How To Mow With A gas trimmer

Country notes Safety when working with a grass trimmer. How to properly mow lawns, slopes, tall grass with a trimmer. We clean and store petrol and

Flat lawn

If the site is large and level, and the grass is soft enough, then it is more convenient to mow along imaginary squares, mentally breaking the entire area into them. Having previously mowed the grass along the perimeter of the first, they continue to work along a tapering square spiral clockwise until the site is completely mowed. Then proceed to the next square. With this method, the cut grass always remains on the treated surface on the left side. In order to mow vegetation to the very root, it is necessary to keep the cutting plane at an angle of 30 °, with the tip of the fishing line almost touching the ground.

Of course, it is better to mow flat lawns with a trolley lawnmower, which allows you to make a smoother cut and collects the cut grass in a special grass catcher. The choice of such a lawn mower is described in this article.

How to mow with a lawn mower and safety

How to mow with a lawn mower correctly?

1. When working with a petrol trimmer, you should unload your hands as much as possible, for which all movements with a petrol trimmer should be performed with the body.
2. Move, working with the lawn mower, should be short. “duck”. Step.
3. Keep the cutting attachment at the same distance from the ground.
4. The thicker the grass or growth you are cutting, the more power the engine should run.
5. To reduce the load on the mower, you can try the following operating mode: driving to the right. The engine is running at full power, driving to the left. The throttle is released.

The safety rules when working with a mechanical trimmer are as follows:

1. Any actions other than mowing (checking the fullness of the gas tank, lubricating, replacing parts, visual inspection of mechanisms) should be performed only with the device turned off.
2. When mowing tall grass with a line trimmer, cut the top of the grass first and then the bottom. This will prevent the stalks of grass from wrapping around the line.
3. Do not use lawn mowers with rusted cutting blades. Therefore, trimmers should only be stored in dry rooms.
4. Do not use the trimmer immediately after rain or lubrication. You need to wait 30-45 minutes.
5. You should strictly adhere to the requirements of the instructions, which indicate the purpose of each specific cutting blade.
6. It is forbidden to sharpen the cutting tools yourself, as this may disturb the alignment of the discs, which will sharply increase the vibration loads on the lawn mowers.

How to mow with a lawn mower correctly. Expert advice

How to mow with a lawn mower? It seems that there is nothing difficult in this: you need to start this cutting tool, and then just carefully cut off the grass and weeds with the cutting edge. But, as they say, there are some nuances that will be discussed in this article.

So, for example, it is best to mow grass with movements from right to left. This is because the cutting edge of the trimmer rotates counterclockwise, which means that the grass will fall on the already cut.

But hay is best mowed with an eight-tooth knife, since a cutting tool with fewer teeth during mowing produces too many small cuttings, due to which the quality of the harvested animal feed is significantly deteriorated.

How to mow grass with a lawn mower: technique and features of mowing work

So, let’s take a closer look at how to mow with a lawn mower.

We have already said that the movement of lawn mowers should be performed from right to left, then the grass will fall on the already mown surface. But there are other nuances of working with a trimmer:

1. Mowing tall grass or cutting weeds with tough stems should be done in double strokes: from right to left, you cut the top of the grass, and backwards from left to right, you cut the bottom of the stem. When mowing tall grass using this technology, you will leave all the mown green mass on your left side.
2. The rules for mowing large areas recommend performing this operation in a square manner. By dividing the area into squares, you start moving from the outside towards the center.
3. Mowing grass on slopes is done as follows. Start mowing at the bottom of the slope, swath parallel to the slope, climb up a little and make the next swath, etc. With this technology, all the cut grass will fall down into the already cut area.
4. Mowing around obstacles, bushes and trees is done using the lawn mowers’ protection as a guide. The tool is guided around a bush or tree trunk, while the operator gradually moves around an obstacle.
5. Lawn grass should be mowed with a lawn mower equipped with only high-quality cutting tools. Otherwise, a large number of small blades of grass will not be mowed, but uprooted, due to which the lawn will quickly lose its perfectly well-groomed appearance.

How to properly operate an electric grass trimmer

When choosing equipment for a summer cottage, it is not always worth chasing powerful and dimensional devices. The power of the tool is undoubtedly an important parameter, but it obviously carries with it the increased weight of the device, its large size, as well as the high price and increased fuel costs. But that’s not the point.

If you have a small garden with densely planted fruit trees or a small lawn with flower beds and shrubs, then clearing it of weeds and carefully mowing the grass is clearly an overwhelming task for any lawn mower. In such cases, even a hand tool. An ordinary scythe will not help: you simply cannot swing it, bumping into tree trunks.

