How to store motorcycles in the winter in the garage correctly. Preparing a cultivator and one -axine tractor for cold

Storage of lawn mowers in winter

With a trimmer, you need to be able to not only correctly contact, and correctly store. Clean and remove gasoline for storage since storing a trimmer for the grass is even very short. A gasoline trimmer for grass is a surprisingly necessary tool on how to correctly store fuel. Often owners of garden equipment, without thinking about the properties of benzo- or electric ships, simply throw the tool into the pantry and lock them on the castle. Under such conditions, there is a chance that the trimmer for the grass will break. Let’s figure out how to store a trimmer for grass correctly.

If you put a trimmer for the grass in a cabinet in a summer house for a week. this is one thing, but the preparation of the tool for the “wintering” in the garden house is completely different. Before prolonged storage, the electrimmer is checked by all wires, and the entire gasoline and butter are drained in a benzotrimer. However, some, on the contrary, do not advise doing this, in order to avoid drying out the gaskets in the mechanism. In our opinion, gasoline should still be drained-both from the engine and from the carburetor, because after 2-3 weeks a precipitate can form in the liquid, and this will lead to damage to the lawnmill mechanism.

The best place for storage will be a dry above.ground pantry or a loggia glazed with plastic. But any place is also suitable from open fire, isolated from large temperature changes, with normal humidity. If there are no options, and the humidity in the room is increased, it is worth covering the trimmer for the grass with moisture absorbers. This will save the device from freezing and icing. If you notice that the trimmer for the grass is frozen, it is worth moving it to another place, for example, to a wardrobe in a heated room. However, not every benzotrimer will fit in a wardrobe, this is more likely to refer to small portable and folding electric cos. Therefore, a benzotrimer can be moved with a light soul to a garage.

Bracket for storing motorcycles

The channel exists on the donations of the audience: PayPal: [Email Protected] Yandex Wallet: 4002930562895 Sber.

What will happen if the storage conditions are violated?

Typically, all storage conditions of the device are indicated in its instructions. Therefore, you need to carefully read it, and not throw it right into the garbage bucket. If, for example, a trimmer is ethnic for grass in the cold, it can owe, and when defrosting, the contacts will shorten due to accumulated moisture. Such a breakdown is difficult to fix even in the service center. A gasoline trimmer for grass is a surprisingly useful tool on how to store fuel correctly. The metal parts of any trimmer for grass can be rusted due to humidity, they will have to be changed, or even buy a new trimmer for grass.

If a benzotrimer is stored near the stove that is often drowned, an explosion of residual gasoline vapor is possible when the spark enters, or ignition. Not only a trimmer for grass can suffer here. but the entire garden house or cottage. After all the options for storage are considered, and the most suitable one is chosen, a logical question arises.

Better, of course, in the factory. If inside is polystyrene, then you are very lucky, it absorbs water. It is not worth storing a trimmer for grass in a plastic film, it causes condensate accumulation. In the case when the factory packaging is irrevocably lost, you can store a trimmer for grass in the size of a box of cardboard, plywood or boards. You can wrap the tool with a “breathing” fabric. for example, from natural fibers. Transport trimmer for grass also needs to be in packaging.

We have already mentioned the packaging. If the trimmer for the grass is folding, it should be folded. From a carburetor and a benzotrimmer motor before transporting in the trunk, you need to drain gasoline and oil. The trimmer is an ethletric for the grass to check for the presence of a static charge of electricity, if you touch a light shock when touching, laying an electric car on the first seat of a car is not worth.

And, finally, good advice: if you have purchased an expensive device and do not want to spend money down the wind, buying a new trimmer for grass every year, be kind to observe all the rules of storage and safety precautions.

They are powerful and productive garden units that are used to mow grass, weeds of varying degrees of stiffness and young branches of trees and shrubs. These tools are able to make life very easier for the owners of country houses and cottages, in a short time and with slight efforts to simply and quickly improve the lawn, garden and personal plot, garden. What could not have been done using a regular braid for grass.

Regardless of which manufacturing company produced the lawn mower that you acquire, on the proper care of it, and the same storage, and its service life depends.

What needs to be done before starting

Nowadays, the lawn mowers produce two main types: electric and gasoline.

