prolongs the life of the knife block.

How to lubricate the tool correctly?

Get to know the rules for caring for a hair cutting machine:

• Start working with a new client without cleaning the device, you can’t. And this is a question not only of hygiene, but also a good condition of knives. After the haircut, always clean them from hairs residues. How? It is best to go with a brush with a hard pile.
• After wipe the working parts with a wet antibacterial cloth.
• Apply oil. Lubricate in the knife contact zone. These are three points on the gear side. along the edges and middle, as well as a drop under the heel of knives. Drops should be small. Use a special oil or a medical syringe with a half.cut needle.
• Now you need to turn on the machine. Read to five, turn off. Such actions will help the clock lubricate the necessary points.
• Wipe the machine.

Oils are multi.format. As mentioned above, it is worth using special means. If there is no one at hand, then you can try:

Attention! Do not use vegetable oils for these purposes. This will ruin the device.

The format is quite convenient to use.Such products help knives to remain sharp and workers longer.

Parimir has a spray for cooling and caring for the Parimir Prakm 01 knife blocks. It protects the blades from corrosion, cools and cleanses. And how great the mood raises the aroma Bubble Gum!

Also in the assortment of the brand there is a universal tool for caring for scissors and machines Parimir Prakm 02. It is also in the form of a spray. The product will protect the machine from such “troubles” as corrosion, heating. Regular knife processing will favorably affect the service life of the device. Suitable for scissors.

Fluids for flushing blades

To cleanse the knife blocks from small hairs, some masters use liquids. However, the modern beauty industry is ready to provide more functional means.

For comprehensive care for the tool, a tool for cooling, cleansing and disinfection 7 in 1 Mustang Professional Makm 02 is suitable. It acts in several directions at once: cools, deodorizes, lubricates, cleans, disinfects, protects against corrosion, extends the service life. Presented in the amount of 405 milliliters. enough for a long time.