The ideal solution in this case is a good and inexpensive electric trimmer. It is so light, comfortable and easy to operate that it always becomes a favorite of women and the elderly. A lightweight, quietly humming electric motor, a handle with comfortable grips and a nylon line tucked into a spool are the main components of an electric trimmer.

Electric trimmer efficiency

A trimmer that works from a household electrical network is relevant on an area of ​​four to six acres, planted with trees, flowers, shrubs. It is convenient for it to neatly mow grass near the house or along the curb, mow paths, and an environmentally friendly motor that does not produce exhaust, gas and burning will even make it possible to remove weeds in any covered room. Greenhouse or greenhouse.

The trimmer cable limits the cutting radius, but can be extended with a standard extension. If this length is not enough for you, or the parameters of the electrical network do not contribute to the normal operation of the electric motor, then you can purchase a type of electric tool. A cordless trimmer. It works autonomously, the built-in battery lasts for half an hour or an hour of intensive work. Quite enough to mow the trees in the garden. The trimmer motor can be positioned at the top of the tool or at the bottom. Upper motor trimmers work well on bumpy and uneven terrain. They are also perfectly balanced and can handle tall and wet grass. No short circuits. The convenience of working with it is also increased by a single-shoulder loop, which is hung on the shoulder. The lower motor trimmer should only be used on dry grass and on level areas. Often it is the lower motor trimmers that run on a rechargeable battery.

How to use the trimmer correctly

The household trimmer is the easiest to use and at the same time very effective tool. It seems that there is nowhere easier. To plug in the tool and work. But still, there are some nuances that you need to know in order for the trimmer to work for a long time and efficiently.

1. Site preparation. It is necessary to carefully inspect the mowing area and remove all foreign objects. Stones, glass, wire, etc. Having flown out suddenly from under the fishing line during operation, such an object can cause injury.

2. Installation of the cutting system. There are low-power trimmers that can only work with a line, cutting soft and succulent grass. They do not need to install a cutting system. But some trimmer models with a motor of 1 kW or more can work with a knife. If there are tough weeds or even a small overgrowth of bushes on the site, you need to unscrew the working attachment nut and install the cutting knife. Then tighten the nut firmly with a wrench.

3. Before starting work. It is very important to wear protective goggles when working with the trimmer, because even if you have removed the area from debris, plant stems and grass can fly into your eyes. The same stems, grass and branches can injure hands, so it is advisable to wear gloves. We simply plug in the electric trimmer, but the battery trimmer needs to be charged for several hours before use. Then, if there is a shoulder attachment, we hang it on the shoulder, the knapsack. On both shoulders. We conveniently grasp the trimmer by the handles: grasp the D-shaped handle tightly with your palm, and grip the garden trimmer with a bicycle handle (U-shaped) firmly with both hands. The trimmer should be held over the grass so that the line spool or knife is parallel to the ground. We turn on the start.

4. How to mow correctly. The cutting mechanism rotates counterclockwise. Thus, in order for the cut grass to fall onto the already mown area, easily, with simple movements, we carry the trimmer in front of us, from right to left. To remove the remnants of the grass, you should make a movement in the other direction. From left to right. If the area is flat and large, break it into imaginary squares and mow, moving along the outside of such a square. If the plot is on a slope, then you need to start mowing from the bottom of the lawn, passing across the plot. In one direction. Having reached the edge, you need to go back and mow in the same direction, parallel. If there are many trees in the area, only cut with fishing line, otherwise you may cut the tree trunk with a knife. In such a garden, it is best to mow around the perimeter, bypassing the tree in a circle.

Five. Completion of work. Turn off the engine and remove the shoulder straps. It is not yet complete completion. It is necessary to carefully clean the spool and knife from the remains of grass. Then fold the trimmer, if telescopic or collapsible, and hide it until the next mow.

Helpful material to teach you how to start a naughty gasoline trimmer that doesn’t want to work!

The summer time has come, and lawn-mowers as usual rattled on the personal plots. Great tool, powerful and mobile. With the help of a gasoline trimmer, you can also cut the grass and get rid of the dried weeds. However, there are times when the lawn mower will not start, work intermittently or not at full capacity. There is certainly no time for work! And as they say, you pull the starter handle more than you mow.

Launching difficulties arise not only for seasoned lawn mowers, but also for new ones. How to be in this situation? There is only one way out. To heed the advice of experts and take advantage of their practical experience!

Gas trimmer loves cleanliness. It is necessary to monitor the cleanliness of the air filter and fuel. Gasoline bought at a gas station is better to stand for 2 days and pass through the simplest filter. A piece of bike cloth.