Basin lawn mowers are very convenient for mowing grass at a distance remote from the house. Their main plus is mobility, since they are not attached to a certain place, you can move to the farthest corner of the site and work there. Gasoline is much more powerful than electric ones and are able to mow without a break for many hours (does not affect the engine). The gasoline lawn mowers have several times higher and the speed of mowing grass along with electric.

Before turning on the gasoline, you should first check the presence of fuel and lubricants, and most importantly, oil, because, if it is not enough, then the engine can sharply jam it during operation, and you have to spend large funds for repairs.

Electric lawn mowers are less noisy, unlike gasoline, also cleaner (more environmentally friendly) and more economical in use (especially on condition of inexpensive electricity fees). The most important drawback of such a lawn mower is a limited mobility by connecting a cord to a power source, and the extension cord is often confused and clings to everything.

Before launching an electric lawn mower, you should first check if the extension cable itself and the power cable itself are damaged, as well as the operation of the outlet.

For an electric mower, there is a very important point. in no case do not use it during dew or after rain. It should be used only on dry, devoid of moisture areas.

How to store a lawn mower in winter

This unit is sent for “well.deserved rest” in the fall, and is extracted closer to the end of spring. Due to such a long “downtime”, the requirements for the conservation of lawn mowers are very high.

The main elements have a benzogazonocoster. this is an engine and cutting parts. They should pay maximum attention:

• The first condition for the correct storage is a room with a humidity of not more than 70%, as well as the absence of sharp temperature changes that increase humidity;
• If you worked a lot of a mower, particles of grass, and with them moisture could get to the internal parts of the device. Therefore, be sure to wash, clean and dry the knives and other details in the reach. Remove the remaining grass from the body, exhaust pipe, engine cooling radiators, etc.D.;
• Opinions were divided by the fuel. Some of the summer residents drain its remnants and wrapps the gas tank dry so that condensation does not form during the winter. The other half, on the contrary, fills the tank to the edges and leaves for the winter in this form. However, in this case, poor.quality gasoline can give a precipitate, which makes it difficult to launch the engine in the spring. It is still easier to remove the remaining fluids from the carburetor than to clean it from plaque and sediment, so we recommend the first option;
• Inspect the cutting knife. does it require repair and sharpening. In any case, remove and imprison it for the winter. If necessary, consult a specialist;
• The oil level should comply with the recommendations of the instructions for operating (for 4-stroke engines);
• Keep the lawn mower so that its wheels do not contact with the floor, or in a suspended position, or on stands.

Before cleaning the unit for the winter, check the integrity of all contacts and inspect them for oxidation and rust. The rest of the electric motor does not require any special conservation measures. Rub the battery for the winter, clean the case, deck and knives from the grass and, if necessary, imprison them.

This unit is sent for “well.deserved rest” in the fall, and is extracted closer to the end of spring. Due to such a long “downtime”, the requirements for the conservation of lawn mowers are very high.

Storage features

There are two main types of motorcycle. gasoline and battery. The rules of their storage are mostly convergen for some nuances. In any case, the conservation should begin with thorough maintenance and preparation of the unit.

Training

Preparation of a benzotrimer begins in this way:

• Fuel and butter.
• Let the apparatus work at idle so that it consumed all the fuel left in the carburetor.
• Spin and inspect the spark plug. The electrode should have a reddish color. If there is a car, the candle should be cleaned or replaced.

Eletric trimmer for grass should begin to be prepared for conservation as follows:

• Remove the battery. It must be stored separately in a cool place, but not at minus temperature.
• Check the condition of the wiring and contacts. If there are damage to the wiring or weak contacts, they need to be corrected.
• Check the condition of the brushes. If they have worn out, it is necessary to replace.

Further, the rules are the same for both types of motorcycle:

• Remove the remaining grass. She can accumulate between fixed nodes and knives. Blades also need to be carefully cleaned. If there is organic pollution on the case, they must be carefully removed.
• Dismantle the cutting knife. Check it for mechanical damage. If there is a part, be sure to be replaced, this can be done immediately or before the next season. Store a knife separately.
• If the lawn mower is equipped with a trimmer cord (fishing line), it should be dismantled and keep in a wet place until the next season. Before the new season for several days you need to leave in clean water. Thanks to this, the fishing line for the trimmer will remain elastic, which will extend its service life.

Where and what to store

It is extremely recommended to store motorcycles in limbo. The steering wheel often interferes, so it can be dismantled or simply turned the other way. As for the choice of place and packaging, the following options can be distinguished:

how to store a lawn mower in winter (conservation)

• The optimal storage location is a garage or a separate building for garden equipment. The main thing is that the room is dry and well ventilated.
• If there is no separate building, a trimmer for the grass can be kept in the pantry of the house or apartment. It is desirable that the room is not very dusty, which is especially important for electric motorcycle. A large amount of dust absorbs moisture, as a result of which it begins to conduct electric current, which is fraught with a closure.
• It is better to use factory packaging in which a trimmer for grass was sold. Very good if it has a foam, it will absorb excess moisture. In such a package, the device is not necessary to hang.
• If there is no factory packaging, you can use a cardboard box of a suitable size.
• You can apply a suitable cover of dense fabric, for example, tarpaulin. In such a package, a trimmer for grass will be conveniently hanging on the wall, to save space.
• You can build a box of boards or plywood. However, in such a box, the lawn mower will take up a lot of space.
• Trimmer for grass can be wrapped in a breathable fabric.
• If there is no packaging at all, it is recommended to store the device in a suspended form. This will protect the details from mechanical damage and will save place. But, it is important that there is no dust in the room, especially from building materials. For suspension, it is enough to mount a hook of the corresponding size into the wall.

Useful tips

To avoid premature failure of a trimmer for grass, follow the following recommendations:

Sooner or later, the season ends, trimmers for grass and other equipment go to long.term storage to the far corner. In order to use the tool next year without problems, it is necessary to perform several simple manipulations, so to speak, to preserve a gasoline trimmer for grass.

And storage in a room with constant temperature and normalized humidity will help to save some bearings. Lubrication and cleaning of some elements are also necessary. For storage, it is better to use heated rooms: warm garage, pantry or insulated balcony.

Operation of chainsaws in the cold season: the main points

There is always a task in the household for chainsaws, so sending it to the “winter vacation” is not always rational. In such cases, the conservation of the tool is not carried out in full, t.e. Without complete disassembly.

The cold makes it difficult to launch gasoline engines: the fuel evaporates poorly, so if you open the air damper, the chainsaws or it will not be started at all after the first clocks, or it will stupid immediately. As a result, it will have to warm and start on the suction, as a result of which there is a risk of filling the candle with gasoline. All this takes too much time and leads to clogging and reducing the service life of individual tools.

If you plan to work as a chainsaw in the winter season, store it, and, in particular, the fuel mixture, should be in a well.ventilated, dry and warm, in extreme cases of an unheated room protected from external atmospheric effects.

Before starting work, you should make sure that the fuel has sufficient temperature for fire, and the oil in the lubrication system of the tool is normal viscosity. Separate models of the chainsaws are equipped with a hot air supply system to the carburetor from the cilia of the cylinder cooling, which reduces the risk of freezing of the air filter and prevents the formation of condensate on the carburetor itself.

Run the saw in the cold with a closed throttle, after checking the quality of the lubricant and the stretch of the chain. After completing the work, you cannot immediately enter the tool into the room. This is guaranteed to lead to the appearance of condensate, which is why you will have to remove it, disassemble and clean it.

So that the oil does not thicken in the cold, it must be diluted a little with gasoline. This will ensure uniform lubrication and stability of the chain tension.

General rules for conservation of technology

Any tool, regardless of the type and purpose, before laying on storage, you need to wash, dry and inspect the details for wear and replacement. There is nothing worse than moisture that fell into mobile or vulnerable details and mechanisms. Freezing in an unheated room, it turns into ice and damages the elements of the system. It is also advisable to drain gas tank gasoline for fire safety reasons. But for the clock, other recommendations. the equipment cannot be left “dry”, so the oil is not removed for the winter, but they are changed.

When stored, fold the equipment as indicated in the operating manual

The cutting parts (such as lawnmand knives) should be sharpened, and hinged joints should be cleaned of dust and dirt and grease. Check the condition of the fasteners and power cord of the power tool, if necessary, replace them without leaving until spring. Next, we consider each type of technique and the requirements for its conservation in more detail.