We check the electrical equipment as follows:

1. Unscrew the candle, inspect the gap between the electrodes. We can set the correct gap between the electrodes in the “old-fashioned” way. Take the razor blade, cut it in half and insert a homemade probe between the electrodes. If the blades fit tightly, then the gap is perfect.

2. Put the high-voltage wire cap on the candle and lean the spark plug against the metal surface of the engine. We pull the starter several times. If the spark hits one point well, then the gap is adjusted correctly. If not, the spark is weak or “wandering”, then it is necessary to re-adjust the gap between the electrodes.

 

Starting the trimmer for the first time

When everything has been checked and the prepared fuel mixture is poured into the tank, the moment comes for the first start of the trimmer before running it in. To do this, you need to perform the following manipulations:

1. Place the mower on a level, horizontal surface;
2. Move the choke control lever to the closed position;
3. We pump fuel into the carburetor with several strokes of the primer;
4. Turn on the ignition switch;
5. Smoothly pull out the starting cord until you feel resistance;
6. Then make 3. 4 sharp jerks with the cord until the lawn mower starts;
7. After starting, open the air damper.

First start-up and running-in of lawn mowers

Correct initial start-up and running-in of a lawn mower are very important steps in getting started with a new tool. On the one hand, they allow you to preserve the service life of a gasoline engine, laid down by the manufacturer, since at this stage, the grinding of moving units and parts takes place. On the other hand, the first necessary skills of working with a trimmer are acquired when it comes to the first tool in life.

• Preparing for the first start of the lawn mower
• Inspection of the lawn mowers gearbox and its lubrication
• Preparing the correct fuel mixture
• Starting the trimmer for the first time
• Let’s start running lawn mowers

Preparing the correct fuel mixture

Before starting the running-in of the new engine of the lawn mowers, it is also necessary to properly prepare the fuel mixture. As is known for two-stroke engines, it is prepared from special two-stroke oil and gasoline, taken in certain ratios. You can find out the proportions from the instructions that came with the tool or on the lubricant label. From the instructions, you will also learn the recommended type of fuel, as well as the recommended type of engine oil.

When going to run in a new lawn mower, many are faced with a problem in preparing the fuel mixture. And the reason for this is the disagreement in the instructions of the tool manufacturer and in the instructions of the engine oil manufacturer. The former recommend a 1:25 ratio. The latter recommend 1:50. Whom to believe? How to proceed?

According to experts, if manufacturers write a ratio of 1:25 or 1:30 in the instructions for a lawn mower, then most likely this is either a cheap tool with poor cooling, or the manufacturer does not know what kind of oil the consumer will add. But here you need to understand that an excess of lubricant does not in the best way affect the performance of the trimmer. Excess oil does not completely burn out when the engine is running. It cokes, clogs the cylinder and piston.

How to deal with this situation when running in a new tool? The ideal option would be to purchase exactly the oil recommended by the lawn mower manufacturer. In the case of run-in engines, when it is not possible to purchase the recommended oil, it is best to purchase a good Husqvarna two-stroke oil for the gasoline-powered tool of the same name. It is not cheap, but it lasts for a long time. It is necessary to stir it as written in the instructions on the bank.

Running in

Before starting operation, be sure to run in gasoline mowers. The operator turns on the engine, it should run for a while at idle speed. It is necessary to ensure that the engine does not overheat, there should be no load.

When running in lawn mowers, the load is gradually increased. If you start working at high rpm, the motor will not run in well, this will affect the further operation of the mower.

When you start it for the first time, you should not completely exhaust the temporary resource. After the engine runs at idle speed, you can proceed to treating the lawn. The mower should run no more than 15 minutes, after which the motor is turned off and it should cool down.

If you need to run the trimmer, the braid is first assembled. Then do test runs at least 3-5 times. If the engine is running well, proceed to mowing. At first, they work no more than 5 minutes, then the duration of work is gradually increased.

Mowing tall grass

If you need to cut tall grass, this is done in several passes. The lawn is processed 2-3 times. The rotating part is lowered from top to bottom, in this case, the grass is not wound around the reel.

The operator should be aware that grass wrapped around the reel will overheat the motor. If this happens, the mower is turned off and the coil is cleaned.

It is most effective to cut the grass with the ends of the line rather than the entire length. In the second case, the tool works worse, the motor may be overloaded. If you need to cut grass over a large area, tilt the trimmer towards the mowing side to increase efficiency.

How to put on a belt

If the tool has a shoulder mount, hang it on the shoulder before starting work. The trimmer is fixed on both shoulders if it has a knapsack mount.

The bicycle handle model is held with 2 hands, the D-shaped handle is wrapped around the palm. The belt must be worn so that it is comfortable, then the back will not get tired.