How to store a gasoline trimmer for grass and other types of motorcycle

At the end of the cycle of articles about motorcycles, we decided to move a little from the questions of their choice and direct operation and talk about how to store a gasoline trimmer for grass and other types of braids in the off.season, as well as how to properly care for them in between the span. Compliance with these recommendations will significantly increase the life of the equipment and reduce the likelihood of breakdown.

Useful tips

To avoid premature failure of a trimmer for grass, follow the following recommendations:

What documents to look for? To arrange a garage according to an amnesty will help:-any decision of the authority (including Soviet times), confirming that you were once provided for a plot for a garageany decision of the plant, factory, collective farm, state farm or some other enterprise (which organized the garage cooperative) with the same meaning.

This can be done in the same way that you transferred to the documents. Or order it yourself through the portal what else needs to be done? The last stage remained. to issue the ownership of the garage and the land under it. For this you return to the local administration, that is, your municipality.

Proper storage of a benzotrimer (motorcycles, lawn mowers)

Sooner or later, the season ends, trimmers for grass and other equipment go to long.term storage to the far corner. In order to use the tool next year without problems, it is necessary to perform several simple manipulations, so to speak, to preserve a gasoline trimmer for grass.

And storage in a room with constant temperature and normalized humidity will help to save some bearings. Lubrication and cleaning of some elements are also necessary. For storage, it is better to use heated rooms: warm garage, pantry or insulated balcony.

Grinders (shredders, crushers)

Garden grinders, both gasoline and electric, require minimal maintenance. Before sending the crusher for the winter holidays, you need to do the following:

check the wire and extension cord for damage;

replace worn and damaged parts;

clean the unit using warm wet fabric and soft brush;

Gently take out the blade, clean, replace or sharpen if it is dull;

shake a bag to collect mulch well.

Keep the grinder in a dry room. garage or warm shed (air temperature should not fall below.10 ° C). To protect the technique from scratches, you can close it with a corrugated cartoon or air-pussy film.

General rules for conservation of technology

Any tool, regardless of the type and purpose, before laying on storage, you need to wash, dry and inspect the details for wear and replacement. There is nothing worse than moisture that fell into mobile or vulnerable details and mechanisms. Freezing in an unheated room, it turns into ice and damages the elements of the system. It is also advisable to drain gas tank gasoline for fire safety reasons. But for the clock, other recommendations. the equipment cannot be left “dry”, so the oil is not removed for the winter, but they are changed.

The cutting parts (such as lawnmand knives) should be sharpened, and hinged joints should be cleaned of dust and dirt and grease. Check the condition of the fasteners and power cord of the power tool, if necessary, replace them without leaving until spring. Next, we consider each type of technique and the requirements for its conservation in more detail.

Serious technique: storage of cultivators and motoblocks

A large number of details and not the complete accessibility of all parts of this technique does not always allow a full preparation for winter storage, but it is necessary to do several stages of preparation:

• First of all, it is necessary to prepare the engine. After the fuel is merged and the remains are developed, you need to change the oil while the engine is still warm.
• We clean the filters: we update paper, my foam rubber, dry and soak in machine oil. We clean the fuel filter.
• The spark plug must be cleaned, dipped in gasoline. While it dries, fill the oil into the cylinder and distribute it using a thicket of shaft. After wrap the candle back.
• The engine and muffler are thoroughly cleaned of contaminants. The gearbox should not be cleaned with metal scrapers, you can damage protection and get consequences in the form of rust. It is better to use wooden devices, washing all the elements. After contacts of parts with water, they need to be dried;

Where to store: options and necessary conditions

Sarai or equipped housekeeping block is on the house territory of almost every summer resident. These storage places are the most common. The main conditions for storage of gas technicics in sheds or utility rooms are low humidity and stable temperature without sharp jumps.If the room is insulated, it will be an additional plus.

Another place for storing benzotechnics is a garage. Do not place the equipment close to the car, and also, by suspending it, you need to make sure that in the event of a fall it will not touch the car.

This method is not very popular in the countries of the post.Soviet space. But if there are no other options, find the company that provides these services is possible.

What you should pay attention to: